Zigbee2MQTT, Aqara switch toggles every single zigbee device on the network when pressed | Home Assistant | Page 1

lusty berry Oct 1, 2024, 1:40 PM

#

My setup: zigbee2mqtt is installed on a server separate from home assistant, I'm using a sonoff ZBDongle-P

This is what it looks like in the web interface.

The switch has been working fine for a while, but after having to do a battery change and a reset and pairing it again it started exhibiting this weird behavior:

Every time I press a button EVERY. SINGLE. DEVICE. that can be toggled will toggle itself, causing insane chaos within the house, it's even happening on a second switch of the same brand and model.

How do I even begin to debug this?

steel venture Oct 1, 2024, 4:32 PM

#

You should not have to re-pair when you change a battery. Should be able to change it.
Aside from that, actions happen based on automations. What is the entity_id and what automations is the entity_id able to trigger?

lusty berry Oct 8, 2024, 8:13 AM

#

steel venture You should not have to re-pair when you change a battery. Should be able to chan...

Weird, every time I had to change my batteries I HAD to pair again, they just wouldn't go back

as for automations, I made sure that the switch is not used in any automations and they are all disabled and it STILL triggers everything that can be triggered
This is what I see in HA for the device, I see an action was triggered and then mayhem ensued

#

I couldn't catch it in the logs, I'm kind of reluctant to do experiments because every time I press the button there's the risk I shut down my fridge or my computers, open the doors, trigger the alarm, etc

#Zigbee2MQTT, Aqara switch toggles every single zigbee device on the network when pressed