past root
hey everyone - im looking to integrate the Shelly with my Electric gate. The gate has a two button controller, and the buttons do the following:
Button 1
Press 1 > Open both gates
Press 2 > pause gates/Stop gates in current position
Press 3 > Close both Gates
Button 2
Press 1 > Open one gate only (for postman entry)
Press 2 > pause gate/Stop gate in current position
Press 3 > Close that one Gate
So my controller unit on the gate itself looks like this, with the following ports. As the gate has two funtions, button 1 and button 2, this matches up to the M1 and M2 on the diagram.
What im wanting to know is, if i hook up the 2 x Shelly 1 Plus as in my paint drawing, will this work? I'm hoping a shelly guru can help me out here
woven oak