modern flume
Hello,
I am relatively new to Tasmota and want to start a project.
I have a 16-channel relay with Tasmota installed, and the bits are inverted.
I need these relays for my garden, where I have 2 garden sprinklers and 1 water pump. They should work with toggle buttons.
Inputs:
Sprinkler 1
PCF8574-1_INP#D7 goes from 1->0 → Outputs 1 and 5 turn on.
PCF8574-1_INP#D7 goes from 0->1 → Outputs 1 and 5 turn off → After 5 seconds, Output 2 starts → After 5 seconds, Output 2 turns off.
PCF8574-1_INP#D6 → Turns Output 2 on.
Sprinkler 2
PCF8574-1_INP#D5 goes from 1->0 → Outputs 3 and 5 turn on.
PCF8574-1_INP#D5 goes from 0->1 → Outputs 3 and 5 turn off → After 5 seconds, Output 4 starts → After 5 seconds, Output 4 turns off.
PCF8574-1_INP#D4 → Turns Output 4 on.
PCF8574-1_INP#D3 goes from 1->0 → Turns the pump on (Toogle).
rigid flower