vestal merlin
Before I return this Zigbee device I thought I'd post here and see if anyone has any ideas for me to try.
I've read several posts online about devices DROPPING, but can't find much about not being able to add a device at all.
I just received a "ZigBee 3.0 LED Controller C01Z Single Color PWM LED Strip Bulb Dimmer"
https://www.amazon.com/dp/B0CBBCQ2XX
On the device it says "Short press the set button for 4 times to pair zigbee network" - easy enough
Here's what a did:
- I went into HA and started the Add Device process in ZHA
- pressed the set button 4 times (tried fast and slow)
- The ZHA device search page never updates (i.e., device not found)
And some things I've tried
- I've confirmed the device has power by connecting an LED strip to it and it lights up.
- ZHA reports it's status as "online"
- Holding the device close to HA Yellow and also several feet away
- Changing the Zigbee channel in ZHA
- Rebooting HA Yellow
There aren't any status LEDs on the Zigbee device so I'm not receiving any feedback from it.
