Argon One case power button and fan controls | Home Assistant | Page 1

I have an Rpi4b in an Argon One case and would love to program the power button to do a soft shutdown and also setup the fan controls. I've tried many of the addons but I can't get it to work since (I believe) the I2C integration in HA no longer works or I'm doing something wrong here. I've tried the I2C addon (https://community.home-assistant.io/t/add-on-hassos-i2c-configurator/264167) and also manually enabling I2C (https://www.home-assistant.io/common-tasks/os#enable-i2c) and the Argon One addon always says I2C is not enabled.

This is the Argon One addon I've tried: https://community.home-assistant.io/t/argon-one-active-cooling-and-active-linear-cooling-addon/262598

I found this, but it’s for Rpi OS not HA: https://core-electronics.com.au/guides/argon-one-raspberry-pi-safe-shut-down/#:~:text=All Argon ONE Cases for,up in an aluminum case

Can someone point me to something that might help? Would very much appreciate it!!!

Home Assistant Community

[add-on] HassOS I2C Configurator

HassOS I2C Configurator This project enables the Raspberry Pi I2C bus from an addon. You can connect an SDCard and up to two hard disks or USB drives, which are detected as sda or sdb, and they will all have I2C enabled when you click start. About This project is a part of my HassOS Configurator project. The goal of this add-on, similar to r...

Home Assistant Community

Argon One Active Cooling and Active Linear Cooling Addon

Currently only v1 and v2 are supported. V3 is not supported. This is an addon for Argon One in Home Assistant. It’s essentially a script that runs in a docker container. It enables and automates the Argon One Active Cooling System with your specifications. Know your options There are two addons to choose from Active Cooling, and Line...

Home Assistant

Common tasks - Operating System

Common tasks for Home Assistant Operating System

Core Electronics

Safe Shut Down Button With Argon ONE Case For Raspberry Pi - Tutori...

All Argon ONE Cases for the Raspberry Pi 4 Model B have formidable feature sets, with my personal favourite feature being a safe On and Off button. Once the Pi has been installed to the case you can obtain full On and Off functionality to the button by entering a single line into the Raspberry Pi terminal. Then after a reboot, the case will be ...

#Argon One case power button and fan controls