celest plume
Successfully got my Voice PE on WiFi, but when I started onboarding it to Home Assistant and it was running the wizard, possibly in the firmware update phase, the device restarted, and now it keeps boot looping whenever powered. I got it once to get discovered by Home Assistant again, but then as soon as I started adding it the device boot looped again.
celest plume
I reflashed the firmware and was able to restart the wizard, but after it thinks for a while it gets stuck on this and starts boot looping again.
Putting the device on the same VLAN as my Home Assistant instance appears to have resolved this issue.
left gulch
it will need access to the internet to check for updates
if using separate vlans then you will need to enable mdns relay or equivelant in your router settings
proven bough
Hm, so my Voice PE is on the same VLAN as my HA, although the HA is dual-homed on both Public & IOT VLANs, with my IOT VLAN not connected to internet. I got mine connect to HA, although when I click Setup Voice Assistant, it gets back into a boot loop again.
celest plume
it will need access to the internet to check for updates
The VLAN has unrestricted internet access, it's just a separate subnet.