lethal root May 13, 2020, 7:26 AM

#

443->8123 is also good

#

And how do you know the problem is with duckdns? 20 minutes on an RPi4 seems normal to me if you have some stuff running

weary stratus May 13, 2020, 7:29 AM

#

it happened after i installed duckdns

lethal root May 13, 2020, 7:36 AM

#

But SSL works?

forest brook May 13, 2020, 7:44 AM

#

@lethal root Ok, I'll move the answer to #integrations-archived @reef ingot , thankyou

weary stratus May 13, 2020, 7:47 AM

#

mraedis, it takes 15 minutes now. i have almost nothing running

#

have disabled everything

#

but that is normal then?

weary stratus May 13, 2020, 8:12 AM

#

how can i see if SSL works?

#

yes, it's true

lethal root May 13, 2020, 9:04 AM

#

if you can connect to https://yoururl.duckdns.com then it's SSL

weary stratus May 13, 2020, 10:21 AM

#

i can connect to that address but with .org

strange cove May 13, 2020, 11:22 AM

#

Hey all. I'm using the fantastic VScode Addon from @raven tinsel I really love it but I have one problem. I backup my whole configuration to my private gitea Server. I have done this via ssh direkt from the server. Now I want to do this within the VSCode Addon. Sadly when I try to push my changes I get the following error: Git: fatal: unable to access 'https://path/to/my/projekt/': Failed to connect to my.server.tld port 443: Connection timed out. Can someone give me a hint for finding the problem?

#

Maybe this is a problem with the container of the addon and the network settings of it?

raven tinsel May 13, 2020, 11:24 AM

#

@strange cove You need to do it SSH keys instead of HTTP checkouts

#

due to the nature of code-server, it won't work with http repos

strange cove May 13, 2020, 11:35 AM

#

ah okay so i have to configure this in my gitea installation. I will give it a try. Thank you @raven tinsel for all the good work you are doing for the community!

weary stratus May 13, 2020, 1:07 PM

#

hey there. I have looked everywhere and can't find it out. How can I give users (that are not admin) the ability to access an addon like grocy or so from the hassio Dashboard.

dreamy mural May 13, 2020, 1:22 PM

#

Here's a sneak peek of the new filter manager in the log-viewer add-on.

📎 2020-05-13_08.19.14.gif

strange cove May 13, 2020, 2:01 PM

#

@dreamy mural looks fantastic!

dreamy mural May 13, 2020, 2:02 PM

#

Thank you.

#

It will basically allow you to apply any CSS properties to lines that contain specific text (or match a specific pattern).

merry lynx May 13, 2020, 4:52 PM

#

Let's Encrypt - Where/how do i enter the config information for this to work? I had it working till the certificates recently expired.

sly kindle May 13, 2020, 4:55 PM

#

@merry lynx all that has moved to the top center of the page

#

📎 unknown.png

merry lynx May 13, 2020, 4:57 PM

#

Ah Thanks!

lethal root May 13, 2020, 5:06 PM

#

@merry lynx did you restart your HA during this time? new certs don't load unless you restart

merry lynx May 13, 2020, 5:07 PM

#

It is working now. Thanks for the quick response

weary stratus May 13, 2020, 9:04 PM

#

Hello
I'm looking to set up https
For the moment I'm redirecting my local address to my personal dns.
I installed the addon let s encrypt
But I can't get it to work.
can you help me.
Thank you

quiet moon May 13, 2020, 9:13 PM

#

need help with getting motion eye "detection" settings to work on an outside camera. What are some of the settings everyone uses to eliminate false detection?

neon pulsar May 13, 2020, 9:15 PM

#

Hey, has anybody else the problem that the adGuard addon is really slow leading to the router (fritzbox in my case) selecting the second dns server instead of the preferred adGuard DNS running in my hass.io
I already added multiple dns servers and activated simultaneous requests. I also never had this problem when i used the pihole addon
Thanks already

marble ledge May 13, 2020, 9:20 PM

#

Hey im trying to install zigbee2mqttassistant but it isn’t appearing in the list. I’m using hassi 0.109.6

lethal root May 14, 2020, 5:21 AM

#

It's not a default addon so you need to add the repository first @marble ledge

#

Toni, never had that problem.

#

@weary stratus What external URL are you using? Lets Encrypt does not give certificates for local domains

weary stratus May 14, 2020, 5:54 AM

#

@lethal root i use my external url

lethal root May 14, 2020, 5:56 AM

#

Show me your configuration without the passwords and replace the url with something like xyz.com

weary stratus May 14, 2020, 6:04 AM

#

@lethal root email: postmaster@xxxxxx.fr
domains:

maison.xxxxxxx.fr
certfile: fullchain.pem
keyfile: privkey.pem
challenge: dns
dns:
dnsprovider: dnsxxxx.ovh.net
ovh_application_secret: FdcytgMrKnq48Q376xxxxxxxxxxxxxxxxxxxxxxxxx
ovh_application_key: 7lDeZqxxxxxxxxxxxxxxxxxx

But I'm not sure which of these two keys I got.
And i dont know what is my ovh_consumer_key: '' ans where found ovh_endpoint: ''

lethal root May 14, 2020, 6:08 AM

#

https://docs.ovh.com/gb/en/customer/first-steps-with-ovh-api/

#

I don't know what the french word for consumer key is though

#

@weary stratus did you read that?

#

basically you curl with the application key

#

And the response is a consumer key

#

the endpoint, as far as I can tell, is the location you want to connect to

weary stratus May 14, 2020, 6:35 AM

#

consumer key = password to my ovh account ?

#

endpoint = my domaine ?

lethal root May 14, 2020, 6:51 AM

#

No endpoint is one of their servers I think

#

And consumer key is something you get with curl

weary stratus May 14, 2020, 7:11 AM

#

Thanks. I'll try.

weary stratus May 14, 2020, 7:30 AM

#

@lethal root could you help me for Requesting an authentication token from OVH on https://docs.ovh.com/gb/en/customer/first-steps-with-ovh-api/

#

when I go on https://eu.api.ovh.com/1.0/auth/credential, I don't understand what I'm supposed to do

patent copper May 14, 2020, 8:01 AM

#

Good morning! About the Ngnix Proxy Manager add-on... Now that its stores it data in the MariaDB, how do I purge data/config if I want to reinstall the Ngnix add-on?

lethal root May 14, 2020, 8:43 AM

#

Remove addon, install phpmyadmin, wipe nginx proxy db?

#

@weary stratus look up curl first

#

in my opinion, OVH is making it not exactly easy to do dynamic dns updates 😛

#

What browser are you using @weary stratus

glass plume May 14, 2020, 8:54 AM

#

trying to install hacs to my home assistance, hacs folder is in the custom_components, restarted home assistance, cleared cache, but its not showing up in the integrations page and dont see anything in logs at all about it, is there something im missing?

lethal root May 14, 2020, 8:55 AM

#

Did you do step 4?

Step 4 - Create custom_components folder

Open the folder where you have your configuration.yaml file.

If you do not see a custom_components folder in the same folder as configuration.yaml, you need to create it.

#

Also the next few steps say to use the github token to add the integration manually

#

It won't magically show up

glass plume May 14, 2020, 8:58 AM

#

i got the github token but the configuration for it in integrations isn't even showing up after i search for it

#

and yes i have custom_components folder, i even used the bash script to install too after my attempt failed

lethal root May 14, 2020, 8:58 AM

#

So when you click the + on the integrations page, you can'

#

can't select HACS ?

glass plume May 14, 2020, 8:59 AM

#

nope, not on the list at all

lethal root May 14, 2020, 9:00 AM

#

Well I don't use HACS so I'm not too much of help there

glass plume May 14, 2020, 9:01 AM

#

i'm very very new to home assistant but far from my first open source thing i've used, not sure where i went wrong here, did do the update recently and got the new UI page for integrations.

blissful acorn May 14, 2020, 11:22 AM

#

I have a question about the Ubiqiti addon.. My AP is not able to be adopted to the controller. It keeps saying ''Adopting''

#

Now it seems that port 8080 is needed to communicate. When I visit http://192.168.178.36:8080/ it is re-directed to https://192.168.178.36:8443 (controller page)

#

Were can I check were that re-direction is installed?

#

I spoke with the helpdesk from Ubiqiti and they said that that was the problem why the AP is not able to adopt

lethal root May 14, 2020, 12:00 PM

#

@blissful acorn configuration page of your ubiquiti addon

#

Supervisor -> Unifi -> COnfiguration (top middle) -> Network

#

You should see this: https://prnt.sc/sgnl4y

blissful acorn May 14, 2020, 12:06 PM

#

THx

#

WIll check

#

But this is default right ?

#

8080 is only for communicatiopn

#

why is there a re-direct to 8443

lethal root May 14, 2020, 12:18 PM

#

my screenshot is default

#

Are you sure it's not redirecting to 8843? Which is the https link

blissful acorn May 14, 2020, 2:29 PM

#

Yes its redirecting

#

But i spoke to someone from Ubiqti and he said that is not normale.. Because port 8080 is in ''use'' now (redirecting)? the AP cannot be included

lethal root May 14, 2020, 2:31 PM

#

Could you screenshot your network config for me?

blissful acorn May 14, 2020, 2:33 PM

#

Well i sort off fixed te problem.. Installed the controller on my ubuntu VM and that was working fine instantly

lethal root May 14, 2020, 2:33 PM

#

Can't do presence detection with that though

blissful acorn May 14, 2020, 2:34 PM

#

Not using it

#

😛

lethal root May 14, 2020, 2:34 PM

#

But you might D:

blissful acorn May 14, 2020, 2:34 PM

#

is it reliable ?

lethal root May 14, 2020, 2:35 PM

#

It uses connected devices to your ubiquiti AP, so as long as people connect to the wifi, sure

#

This is home/not home, not room-scale detection

blissful acorn May 14, 2020, 2:35 PM

#

yes

hollow cairn May 14, 2020, 4:11 PM

#

Super simple question I think, just getting started with HASS, I believe I installed a repository the wrong way for HACS but now can't seem to remove it. Clicking the little trash can next to it does nothing. I have the ssh/terminal addon installed but can't sort out where to go to manually remove it

sly kindle May 14, 2020, 4:12 PM

#

@hollow cairn there's a bug and it's made it kind of like a game

#

try clicking on the very edge of the circle that appears around the trash icon

hollow cairn May 14, 2020, 4:12 PM

#

Hahahaha oh man

#

that is fantastic

#

worked immediately

sly kindle May 14, 2020, 4:13 PM

#

🥳

#

you win!

hollow cairn May 14, 2020, 4:14 PM

#

great, now I'm back to trying to get jason0x43/hacs-hubitat to work

#

when I add the fully qualified github url it adds but doesn't work, when I try just jason0x43/hacs-hubitat, it never adds

#

is there a special place to click 😉

sly kindle May 14, 2020, 4:16 PM

#

are you sure this is an addon?

#

ah, that's an integration

#

a custom integration

#

So, integrations are these https://www.home-assistant.io/integrations

#

Those are all the official integrations

hollow cairn May 14, 2020, 4:17 PM

#

it mentions adding this in "HACS" which is what I thought I was doing

sly kindle May 14, 2020, 4:18 PM

#

HACS is a store for all the custom, unsupported integrations

hollow cairn May 14, 2020, 4:18 PM

#

https://github.com/jason0x43/hacs-hubitat#installation

obsidian wind May 14, 2020, 4:18 PM

#

cogneato where can i ask for help with HASC?

sly kindle May 14, 2020, 4:19 PM

#

sent you a link to the HACS discord

#

📎 unknown.png

#

that's the HACS store

hollow cairn May 14, 2020, 4:19 PM

#

I just can't find "marketplace -> settings" in any menu

#

supervisor -> addon store is what I thought I'd determined it to be

sly kindle May 14, 2020, 4:20 PM

#

HACS is itself, a custom integration

#

you have to add it. it doesn't come with HA

hollow cairn May 14, 2020, 4:20 PM

#

AH

sly kindle May 14, 2020, 4:21 PM

#

it's a custom integration, which organizes the majority of custom integrations out there into one place

#

https://hacs.xyz/docs/installation/manual

#

I tried the command-line method recently and it worked well

hollow cairn May 14, 2020, 4:22 PM

#

thanks, that's what I'm following now

dark yoke May 14, 2020, 4:22 PM

#

man.... that UI looks ugly

sly kindle May 14, 2020, 4:23 PM

#

yeah...whoever is responsible for that...we should find them and poke them with sharp sticks

#

That, and the big advertisement for HACS on every page if you scroll too far

dark yoke May 14, 2020, 4:25 PM

#

You have a good amount of installed stuff there, where many have updates, can you send me your /config/.storage/hacs.repositories file?

sly kindle May 14, 2020, 4:25 PM

#

sure

dark yoke May 14, 2020, 4:25 PM

#

That is only in the beta due to the icon changes

sly kindle May 14, 2020, 4:26 PM

#

I swear I updated all of those last night

#

maybe it was a dream

hollow cairn May 14, 2020, 4:46 PM

#

command line doesn't seem to work on hassio (the image install on a rpi4

dark yoke May 14, 2020, 4:47 PM

#

correct

#

~~give me 4 min, I can fix that~~

sly kindle May 14, 2020, 4:48 PM

#

it did work?

dark yoke May 14, 2020, 4:50 PM

#

nah, it does not have all the tools, use ssh addon

sly kindle May 14, 2020, 4:50 PM

#

oh yeah...that's what I used

#

@hollow cairn enable advanced mode for your user, and install the terminal and ssh addon

#

then you'll have a terminal where you can run the command

hollow cairn May 14, 2020, 4:53 PM

#

I did

#

maybe it just wont work in the web terminal

#

let me try through SSH

#

yeah same result

#

curl -sfSL https://hacs.xyz/install | bash -
Trying to find the correct directory
Could not find the directory for Home Assistant.
Manually change the directory to the root of your Home Assistant configuration
With the user that is running Home Assistant
and run the script again

dark yoke May 14, 2020, 5:01 PM

#

You probably do not have a log file for homeassistant yet

hollow cairn May 14, 2020, 5:01 PM

#

seems like hassio runs as root

#

how do I get it to kick one out

dark yoke May 14, 2020, 5:02 PM

#

if you are in the ssh addon, touch /config/home-assistant.log

hollow cairn May 14, 2020, 5:03 PM

#

yup, that was it, thx

#

interesting that it's looking for that log file vs something that gets created like configuration.yaml or home-assistant_v2.db

dark yoke May 14, 2020, 5:04 PM

#

configuration.yaml is not HA spesific, home-assistant_v2.db does not exsist if you use an external DB

hollow cairn May 14, 2020, 5:05 PM

#

ah

dark yoke May 14, 2020, 5:05 PM

#

usually there is a logfile (unless something changed recently)

#

buuuut, that is part of HA core, and HACS is not an addon, so if you need any more please use #integrations-archived 😄

granite adder May 14, 2020, 7:48 PM

#

Was Pi-Hole Deprecated because the entire service is broken, or just the Home Assistant Add-On?

sly kindle May 14, 2020, 7:56 PM

#

@granite adder not pi hole itself https://github.com/hassio-addons/addon-pi-hole#deprecation-warning

#

https://twitter.com/Frenck/status/1233902986520387584 more reasons here

inland grove May 14, 2020, 9:01 PM

#

is there a way to assign a light switch to an area?

thorn pendant May 14, 2020, 9:19 PM

#

Hey so I want to access storage location for one of the addons

#

is there a way I can access it?

sly kindle May 14, 2020, 9:24 PM

#

@inland grove configuration > devices. Find the device, and select it, then use the gear in the upper right

inland grove May 14, 2020, 9:24 PM

#

I don't see a device for a light switch, like https://www.home-assistant.io/integrations/light.switch/

#

some of my lights have devices where they're dimmers and the zwave component creates a light entity, but for non-dimming lights they make switch entities, and I need to use light.switch above to make lights

sly kindle May 14, 2020, 9:25 PM

#

that would appear as a switch which you assign an area?

inland grove May 14, 2020, 9:26 PM

#

it would appear as a light within the area, like a dimmable light does

sly kindle May 14, 2020, 9:26 PM

#

I mean in your devices list

#

does the original switch show up?

inland grove May 14, 2020, 9:26 PM

#

yes

#

and the switch entity has an area

#

but the light that wraps it doesn't

sly kindle May 14, 2020, 9:26 PM

#

but this new fake version of it doesn't...i see

inland grove May 14, 2020, 9:27 PM

#

I thought it might inherit it, but apparently not

sly kindle May 14, 2020, 9:27 PM

#

would be nice. I haven't had to make use of that integration mysaelf

inland grove May 14, 2020, 9:27 PM

#

searching for "area" in the documentation is useless, unfortunately

weary stratus May 14, 2020, 9:28 PM

#

@lethal root i try firefox and edge

inland grove May 14, 2020, 9:28 PM

#

(it picks up a bunch of "are a" instances and doesn't show anything else)

unborn sandal May 14, 2020, 11:42 PM

#

hey.. I have a question regarding the MQTT add-on.. when I install it, it looks like everything is fine but I can't sent messages to it because the broker is only listening to the internal network and not the public network. Somehow the service is not published outside the docker network.

#

Is there something I'm overlooking?

#

the samba add-on doesn't have this issue btw, I can perfectly connect to that one

obtuse widget May 14, 2020, 11:58 PM

#

Hi, i run HA version 0.109.6, upgraded yesterday. I just noticed that the "SSH-server" add-on has been removed from the add-on store. Why? I used it before on older versions of HA, but hadn't used it for a while because of the migration of HA from rpi to a dedicated Linux-server for performance-reasons. I wanted to reinstall it, but it's gone now.

raven tinsel May 14, 2020, 11:59 PM

#

@obtuse widget It is considered an advanced add-on

#

enable advanced mode on your user profile

obtuse widget May 15, 2020, 12:00 AM

#

Advanced mode is already enabled. I do that always right after installation.

raven tinsel May 15, 2020, 12:00 AM

#

well that is the only thing that shows/hides it

obtuse widget May 15, 2020, 12:01 AM

#

strange...

#

is there another way to get it back?

raven tinsel May 15, 2020, 12:01 AM

#

Yes, enable advanced mode

#

sorry but that is it :S

obtuse widget May 15, 2020, 12:01 AM

#

😂

unborn sandal May 15, 2020, 12:02 AM

#

hey @raven tinsel got any tips for me maybe?

raven tinsel May 15, 2020, 12:02 AM

#

Nope

#

I don't use MQTT

unborn sandal May 15, 2020, 12:02 AM

#

I'm grasping straws here.. been battling this for 4 hours

obtuse widget May 15, 2020, 12:02 AM

#

Hey Frenck, when are you streaming again?

raven tinsel May 15, 2020, 12:03 AM

#

will install @unborn sandal hold on

unborn sandal May 15, 2020, 12:03 AM

#

isn't there a way to tell docker to bind the service to the bridge interface?

obtuse widget May 15, 2020, 12:03 AM

#

didn;t see you in a while on youtube

raven tinsel May 15, 2020, 12:03 AM

#

@obtuse widget When it all returns a bit to normal again here @ home

obtuse widget May 15, 2020, 12:03 AM

#

ah ok

#

thanks. See you then 🙂

raven tinsel May 15, 2020, 12:03 AM

#

My wife has to work during these times, schools are closed so 2 kids at home

#

so my work shifts mostly to the evening

obtuse widget May 15, 2020, 12:04 AM

#

yep i know. i also live in Holland 🙂

raven tinsel May 15, 2020, 12:04 AM

#

or try to do stuff during the day, but that is just harder

obtuse widget May 15, 2020, 12:04 AM

#

my wife also, she takes care of the elderly

unborn sandal May 15, 2020, 12:04 AM

#

continuous interrupts keep you from getting stuff done

obtuse widget May 15, 2020, 12:04 AM

#

tell me about it 😦

raven tinsel May 15, 2020, 12:05 AM

#

@unborn sandal Yeah but I'm fine with that

#

😛

#

hehe

#

Installed Mosquitto

unborn sandal May 15, 2020, 12:05 AM

#

ghehe..

#

oh great

raven tinsel May 15, 2020, 12:05 AM

#

install MQTT Explorer

#

hit connect

#

done

#

I'm not even kidding

unborn sandal May 15, 2020, 12:06 AM

#

from outside the box?

raven tinsel May 15, 2020, 12:06 AM

#

yes

unborn sandal May 15, 2020, 12:06 AM

#

mind is blown

raven tinsel May 15, 2020, 12:06 AM

#

MQTT Explorer is on my desktop, different VLAN

unborn sandal May 15, 2020, 12:06 AM

#

what am I doing wrong..

raven tinsel May 15, 2020, 12:06 AM

#

📎 unknown.png

unborn sandal May 15, 2020, 12:06 AM

#

are you using a raspberry

obtuse widget May 15, 2020, 12:06 AM

#

firewall in the way?

raven tinsel May 15, 2020, 12:07 AM

#

Add-on config

#

📎 unknown.png

#

just the default

unborn sandal May 15, 2020, 12:07 AM

#

yeah I'm in the same configs

raven tinsel May 15, 2020, 12:07 AM

#

Need to add port descriptions... adding note to my list 🙂

unborn sandal May 15, 2020, 12:07 AM

#

I converted the vmdk into a VM on ESXi ..there is no fw

#

it's the bare thing

#

Starting Nmap 7.80 ( https://nmap.org ) at 2020-05-15 01:33 CEST
Nmap scan report for 10.252.10.4
Host is up (0.018s latency).
Not shown: 998 closed ports
PORT    STATE SERVICE
139/tcp open  netbios-ssn
445/tcp open  microsoft-ds

#

this is the external ports list

obtuse widget May 15, 2020, 12:08 AM

#

hm.. none of them..

#

something is in the way, that's for sure

#

can you try from the inside?

#

127.0.0.1:8884

unborn sandal May 15, 2020, 12:09 AM

#

yeah .. the DOCKER chain in iptables is my guess

obtuse widget May 15, 2020, 12:09 AM

#

could be

unborn sandal May 15, 2020, 12:09 AM

#

but I'm baffled why

#

I use default installs..

obtuse widget May 15, 2020, 12:10 AM

#

guess docker needs the ports opened also

unborn sandal May 15, 2020, 12:10 AM

#

it's a fresh machine also

#

I'm not familiar with docker and opening ports

obtuse widget May 15, 2020, 12:10 AM

#

google.. 🙂

#

worth a shot

unborn sandal May 15, 2020, 12:11 AM

#

yeah

#

maybe tomorrow.. I'm too tired now..

#

😦

obtuse widget May 15, 2020, 12:11 AM

#

ok good luck i'll try to get sshserver back here 🙂

obtuse ginkgo May 15, 2020, 12:12 AM

#

anyone have the buttons vanish on their custom roku card after updating it?

unborn sandal May 15, 2020, 12:12 AM

#

there is a terminal & ssh add-on right

#

anyway good luck @obtuse widget

obtuse widget May 15, 2020, 12:12 AM

#

yeah but the ssh add-on had disappeared from the store here dunno why

#

Frenck told it's advancee mode. But i always enable that

#

i'll try disabling then reenabling now.

#

maybe it helps.

#

thanks you too

obtuse ginkgo May 15, 2020, 12:14 AM

#

the buttons are still there but I can't see them.

unborn sandal May 15, 2020, 12:14 AM

#

try google 😉 nn

obtuse ginkgo May 15, 2020, 12:16 AM

#

?

sly kindle May 15, 2020, 12:26 AM

#

@obtuse widget if ssh addon doesn't show when in advanced mode then you may be on an old version?

obtuse widget May 15, 2020, 1:29 AM

#

i just was able to get things right here. I followed the advice of @unborn sandal and used the "Terminal and SSH"-add-on. I just got it up and running and can log in with SSH again. Works great! Thank you all for your help. Appreciated! 🙂

little imp May 15, 2020, 2:58 AM

#

My duckdns addon was stopped when internet was down, then when internet comes back, it doesn't restart. How can I fix it?

sly kindle May 15, 2020, 3:52 AM

#

why was it stopped?

dark yoke May 15, 2020, 7:04 AM

#

i think i crashes if there is a network error

somber haven May 15, 2020, 7:10 AM

#

Hi all, anyone having issues with ESP Home and nodes that appear as offline (even if they are not and data is pulled ok)? I am on HA 0.109.6 in Docker. Any help would be greatly appreciated.

little imp May 15, 2020, 8:03 AM

#

@dark yoke It didn't crash. After the internet comes back, I manually restart duckdns through LAN address accessing. The problem is how to set duckdns auto restart when the network backs to normal.

finite raven May 15, 2020, 11:15 AM

#

Restarting HomeAssistant Server will restart Add-ons too?

dark yoke May 15, 2020, 11:25 AM

#

No

craggy atlas May 15, 2020, 2:09 PM

#

MyQ, Anyone have any experience with this? It seems that I can't sign in. each time i attempt to it give me an Unexpected error

karmic hollow May 15, 2020, 2:40 PM

#

hey i just installed custom header from HACS and i accedentally put it in kiosk mode, i dont know how to get out of it

peak onyx May 15, 2020, 3:41 PM

#

Hello everyone. I am attempting to setup the TensorFlow add-on on my NUC>Docker>Hassio installation but keep getting: Unable to locate tensorflow models or label map. Any ideas?

spice canopy May 15, 2020, 5:40 PM

#

MyQ, Anyone have any experience with this? It seems that I can't sign in. each time i attempt to it give me an Unexpected error
@craggy atlas I'm new to this. What what is your installation? I'm running on Linux Mint VM, and installed Supervised HA on it just a couple days ago. It found the MyQ integration and I simply entered my credentials for it to work

#

Because I'm testing, I don't have any sophisticated setup on the network (certificates etc) - just straight port 8123

#

I'm having difficulty accessing my HA server using the domain address on my network internally. From what I gather, its related to my router not having Nat Loopback/Hairpin capability. Some have noted the solution is to use DNSMasq. I've installed the Addon, but I am unable to get it running using the default settings. The issue is related to the Network section where the TCP/UDP is set to 53. If I delete the values....to NULL. Then the service runs, however I have no clue whether it is working properly, as there is nothing meaningful in the logs.

peak onyx May 15, 2020, 6:15 PM

#

@jade wing hello again! Do I need to setup Doods in Docker in addition to running the add-on?

jade wing May 15, 2020, 6:15 PM

#

Rather than tagging folks and demanding help, why don't you just post the question?

peak onyx May 15, 2020, 6:16 PM

#

I didn't mean to demand. I searched the term doods and saw that you have a lot of experience with it. My bad

dense spadeBOT May 15, 2020, 6:16 PM

#

Discord isn't like IRC, you don't have to tag people on every response. Keep in mind that every time you tag somebody, they get a notification ping. That can very quickly become annoying and people may block you.

jade wing May 15, 2020, 6:17 PM

#

Every time you tag somebody, they get a notification ping

#

This is, to put it gently, rather annoying when you're getting dozens and dozens a day

#

So, don't 😉

peak onyx May 15, 2020, 6:17 PM

#

understood

jade wing May 15, 2020, 6:17 PM

#

Also, I don't use add-ons or #330944238910963714

#

so, I'd guess not, but you'll have to see what the add-on does

sly kindle May 15, 2020, 6:19 PM

#

@peak onyx what addon are you using?

peak onyx May 15, 2020, 6:21 PM

#

DOODS-amd64 by Snowzach

charred veldt May 15, 2020, 7:16 PM

#

So, If I'm not running this "supervised" thing, how can I use HA as an MQTT-broker? Or is that impossible?

lethal root May 15, 2020, 7:16 PM

#

you install the mqtt addon

#

thats about all the steps

charred veldt May 15, 2020, 7:16 PM

#

I don't have access to the "addon" button any longer

lethal root May 15, 2020, 7:16 PM

#

then it's not supervised?

charred veldt May 15, 2020, 7:16 PM

#

uuh

sly kindle May 15, 2020, 7:17 PM

#

If you're not running supervised then there are no addons

charred veldt May 15, 2020, 7:17 PM

#

in portainer it says im running "home-assistant:stable"

sly kindle May 15, 2020, 7:17 PM

#

Are you running straight docker?

charred veldt May 15, 2020, 7:18 PM

#

Ye, I think so at least

sly kindle May 15, 2020, 7:18 PM

#

does portainer show a supervisor container?

charred veldt May 15, 2020, 7:18 PM

#

Not a single one.

sly kindle May 15, 2020, 7:18 PM

#

then you're running plain old homeassistant

#

homeassistant core

#

you can find mqtt broker docker images out at docker hub and configure it for yourself

#

or maybe even portainer's "store" shows one

charred veldt May 15, 2020, 7:19 PM

#

Hmm

sly kindle May 15, 2020, 7:19 PM

#

you've chosen portainer's store over the supervisor store basically

#

and all the "freedom" that comes with that

charred veldt May 15, 2020, 7:20 PM

#

So, If I want this supercharged version of home assistant, I want what is called supervisor?

sly kindle May 15, 2020, 7:20 PM

#

and yeah, scare quotes

charred veldt May 15, 2020, 7:20 PM

#

Don't laugh at me. I think this is confusing.

#

😄

sly kindle May 15, 2020, 7:20 PM

#

users would argue over which is the supercharged version

charred veldt May 15, 2020, 7:21 PM

#

A month ago I installed hassio on an old laptop. Today i did what I though I installed the same stuff on a better computer, but now I cant install add-ons. Thats the short version.

#

I just want home-assistant with add-ons

sly kindle May 15, 2020, 7:22 PM

#

What os is the better computer running

charred veldt May 15, 2020, 7:23 PM

#

Right now ubuntu 20, non server version.

#

But it doesn't matter for me, I just thought it would work. I'll install whatever is needed for HA to work properly.

sly kindle May 15, 2020, 7:25 PM

#

The docs for a generic install have been removed. You can still do it, but Debian would be a safer choice vs Ubuntu

spice canopy May 15, 2020, 7:51 PM

#

you can follow this for supervised

#

https://vio.net.au/install-hassio-on-docker-on-ubuntu-on-vmware/

#

when you get to the Hassio:Installation : curl command

#

it doesn't work...you have to download the file locally and execute though

#

then in the directory you downloaded the file to....

#

run

#

chmod u+x ./installer.sh

#

and then install with :

#

./installer.sh -d /home/<user>/docker/hassio

#

https://github.com/home-assistant/supervised-installer

amber quest May 15, 2020, 8:16 PM

#

hi, where can i find the configuration file for motioneye ? on rpi 4

#

motioneye does not send photo, I need to set it up

sly kindle May 15, 2020, 8:19 PM

#

do you mean the configuration for the addon?

amber quest May 15, 2020, 8:19 PM

#

yes

sly kindle May 15, 2020, 8:21 PM

#

it's all moved to the center top of the page

#

different tabs now

amber quest May 15, 2020, 8:21 PM

#

yes I know, but it's not there

sly kindle May 15, 2020, 8:21 PM

#

info/configuration/logs

#

is it installed?

amber quest May 15, 2020, 8:22 PM

#

yes

#

there is only this " motion_webcontrol: true
ssl: true
certfile: fullchain.pem
keyfile: privkey.pem
action_buttons: []
"

sly kindle May 15, 2020, 8:22 PM

#

images go to /share directory last time I messed with it

#

you want to be careful with that btw

#

can easily fill up an SD card

amber quest May 15, 2020, 8:24 PM

#

it will be saved to an external drive

#

where can I set the photo to be sent ?

sly kindle May 15, 2020, 8:28 PM

#

are you running on a pi with HA OS?

amber quest May 15, 2020, 8:28 PM

#

yeah

sly kindle May 15, 2020, 8:28 PM

#

you can't simply connect and pass through external drives through docker

amber quest May 15, 2020, 8:30 PM

#

so I'll send it to NAS

#

where can I set the photo to be sent ?

sly kindle May 15, 2020, 8:31 PM

#

I don't use it'

#

Here let me install it and learn it for you

amber quest May 15, 2020, 8:33 PM

#

https://ibb.co/ryyDWPF

#

image

sly kindle May 15, 2020, 8:40 PM

#

📎 unknown.png

#

the other option is a network share

#

📎 unknown.png

amber quest May 15, 2020, 8:41 PM

#

I was saying

#

but it won't solve my problem - photo in email

inland grove May 15, 2020, 8:52 PM

#

you could use a node-red setup for it, probably: https://flows.nodered.org/node/node-red-contrib-email-out

craggy atlas May 16, 2020, 2:53 AM

#

@spice canopy I am running Supervised on the default OS. I used

     - platform: myq
       username:
       password:

It shows up in my integration and that is where the issue is for the unexpected error

spice canopy May 16, 2020, 3:57 AM

#

@craggy atlas are you able to remove it from your integrations and configurations - and let HA re-add it?

craggy atlas May 16, 2020, 4:03 AM

#

@spice canopy I haven't tried BUT, my Alexa app which i just looked at sees the MyQ and can open and close my door

#

using HA

spice canopy May 16, 2020, 4:08 AM

#

@craggy atlas interesting. But you can not control it as an entity on your dashboard?

craggy atlas May 16, 2020, 4:12 AM

#

@spice canopy Yes, I can control it from my Dashboard. What i can't do is sign in here. .. hmm I forgot i Updated my HA just now so everything looks different. maybe i just needed to update

spice canopy May 16, 2020, 4:22 AM

#

strange. Well if it works - then its one of those annoyances we've all come across at some point

#

hopefully an update sorts it out for you @craggy atlas

craggy atlas May 16, 2020, 4:24 AM

#

Yep, it's working just fine, Now to learn the Overview better to get cards to not go straight down lol

#

Oh Horizontal stack

spice canopy May 16, 2020, 4:27 AM

#

@craggy atlas the layout is a bit clunky....but some people have done some amazing work from what I can tell. It's probably to do with my lack of skill

craggy atlas May 16, 2020, 4:28 AM

#

@spice canopy mosy likely the same for me

spice canopy May 16, 2020, 4:31 AM

#

@craggy atlas trial by fire...literally just got my DNSMasq question sorted and fixed

#

now I can look to moving onto more complicated configuration with secure http and certificates

craggy atlas May 16, 2020, 4:33 AM

#

Yep, I'm starting on my Automation for when Garage Door Opens it flashes a light

spice canopy May 16, 2020, 4:36 AM

#

good luck with that....seems doable like with IFTTT

craggy atlas May 16, 2020, 4:37 AM

#

Actually was extremely simple. I haven't tested but

#

well can't paste images here it seems

spice canopy May 16, 2020, 4:40 AM

#

strangely they allow for GIFs

craggy atlas May 16, 2020, 4:42 AM

#

Ok, I got it to turn on but not flash

green heath May 16, 2020, 4:53 AM

#

Hi, I'm setting up my remote access to HA. I already have a Netgear VPN solution established (OpenVPN), which updates my dynamic IP using NoIP, and it works fine. I just have to establish it every time I'm away from home to access HA (and get alerts, I suppose). This causes all of my mobile traffic to route through my home router internet connection, slowing things down a bit, and increasing my home bandwidth usage. I'd like to get some advice from others about whether this is a workable solution, or should I add the DuckDNS (with LetsEncrypt) Add-On, or should I add Ngninx, which I understand is more robust and solves some of the HTTPS (remote)/HTTP (local) issues. Any advice and pointers to more information would be appreciated. I've read all of the HA docs on all of this. Just can't decide which is optimal. Thanks!

spice canopy May 16, 2020, 5:02 AM

#

@green heath similar to Ngninx....I've seen seen other implementations use Traeffik

lethal root May 16, 2020, 5:21 AM

#

@green heath if you are confident in your VPN I'd just keep that

#

You can also use a different dynamic IP solution other than duckdns

green heath May 16, 2020, 5:23 AM

#

@lethal root I am confident in the current VPN, I just don't yet fully understand what I might be missing using it versus the other alternatives, if anything.

lethal root May 16, 2020, 5:23 AM

#

I use namecheap for example, but that one's not free (8 a year or so?)

#

It's all about ease of access really

#

I have an https domain to access my HA externally

#

That's about it ¯_(ツ)_/¯

#

You should be able to get HTTPS for your noip solution I think

green heath May 16, 2020, 5:26 AM

#

Yeah, IDK, it is NoIP, and is free (which is not the norm), because it is provided by Netgear. Not sure I have many options beyond just the VPN.I remember reading that if you use DuckDNS solution, you can no longer access your HA with HTTP locally? It becomes HTTPS always. Is that true?

#

That's why some people said they chose NGNINX instead, to just serve the HTTPS only.

lethal root May 16, 2020, 5:27 AM

#

Yes that was a problem for

#

The NGinx is a kind of two steps forward 1 step back thing

#

You present https to the outside, but on your home network it's just http

#

Because HA itself is http

green heath May 16, 2020, 5:28 AM

#

That's my understanding.

lethal root May 16, 2020, 5:28 AM

#

But nginx is https and redirects to HA

#

I had to use it like that because google tts doesn't work well with my router

green heath May 16, 2020, 5:29 AM

#

Are there any messages from HA that require one method over another. I can get texts already.

lethal root May 16, 2020, 5:29 AM

#

If your router can do something called NAT loopback it shouldn't be a problem

#

the tts problem is that the google tts service is using an external url (e.g. mraedis.duckdns.org) to call a local service

#

your router needs to "understand" that the service just wants to go back inside

#

But not all routers can do that

green heath May 16, 2020, 5:31 AM

#

According to a quick Google search, my Netgear R8500 does support NAT loopback.

pallid osprey May 16, 2020, 6:09 AM

#

is there an IDE/editor add-on that supports 32 bit machines?

lethal root May 16, 2020, 9:23 AM

#

"File Editor" ?

spice canopy May 16, 2020, 2:58 PM

#

hmmm...it would appear my issues trying to access my HA server via domain name internally is back again. I though using DNSMasq addon was the solution. Would appreciate any insights on how to solve this problem. My router (Google Wifi) does not support Nat Loopback/Hairpin.

mental elm May 16, 2020, 5:36 PM

#

Hi folks! What is the preferred / recommended easy way to backup snapshots? Something like backup to Google drive would be great.

atomic folio May 16, 2020, 5:58 PM

#

Anyone know where the nginx config file stored (HassOS)?

charred veldt May 16, 2020, 7:27 PM

#

Please just help me clarify this: If I don't have the supervised version, is it completely impossible to use add-ons?

sly kindle May 16, 2020, 7:40 PM

#

@atomic folio share folder?

#

docs should say

#

@charred veldt The "supervisor" is a docker container. It manages all the other containers that make up a supervised system. Addons are those docker containers

#

So yes, without the ecosystem that uses that, you have to configure your own. Addons are just software and services which are isolated into containers, which you would normally configure yourself on a manual installation.

frail dragon May 16, 2020, 7:42 PM

#

any good way to check the logs of a plex addon that's failing to start? the log tab on the addon page doesn't have anything at all

sly kindle May 16, 2020, 7:43 PM

#

@frail dragon when any addon doesn't start, you check the supervisor logs.

#

These are on the system tab in the ui

#

Try starting it again, and then go directly to those logs. You should see why

frail dragon May 16, 2020, 7:44 PM

#

ah you're absolutely right. i see it now, port conflict. thanks 🙂

spice canopy May 16, 2020, 9:12 PM

#

dumb question - because i really just don't know, but when I have DNSMasq plugin started, am I supposed to see anything in the logs?

#

as I surf around on my devices, am I supposed to see that traffic register on DNSMasq?

spice canopy May 16, 2020, 11:45 PM

#

just to follow up ... DNSMasq wasn't loading up properly on port 53 on my VM. For whatever reason port 53 was taken up by systemd. It can be resolved through these few commands

#

https://askubuntu.com/questions/907246/how-to-disable-systemd-resolved-in-ubuntu

vale isle May 17, 2020, 2:24 AM

#

Hi All, long time user but have decided to start from scratch rather than migrate
Can anyone help with setting up 'Lets Encrypt'. I own a domain and have a static IP so dont need duckdns. Im running hassio on Raspberry PI and have setup all necessary port forwarding (80,443,8231) dont now how to generate certfile and keyfile

lethal root May 17, 2020, 9:33 AM

#

@vale isle The addon does that for you

#

You just activate it with the proper configuration

vale isle May 17, 2020, 10:46 AM

#

OK thanks @lethal root

vale isle May 17, 2020, 11:34 AM

#

How do I check if 'Lets Encrypt' is working correctly and is secure?

lethal root May 17, 2020, 11:58 AM

#

Change your scheme to https? :)

#

There is also the logs from the le addon

vale isle May 17, 2020, 12:16 PM

#

change scheme in base url?

blissful drift May 17, 2020, 2:48 PM

#

Hey, quick question!
I have 2 pi’s, tried to set up room assistant on theme for floor level tracking (upstairs, downstairs) setup a pi in my bedroom and one downstairs in the living, even if I rest my phone on the bedroom pi can’t manage to convince it to take control, it will be detected by the downstairs one...

lethal root May 17, 2020, 2:52 PM

#

Something like this @vale isle

http:
  base_url: mraedis.url.xyz
  ssl_certificate: /ssl/fullchain.pem
  ssl_key: /ssl/privkey.pem

#

It should be a commented block in your configuration.yaml unless you already removed it

warm obsidian May 17, 2020, 3:27 PM

#

Can anyone help with setting up AdGuard?

#

I've fixed my RbPi IP to 192.168.0.115 using this guide: https://community.home-assistant.io/t/fixed-ip-address/69117

#

I've also installed HA Add-on
Setup guide in AdGuard panel in HA says I need to add these IPs as my DNS servers in my router:

#

https://cdn.discordapp.com/attachments/479349969812324352/711581570703556618/Screenshot_2020-05-17_at_17.09.53.png

#

But when I set them, I lose internet connection completely and can't open any website — I guess that's because I set the wrong DNS
I even tried setting DNS from AdGuard DNS service from here: https://kb.adguard.com/en/dns/setup-guide

#

And with those DNS I end up with the same result — nothing opens.

#

My AdGuard log is here (with debug level): https://gist.github.com/denysdovhan/589c40aa55634403008101911be2afca

lethal root May 17, 2020, 3:37 PM

#

@warm obsidian Do you have any kind of upstream server as well?

warm obsidian May 17, 2020, 3:38 PM

#

@lethal root my upstream settings look like this: https://cdn.discordapp.com/attachments/479349969812324352/711585056883474472/unknown.png

#

this is default configuration, i haven't changed anything

lethal root May 17, 2020, 3:39 PM

#

THere's the problem

#

It needs to know how to get to quad9.net

#

It needs a DNS server for that

#

If your router itself points back to your HA you just get an infinite loop of "idk, let me ask my boss" when you do DNS queries

warm obsidian May 17, 2020, 3:40 PM

#

isn't Bootstrap DNS for that? It's set to 1.1.1.1 in my case

lethal root May 17, 2020, 3:40 PM

#

Right.

#

My bad

#

Maybe add 9.9.9.9 or 8.8.8.8 (google) ?

elder oracle May 17, 2020, 3:40 PM

#

Does anyone have any clue what to put in the platform section when setting up the tuya addon? I am using Brilliant smart, which is based around tuya

warm obsidian May 17, 2020, 3:42 PM

#

@lethal root btw, when i click test upstreams i get: Server "https://dns10.quad9.net/dns-query": could not be used, please check that you've written it correctly

#

even for default 1.1.1.1 server

lethal root May 17, 2020, 3:45 PM

#

I have:
1.1.1.1:53
9.9.9.9:53

#

And for the upstream:
https://dns10.quad9.net/dns-query
https://cloudflare-dns.com/dns-query

warm obsidian May 17, 2020, 3:51 PM

#

doesn't work for me

#

@lethal root testing any upstream (even default one) shows the error: https://cdn.discordapp.com/attachments/479349969812324352/711606265960464405/unknown.png

lethal root May 17, 2020, 3:54 PM

#

What happens when you set your router to not use HA?

warm obsidian May 17, 2020, 3:57 PM

#

What do you mean?

lethal root May 17, 2020, 3:58 PM

#

Do you still get the errors

warm obsidian May 17, 2020, 3:58 PM

#

My router doesn't use adg as dns right now

lethal root May 17, 2020, 3:58 PM

#

ah

#

Did the addon start properly?

#

So not the web gui, but the addon log itself

#

You should have these lines:

2020/05/17 17:59:00 [info] Creating the UDP server socket
2020/05/17 17:59:00 [info] Listening to udp://[::]:53
2020/05/17 17:59:00 [info] Creating the TCP server socket
2020/05/17 17:59:00 [info] Listening to tcp://[::]:53
2020/05/17 17:59:00 [info] Entering the UDP listener loop on [::]:53
2020/05/17 17:59:00 [info] Entering the tcp listener loop on [::]:53

warm obsidian May 17, 2020, 4:02 PM

#

@lethal root my logs are here: https://gist.github.com/denysdovhan/589c40aa55634403008101911be2afca

lethal root May 17, 2020, 4:04 PM

#

how do you set the debug

#

nvm

#

Only thing different is this line @clear oyster
Couldn't load filter 1 contents due to stat /data/adguard/data/filters/1.txt: no such file or directory

#

Did you edit some filter rules or such?

warm obsidian May 17, 2020, 4:24 PM

#

no I did not

autumn flume May 17, 2020, 4:30 PM

#

Anyone having issues with duck dns in general?

steep orbit May 17, 2020, 4:30 PM

#

I just came to ask the same @autumn flume , so yes

lethal root May 17, 2020, 4:30 PM

#

https://github.com/hassio-addons/addon-adguard-home/issues/51 sounds like you could join in deny

autumn flume May 17, 2020, 4:30 PM

#

I'm not using duck dns in homeassistant just on my ubuntu cloud vm

#

but website up but resolution failure

steep orbit May 17, 2020, 4:31 PM

#

I used couple of "testing" websites and they also indicate duckdns to be down

autumn flume May 17, 2020, 4:31 PM

#

Yeah its down

steep orbit May 17, 2020, 4:32 PM

#

too bad .. hope they restore it soon .. 😦

hot fog May 17, 2020, 4:34 PM

#

Is there a way to get a human readable time instead of the timestamp in the mosquitto addon?

autumn flume May 17, 2020, 4:34 PM

#

https://imgur.com/a/Ft4LIZn

steep orbit May 17, 2020, 4:36 PM

#

Good, they acknowledge it now

autumn flume May 17, 2020, 4:36 PM

#

Yeah

hot fog May 17, 2020, 4:41 PM

#

Is there a way to get a human readable time instead of the timestamp in the mosquitto addon?
@hot fog
Is anybody reads this: Just add log_timestamp_format %d.%m.%Y %H:%M:%S to your config. Works great!

autumn flume May 17, 2020, 4:44 PM

#

there back

#

duckdns online

steep orbit May 17, 2020, 4:47 PM

#

is still ont resolving for me 😦 I guess a bit of patience

autumn flume May 17, 2020, 4:49 PM

#

it went down agian

#

kinda up and down

steep orbit May 17, 2020, 4:50 PM

#

ah I see .. then i guess just be patient until they resolve it 100%

#

is unpaid service so that's the little price to pay 🙂

weary stratus May 17, 2020, 5:18 PM

#

Is duckdns down?

steep orbit May 17, 2020, 5:51 PM

#

yes.. still down for me at this time

placid fulcrum May 17, 2020, 6:27 PM

#

I've installed the Glances addon but noticed there are no temperature sensors. According to the integration page this is platform specific. I'm running supervised in a Proxmox VM on an intel NUC, do I have another way to get the temperature sensors?

lethal root May 17, 2020, 6:34 PM

#

Uh phantom

#

You are trying to get hardware sensors from a virtual platform

#

There is no temperature because a VM doesn't have a temperature

placid fulcrum May 17, 2020, 6:35 PM

#

.. right 😅

#

Guess I'll have to tinker around with Proxmox then, in order to get the actual temps

lethal root May 17, 2020, 6:36 PM

#

There is a proxmox integration/addon, but idk what it offer0s

#

It might be community made

#

@placid fulcrum https://www.home-assistant.io/integrations/netdata/ maybe?

#

Install ND on the proxmox host and integrate it into your VM

#

There's probably quite a few more integrations/addons that could help you achieve the same

steep orbit May 17, 2020, 6:50 PM

#

DuckDNS returned for me now 🙂

elder oracle May 17, 2020, 7:26 PM

#

What do I put for the platform line in my tuya configuration is I am using brilliant smart? It is based around the tuya platform.

weary stratus May 17, 2020, 7:57 PM

#

are my automations still going when duckdns is down? And is there anyway to connect locally when duckdns is down?

sly kindle May 17, 2020, 8:12 PM

#

@weary stratus yes they are, and the same local ip address:8123 you would normally use but with https://

weary stratus May 17, 2020, 8:14 PM

#

it doesn't work 😦

sly kindle May 17, 2020, 8:14 PM

#

do you see a warning?

weary stratus May 17, 2020, 8:14 PM

#

no, nothing

sly kindle May 17, 2020, 8:15 PM

#

then it's the wrong address or youre using http and not https

weary stratus May 17, 2020, 8:15 PM

#

i have port 443>8123. So i entered https://myip:443

sly kindle May 17, 2020, 8:15 PM

#

no

#

why

#

it's always going to be 8123 internally

weary stratus May 17, 2020, 8:16 PM

#

okey

#

it worked 🙂

#

you were right

sly kindle May 17, 2020, 8:16 PM

#

unless you change it

weary stratus May 17, 2020, 8:16 PM

#

thanks

drifting sentinel May 17, 2020, 9:01 PM

#

Ive installed the ngnix add on installed i can get a https connection locally but not from the internet any ideas, ive opened up port 443

drifting sentinel May 17, 2020, 9:39 PM

#

do i need to configure to allow external networks or should it work just out of the box

junior mountain May 17, 2020, 10:40 PM

#

You forward ports?

atomic stone May 18, 2020, 2:45 AM

#

so I'm trying to do some analysis of my sensor data

#

and I found https://data.home-assistant.io/ which leads me to install JupyterLab Lite add on, but the installation fails and then on the page for that I see maintained: no

#

so I'm confused is this data science portal a supported hass.io thing or no?

#

I guess this answers it, the last blog post was dec 2018 https://data.home-assistant.io/blog/

#

well it installed this time...

#

I'm going to give it a go and see how far I can get

faint terrace May 18, 2020, 5:16 AM

#

I wonder if anyone has ideas on the Letsencrypt add-on. I migrated from duckdns to letsencrypt/dns/cloudflare, and the logs shows the certificates were updated successfully. I updated the http entry in my confirg file from base_url: https://noidsan.duckdns.org:8123 (not actual address!) to base_url: https://noidsan.mydomain.com and restarted. I'm not able to connect via https://noidsan.mydomain.com nor locally https://192.168.1.100:8123. I can still get in to my config file via Samba share. Any ideas would be appreciated. After today's duckdns outage, I'm looking to move over to cloudflare. Thanks!

rugged sinew May 18, 2020, 8:26 AM

#

Does MotionEye take a lot of CPU power? I am consider installing it on my PI 3b+ but I dont want to bog down the CPU.

dusk vigil May 18, 2020, 9:42 AM

#

@rugged sinew How much cams?

amber quest May 18, 2020, 9:56 AM

#

can I make an html/php page on a somethink port ?

dusk vigil May 18, 2020, 11:39 AM

#

heh?

stiff palm May 18, 2020, 12:12 PM

#

Is this the channel for asking about ESPHome related stuff?

atomic stone May 18, 2020, 12:13 PM

#

probably?

stiff palm May 18, 2020, 12:15 PM

#

OK, so I am trying to replicate a Bruh DIY type multisensor with ESPHome. I got the PIR sensor and light sensor (TEMT6000) working, but getting a communication failure with BME280. I read a long discussion on this in the forums, but was wondering if anyone here has any input on what it could be.

livid spruce May 18, 2020, 1:20 PM

#

Hi folks. I’ve been running AdGuard Home without issue for a month or so now. Today, however, I can’t seem to get out anywhere (or, at least, most) places when connected though Adguard Home.

Has anyone ever experienced this? Any ideas about what could cause it to just stop working suddenly?

atomic stone May 18, 2020, 1:33 PM

#

I am a heavy user of esphome feel free to ask

#

@stiff palm

peak onyx May 18, 2020, 2:07 PM

#

hello everyone...I am trying to add a second model to my Doods integration but can't seem to get it right. Anybody have any experience doing this?

lethal root May 18, 2020, 2:09 PM

#

#integrations-archived @peak onyx

#

@rugged sinew in my experience camera stuff on the rpi 3b kills the pi.

#

3 cameras and I had 70-80% cpu non stop

#

@faint terrace do you port forward 443 to 8123?

peak onyx May 18, 2020, 2:13 PM

#

but Doods is an add-on, no?

stiff palm May 18, 2020, 2:20 PM

#

Thanks @atomic stone. i have messaged you.

lethal root May 18, 2020, 2:23 PM

#

You said integration though :P

peak onyx May 18, 2020, 2:26 PM

#

haha this is truew

faint terrace May 18, 2020, 2:28 PM

#

@faint terrace do you port forward 443 to 8123?
@lethal root I thought with the dns challenge method that port forwarding was unnecessary? And it doesn’t explain why I can get in with my localip:8123.

I’ll try turning off ssl via samba and rebooting.

lethal root May 18, 2020, 2:30 PM

#

Yes port fwd is unnecessary... For let's encrypt

#

Someone still needs to tell outsiders where to find your ha instance

#

@faint terrace does your HA instance have it's own external IP?

#

Because right now what's happening is SOmeone asks "The $IP" for yoururl.com, they get the $IP for your router, and your router goes "That's right, this is $IP!"

#

Unless you tell your router "When someone asks for $IP at port xyz, what they really want is my HA instance" (a.k.a. port forwarding) nothing will happen

atomic stone May 18, 2020, 2:43 PM

#

@stiff palm let's chat here

stiff palm May 18, 2020, 4:00 PM

#

Hi @atomic stone
Thanks for agreeing to help on the BME280 issue. I am getting a "communication failed with BME280" message
I read through the forums, tried everything mentioned there, tested connections etc, but no success. Any idea how to debug this? I am running HassIO
I also have a supervised docker installation on a Ubuntu VM on my primary machine. If needed, I can use that as well.

faint terrace May 18, 2020, 5:01 PM

#

@lethal root I wonder if what I really want to do is a reverse proxy on a subdomain, something like Traefik where I can point to https://homeassistant.mydomain.com and have it resolve to the proper location within my router/internal network. I have that setup running on a PlexGuide install - but because of that I don't think I can do it twice, with a different domain to the same router IP address.

lethal root May 18, 2020, 5:02 PM

#

You can have as many domains as you like pointing to one router

#

If your router can route them :P

#

This is why I have the nginx proxy addon

#

All port 443 and 80 traffic is routed to the addon

#

The addon sees what server toy are trying to reach and forwards accordingly

#

Toy->you

dense spadeBOT May 18, 2020, 6:17 PM

#

@runic shell posted a code wall, it is moved here --> https://paste.ubuntu.com/p/wfqt5qhrN6/

runic shell May 18, 2020, 6:19 PM

#

having trouble with tileboard trying to get it to send remote commands. Can anyone help?

#

{
position: [1, 1],
type: TYPES.CUSTOM,
title: 'Mute',
id: 'remote.media_room',
icon: 'mdi-volume-off',
action: function(item, entity) {
Api.send({
type: 'call_service',
domain: 'remote',
service: 'remote.send_command',

                       service_data: {
                       entity_id: 'remote.media_room',
                       device: 61163961,
                       command: 'Mute',
                       
                       }
                   });

               }
            },

#

i have also tryed api.request

boreal vale May 18, 2020, 7:04 PM

#

My duckdns Hass.io says "Unable to connect to Home Assistant". HA is working fine though, when i access through ip

runic shell May 18, 2020, 7:17 PM

#

have you port forward your router

boreal vale May 18, 2020, 7:22 PM

#

yes, 8123 and 443

runic shell May 18, 2020, 7:24 PM

#

does connect when on the same network? have you installed ngix

boreal vale May 18, 2020, 7:25 PM

#

it connects to ip, not through duckdns-name

#

no ngix

runic shell May 18, 2020, 7:26 PM

#

you have to install ngix now i couldnt get it to work without

boreal vale May 18, 2020, 7:26 PM

#

how?

runic shell May 18, 2020, 7:26 PM

#

in the addon store

boreal vale May 18, 2020, 7:27 PM

#

trying now 🙂

sly kindle May 18, 2020, 7:31 PM

#

@boreal vale you shouldn't have to use nginx, but you might prefer it

runic shell May 18, 2020, 7:33 PM

#

i couldnt get it to work without it

sly kindle May 18, 2020, 7:33 PM

#

forwarding 443 to 8123 or 8123 to 8123, and the proper http: configuration is all you should need

boreal vale May 18, 2020, 7:45 PM

#

ports are forwarded to their internal port, somehow i can't set 443 to 8123. I try to access over port 8123 though

solar osprey May 18, 2020, 8:14 PM

#

Anyone have a few minutes to help me out?

little pine May 18, 2020, 9:42 PM

#

I'm hoping to find some help. I'm relatively new to HA. I've gotten a lot working, but MQTT is kicking my butt. I've read loads of tutorials and watched a bunch of videos. I can't seem to have entities show up. I've tried auto discovery & legacy. Logs and console both show devices connected, but no entities appear in integrations. I'm sure I'm missing something simple. Is this the right place to ask?

supple vortex May 18, 2020, 10:00 PM

#

I'm hoping to find some help. I'm relatively new to HA. I've gotten a lot working, but MQTT is kicking my butt. I've read loads of tutorials and watched a bunch of videos. I can't seem to have entities show up. I've tried auto discovery & legacy. Logs and console both show devices connected, but no entities appear in integrations. I'm sure I'm missing something simple. Is this the right place to ask?
@little pine have you set your devices to be auto discoverable to HA?

little pine May 18, 2020, 10:00 PM

#

yes

#

I currently have 2 switches I'm trying to add. Since autodiscovery didn't work, I tried one as legacy. It seems that i've managed to get that one working.

#

I'd prefer auto discovery if it works though.

#

I think I spoke too soon. I see the entity in my list of switches, but it doesn't appear to be actually connected to the physical switch.

#

nevermind. I've got the legacy one working now. I'll just use that approach. Thanks anyway.

drifting sentinel May 18, 2020, 10:24 PM

#

has anyone had any luck with installing homekit from apple

rancid canyon May 19, 2020, 6:08 AM

#

I;m having troubles installing some of the hass.io addons. Not all of them but some. i get a fail message saying: Failed to install addon, Unknown Error, see logs.

looking in the supervisor log i resd this:

#

20-05-19 06:07:08 INFO (SyncWorker_3) [supervisor.docker.interface] Pull image hassioaddons/influxdb-amd64 tag 3.6.2.
20-05-19 06:07:37 ERROR (SyncWorker_3) [supervisor.docker.interface] Can't install hassioaddons/influxdb-amd64:3.6.2 -> 404 Client Error: Not Found ("no such image: hassioaddons/influxdb-amd64:3.6.2: No such image: hassioaddons/influxdb-amd64:3.6.2").

#

this is happening to some of the addons but not all.

Anyone knows a solution?

#

had this kind of error whith Z2m assistant as well. Eventually it installed but only after several days and many attempts.

silk geode May 19, 2020, 7:19 AM

#

Hey. Not sure this would be the right sub-group, but I receive the following error Login attempt or request with invalid authentication from 127.0.0.1 for a couple of days now. How do I find out what this is?

little imp May 19, 2020, 8:40 AM

#

Hi everyone, I would like to make an automation with trigger is when an addon start or stop? How can I do it? The reason is my internet network is unstable, everytime it's down, the duckdns addon stops but it don't auto restart when internet backs. Thanks!

stiff current May 19, 2020, 9:16 AM

#

you could create a presence detection to a public IP with ping integration.then create an automation which starts dns addon as soon as the public IP is available again

#

service: hassio.addon_start -> addon: core_duckdns

tight gull May 19, 2020, 1:07 PM

#

Hi guys, I'm trying to work out the influxdb addon. If I wanted to tag each sensor output by it's device what do I set in the "tag_attributes" section in the configuration.yml?

marble pumice May 19, 2020, 1:57 PM

#

Morning. Im having a problem setting the NGINX addon 😦

#

Is this the right place to ask?

marble pumice May 19, 2020, 2:19 PM

#

OK.. its solved. It was giving me bad gateway.. put the default 443 port and ha on its 8123 and it's working fine. I wanted to use different ports and things broke.. but now it;s OK.

plush loom May 19, 2020, 4:56 PM

#

whats considered best way to use letsencrypt for supervisor/vm installs? The letsencrypt addon?

sly kindle May 19, 2020, 5:25 PM

#

you have your own domain?

#

@plush loom

plush loom May 19, 2020, 5:32 PM

#

yep

#

Im trying to do the letsencrypt addon if possible.

sly kindle May 19, 2020, 5:33 PM

#

the nginx proxy manager is a little more convenient, and will also get cert from LE

#

the addon

plush loom May 19, 2020, 5:34 PM

#

okay will check it out

wraith flame May 19, 2020, 5:47 PM

#

Would I talk about HACS here?

sly kindle May 19, 2020, 5:47 PM

#

HACS is a custom integration. Not an addon

wraith flame May 19, 2020, 5:48 PM

#

Rgr, ty and sorry

sly kindle May 19, 2020, 5:48 PM

#

so #integrations-archived or the HACS discord

wraith flame May 19, 2020, 5:48 PM

#

oh they have their own

sly kindle May 19, 2020, 5:48 PM

#

sent an invite

#

if "they" is ludeeus...yes 😆

wraith flame May 19, 2020, 5:48 PM

#

@sly kindle No one better than you friend!

sly kindle May 19, 2020, 5:48 PM

#

thinkerguns

deep gate May 19, 2020, 6:32 PM

#

Good afternoon guys

#

is anyone online?

dark yoke May 19, 2020, 6:33 PM

#

Around 5K.....

deep gate May 19, 2020, 6:33 PM

#

quite a few of us online then

#

my first time on the discord

#

I am just getting started on HA

#

and I dont know if I chose the right channel to ask for help but ill try here first

#

I did a fresh install of hassio on a raspberry pi 3B

#

and when im trying to setup samba and access it on windows 10

#

it throws me an error for ipv6

#

i had setup the password and interface for wlan0 as im using wifi, default workgroup

#

but i just cant make it work

#

has anyone been through this before?

sly kindle May 19, 2020, 6:36 PM

#

you can usually leave the interface blank

#

what do the addon logs say

deep gate May 19, 2020, 6:37 PM

#

im going to get the log, just 1 sec

dense spadeBOT May 19, 2020, 6:38 PM

#

@deep gate posted a code wall, it is moved here --> https://paste.ubuntu.com/p/bhC8HGQBPn/

deep gate May 19, 2020, 6:39 PM

#

those are the last 25 or so lines of the log, i will do a ubuntu pastebin with the full log

#

https://paste.ubuntu.com/p/RHTJNxjJqt/

#

the full log @sly kindle

sly kindle May 19, 2020, 6:41 PM

#

did you change the addon config?

deep gate May 19, 2020, 6:42 PM

#

just set a username and password for the config

#

as it wont run on the default config

#

and when i put them in quotes, after i save it, the config removes the quotes on its own

sly kindle May 19, 2020, 6:44 PM

#

do you have - fe80::/10 in your allow_hosts? I just realized I don't

#

but I thought it was there... raised_eye

deep gate May 19, 2020, 6:44 PM

#

yes, its there on the config

sly kindle May 19, 2020, 6:44 PM

#

it's in the docs

deep gate May 19, 2020, 6:45 PM

#

i can remove it and run it, see if it works

#

as its a fresh install im not afraid of breaking it and starting over

sly kindle May 19, 2020, 6:45 PM

#

you have your network using ipv6 everywhere?

#

that's a list of allowed ips...removing it won't do anything to help I think

#

Connection denied from ipv6:2804:14d:783a:9a22:a472:4121:f7c6:350c:3393 to ipv6:2804:14d:783a:9a22:7acc:f6f1:df47:86a6:445```

deep gate May 19, 2020, 6:47 PM

#

yeah, thats what its throwing in the end

#

and i dont think im using ipv6 everywhere

sly kindle May 19, 2020, 6:48 PM

#

is 192.168.0.29 your HA instance?

deep gate May 19, 2020, 6:48 PM

#

i may try to kill ipv6 on windows

#

it is

sly kindle May 19, 2020, 6:48 PM

#

yeah not sure why it's using ipv6

deep gate May 19, 2020, 6:48 PM

#

ive read somewhere about an updated windows version pushing ipv6 host solving

#

https://community.home-assistant.io/t/windows-10-cant-access-hassio-through-samba/30496/72

#

https://community.home-assistant.io/t/windows-10-cant-access-hassio-through-samba/30496/72

#

Thanks for the hint @Illes_Eszterhas !
I did not notice that Windows 10 started to resolve the hostname of my ubuntu server to its ipv6 address after the update to 1809.
I had the allow host setting set to the ipv4 range and was therefore denied access since the windows update. The Samba log showed this as well.

Solution? Disable ipv6 in ubuntu or remove the allow host samba setting. Disabling ipv6 in windows 10 does not seem to be a good idea. Apparently, at least edge and store apps demand it.

#

an user said that on windows version 1809 its pushing agressively for host resolving using ipv6

#

but im lost on where to go with that info

sly kindle May 19, 2020, 6:53 PM

#

it says remove the allow host setting...but not sure what they mean

deep gate May 19, 2020, 6:54 PM

#

yeah I am stumped on this one

sly kindle May 19, 2020, 6:55 PM

#

how are you trying to connect?

#

are you entering the ip address in file explorer address bar?

deep gate May 19, 2020, 6:55 PM

#

windows network tab

sly kindle May 19, 2020, 6:55 PM

#

no

#

don't bother with the networks panel

#

open file explorer and type this in the address bar \\192.168.0.29

#

or..whatever your ip was

#

(with the backslashes)

deep gate May 19, 2020, 6:57 PM

#

thank, entering it through IP Address worked

sly kindle May 19, 2020, 6:58 PM

#

and then just pin that to your favorites or map it

deep gate May 19, 2020, 6:58 PM

#

now we know if somebody is getting that ipv6 denied, its most likely somebody trying the network tab

sly kindle May 19, 2020, 6:58 PM

#

well, you can pin the individual directories like config

#

yeah the ipv6 business confused me or I would have given you that advice straight away

#

now i know

deep gate May 19, 2020, 7:01 PM

#

yeah, that one also got me stumped because everyone that i saw setting up was doing the same as I was

#

thanks for the help again cogneato

sick minnow May 19, 2020, 7:14 PM

#

Hey guys, I hope this is the right channel to ask but is the DuckDNS Addon supposed to update my IPv4 and IPv6 record? Currently the script doesn't update my ip address records and I have to do it manually or with a script in my router. It's not the best solution since my home assistant box and my router of course don't have the same IPv6 address.

lethal root May 19, 2020, 8:10 PM

#

That's exactly what the duckdns addon is supposed to do

#

So if it's not, there's obviously something wrong @sick minnow

sick minnow May 19, 2020, 8:27 PM

#

Well, it generated the certificates which is great but I don't know why it doesn't update my ip address records.. There's no error in the log. Where else can I look?

inner osprey May 20, 2020, 12:08 AM

#

Can anyone help with a husbzb-1 nortek on hassio running atop Virtualbox? USB device doesn't show up under hassio but does under VB?

haughty temple May 20, 2020, 2:24 AM

#

Evening All,

Has anyone had an issue where the homeassistant/home-assistant docker image doesn't show the custom repository option?

#

Looks like the issue is that i only have ha-core, no supervised. Is there a formal docker image with supervised? I can't find anything and the only forum I found led to a document missing the information it says to look at.

sly kindle May 20, 2020, 2:48 AM

#

@haughty temple a supervised installation begins with having the supervisor, not with having HA

#

And installing on generic linux is currently something where the docs have been archived

raven flint May 20, 2020, 2:49 AM

#

I keep getting Disconnected: Did not receive auth message within 10 seconds when I use the NodeRed Addon in my logs. Base install nothing setup apart from password

#

Very annoying as its cluttering logs with entry every few minutes

haughty temple May 20, 2020, 2:51 AM

#

@sly kindle so basically the recommended install on the home-assistant.io/docs/installation/ page where it says docker for anybody already using docker under recommended installs really means, docker if you don't want to use any form of a custom repository? I want to integrate an LG AC unit using the ThinQ system.

sly kindle May 20, 2020, 2:55 AM

#

"docker if you don't want to run a supervised install", yes. You are running only the "core" of Home Assistant and you would add other containers (available out there) to extend/add other software and services. In a supervised install these other containers are "addons" and are more integrated with HA.

haughty temple May 20, 2020, 2:55 AM

#

i think i'm gonna migrate my install to the full HA to get the full integration of HA.

#

trying to figure out what i was missing here showed me a ton of things i could use but it all started with an AC unit lol

sly kindle May 20, 2020, 2:57 AM

#

I don't know that there is an LG thinq integration though.

haughty temple May 20, 2020, 2:57 AM

#

there isn't a formal one

#

there is a highly positively reviewed custom repo though that does it

#

which i can't add in core

sly kindle May 20, 2020, 2:58 AM

#

a custom integration? or a custom addon?

#

got a link?

haughty temple May 20, 2020, 2:58 AM

#

https://github.com/sampsyo/hass-smartthinq

sly kindle May 20, 2020, 2:58 AM

#

is it this? https://github.com/ollo69/ha-smartthinq-sensors

haughty temple May 20, 2020, 2:59 AM

#

no but i'll look at that one

#

the sampsyo one had a last commit of 9 days ago so he seems to still be supporting it

sly kindle May 20, 2020, 2:59 AM

#

ah ok. that's another one

#

and that's a custom integration, so not related to addons

haughty temple May 20, 2020, 3:00 AM

#

is a custom integration better or worse to use then an add-on?

sly kindle May 20, 2020, 3:01 AM

#

integrations are things that built in to HA. You add a configuration for them and then they are activated, basically. Current count is 1582 integrations https://www.home-assistant.io/integrations

#

Addons are docker containers that follow a template for HA, and those add anything from your basic tyipcal software package like samba, to more complex server/services like...plex media server or wireguard VPN tunnel, Visual Studio Code editor, etc

#

So what you are looking at is a custom integration. An integration that isn't officially part of HA, but sort of "side loaded"

#

Not better or worse.

#

I use a custom integration for my sprinkler system...

#

But you don't need the supervisor and addon support to add what you are looking to add

#

@raven flint you might try a ha core rebuild ?

#

if this is a token issue

raven flint May 20, 2020, 3:08 AM

#

I will try it

lethal root May 20, 2020, 7:09 AM

#

@sick minnow did you get any further?

sick minnow May 20, 2020, 7:43 AM

#

@lethal root I looked through the logs of the containers but didn't find anything useful.. It behaves like it wouldn't have a function to update my records. For now it works with my router updating only my IPv4 but who knows how long it'll take until my providers shuts down IPv4

lethal root May 20, 2020, 7:44 AM

#

Are you sure your token/ login is good?

sick minnow May 20, 2020, 7:44 AM

#

Every 5 minutes the container prints this into the log:
[09:36:37] INFO:
Every 5min exactly.. But no info is given

#

I'm using the same token that I'm using in my router

lethal root May 20, 2020, 7:45 AM

#

Have you tried deleting and reinstalling the addon

sick minnow May 20, 2020, 7:46 AM

#

Good idea, give me a few minutes to do that

#

Still the same after reinstalling, empty INFO blocks in the log..
The certificate generation, etc. worked fine though, it just doesn't seem to update my records

lethal root May 20, 2020, 7:51 AM

#

The LE part is kind of separate, so that's not weird it works

#

What's your config? Without the token

sick minnow May 20, 2020, 7:55 AM

#

lets_encrypt:
  accept_terms: true
  certfile: certificate.pem
  keyfile: privkey.pem
token: xyz
domains:
  - '*.xyz.duckdns.org > xyz.duckdns.org'
aliases: []
seconds: 300

lethal root May 20, 2020, 8:24 AM

#

That domain doesn't sound right

#

Why do you have a > in your domain @sick minnow

sick minnow May 20, 2020, 8:27 AM

#

@lethal root That means that it includes all subdomains in the certificate, because I have my home assistant at home.xyz.duckdns.org

I found it here: https://github.com/home-assistant/hassio-addons/issues/336

lethal root May 20, 2020, 8:32 AM

#

Hmmm

#

But your HA doesn't use any other (sub) domain right?

dark yoke May 20, 2020, 8:34 AM

#

@sick minnow it can not update the records when you do it like that, if you want to generate certificate that way, use the duckdns integration to update the records

charred veldt May 20, 2020, 8:35 AM

#

Hello all! I'm using the "Unifi" add-on for device tracking. Is there some way of "cleaning" the tracked device/device tracker list?

#

For instance, removing duplicates or changing names which are no longer active.

sick minnow May 20, 2020, 8:40 AM

#

@lethal root Well, I have home, plex, nas, and other subdomains currently and my hassio works as a reverse proxy for those

#

@dark yoke Is there any way to get subdomains working and update my records?

lethal root May 20, 2020, 8:41 AM

#

Get ssl through the advanced nginx proxy, and use duckdns only for ip?

sick minnow May 20, 2020, 8:42 AM

#

Yes, the nginx proxy "attaches" ssl to everything and redirects it to my local server (plex for example)

dark yoke May 20, 2020, 8:42 AM

#

no

lethal root May 20, 2020, 8:42 AM

#

Not that nginx proxy

sick minnow May 20, 2020, 8:43 AM

#

The duckdns addon generates the certificate that my reverse proxy uses. It works fine so far, I'm just not sure if this is the best way to handle it

lethal root May 20, 2020, 8:44 AM

#

My nginx proxy manager generates the certs itself

sick minnow May 20, 2020, 8:45 AM

#

Are they self signed ones?

lethal root May 20, 2020, 8:45 AM

#

No, they are through let's encrypt

sick minnow May 20, 2020, 8:45 AM

#

How did you manage to do that? You use DuckDNS too, right?

lethal root May 20, 2020, 8:46 AM

#

Nope, I use namecheap

#

There are two nginx proxy addons

#

The second is a bit more advanced from what I can tell

#

I'm guessing you use the first and I the second

sick minnow May 20, 2020, 8:49 AM

#

I use "NGINX Home Assistant SSL proxy"

lethal root May 20, 2020, 8:49 AM

#

That's the first

#

The second is "Nginx proxy manager"

sick minnow May 20, 2020, 8:50 AM

#

lets_encrypt:
  accept_terms: true
  certfile: certificate.pem
  keyfile: privkey.pem
token: xyz
domains:
  - xyz.duckdns.org
aliases:
  - domain: '*.xyz.duckdns.org'
    alias: xyz.duckdns.org
seconds: 300

This seems to work without errors.. Do you see any issue in this?

lethal root May 20, 2020, 8:50 AM

#

The first requires you to get your certs with another addon

#

The second does it on its own

#

I don't have experience with alias in the ddns

#

Give it a go? What's the worst that could happen :P

sick minnow May 20, 2020, 8:53 AM

#

Well, it seems to work fine, it updates my records and I can still access it without a certificate error.. But the certificate could be cached

lethal root May 20, 2020, 8:53 AM

#

You can see the issue date, no?

sick minnow May 20, 2020, 8:55 AM

#

I can only find "Valid from" and "Valid to"

#

"Valid from" is 2020-04-10

lethal root May 20, 2020, 8:55 AM

#

In Firefox you can look at a cert closely

#

It has a not before: part with date and hour

sick minnow May 20, 2020, 8:58 AM

#

I can only find the date in the file system, ls -l shows it's created today but in Chrome I cannot find the exact date

lethal root May 20, 2020, 8:58 AM

#

Ls -L should have an hour as well?

sick minnow May 20, 2020, 8:59 AM

#

10:42
That seems to be correct, just some minutes ago

#

I installed firefox and it says Not Before 4/10/2020, 8:51:33 PM (Central European Summer Time)
Seems like it is cached

#

@lethal root It wasn't as easy as hoped.. After restarting the SSL proxy it told me that I don't have a valid certificate.. Too bad

lethal root May 20, 2020, 9:24 AM

#

I highly recommend the proxy manager

#

So use the duckdns for ip, and the proxy manager for per-(sub) domain certs and ssl

civic seal May 20, 2020, 9:38 AM

#

Does anybody knows which folder is /share for hassio on raspberry ? I am trying to create the /share/nginx_proxy/*.conf file but not sure where to save the file.

dusk beacon May 20, 2020, 11:17 AM

#

hi guys, since 110 i found that i'm not able to edit my esphomes through the addon, seems the edit button doens't function anymore... known issue??

civic seal May 20, 2020, 11:38 AM

#

No problems with esphome here.

weary stratus May 20, 2020, 12:10 PM

#

aiuto configurazione btcino myhome?

#

salve a tutti

lethal root May 20, 2020, 12:11 PM

#

English please?

weary stratus May 20, 2020, 12:15 PM

#

help setup bticino my home?
Hello everyone

lethal root May 20, 2020, 12:17 PM

#

What have you already done so far? Where are you stuck? What's the problem?

weary stratus May 20, 2020, 12:29 PM

#

i started now i downloaded and installed the image on raspberry 3 b +

#

it's my first approach to the system

lethal root May 20, 2020, 12:30 PM

#

Are you able to connect to the web interface at http://ipaddress:8123?

weary stratus May 20, 2020, 12:30 PM

#

yes

#

preparing in this moment

lethal root May 20, 2020, 12:31 PM

#

So you see a supervisor tab bottom left?

weary stratus May 20, 2020, 12:32 PM

#

67/5000
I'm still waiting for it to start
is the configuration complicated?

lethal root May 20, 2020, 12:33 PM

#

Not complicated, but read carefully

#

It's easy to put a wrong number somewhere

weary stratus May 20, 2020, 12:39 PM

#

159/5000
Devices and services are represented in Home Assistant as integrations. You can set them now, or do it later from the configuration screen.

#

naw here

#

mow

#

now

#

but I can't find any bticino or openwebnet device ..

#

Mraedis
now I'm supervising

blazing crest May 20, 2020, 2:28 PM

#

could someone help me with a clarification on duckdns? I've gotten the addon installed, duckdns setup and the token and domain in the config (Supervisor > Duck DNS > Configuration). I have also set accept_terms: true for use with LetsEncrypt.

It's my understanding DuckDNS addon takes care of the LetsEncrypt side yes?

Secondly, do I need to update configuration.yaml still? The DuckDNS Documentation doesn't say to, but everything I find online is doing the config manually and not through the gui like I did. DuckDNS is working for other ports I have open, but not for HA for some reason and I think it's due to something I haven't done that needs to be done.

lethal root May 20, 2020, 2:40 PM

#

DDNS takes care of the LE yes

#

And you need to edit your configuration to use SSL

#

That would be the part with the:

ssl_certificate: /ssl/fullchain.pem

ssl_key: /ssl/privkey.pem

blazing crest May 20, 2020, 2:41 PM

#

ah ok, I wasn't sure if that was still needed or not

lethal root May 20, 2020, 2:41 PM

#

Also the base_url

blazing crest May 20, 2020, 2:41 PM

#

and the base url doesn't need https:// or the port at the end correct?

lethal root May 20, 2020, 2:41 PM

#

Just follow the example in the comments (unless you removed it?)

#

http:

base_url: example.duckdns.org:8123

blazing crest May 20, 2020, 2:42 PM

#

there wasn't an example in my configuration.yaml file

lethal root May 20, 2020, 2:42 PM

#

That old an install, huh?

blazing crest May 20, 2020, 2:42 PM

#

don't think so

#

just installed it yesterday

lethal root May 20, 2020, 2:42 PM

#

weird.

#

Anyway

#

the port at the end is up to you

#

That's what the router forwards are for

blazing crest May 20, 2020, 2:43 PM

#

right, which I can handle

#

thank you! It's updating to 0.110.0 right now. I'll test that after it's done

#

thank you!

lethal root May 20, 2020, 2:45 PM

#

np

blazing crest May 20, 2020, 3:35 PM

#

yup, that did the trick

lethal root May 20, 2020, 4:26 PM

#

👌

weary stratus May 20, 2020, 6:57 PM

#

Hi all!
I am having some trouble with the NodeRED add-on lately.
I have a serial port device plugged into the Raspberry Pi (hosting Home Assistant). The serial port registers at /dev/ttyACM0. I would open this port in the NR addon and filter out my data and push it to HA entities. This worked for about a month, until 3 days back.
Now NR says :

"serial port /dev/ttyACM0 error: Error: Error: No such file or directory, cannot open /dev/ttyACM0"

#

I have tried restarting NR, HA, unpluigging and replugging the device, etc. to no avail.

#

I can cat /dev/ttyACM0 from SSH and see the data coming in

#

So the port exists and responds

#

I can see it registering on lsusb and dmesg as well. Any pointers what I can look into?

#

Posting this in the #node-red-archived channel

gusty night May 20, 2020, 7:59 PM

#

hi, trying to get the nginx proxy manager running. i have mariadb installed but for some reason this add-on wont start, shows nothing in the logs

granite osprey May 20, 2020, 7:59 PM

#

Do you have anything running on ports 80,81, or 443?

gusty night May 20, 2020, 7:59 PM

#

can it not run concurrently with the NGINX HA SSL proxy?

granite osprey May 20, 2020, 7:59 PM

#

No

#

The nginx proxy manager has its own proxy

#

So you would disable the other one

#

and just use the nginx proxy manager

gusty night May 20, 2020, 8:00 PM

#

ah ok. got it.

#

i also have adguard running on 80

granite osprey May 20, 2020, 8:00 PM

#

Yeah, you'll want to change the port

gusty night May 20, 2020, 8:00 PM

#

got it

granite osprey May 20, 2020, 8:01 PM

#

For something where you can't like emulated_hue, you want to just put 80 from the proxy manager somewhere else like 84 and then port forward 80 on your router to 84

#

That way http to https redirects still work for all external requests

gusty night May 20, 2020, 8:03 PM

#

yes, got it, very helpful thanks @granite osprey

#

now to figure out how to get these cameras work in HA

granite osprey May 20, 2020, 8:03 PM

#

Enjoy!

lethal root May 20, 2020, 8:05 PM

#

adguard on 80

#

Noooo

gusty night May 20, 2020, 8:09 PM

#

its only internal, not exposed to the outside

tidal granite May 20, 2020, 8:50 PM

#

Hey all, this might be noob question. I am trying to add the Lovelace animated weather card

#

duh, ok as I tried to copy and paste the error, I saw the UI updated . I copied and pasted weather.yourweatherentity

#

the UI, autocompleted as weather.home

cunning lava May 20, 2020, 8:54 PM

#

I cannot believe no one has thought about having a version selection when installing an addon, so there must be a reason why this is not available. At the moment there is a problem with the zigbee2mqtt addon where the latest version has not been pushed to dockerhub, being able to select the previous version would be handy to install the previous version.

craggy atlas May 20, 2020, 10:02 PM

#

Anyone know of a Amazon Package tracking plugin

raven flint May 20, 2020, 10:40 PM

#

I keep getting
Disconnected: Did not receive auth message within 10 seconds
when I use the VSCode Addon in my logs. Base install nothing setup apart from password
Very annoying as its cluttering logs with entry every few minutes

#

In supervisor: 20-05-20 21:13:58 ERROR (MainThread) [supervisor.api.proxy] Client error on WebSocket API Cannot connect to host 172.30.32.1:8123 ssl:False [Connection refused].

sly kindle May 20, 2020, 10:48 PM

#

You'll see those when you restart HA and node red is trying to connect to something that isn't there. Then they should stop when HA is back up

#

@raven flint

raven flint May 20, 2020, 10:49 PM

#

They are coming up every minute

#

well after boot

#

going to take a look at iptables and Ubuntu 20.20 docker support, this isn't happening under HassOS

sly kindle May 20, 2020, 10:53 PM

#

you're on Ubuntu?

raven flint May 20, 2020, 10:53 PM

#

Ubuntu 20.20 Supervised

sly kindle May 20, 2020, 10:54 PM

#

mmm

#

Debian is going to be a better choice for a supervised install, as it will be more neutral than ubuntu

#

That's more of a strong hint wink wink than it is a rumor

raven flint May 20, 2020, 10:57 PM

#

too late now have setup VLANs, Serial Devices, Ubuntu specific software

sly kindle May 20, 2020, 10:57 PM

#

😛

raven flint May 20, 2020, 10:57 PM

#

but I think I can fix this

sly kindle May 20, 2020, 10:59 PM

#

You might check the community repo discord since it's a community add-on. Maybe the 10 sec message is familiar to someone there

raven flint May 20, 2020, 11:00 PM

#

I mean: https://github.com/home-assistant/operating-system/issues/590

https://github.com/home-assistant/operating-system/issues/224

#

Definitely others with this issue

raven flint May 20, 2020, 11:18 PM

#

Does HASS store logs persistently, as its generating so much output worried about disk space now

#

@sly kindle Would you recommend moving to HASS OS for better support?

sly kindle May 20, 2020, 11:39 PM

#

For the best support, yes, since that's what the project is. But I understand the needs of a supervisor on Linux install and have run it that way in the past.

raven flint May 20, 2020, 11:39 PM

#

I will try and move eventually

boreal stratus May 21, 2020, 12:36 AM

#

Hello

#

Anyone have HACS? I have a giant "HACS" logo at the bottom of all my lovelace pages after the latest update

#

Latest update as in latest update to Home Assistant itself

#

And that was a weird issue

#

I nuked all of Chrome's history and reloaded everything

#

problem seems to be solved

restive lily May 21, 2020, 12:44 AM

#

@boreal stratus I’m seeing it too, even on the iOS app. Did clearing chrome history fix it there too?

boreal stratus May 21, 2020, 12:45 AM

#

I didn't check iOS yet

#

Well, the iOS app is freezing with the latest update

#

And as soon as I said that

#

it updated

lethal root May 21, 2020, 4:32 AM

#

It's always a cache issue 😛

simple bridge May 21, 2020, 6:45 AM

#

Anyone know how you're supposed to get "on/off" values from switches into grafana?

#

I can get numeric values like temperature and energy usage easily, but I can't seem to get it to pick up switch state

surreal crest May 21, 2020, 9:56 AM

#

hi there, I'm a bit confused by the new Internal & external URL handling of 110. i used to have the DUCKdns and NGINX addon running to have my HA locally accessible via http and remotely via https, how is this affected by 110?

#

do i still need NGINX or is it enough to specify the duckDNS adress in the gui as external URL?

chrome falcon May 21, 2020, 1:13 PM

#

I am using monitor addon (https://github.com/Limych/addon-presence-monitor), which runs a bluetooth presence monitoring script. The addon relies on MQTT, I'm using "Mosquitto broker" for it.

#

When I restart Home Assistant, I don't receive any more updates. This github issue (https://github.com/andrewjfreyer/monitor/issues/297) says that I should trigger a restart of the monitor nodes via MQTT when HA restarts

#

How can I restart the nodes?

modern hound May 21, 2020, 1:41 PM

#

Does anyone know if the VSCode addon is running locally on the server or attaching to a "Cloud" version of VSCode?

lethal root May 21, 2020, 2:02 PM

#

locally

#

@modern hound

modern hound May 21, 2020, 2:08 PM

#

@strong bridgeme ta @lethal root

modern hound May 21, 2020, 3:09 PM

#

And now I run slap bang into the Samba Addon not doing anything. I seem to have lost the ability to configure it. You used to do this using the Config section below the top part of the page, this no longer exists though. I'm assuming it is the config that is broken because samba refuses to start and I just cannot find where I need to go to put that right.

sly kindle May 21, 2020, 3:24 PM

#

@modern hound set your gaze to the top center of the addon's page

#

they have been broken out into tabs...info, configuration, logs

modern hound May 21, 2020, 3:27 PM

#

🤣🤣🤣🤣🤣 What a dumb arse I am! I really could not see them for looking! Many thanks @sly kindle Hopefully can fix this now .

pulsar escarp May 21, 2020, 4:51 PM

#

I'm not seeing the "add new repository" option in the add-on store. Anyone else having the same issue?

#

Apparently it's just moved to the top right on the page

rain dragon May 21, 2020, 6:00 PM

#

Anyone with a Verizon router having issues setting up SSL with DuckDNS? I have DuckDNS and the lets encrypt cert, but when I visit my duckdns domain I get directed to my router login page
I have forwarded all appropriate ports I believe

sly kindle May 21, 2020, 6:43 PM

#

@rain dragon what are you forwarding?

rain dragon May 21, 2020, 6:45 PM

#

I got it figured out! thanks

sly kindle May 21, 2020, 6:45 PM

#

sweet

hushed hearth May 21, 2020, 8:27 PM

#

Silly question. I am using Custom Header, and the instructions say "in the options menu of Lovelace" to start configuring it. I cannot find "options", where is this?

wooden stone May 21, 2020, 8:54 PM

#

Hey all, I'm running the PiHole add-on in version 4. Everything works fine, but if PiHole is not running, traffic is not handled anymore by my router (as in the DNS is fully dependant on PiHole and doesn't realize it can simply use the router).
Can anyone think of a way to have the router DNS as a backup to automatically use if PiHole isn't running?

steep zealot May 21, 2020, 9:17 PM

#

How do i automatically log in to Phoscon WebApp (the web ui of the deCONZ) plugin? Is there a setting I missed. I have to manually enter my password every time.

thin ore May 22, 2020, 12:13 AM

#

Hi folks, I hope I am posting in the right place (new user). I am trying to set up mosquito and in the config I keep getting the error "Failed to save addon configuration, [object Object]" any help would be greatly appreciated!

magic mist May 22, 2020, 2:09 AM

#

Anyone on that has any experience with ESPHome?

drifting sentinel May 22, 2020, 2:19 AM

#

Hi i have the ngnix installed, i can authenticate and login but my data fails to load after that on the app on my cell connection or computer on the wan as well. Everything works fine on the LAN but not the wan any help is appreciated

magic mist May 22, 2020, 5:36 AM

#

I solved my issue. Apparently I had to turn on fast_connect in order for the NodeMCU to get and keep an IP from my Unifi APs.

lethal root May 22, 2020, 6:23 AM

#

@wooden stone you can always put two DNS servers in any device I know of

#

@drifting sentinel sounds like a port forward/DNS issue

modern hound May 22, 2020, 10:07 AM

#

Anyone ever experienced the VSCode addin disconnecting after a few moments? I open a file then after 10-15 seconds I get a "Cannot reconnect. Please reload the window.". After this nothing works until I refresh the windows and it does it again. Not a huge issue as I can just use VSCode locally against the Samba share. It would be good to fix though then everything can be done in one place 🙂

modern hound May 22, 2020, 11:09 AM

#

tasmoadmin doesn't like my SSL cert either. Works for Home Assistant but does not seem to be liked by tasmoadmin. it says ""ssl_stapling" ignored, issuer certificate not found for certificate "/ssl/fullchain.pem". My CA does not have any option for stapling anything.

lethal root May 22, 2020, 11:23 AM

#

I prefer the "File Editor" myself, much simpler

#

And what is your CA?

modern hound May 22, 2020, 1:16 PM

#

it is on my OpnSense Firewall. Create all my certificates there. Was just trying vsc 'cos it does syntax highlighting which is useful with YAML

steep zealot May 22, 2020, 2:06 PM

#

@modern hound regarding VSC its a known issue w. no fix, I have the same issue: https://github.com/hassio-addons/addon-vscode/issues/96

jovial acorn May 22, 2020, 2:45 PM

#

Did anyone else lose the configuration options for custom_header in the latest update?

modern hound May 22, 2020, 2:58 PM

#

ta @steep zealot I will swap it out for "file editor" for now. Just thought with me being rusty at YAML it would be good to have something syntax check me 😉

sly kindle May 22, 2020, 3:05 PM

#

@jovial acorn custom header is a custom integratation. not an addon

#

And yes, it needs an update as far as I understand

jovial acorn May 22, 2020, 3:21 PM

#

I apologize. So it's supposed to be in the integrations channel? I looked for custom integrations but it was archived.

sly kindle May 22, 2020, 3:42 PM

#

custom integrations are unsupported integrations that cannot be found here https://www.home-assistant.io/integrations

#

And I'm a little wrong here because custom header is a UI lovelace thing, so #frontend-archived is an appropriate place for that

#

@jovial acorn

jovial acorn May 22, 2020, 3:44 PM

#

Right, thanks!

neon hamlet May 22, 2020, 5:38 PM

#

hi I am trying to add a new add on repositories, I paste the URL in the add link but it does not add it when I press add - I have been away from HA for a while as I was looking after my father as he ended his life so not sure if something has been added to control changes - any help would be great - thanks

cunning wolf May 22, 2020, 5:40 PM

#

You could start by telling us what happens when you click add. Are there any error messages (either on screen or in the logs)?

neon hamlet May 22, 2020, 5:43 PM

#

no error messages see a small circle then nothing

#

I am trying to install Tasmota back up

lethal root May 22, 2020, 7:00 PM

#

Which repository

#

The link, not the name

#

@neon hamlet

wary igloo May 22, 2020, 7:07 PM

#

hi! how do I access the admin HTTP api within the nodeRed Addon? I want to read the number of nodes.

lethal root May 22, 2020, 7:14 PM

#

I imagine there is an admin menu config for the addon, no?

wary igloo May 22, 2020, 7:15 PM

#

I don't know what you mean by that?

lethal root May 22, 2020, 7:15 PM

#

For the addon, what does the config section say about network

wary igloo May 22, 2020, 7:17 PM

#

There are username, password, port, secrets, but that doesn't tell me how to access the API. meaning where do I point the HTTP request node? localhost doesn't work.

lethal root May 22, 2020, 7:19 PM

#

Maybe this is a question better suited for #node-red-archived

wary igloo May 22, 2020, 7:20 PM

#

😅 when I asked that question there, I was directed here.

lethal root May 22, 2020, 7:21 PM

#

Heh.

#

Well I have no idea, let's wait for someone who does

weary stratus May 22, 2020, 8:44 PM

#

Hi, I'm looking to to factory reset Hue bulb using TouchLink for Zigbee2Mqtt, but log says 'Failed to reset'

zigbee2mqtt:info  2020-05-22 21:42:27: MQTT publish: topic 'zigbee2mqtt/bridge/log', payload '{"type":"touchlink","message":"reset_failed","meta":{"status":"failed"}}'```

#

https://www.zigbee2mqtt.io/information/touchlink.html

chrome vault May 23, 2020, 12:48 AM

#

does anyone know how to configure the mosquitto addon? I can't find the documentation

#

this is it as far as I can tell: https://github.com/home-assistant/hassio-addons/blob/master/mosquitto/README.md

#

OH! there's a new documentation tab... got it

#

hmm... this mosquitto broker doesn't seem to work as well as the other one

#

1590195192: Socket error on client <unknown>, disconnecting.
1590195192: New connection from 192.168.1.122 on port 1883.
1590195192: Socket error on client <unknown>, disconnecting.
1590195203: New connection from 192.168.1.123 on port 1883.

#

there don't seem ot be any options to set to change anything.. how is it different the the one Frenck released? Or do I need to back back to that one even though it's deprecated?

#

Yep.. I go back to . Frenck's addon and it works.. The official one doesn't

sly kindle May 23, 2020, 1:05 AM

#

it works for a lot of people

#

and the community one won't be seeing any updates

chrome vault May 23, 2020, 1:05 AM

#

well not for me.. and I can't see what I can change?

sly kindle May 23, 2020, 1:06 AM

#

do you use anonymous?

chrome vault May 23, 2020, 1:06 AM

#

yes.. and that's set to true.. I also have a user, and I've added them

#

ssl: false
certfile: fullchain.pem
keyfile: privkey.pem
broker: true
allow_anonymous: true
mqttusers:
  - username: user
    password: pass
    readonly: true
    topics:
      - '#'

#

that was for the depreceated addon

#

nothing complicated

#

and here's what I tried for the official one

#

logins:
  - username: user
    password: pass
anonymous: true
customize:
  active: false
  folder: mosquitto
certfile: fullchain.pem
keyfile: privkey.pem
require_certificate: false

#

unless I have to remove and re-add the integration?

sly kindle May 23, 2020, 1:44 AM

#

I use the default. So no anon. And no legacy logins. The users in HA itself can be used as credentials by your mqtt devices

#

So I just install the addon, hit start, then go to integrations page, add the mqtt which should be appearing at the top of the page, and then done

weary stratus May 23, 2020, 2:04 AM

#

hey Guy's I played around with previous versions of Home-Assistant and as everyone I love it.
But somehow in the latest version that I installed as a docker container I'm not able to find the "addons" section in the web gui or even where to put an addon folder in the container. Where did you hide it ? 😆

hollow depot May 23, 2020, 5:03 AM

#

[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] done.
[services.d] starting services
[services.d] done.

INFO: Using main config file /data/workdir/config

ERROR: Lock file '/data/workdir/lock' present, aborting.
[cmd] /run.sh exited 1
[cont-finish.d] executing container finish scripts...
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.

#

Can anyone help with this abort on DuckDNS?

exotic hemlock May 23, 2020, 5:10 AM

#

hi all

#

it is about let'sencrypt, sslforfree is no longer free for wildcard cert

#

i am trying to use the official addon LetsEncrypt but having an issue

#

i will be using Google DNS Challenge as i do have a google domain account

#

i got this error Encountered 403 Forbidden with reason "accessNotConfigured"

#

and it asks me to enable "Cloud DNS API" which is a paid service

#

is this suppose to be?

hollow depot May 23, 2020, 5:19 AM

#

When did this all happen?

exotic hemlock May 23, 2020, 5:20 AM

#

u mean sslforfree?

hollow depot May 23, 2020, 5:20 AM

#

Yes

exotic hemlock May 23, 2020, 5:20 AM

#

just few days back

#

u could try to use https://www.sslforfree.com/ to generate a wildcard cert

#

i will force u to register an account and it is a paid service.

lethal root May 23, 2020, 5:48 AM

#

@weary stratus you didn't install supervised, you installed #672217570283094017 with docker

#

Only supervised has addons

exotic hemlock May 23, 2020, 5:48 AM

#

any idea about Cloud DNS API?

#

to use Lets Encrypt addon with Google Domain, i must subscribe this paid service?

lethal root May 23, 2020, 5:50 AM

#

https://certbot-dns-google.readthedocs.io/en/stable/

#

Seems to me like you need to either move to a different domain provider or pay for the cloud dns

#

$0.40 per million queries per month.

#

So $4.80/year?

#

Because I doubt you'll get a million queries

exotic hemlock May 23, 2020, 5:53 AM

#

ya.... for managed zone it is $ 0. 20 price/month

#add-ons-archived

ssl_certificate: /ssl/fullchain.pem

ssl_key: /ssl/privkey.pem

http:

base_url: example.duckdns.org:8123

Posting this in the #node-red-archived channel

INFO: Using main config file /data/workdir/config