Flashing ZigStar USB stick | Home Assistant | Page 1

icy quartz Jun 30, 2023, 7:37 PM

#

Let's move this into a thread

mossy trail Jun 30, 2023, 7:37 PM

#

ok thank you

#

plug it into my debian

#

moment

icy quartz Jun 30, 2023, 7:38 PM

#

https://www.zigbee2mqtt.io/guide/adapters/flashing/flashing_via_cc2538-bsl.html#method-without-docker

mossy trail Jun 30, 2023, 7:41 PM

#

oh wow there's a docker image to flash nice , all i need to do is check if its in /dev/ttyUSB0:

icy quartz Jun 30, 2023, 7:42 PM

#

I linked to the documentation that avoids using the Docker image

#

All you need is Python 3 and two Python packages

mossy trail Jun 30, 2023, 7:44 PM

#

ah ok better use the stand-alone scripts

#

ok i\ll try

#

 pip3 install pyserial intelhex
error: externally-managed-environment

× This environment is externally managed
╰─> To install Python packages system-wide, try apt install
    python3-xyz, where xyz is the package you are trying to
    install.

#

what gives

#

putty not allowed ... ?

#

SHH ...

mossy trail Jun 30, 2023, 8:05 PM

#

got it working on my ubuntu system

#

debian sucks

#

only have one /dev/ttyUSB0

#

even when its not plugged in ?

#

damni

#

doesn't seem to see it anymore

#

on usb

#

got it agian

#

but

#


Opening port /dev/ttyUSB1, baud 500000
Reading data from ./CC1352P2_CC2652P_launchpad_coordinator_20230507.hex
Your firmware looks like an Intel Hex file
Connecting to target...
ERROR: Timeout waiting for ACK/NACK after 'Synch (0x55 0x55)'

#

getting it into bootloader , just press FLASH button right

icy quartz Jun 30, 2023, 8:27 PM

#

Hold it down while it's unplugged, plug it in, then release the button

#

Or do what Tube suggested, if you flashed the wrong firmware

#Flashing ZigStar USB stick