west cairn
What are some good settings for a snappy experience with the fan switch. I only have one issue where the switch is too bright when trying to sleep since i keep my fan on when i sleep but i dont want it to always be dim when its on. Only when im sleeping
west cairn
Those are the settings i have but i dont really like them
valid wedge
Use the Inovelli documentation at: https://help.inovelli.com/en/articles/8231399-blue-series-fan-switch-parameters . Unfortunately, there is no documentation that tells what settings within HA correspond to the numbered parameters in this document.
I use these parameters so that the light bar provides confirmation of a change. 5 seconds after the paddle is released, the light bar goes dark. No automation required. Note that the numbers in parenthesis are the parameter numbers in the Inovelli docs.
Default all LED off color(96): 255 (white, since it's never used)
Default all LED off intensity(98): 0
Default all LED on color(95): 81 (green)
Default all LED on intensity(97): 0
Load level indicator timeout (17): 5 (seconds)
Button Delay(50): 2 (200 msec) starts the fan 200 msec after the paddle is released (plenty fast for me) and allows multi-tap scene control from the paddle, as described in the Inovelli docs.
My fan is a conventional AC, not smart. Quick start time(23): 4 (seconds) gives the fan full power for 4 seconds when you increase speed, which starts it faster, especially when starting at low speed and is probably less stressful on the motor.
Output mode (258??): Dimmer sets it to ceiling fan (multiple speed) mode rather than single speed mode. It would be nice for this to be corrected in the HA parameters.