LinkPlay Loses track of selected source on Arylic UP2STREAM_AMP_V4

[strong trench]

I have a couple of Arylic Up2Stream Amp V4 devices. When changing from Bluetooth source to Wifi/Network, the source updates on the device but not in HA. As it still believes it is in Bluetooth mode, I cannot change back to Bluetooth from Wifi/Network mode. The status updates properly once I actually stream something over Network.

This appears to be an issue where the Arylic device returns a "mode" of "0" instead of "10" for network when you switch, and only updates to "10" once something starts streaming. The integration seems to ignore the "0" mode and remain in the last mode (41 for bluetooth) in the HA interface until it sees the mode of "10" sent.

I am wondering if I should bother putting in an issue on Github for this, or if this would just be considered an issue with the Arlyic firmware.

[mental hound]

its probably worth putting an issue in, with as much info as you can etc... is likely to get some more eyes on the problem and maybe someone has an idea to solve/workaround the problem. worst case you get a "we cant solve this" response... but that's okay too.