Unable to connect HA Voice PE to network | Home Assistant | Page 1

weary magnet May 31, 2025, 5:10 PM

#

On Android via Galaxy S23 Ultra. Network is UniFi Wifi6 APs. HA runs as a docker on Unraid
Both my 5Ghz and 2.4Ghz networks share the same SSID, but devices don't have a problem connecting to the 2.4 when they only support that. I've followed the instructions and granted permissions, also turned off my 5Ghz wifi. It will just sit there on my phone when I try to add it saying Connecting... for a few minutes, then eventually goes away and I click add to do it all over again. I've power-cycled it as well. It doesn't show up on my PC under available bluetooth devices which I found odd. Out of ideas and could use some help

latent notch May 31, 2025, 5:17 PM

#

weary magnet On Android via Galaxy S23 Ultra. Network is UniFi Wifi6 APs. HA runs as a docker...

i suggest pluging it into a desktop and reinstalling the firmware using this tool as per instructions here

once firmware is installed you will be able to configure network creds on the tool. hopefully this will connect it to the network and it will be picked up by HA directly over network instead of BT

Home Assistant Voice PE

Install firmware on Home Assistant Voice PE.

weary magnet May 31, 2025, 5:22 PM

#

Thank you, that worked!!

latent notch May 31, 2025, 5:33 PM

#

awesome!

weary magnet May 31, 2025, 5:35 PM

#

So after it was added to ESPHome, step 7 never happened here:
https://support.nabucasa.com/hc/en-us/articles/25918770371229-Getting-started-with-Home-Assistant-Preview-Edition
I see logs appearing when I press the button in HA, but the LED on the device itself is solid red. All entities say "This entity is unavailable"
I don't see how I can trigger step 7 wizard manually. Do I need that or should I just setup the other integrations?

latent notch May 31, 2025, 5:44 PM

#

weary magnet So after it was added to ESPHome, step 7 never happened here: https://support.na...

in the esphome integration select the device. then there is a button in the device info section to start the wizard

#

#

you may also have to remove and readd the device

weary magnet May 31, 2025, 5:45 PM

#

Not there

latent notch May 31, 2025, 5:46 PM

#

ok on the esphome integration page hit the 3 dots and delete the device

#

weary magnet May 31, 2025, 5:48 PM

#

Yes deleted it and it instantly appeared again to add it. I added it again and the device page is still the same as above. I'm running 2025.5 HA docker

latent notch May 31, 2025, 5:49 PM

#

delete it and then restart home assistant

weary magnet May 31, 2025, 5:49 PM

#

ok

latent notch May 31, 2025, 5:50 PM

#

also just to comfirm, you havent used the esphome builder tool at all have you? just home assistant and the regular integration

weary magnet May 31, 2025, 5:56 PM

#

I updated to 2025.5.3 hotfix and the wizard popped up now after adding it back in

weary magnet May 31, 2025, 5:57 PM

#

latent notch also just to comfirm, you havent used the esphome builder tool at all have you? ...

Not sure what that is so I don't think so

#Unable to connect HA Voice PE to network