I recently bought a Wilfa Haze (which I suppose it's mostly commercialized in Sweden only), and it has an app integration with Wifi and probably Bluetooth connections. I was wondering if I could manage it with home assistant but there's no integration specific for Wilfa products. Is there any way I can find the information on how to connect this appliance to HA somehow? I tried to look for the firmware and protocols it uses but there's basically nothing.
#Trying to look for an integration for a humidifier
hushed spruce
cosmic birch
Try the Tuya integration. You may need to switch from the Wilfa branded app to the generic Tuya Smart or Smartlife app.
hushed spruce
Yes that seems to detect the device but there's no information or controls I can use, for some reason. Thank you for the answer however 🙂
zinc valley
I recently bought a Wilfa Haze (which I suppose it's mostly commercialized in Sw...
Are your thoughts to control the humidifier against a set value from you humidity sensor?
What i Have done is real simple! I Bought a Xiaomi Humidifier 2 Lite EU, I bought IKEAs smart plug to control when the Humidifier should start and stop, based on the value I got from the readings on my humidity sensor! When i got that working good I then needed to have a function that reminded me when water need to be refilled so I then set up a Timer that started when the humidifier is on and then pause the timer when its of this helps me every time the Humidifier has done a 10 hours up time cycle I get a reminder that I need to refill it with water!
Total cost in Swedish currency was 550kr