#Log Filled with "Failed to read from sensor due to I2C error 3" on Emporia Vue Gen3

1 messages · Page 1 of 1 (latest)

minor cargo
#

I have an Emporia Vue Gen3 that I flashed to ESPHome. When I install the yaml I get a bunch of errors during the install, then the log just fills with the same error at a rate of like 10 per second.
I am getting data though there does seems to be some issues, particularly around the Phase Power, Total Faily Energy and Total Power near the bottom.
I'd appreciate any help figuring out what's going on.

Note: Circuits 2, 5, 6, 7 are showing 0s. I'm still mapping out what those are actually connected to, so I can't say if there is an issue with them or not at this time.

📎 emporiavue.yaml Screenshot_4.png
frail talon
#

may be this https://community.home-assistant.io/t/failed-to-read-from-sensor-due-to-i2c-error/783170/2

Home Assistant Community
Failed to read from sensor due to i2c error

I experienced the same thing and also rolled back to fix this on my Vue2. Side but related question, I have about 15 ESPHome devices and they all seemed to upgrade to 2024.10.0 fine except the first of my 3 Emporia Vue devices. After the first one presented the error I did not do the others 2 vue devices and decided to roll back. I rolled bac...

#

make sure you have the right ic2 settings