stark fable
I'm trying to see if it will fit in my 25mm backboxes
The manual says 37mm deep but it's not clear if that is including the faceplate or not. If it includes the faceplate and idntje faceplate is at least 1.2cm then it will fit
Anyone have one and can measure for me? Long shot but figured it was worth asking
Incase I was unclear, here's a picture:
https://i.ibb.co/5186PTk/Screenshot-20240916-212148-2.png
I am wondering if the depth measurement in the manual is the red line or the blue line
As only the blue part goes into the back box (obviously)
runic silo
The measurement is the red line however it would be a very tight fit in a 25mm backbox
stark fable
The measurement is the red line however it would be a very tight fit in a 25mm b...
Thank you, if you have one, and if it's not too much trouble, are you able to measure the green line part for me?
runic silo
about 1.1cm
runic silo
but you need a bit of clearance to attach the backplate
stark fable
but you need a bit of clearance to attach the backplate
Meaning it goes slightly less deep as the clips go behind?
Or the opposite...
Might just take a punt on one tbh, if it doesn't work I can send it back
runic silo
as in if mounted flush to the wall the blue bit is around 2.4/2.5cm
but the cables secure horizontally (direction of the arrows) so it would be a very tight bend radius
stark fable
but the cables secure horizontally (direction of the arrows) so it would be a ve...
AH, thank you. Are the terminals recessed at all?
The image from the manual suggests they might be
https://i.ibb.co/dD2wptV/Screenshot-20240916-222103.png
runic silo
they are but not by much (will measure in a few)
stark fable
they are but not by much (will measure in a few)
You're a ⭐
Thanks for all your help
runic silo
5mm
