Learned IR blaster codes | Home Assistant | Page 1

viral brook Nov 9, 2024, 2:02 PM

#

not sure where to ask this... but i have a few IR blasters. if i run a learn command on one blaster can i use that code on another blaster?

solemn dagger Nov 9, 2024, 2:02 PM

#

If they are the same model (might not be important) I don't see why not.

viral brook Nov 9, 2024, 5:59 PM

#

Ok I wasn't sure because I seen different .codes files for each of the blasters so I didn't know if home assistant can look for the commands from each of the blasters files

river finch Nov 9, 2024, 10:44 PM

#

I think it depends what kind of blaster you have. If they are Broadlink, you're right, there is a different code file for each device and you have to teach each one separately. If they're Zigbee you can use the same code on any device, but (on mine at least) there is no common file of codes - you have to copy and paste them.

summer sonnet Nov 10, 2024, 1:26 AM

#

My RM3 the codes learned in one worked for the other on same model TV's. TV's were different units same model. RM3's 2 different units.

#Learned IR blaster codes