#Shelly 1 Mini Gen 3 Wiring Help

1 messages · Page 1 of 1 (latest)

tepid shard
#

I want to add a few can lights that won't be connected to a switch. I want the SHelly to be the only switch in the setup. I tried following a youtube video but it's not working. The youtube video had it connected to a physical switch, which I dont want to do, so I just left that part out and now it doesn't work. The Shelly powers up but when I "switch" it in the web interface, I can't get the lights to power on. Here is how I have it configured.

Does anyone see anything wrong here? Here is their docs for the device - https://kb.shelly.cloud/knowledge-base/shelly-1-mini-gen3 I must be doing something obviously wrong here and I just can't seem to see it.

image.png
Shelly 1 Mini Gen3

Device identification Device name: Shelly 1 Mini Gen3 Device model: S3SW-001X8EU Device SSID: Shelly1MiniG3-XXXXXX BLE model ID: 0x1015 Short descr...

forest perch
#

Seems fine to me

#

Does the shelly UI say that the output is on?

tepid shard
#

I’ve tried about every option in Shelly interface between button and switch.

IMG_0173.png IMG_0174.png IMG_0176.png IMG_0175.png
#

Probably need to climb back into the attic with a multi meter and see what I can figure out. Rule out some stuff maybe.

#

Well I’m a dumbass. I swear to god I hooked up the input the line but apparently I did not.

IMG_0183.jpg