I picked up 2 additional Sonoff Zigbee 3.0 dongle Plus, flashed them with CC1352P2_CC2652P_launchpad_router_20221102, and attempted to add them to my zigbee network. I disconnected my original repeater, to make sure that there was no interferance. After multiple failed attempts to get the new 3.0 dongles to register, I gave up, and plugged my original repeater back in, and it no longer connects. This is causing issues w/ my existing devices now.
#ZHA repeaters no longer connected after attempting to add new repeaters.
heady compass
Gateway Sonoff Zigbee 3.0 dongle Plus is flashed with Firmware: Z-Stack 20210708, if that matters at all.
I don't remember what firmware is on the original router I have, but it's the older chipset, not the CC2652.
heady compass
This is what my old repeater is doing right now. https://cdn.discordapp.com/attachments/755502051714400287/1286843743445713000/20240920_171624.mp4?ex=66ef6220&is=66ee10a0&hm=edfab7d75a9011648c4c97ae02dbfee947d5e287480f3646d86a5dc08a24db76&
Welp, I think I just some how fixed everything, but have no freaking clue what I did...