Frigate: OV is very slow | Home Assistant | Page 1

mossy moss Nov 3, 2024, 10:52 PM

#

I'm been using Frigate for quite a while now, and everything is working well. However, I see the message 'Ov is very slow' every time and it's getting worse every time.

Here are my system specs, it's not a powerful machine, but should be okay I'd imagine?

CPU: Intel Celeron J4105 CPU @ 1.5GHz (Quad Core)
GPU: Intel UHD 600/605 graphics

Frigate 0.14
vainfo: VA-API version: 1.17 (libva 2.10.0)
vainfo: Driver version: Intel i965 driver for Intel(R) Gemini Lake - 2.4.1

Config yaml: https://pastebin.com/7KM0dyDC

The OV interference seed has increased to '207.83 ms', as for the Detector CPU usage, it is showing 61%, however it has peaked to 96.4% many times during the day. The System CPU and GPU seem fine and don't go above 2%.

Would this be a hardware limitation, or a configuration issue?

Any help would be appreciated, thanks!

misty tinsel Nov 3, 2024, 11:39 PM

#

Does it improve or change anything if you set device: GPU instead of CPU?

mossy moss Nov 4, 2024, 12:48 PM

#

misty tinsel Does it improve or change anything if you set `device: GPU` instead of `CPU`?

Camera stream doesn't load, when I change it to GPU

📎 log.txt

coarse minnow Nov 4, 2024, 6:36 PM

#

openvino on GPU is not supported on this older CPU, recommendation would be to get a coral

mossy moss Nov 5, 2024, 2:19 PM

#

coarse minnow openvino on GPU is not supported on this older CPU, recommendation would be to g...

Yeh, I would of thought so too. Can the detection interference be improved using CPU, or simply put just buy the coral?

coarse minnow Nov 5, 2024, 2:20 PM

#

you are using the CPU

#

the only way to improve is to use additional hardware whether that is a coral, hailo, or GPU

#Frigate: OV is very slow