real sluice
I have no idea why, but I have 2 FireHD 10 tablets wall-mounted with power ran via USB to an Anker power bank and they wont stay fully charged. They seem to just constantly deplete the battery, no matter what settings I use on the tablet and in Fully Kiosk Browser. Anyone have these tablets and know what I can do to get them to stay fully charged when connected to power?
grand roost
have you tried another cable?
does it go all the way dead or does it hit a level and stay there?
you probably dont want them to be fully charged forever anyway
i have a lenevo tabllet mounted and i have a battery protection setting on so it stays between 40 and 60% maybe you have put something like this on without realising?
real sluice
I have tried different cables and different power plugs, same effect happens. I don't mind if they aren't 100% but they shouldn't be down to 3% when connected to power either. I have checked all the battery settings I could find, there's no option to choose what level to charge the battery to unfortunately. Unless I am absolutely blind.
real sluice
I disabled motion detection and the battery percentage is going up already
which kinda sucks, motion detection is the best way to get the display to turn on
high patio
Too late to suggest this, but for the next tablet maybe consider a smart plug. Have it power off at maybe 80% and then power back on when the tablet goes down to 20%.
I don't know if that really matters. But that's a precaution I've taken just in case with my FireHD 8. It has shown no sign of degradation so far. But I've only only owned it for 4 months.
grand roost
Too late to suggest this, but for the next tablet maybe consider a smart plug. H...
this was something i was planning on doing until i discovered the tablet i used had a setting to do this by itself