is it possible to play music on my assist device i have made a voice assistant using an Adafruit DAC, i2c microphone and an esp32. is it possible for it to play music also?
#Music Assitant on my diy Voice assitant
mild cape
if it is configured as a media player , then yes you will be able to add the player to MA
if the mic is an inmp441 be sure to connect the L/R pin to gnd or vcc otherwise it will be floating 😉
alpine solstice
if the mic is an inmp441 be sure to connect the L/R pin to gnd or vcc otherwise ...
thanks for that i forgot 😅
alpine solstice
if it is configured as a media player , then yes you will be able to add the pla...
i don't know how to do that and will it still work as the assist satellite
mild cape
are you going to be using ESPHome ?
alpine solstice
yes
alpine solstice
because if it works i will add more sensors and add on to this prototype and maybe even sell it
mild cape
what ESP board will you be using ? a standard esp32 or one of the variants , such as c3 or s3?
alpine solstice
which is recommend? i thought of using standard esp32
mild cape
esp32 S3 with PSRAM would be the best choice for this project and will give wiggle room for future development. a Standard ESP32 will work it is just not as powerful for media/voice etc and from experience the S3 is much better for only a small difference in cost