obsidian ingot
Hey,
i need HELP. I have Home Assistant 2025.3.3 runnig on a RaspberyPi5 with a Sonoff Zigbee 3.0 P Dongle. I recently tried to connect a simple USB Microphone to it (The USB microphone works fine when i connect it to my windows 11 computer). My goal was to setup the voice commands. But i noticed that once i connect any USB device to the rpi that the zigbe dongle doenst get recognized as long as a second usb device is connected.
Can somebody explain to me why this is and help me to fix this?
Here is a part of dmesg output
<3>[3658486.838203] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -110
<3>[3658495.911551] xhci-hcd xhci-hcd.1: Abort failed to stop command ring: -110
<3>[3658495.931729] xhci-hcd xhci-hcd.1: xHCI host controller not responding, assume dead
<3>[3658495.931742] xhci-hcd xhci-hcd.1: HC died; cleaning up
<4>[3658495.935638] xhci-hcd xhci-hcd.1: Timeout while waiting for configure endpoint command
<3>[3658495.935661] usb 3-1: can't set config #1, error -62
<6>[3658495.935786] usb 3-1: USB disconnect, device number 3
<6>[3658495.938525] usb 3-2: USB disconnect, device number 2
<3>[3658495.941305] cp210x ttyUSB0: failed set request 0x7 status: -19
<3>[3658495.941323] cp210x ttyUSB0: failed set request 0x12 status: -19
<3>[3658495.941327] cp210x ttyUSB0: failed set request 0x0 status: -19
<6>[3658495.941531] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
<6>[3658495.941799] cp210x 3-2:1.0: device disconnected
USB Microphone - https://www.amazon.de/dp/B01KLRBHGM?ref=ppx_yo2ov_dt_b_fed_asin_title
Host HW - Raspberry Pi 5 8 GB
Power Supply - offical Raspberry Pi 5 27W USB-C (black)
Versions
Core - 2025.3.3
Supervisor - 2025.03.2
Operating System - 14.2
Frontend - 20250306.0