#Z2M - Occasional weird/sluggish behavior

1 messages · Page 1 of 1 (latest)

pastel citrus
#

Heya,

I have some weird or sluggish behavior at times with Zigbee2MQTT which I can't really explain.

First issue: Our living room is at the other end of our rather long-ish built house, to get good coverage there I used a few Philips Hue, Ikea LED panels and some Ikea sockets along the way in about 4-5 Meters distance.
I still get very bad reception in the living room tho, the Hue remote often doesn't even work or seemingly responds 30 seconds later. Sometimes everything is totally fine, then a second later everything behaves sluggish again...

Second issue: I have one Ikea Fyrtur in my room which usually works fine, however on some days it just decides to respond to inputs ~30 seconds later. The Ikea LED panels basically directly beside it has no delay whatsoever, just the blind itself.

I'm not entirely sure if those 2 issues are related, the "main issue" is the living room tho.
Is there any way to test Z2M for latency or dropped packets to somehow debug this issue better? I'm not really sure what else to try.

Thanks!

pastel citrus
#

Changed some WiFi channels around now, seems to be sliiightly better... should have checked this before making a thread... mindblown

#

But the second question above still stands, this doesn't appear to be a signal strength issue. Has anyone else encountered slow response times on Ikea blinds?

young mist
pastel citrus
#

It's 11 as well for me, I've set WiFi to 6 and 11 now to not have any crossover