#Aquara Temp & Humidity Sensors not updating | WSDCGQ11LM over z2m

1 messages · Page 1 of 1 (latest)

toxic trail
#

Hi Guys, i have a Sonoff Dongle and 3 WSDCGQ11LM Aquara sensors. They send data for a bit in different time patterns and stop.
1 of them mostly stops after even a few hours. I only have 6 Zigbee devices over z2m but the door sensors work fine all the time.
Do you guys have any idea? and is it normal that the sensors send so slow?

thorny sigil
#

Try a new battery, that's usually the solution when mine start doing that

#

The other thing to remember with these, at least in ZHA anyways, is they will show as paired, but they really aren't. Keep hitting the pair button every 5 seconds or so. I'll usually do this for 30-60 seconds after I see it "paired."

toxic trail
#

they work for a bit but all 3 sensor have a faulty battery?

thorny sigil
#

I took that you had one out of three dropping off. If they are all dropping offline, then I would suspect your mesh. Add routers, eliminate interference, use a USB extension, etc. There is a guide in the forums.