mini case | Home Assistant | Page 1

dense mortar Oct 21, 2024, 6:14 PM

#

I can do, but the design was created to have a specific lock for the second board. So I'll need to make it either adapted to the sensor board you'll use or make it empty with no internal hold

knotty onyx Oct 21, 2024, 6:15 PM

#

I have BME/BMP280 and BME680s that I typically use for my sensors

#

The 280s seem to come in 2 formats, one is smaller than the other.

#

#

This is the 680

#

#

But if you want to make it so it's blank, or has pin slots, so I can plug in external devices, that would work also. I think the slots for pins might be the easiest.

#

I just got a order of C3 and S3 super minis I'm playing with..

dense mortar Oct 21, 2024, 6:21 PM

#

ok I'll try to upload to makerworld in a couple of days, I have a fair number of printing projects enqueued at the moment

knotty onyx Oct 21, 2024, 6:21 PM

#

Since I don't think there is a 3v3 on the super mini, the larger 280 most likely won't be used.

#

Awesome, thanks a bunch!

dense mortar Oct 21, 2024, 6:35 PM

#

there's a 3.3v pin on the supermini

knotty onyx Oct 22, 2024, 3:07 AM

#

Oh, ok

#

I must have missed it w/ the super small silkscreen on my board. I just used my phone's camera and see it's other side of gnd from 5v..

spring panther Oct 23, 2024, 8:34 AM

#

what's the design?

dense mortar Oct 24, 2024, 3:29 PM

#

@knotty onyx : https://makerworld.com/models/727792

Compact enclosure for ESP32-C3 SuperMini by maruel

Super compact enclosure for an ESP32-C3 SuperMini. Large enough for various small sensors, yet compact enough so it fades in the background.Boost MeThanks for supporting my projects! 🙏

#

The one pictured before was a shorter model but it was really not fun to work with, so I added ~3mm more.

#

@spring panther what do you mean?

spring panther Oct 24, 2024, 3:34 PM

#

I was just wondering what you are talking about

#mini case