karmic shard
So, I updated to HA 07.01, and I guess Z2M updated as well, but since then, even if Z2M do list all my zigbee devices without issue, turning devices on or off has absolutely no effect on them. result ? I cannot use any switch, not enable any light scene !
I started trying to put an electrical plug off, and noticed it had no effect at all. basically, my house is fully dead atm...
anyone else noticed this ? Is it something that needs an upcoming update ?
here is what plug-in version I am using :
Zigbee2MQTT version
2.5.1 commit: unknown
Coordinator type
EmberZNet
Coordinator revision
7.4.4 [GA]
Coordinator IEEE Address
0xe0798dfffe06a3c5
Frontend version
0.9.16
zigbee-herdsman-converters version
23.69.0
zigbee-herdsman version
4.3.1
Stats
Total 110
By device type
Router: 70
End devices: 40
By power source
Mains (single phase): 73
Battery: 36
undefined: 1
By vendor
IKEA of Sweden: 52
_TZ3000_gjnozsaz: 12
_TZ3000_w0qqde0g: 12
Signify Netherlands B.V.: 9
eWeLink: 7
innr: 4
SONOFF: 3
LUMI: 3
_TZE200_b6wax7g0: 2
_TZE204_dqolcpcp: 1
Philips: 1
3A SMart Home DE: 1
icasa: 1
_TZ3000_ysiog9xi: 1
undefined: 1
By model
TS011F: 24
ROM001: 10
TRADFRIbulbT120E27WSopal470lm: 7
TH01: 6
TRADFRI bulb E14 WS globe 470lm: 6
TRADFRI bulb E27 WW globe 806lm: 5
TRADFRI bulb GU10 W 400lm: 5
PARASOLL Door/Window Sensor: 5
INSPELNING Smart plug: 4
TRADFRI on/off switch: 4
RODRET Dimmer: 4
TS0601: 3
ZBMINI-L: 3
SP 120: 2
SP 220: 2
TRADFRI bulb E14 W op/ch 400lm: 2
TRADFRI bulb E27 CWS 806lm: 2
TRADFRI bulb E14 WS opal 400lm: 2
lumi.weather: 2
VALLHORN Wireless Motion Sensor: 1
TRADFRI transformer 30W: 1
TRADFRI bulb E27 W opal 1000lm: 1
TRADFRI bulb E27 WS opal 980lm: 1
TRADFRIbulbE27WSglobeopal1055lm: 1
LXN56-LC27LX1.3: 1
TRADFRI bulb E27 WS globe 1055lm: 1
DS01: 1
lumi.sensor_magnet.aq2: 1
ICZB-IW11SW: 1
TS0001: 1
undefined: 1
and my HA version :
nstallation method
…
Core
2025.7.1
Supervisor
2025.06.2
Operating System
15.2
Frontend
20250702.1
thanks !