#suddenly otbr is failing...

1 messages · Page 1 of 1 (latest)

trim heron
#

[10:10:18] INFO: Checking /dev/ttyUSB0 identifying SkyConnect v1.0 from Nabu Casa.
[10:10:18] INFO: Starting universal-silabs-flasher with /dev/ttyUSB0
2024-08-09 10:10:20.017 homeassistant universal_silabs_flasher.flash INFO Extracted GBL metadata: NabuCasaMetadata(metadata_version=1, sdk_version='4.4.0', ezsp_version=None, ot_rcp_version='SL-OPENTHREAD/2.4.0.0_GitHub-7074a43e4' (2.4.0.0), cpc_version=None, fw_type=<FirmwareImageType.OT_RCP: 'ot-rcp'>, baudrate=460800)
2024-08-09 10:10:20.017 homeassistant universal_silabs_flasher.flasher INFO Probing ApplicationType.GECKO_BOOTLOADER at 115200 baud
2024-08-09 10:10:22.032 homeassistant universal_silabs_flasher.flasher INFO Probing ApplicationType.SPINEL at 460800 baud
2024-08-09 10:10:26.357 homeassistant universal_silabs_flasher.flasher INFO Probing ApplicationType.CPC at 460800 baud
2024-08-09 10:10:30.678 homeassistant universal_silabs_flasher.flasher INFO Probing ApplicationType.CPC at 115200 baud
2024-08-09 10:10:35.000 homeassistant universal_silabs_flasher.flasher INFO Probing ApplicationType.CPC at 230400 baud
2024-08-09 10:10:39.329 homeassistant universal_silabs_flasher.flasher INFO Probing ApplicationType.EZSP at 115200 baud
Error: Failed to probe running application type
s6-rc: warning: unable to start service universal-silabs-flasher: command exited 1
/run/s6/basedir/scripts/rc.init: warning: s6-rc failed to properly bring all the services up! Check your logs (in /run/uncaught-logs/current if you have in-container logging) for more information.

broken nymph
#

Reading the logs, The flasher is failing to probe the dongle

#

I doubt that it’s related to the HA version

#

Dongle could be in a weird state - try replugging

#

It could of come loose so try replugging

#

If you are running in a vm, usb passthrough can be janky. Don’t have a fix for that.

#

You could try turning the flasher off in the addon settings in case it’s just the flasher that’s struggling

#

However you probably shouldn’t leave it off

trim heron
#

yeah it's a vm, i checked the usb passthrough and it seems okay but will reverify again. will try replugging the dongle too