#add-ons-archived | Home Assistant | Page 35

plain rune May 5, 2020, 3:53 PM

#

i.e., if the cert you provided can't be used for some reason

tawdry pollen May 5, 2020, 3:54 PM

#

cool thanks, i'll see what i can find

boreal vale May 5, 2020, 5:10 PM

#

@frozen girder Did you check portforwarding?

lethal root May 5, 2020, 5:17 PM

#

@frozen girder did your external address change perhaps?

#

(And not update properly)

sly kindle May 5, 2020, 6:05 PM

#

@frozen girder both of the above

trail isle May 5, 2020, 6:55 PM

#

Can anyone tell me what happened to the add on configurations? I am trying to access the one for Samba but there is nothing presented to edit or save that would then allow me to restart the add on with my credentials.

#

BTW - I just upgraded to a fresh image of HassOS 3.13

lethal root May 5, 2020, 7:02 PM

#

Top of the page

#

There are tabs now

trail isle May 5, 2020, 7:02 PM

#

Is there a reason I'm not getting an add-on configuration to edit and save. Any hint would be greatly appreciated.

lethal root May 5, 2020, 7:03 PM

#

Found em?

frozen girder May 5, 2020, 7:41 PM

#

@frozen girder Did you check portforwarding?
@boreal vale looks fine - forwarding 80 to 80 and 443 to 8123

@frozen girder did your external address change perhaps?
@lethal root name resolution appears to be working fine

Certificate appears to be in date - was renewed today when I forced it

lethal root May 5, 2020, 7:42 PM

#

Are you on windows?

frozen girder May 5, 2020, 7:43 PM

#

Are you on windows?
@lethal root The laptop I'm typing on is Windows. The hassio installation is on Ubuntu. Why do you ask?

lethal root May 5, 2020, 7:44 PM

#

I'm out of ideas, but perhaps ipconfig /flushdns

sly kindle May 5, 2020, 8:17 PM

#

@frozen girder the ports are forwarded but have you confirmed that the local address they are being forwarding to is the same?

frozen girder May 5, 2020, 8:18 PM

#

@frozen girder the ports are forwarded but have you confirmed that the local address they are being forwarding to is the same?
@sly kindle Yes - the internal address (192.168.1.247) has not changed

sly kindle May 5, 2020, 8:20 PM

#

what do the addon logs say when you restart the addon

#

and are you adding :8123 to the end of your duckdns address or leaving it off?

dense spadeBOT May 5, 2020, 8:31 PM

#

@frozen girder posted a code wall, it is moved here --> https://paste.ubuntu.com/p/ZdDWjKSkkz/

sly kindle May 5, 2020, 8:32 PM

#

ok, and your http: config?

frozen girder May 5, 2020, 8:33 PM

#

ok, and your http: config?
@sly kindle
http:
ssl_certificate: /ssl/fullchain.pem
ssl_key: /ssl/privkey.pem
base_url: https://<DOMAIN>.duckdns.org

#

What's odd is that I haven't changed a single thing - it just stopped working !

sly kindle May 5, 2020, 8:33 PM

#

I don't know. Tried rebooting the router?

frozen girder May 5, 2020, 8:33 PM

#

I'ts been bulletproof until today

#

Could do. (Not right now as the other half is on a Zoom call !)

sly kindle May 5, 2020, 8:34 PM

#

@finite skiff that's not an add-on

#

it is a custom (meaning unsupported by HA) integration, so #integrations-archived is what you want. (components is the old term for integrations)

finite skiff May 5, 2020, 8:35 PM

#

Roger that, thank you mate

flint reef May 5, 2020, 10:25 PM

#

Hi, I am trying to get InfluxDB to work with me and I fail horribly. My whole HA instance is on a VM, but this should npot matter, right?
In installed both InfluxDB and Grafana and followed the steps. I have both up an running somehow, but InfluxDB is kind of unresponsive in the admin UI (Chronograf?) and Grafana has an 401 Unauthorized error.

#

I am confused as to why I cannot get a simple query like "SHOW databases" to work.

#

And the log is not really helpful, there are no errors.

tropic shell May 6, 2020, 3:16 AM

#

Hi, Is this the correct forum to ask questions about the Node-Red add-in?

tropic shell May 6, 2020, 3:58 AM

#

I was trying to capture the "mobile_app_notification_action" event on Node-Red for the HA mobile app. When I use the events: all node in node-red I don't get the "origin": "REMOTE", "time_fired": "2020-05-05T14:01:06.626951+00:00", "context": { "id": "ID", "parent_id": null, "user_id": "USERID" } portion of the event...

#

I can see this on the HA under developer tools

#

am I doing something silly not to see this or is this a known issue on Node-Red

#

?

frozen girder May 6, 2020, 6:42 AM

#

I don't know. Tried rebooting the router?
@sly kindle Well that worked! Wonder what was wrong with the router as there were no obvious issues with it?

rocky sandal May 6, 2020, 6:57 AM

#

hi all got an question with duckdns add on. So i got it work and can be access hassio via internet. However there no more local access is there an option to hop back to local ip once it sense my device is inside the network

flint reef May 6, 2020, 7:03 AM

#

Hi, any news on the InfluxDB front? Can someone confirm it is broken on a new installation?

frozen girder May 6, 2020, 7:05 AM

#

hi all got an question with duckdns add on. So i got it work and can be access hassio via internet. However there no more local access is there an option to hop back to local ip once it sense my device is inside the network
@rocky sandal Yes you should still be able to access using your local IP address - e.g. https://192.168.1.247:8123/
However, bear in mind that the certificate will be tied to the duckdns Domain Name - so your browser will through a security exception

rocky sandal May 6, 2020, 7:09 AM

#

thank willidh got in with https .. oh so still need to pass through duckdns.. so if internet is down where SOL..

#

were*

sly kindle May 6, 2020, 7:24 AM

#

@rocky sandal no, just https://local_ip:8123

#

that will work if internet is down

weary stratus May 6, 2020, 7:59 AM

#

Good morning!
I have a question about mqtt, as I am pretty new to all of HA :)
So I am trying to get my weather station with Raspi and weewx to report to my HA.
Seems to get there:
1588751736: New client connected from 192.168.1.3 as weewx_85e97065 (p2, c1, k60, u'mqtt').
1588751736: Client weewx_85e97065 disconnected.

Now the question is: How do I go to visualize something on HA?

flint reef May 6, 2020, 8:21 AM

#

Regarding InfluxDB:
It works, but only without authentification, so it seems there is an error in the docs regarding this part.

rocky sandal May 6, 2020, 9:28 AM

#

anyone got the Google Assistant SDK addon working

#

im suck at getting model_ID part anyone got some pointer

#

no idea where to find that ID number from google project page

covert arch May 6, 2020, 9:38 AM

#

can somebody help me with this?
https://github.com/jeremywillans/ha-rest980-roomba

#

how do I get vacuum.roomba back when I'm supposed to not use the official HA integration for roomba? (109.3)

quasi granite May 6, 2020, 11:41 AM

#

Hi I am new to home assistant app. I have installed the home app in my mac machine, but was not able to see the addon on left panel. Can anyone help me? Is addon hassio?

tropic kite May 6, 2020, 3:02 PM

#

heyhey 🙂

#

anybody uses audio on their hassio? server?

#

@quasi granite your still here?

tropic kite May 6, 2020, 3:25 PM

#

@quasi granite you need to install docker to get the homeassistant expirience, it's a bit of a hassle to get started on a mac. if you can try it on a raspberry pi 😉 if you want more info feel free to ping me.

tepid juniper May 6, 2020, 5:46 PM

#

I have a question about @raven tinsels Spotify Connect Add-on.
I run HomeAssistant Supervised in docker containers on Raspbian Stretch. (I REALLY hope I got this right). The Spotify Add-on must be one of those containers, I think.
Anyway,
This works fine, but after a while (sth between 30m and 2h) of NOT playing anything on the Pi, Spotify seems to drop the device from the list of available devices, the add-on is still displayed as running though. Restarting it fixes it but that can't really be the solution, right? 😟
Is anyone else experiencing this and how could I fix/work around it?

raven tinsel May 6, 2020, 5:50 PM

#

@tepid juniper Authenticate the add-on

#

it will in those cases be reported in to your account

tepid juniper May 6, 2020, 5:50 PM

#

It is, it's logged into my account 🤷‍♂️

safe kettle May 6, 2020, 6:49 PM

#

Sorry, i have one question. My devices are mqtt without login, is ther any way to disable login in mosquitto broker?

sly kindle May 6, 2020, 6:50 PM

#

You can but it's a pain. You're better off just having them use credentials (any existing HA user credentials are fine)

safe kettle May 6, 2020, 6:51 PM

#

i have to reprogram a lot of arduinos, and i lost some of their codes...

#

any where explaining how to be in pain?

flint reef May 6, 2020, 7:02 PM

#

@raven tinsel The InfluxDB add-on seems to have an authentification problem. It does not "work" if installed according to the docs without setting "auth: false" in the add-on config. Or some part about the first time setup is missing from the docs.
I started with HAS in a VM and installed both InflixDB and Grafana, neither the nice UI of Influx nor grafan could connect to the db with auth: true.

sly kindle May 6, 2020, 7:06 PM

#

@safe kettle https://github.com/home-assistant/hassio-addons/blob/master/mosquitto/README.md

#

set anonymous to true

safe kettle May 6, 2020, 7:07 PM

#

yes

#

but they can't send messages

#

because mosquitto login is activated

#

Option: anonymous

Allow anonymous connections. If logins are set, the anonymous user can only read data.

old jewel May 6, 2020, 7:08 PM

#

Has anyone worked on an airplay receiver addon? Any known hurdles I should be aware of before I get to far down the rabbit hole? Seems like their are some docker containers available to use as a starting point.

sly kindle May 6, 2020, 7:12 PM

#

@safe kettle don't set logins?

safe kettle May 6, 2020, 7:13 PM

#

i don't know how to disable logins....

#

it's set by default...

sly kindle May 6, 2020, 7:14 PM

#

https://github.com/home-assistant/hassio-addons/blob/master/mosquitto/README.md#access-control-lists-acls

safe kettle May 6, 2020, 7:47 PM

#

thanks

#

now they cant send messages

#

but nothing appears in devices

sly kindle May 6, 2020, 8:03 PM

#

entities which use discovery show up there. you can enter yours manually in yaml

harsh basin May 6, 2020, 8:06 PM

#

I'm having some trouble with setting up the config topic for discovery with mqtt add-on. Anytime I send it from my arduino or mosquitto_pub and then a state after that, my hassio isn't setting up the entity. e.g. mosquitto_pub -h [broker_ip] -p 1883 -u [USERNAME] -P [PASSWORD] -t "homeassistant/sensor/equinox/config" -m "{'name': 'equinox', 'device_class': 'illuminance', 'state_topic': 'homeassistant/equinox/state'}"

whole path May 6, 2020, 8:18 PM

#

similar issue and question to E + T here, I have been battling with things for several days and now have to ask - with the MQTT discovery, should I still be going into configuration.yaml and describing each of my sonoff switches topics and payloads... happy to do it as currently I have entities but no devices showing, but looking for a quick nod this is the right thing to do..

#

and integration for Mosquitto MQTT addon says this integration has no devices

#

and now reading up I think @sly kindle has just given me the nod that sonoff basics with tasmota are probably not using discovery and I should enter manually in yaml.

sly kindle May 6, 2020, 8:22 PM

#

you enable discovery in tasmota using setoption19 1

harsh basin May 6, 2020, 8:28 PM

#

So using an Adafruit Huzzah board in Arduino, that won't support discovery?

whole path May 6, 2020, 8:53 PM

#

thanks @sly kindle I've found this Enabling

For a Tasmota device to be automatically discovered by Home Assistant you need to enable MQTT discovery with command:

SetOption19 1

#

but haven't found were to set that option yet... will keep looking

whole path May 6, 2020, 9:19 PM

#

aha! found it - could send that option via a MQTT command or easier in my case to open the console on each tasmota sonoff and issue setoption19 1 there. Progress! thanks again @sly kindle 🙂

safe kettle May 6, 2020, 10:24 PM

#

sorry one last think, mqtt is working, device can receive commands, but state is not updating, device is configured like this in config - platform: mqtt
name: "Rele 8"
state_topic: "/CC_CE_1/EST/RELE8"
command_topic: "/CC_CE_1/REC/RELE8"
state_on: "1"
state_off: "0"
payload_on: "1"
payload_off: "0"
qos: 0
retain: false

#

any ideas?

radiant pewter May 6, 2020, 11:31 PM

#

Hi everyone, I'm running Hassio on Ubnutu 18.04 and its flawless, however Im not sure how to add a plugin to the Grafana addon that is not installed by default in the docker image im using. Anyone has an idea how to access the Grafana container to add that plugin? I tried docker exec -i hassioaddons /bin/bash but it tells me it doesnt exist

knotty relic May 7, 2020, 12:11 AM

#

get a list of running docker containers with "docker ps -a"

#

then use that same command you had there and replace hassioaddons with the first few characters of the container ID you want to exec into

dense spadeBOT May 7, 2020, 12:16 AM

#

@knotty relic posted a code wall, it is moved here --> https://paste.ubuntu.com/p/y9hg5dYDkD/

knotty relic May 7, 2020, 12:17 AM

#

'''[17:15:47] INFO: Setup mosquitto configuration
[17:15:47] WARNING: SSL not enabled - No valid certs found!
[17:15:47] INFO: Found local users inside config
[17:15:47] INFO: Initialize Hass.io Add-on services
[17:15:47] INFO: Initialize Home Assistant discovery
[17:15:47] INFO: Start Mosquitto daemon
1588810547: Loading config file /share/mosquitto/acl.conf
1588810547: mosquitto version 1.6.3 starting
1588810547: Config loaded from /etc/mosquitto.conf.
1588810547: Loading plugin: /usr/share/mosquitto/auth-plug.so
1588810547: |-- *** auth-plug: startup
1588810547: ├── Username/password checking enabled.
1588810547: ├── TLS-PSK checking enabled.
1588810547: └── Extended authentication not enabled.
1588810547: Opening ipv4 listen socket on port 1883.
1588810547: Opening ipv6 listen socket on port 1883.
1588810547: Opening websockets listen socket on port 1884.
1588810547: Warning: Mosquitto should not be run as root/administrator.'''

#

Hello, I've been working on getting a secure mqtt setup with TLS encryption but still get "SSL not enabled - No valid certs found!" even though I've placed certs.

#

Keep in mind that these are self-signed certs by a custom CA

#

is this possible?

#

I've placed the certs in both the homeassistant configuration directory and the share directory but they don't seem to get recognized and then the /etc/mosquitto.conf inside the container doesn't reference the certs at all.

#

My config in hassio addon looks like this:

#

'''logins:[]
anonymous: false
customize:
active: true
folder: mosquitto
certfile: server.crt
keyfile: server_key.key
require_certificate: true
cafile: ca.crt'''

#

I followed this guide for the TLS configuration: http://www.steves-internet-guide.com/mosquitto-tls/

sturdy ridge May 7, 2020, 12:47 AM

#

converting from PiHole to AdGuard.... was wondering if there was a way to set up a manual host in AdGuard like I could in PiHole.

#

essentially, wanting to use my public address/domain to load HA.... but route internally. If there's another way.... recommendations appreciated!

#

hosts:

name: ha.mydomain.com
ip: 192.168.100.1
virtual_host: ha.mydomain.com

#

(is how I did it in PiHole config)

tropic shell May 7, 2020, 1:33 AM

#

I was trying to capture the "mobile_app_notification_action" event on Node-Red for the HA mobile app. When I use the events: all node in node-red I don't get the "origin": "REMOTE", "time_fired": "2020-05-05T14:01:06.626951+00:00", "context": { "id": "ID", "parent_id": null, "user_id": "USERID" } portion of the event...

#

Can anyone help me with the above?

weak jackal May 7, 2020, 3:00 AM

#

I'm having an issue where I can't install any add ons and I keep getting a
Failed to install addon, Unknown Error, see logs

#

But none of my logs show anything

sly kindle May 7, 2020, 3:18 AM

#

where is it telling you it failed

#

@weak jackal the supervisor logs are where you should be looking

weak jackal May 7, 2020, 3:22 AM

#

20-05-07 03:22:10 ERROR (SyncWorker_33) [supervisor.docker.interface] Can't install hassioaddons/adguard-amd64:2.3.3 -> 500 Server Error: Internal Server Error ("Get https://registry-1.docker.io/v2/: dial tcp: lookup registry-1.docker.io on [::1]:53: read udp [::1]:49799->[::1]:53: read: connection refused").

vernal kite May 7, 2020, 4:35 AM

#

Quick question about the DuckDNS add-on: When does it renew the cert? Meaning how many remaining days of cert life before it will renew?

paper sorrel May 7, 2020, 5:22 AM

#

[10:47:52] WARNING: SSL not enabled - No valid certs found!
[10:47:52] INFO: No local user available
[10:47:54] INFO: Initialize Hass.io Add-on services
[10:47:54] INFO: Initialize Home Assistant discovery
[10:47:54] INFO: Start Mosquitto daemon
1588828674: Error: Unable to open include_dir '/share/mosquitto'.
1588828674: Error found at /etc/mosquitto.conf:29.```

```2020-05-07 05:19:58 ERROR (MainThread) [homeassistant.components.mqtt] Failed to connect due to exception: [Errno 111] Connection refused
2020-05-07 05:19:58 WARNING (MainThread) [homeassistant.config_entries] Config entry for mqtt not ready yet. Retrying in 5 seconds.
2020-05-07 05:20:05 ERROR (MainThread) [homeassistant.components.mqtt] Failed to connect due to exception: [Errno 111] Connection refused
2020-05-07 05:20:05 WARNING (MainThread) [homeassistant.config_entries] Config entry for mqtt not ready yet. Retrying in 10 seconds.
2``` I keep getting this

#

maybe i fixed it

safe kettle May 7, 2020, 6:54 AM

#

sorry one last think, mqtt is working, device can receive commands, but state is not updating, device is configured like this in config - platform: mqtt
name: "Rele 8"
state_topic: "/CC_CE_1/EST/RELE8"
command_topic: "/CC_CE_1/REC/RELE8"
state_on: "1"
state_off: "0"
payload_on: "1"
payload_off: "0"
qos: 0
retain: false
any ideas?

meager hull May 7, 2020, 6:59 AM

#

Hey guys, is there an addon that lets me run a custom command? I wanna start a socat connection whenever HA boots and I'm looking for the nicest way possible.

vernal kite May 7, 2020, 9:25 AM

#

@meager hull Won't the built in shell command https://www.home-assistant.io/integrations/shell_command/ work?

meager hull May 7, 2020, 9:27 AM

#

@vernal kite That's what I've been trying too but that start the socat command AFTER homeassistant boots and I'd love to have socat run before HA starts.

#

That way, the socket is already there when homeassistant comes online

vernal kite May 7, 2020, 9:32 AM

#

Sorry, you're going to need someone while more knowledge than me then.

loud epoch May 7, 2020, 10:20 AM

#

Have a fresh installtion of Hassio and see that the SSH& WebTerminal Addon is not listed any more in the Addone-Store. But it's already listed on the website. Some idear why it's not shown any more?

safe kettle May 7, 2020, 10:23 AM

#

You need to set advance mdoe

#

in yoour user settings

#

then it will find the addon

loud epoch May 7, 2020, 10:25 AM

#

@safe kettle Thanks a lot... mysterium solved

steep frost May 7, 2020, 10:39 AM

#

I'm looking for some help with the AdGuard Home add-on. It claims to be blocking things but I still get plenty of ads. And if I turn on something like Facebook blocking, I still have no problem going to Facebook. Something isn't right.

I'm on a raspberry pi 4, running HassOS with a Google WiFi router.

Any suggestions?

weary stratus May 7, 2020, 11:04 AM

#

hi, can anyone explain how to creat an SSH key. I'm trying to install shh&terminal Addon

loud epoch May 7, 2020, 11:20 AM

#

@weary stratus on windows oder linux?

weary stratus May 7, 2020, 11:20 AM

#

windows

loud epoch May 7, 2020, 11:20 AM

#

you can find instructions here
https://developers.home-assistant.io/docs/hassio_debugging/#generating-ssh-keys

#

Linux: https://help.github.com/en/github/authenticating-to-github/generating-a-new-ssh-key-and-adding-it-to-the-ssh-agent#platform-mac

For windows without a proper terminal you can use putty to do it

weary stratus May 7, 2020, 11:28 AM

#

okey, it doesn't work

#

my rsp4 dies every time i restart hass. can connect via terminal

#

cant

quasi granite May 7, 2020, 12:13 PM

#

@tropic kite thanks will try to run in raspbery instead, let you know if got any question

strange cove May 7, 2020, 1:33 PM

#

Hi there, I have a little problem with my vscode addon. I try to push changes to my own gitea instance but vscode give me the following error: fatal: unable to access 'https://git.domain.tld/pathto/project/': Failed to connect to git.domain.tld port 443: Connection timed out. Can someone give a hint to troubleshoot this?

weary stratus May 7, 2020, 4:01 PM

#

i am installing spotify now. should i add username and password in the config of spotify add on, or in my config.yaml

#

i solved it

#

but now all my devices dissapeared from my phone. i cant cast anymore, i can only find home assistant

mental elm May 7, 2020, 4:30 PM

#

Hi folks. I'm having issues with accessing my instance through the ssh add-on.

#

whenever I try to connect, I get root@hassio.local: Permission denied (publickey,keyboard-interactive).

#

I sought help here (https://community.home-assistant.io/t/ssh-from-linux-desktop/193331) but alas no luck yet

sly kindle May 7, 2020, 4:33 PM

#

there is no hassio.local

#

it would be homeassistant.local

#

or ip address

mental elm May 7, 2020, 4:44 PM

#

hmm. I tried the ip address and got the same result, permission denied 😦

#

homeassistant.local wasn't found

left flame May 7, 2020, 4:47 PM

#

Is it possible to SSH into a supervised instance? I was never able to get the SSH add-on to connect and I can't connect directly via Putty etiher.

sly kindle May 7, 2020, 4:48 PM

#

@mental elm does it work when using a password instead?

mental elm May 7, 2020, 4:48 PM

#

I was able to do it with putty before

#

but now I am using a linux desktop and can't get it running

sly kindle May 7, 2020, 4:48 PM

#

@left flame you ssh into the ssh addon

mental elm May 7, 2020, 4:48 PM

#

I will try the password

#

do you know how to specify a password with the ssh command on linux?

left flame May 7, 2020, 4:55 PM

#

@left flame you ssh into the ssh addon
OK. What's the point of doing that? Don't people want to modify HA files and such/

#

?

mental elm May 7, 2020, 4:55 PM

#

I think maybe I need to install sshpass

#

@left flame i use it as a means to reboot home assistant, etc.

#

can be nice if the GUI ever goes down, so I can see the logs easily

#

it's not so necessary with new things like safe mode, but I like still having the option

#

I also use it with sftp to download my snapshots to my desktop

left flame May 7, 2020, 4:57 PM

#

But if you SSH into the SSH add-on, that's a different container than HA (assuming we're both running the supervised setup)

#

OR I'm not getting something (which is usually the case)

sly kindle May 7, 2020, 4:58 PM

#

@left flame the custom commands for restarting, stopping, troubleshooting are all there

#

and you have access to the default directories, just not the host

left flame May 7, 2020, 4:58 PM

#

I'm troubleshooting an issue with an integration and the developers asked me to run a python command and give them the dump.

#

python3 -m netdisco dump

#

Ah, there's another SSH add-on. Let me try that one (SSH and Web Terminal)

#

SSH and Web Terminal worked for me. I could SSH in with PuTTY.

distant skiff May 7, 2020, 5:18 PM

#

Can this be done with a docker container?
https://www.home-assistant.io/hassio/installing_third_party_addons/

sly kindle May 7, 2020, 5:19 PM

#

what do you mean

#

you add the repo there

distant skiff May 7, 2020, 5:19 PM

#

I don't see the add-on store with my install running in a container

sly kindle May 7, 2020, 5:20 PM

#

Then you only installed core ha

distant skiff May 7, 2020, 5:20 PM

#

Can I add the extras or is that a different container?

sly kindle May 7, 2020, 5:21 PM

#

you can't add the extras. You have to install the whole ecosystem

#

https://www.home-assistant.io/hassio/installation/

#

You either flash the image which comes with an OS and docker, or you follow the instructions further down for a generic linux install

#

Where you install docker, other packages, and run the install script.

#

https://www.home-assistant.io/hassio/installation/#alternative-install-home-assistant-supervised-on-a-generic-linux-host

weary stratus May 7, 2020, 5:47 PM

#

does anyone know why all my devices dissapeared from my iphone when i installed spotify on home assistant. I can't find my speakers on my phone anymore

mental elm May 7, 2020, 6:13 PM

#

I've tried to ssh with a password and it seems quite challenging. All sorts of variations of sshpass -pveryunsecure ssh -o PreferredAuthentications=keyboard-interactive -o PubkeyAuthentication=no root@hassio.local have failed

#

I keep getting root@hassio.local: Permission denied (publickey,keyboard-interactive). so it looks like it's still using the encryption key

visual falcon May 7, 2020, 6:19 PM

#

Anyone familiar with AppDaemon? I've read about it and it sounds cool. The forum says to look for "AppDaemon 4", but the HassIO "Store" only shows 3.x with version number 4.0.3. The documentation link is going to a depricated github page... is this the old version?

sly kindle May 7, 2020, 6:23 PM

#

📎 unknown.png

visual falcon May 7, 2020, 6:23 PM

#

Oh strange.. had to remove and add the repo

#

thought it would update automatically or on boot

#

even the UPS Tools is listed now, awesome!

#

Been waiting for that one for a long time

sly kindle May 7, 2020, 6:24 PM

#

there's a reload feature that is missing which probably would have refreshed it for you

visual falcon May 7, 2020, 6:26 PM

#

strange, it worked well for all the official addons

weary stratus May 7, 2020, 6:33 PM

#

can any of you experts please help me with my question above

sly kindle May 7, 2020, 6:34 PM

#

@weary stratus no idea. It did not remove my other devices from the list

#

quit the app completely and reopen it?

weary stratus May 7, 2020, 6:34 PM

#

no, still only homeassistan in my spotify app

mental elm May 7, 2020, 7:10 PM

#

try disconnecting and re-connecting to wifi?

#

I have no experience with that integration, but I know that sometimes helps my devices show back up in spotify

weary stratus May 7, 2020, 7:25 PM

#

aa shit

#

my phone wasn't connected to wifi

mental elm May 7, 2020, 8:28 PM

#

hahah there you go!

#

now fix my problem :-p

south wraith May 7, 2020, 9:10 PM

#

Hey everyone o/ I am quite new to HA, and I am trying to install a 3rd party extension (zigbee2mqtt). However - I am not at all seeing the options mentioned in the docs: https://www.home-assistant.io/hassio/installing_third_party_addons/

#

Did anything change that is yet to be documented?

balmy kite May 7, 2020, 10:24 PM

#

Are you on Hass.io or Home Assistant?

south wraith May 7, 2020, 11:33 PM

#

Home Assistant v. 0.109.5

mental elm May 7, 2020, 11:53 PM

#

Does anyone perhaps have any input on my ssh issue? 🙂

raw valley May 8, 2020, 12:55 AM

#

Where can I add new repositories in the latest hass? Under the add-on store I dont have the option

#

(I have "advanced" mode active)

raw valley May 8, 2020, 1:38 AM

#

I've alse logged out and back in to the user

whole dirge May 8, 2020, 1:44 AM

#

I noticed that as well, was unable to find where it has moved to. Possibly removed by accident along with icons?

raw valley May 8, 2020, 1:45 AM

#

Thats what I get for updating to .109.6

#

is there a way to manually addrepos?

sly kindle May 8, 2020, 1:46 AM

#

@mental elm did you remove the key and set a password in the add-on config?

tribal sorrel May 8, 2020, 1:48 AM

#

upper right corner

mental elm May 8, 2020, 1:58 AM

#

@sly kindle oh... I didn't delete the key, just added the password. I'll try that tomorrow, thank you!

raw valley May 8, 2020, 1:58 AM

#

looks like the button is present in the upper right corner

#

but the icon is missing so its invisible

#

😑

sly kindle May 8, 2020, 2:02 AM

#

📎 unknown.png

#

can just see the circle when mouse is hovering over it

#

📎 unknown.png

#

clicking repositories does nothing

livid walrus May 8, 2020, 2:15 AM

#

Hello, someone who can help me with the installation of duckDNS ... I just installed it on an RP3 (3 times) and nothing .... I follow the tutorial at https://www.juanmtech.com/guide-to-home-assistant but can't access

#

I have erased the SD 3 times I have started from scratch, I repeat the steps but nothing works is inaccessible after I change the configuration.yaml
incliding samba, so is a bad configuration...

whole dirge May 8, 2020, 2:23 AM

#

What do you mean “nothing”? Is it missing from the UI?

sly kindle May 8, 2020, 2:24 AM

#

@livid walrus after you change the http: config you can only reach it with https://

livid walrus May 8, 2020, 2:25 AM

#

@sly kindle it's supposed to, but not even samba works

sly kindle May 8, 2020, 2:25 AM

#

samba is a separate addon. You'd have to do something very strange in your configuration.yaml to make all of docker go down

livid walrus May 8, 2020, 2:26 AM

#

@sly kindle I will start from scratch for the fourth time .... 😭

sly kindle May 8, 2020, 2:28 AM

#

there's a better method anyway

livid walrus May 8, 2020, 2:28 AM

#

@sly kindle I even called the IPS provider to check if I had block the port.... 😅

sly kindle May 8, 2020, 2:28 AM

#

😬

#

let me know when you get to the duckdns part

livid walrus May 8, 2020, 2:30 AM

#

@sly kindle which method?....

#

ok, no problem

paper tiger May 8, 2020, 2:58 AM

#

hi all.. any one here work with Room Assistant?

#

im havin a heck of a time getting it to work on a pi Zero W.. its connected to my HASS MQTT but its just either not reading my phone or refuses to send the message to MQTT

sly kindle May 8, 2020, 3:33 AM

#

@paper tiger flashing one now. I had done this a couple months ago and don't remember much

paper tiger May 8, 2020, 3:36 AM

#

its been eating my lunch.. and my dinner.. a few days ago i had it kinda working and was thinking of getting 2 more pi zeros to pepper my apartment with to get some good automations going but.. it pooped...

sly kindle May 8, 2020, 3:36 AM

#

I had it working and did the same. Got some more pi zeros, never got around to flashing them

paper tiger May 8, 2020, 3:38 AM

#

i followed the documentation and tried to rig it to be like a "satalite" detector.. the leader is supposed to be my HASS server.. (running on Ubuntu)

sly kindle May 8, 2020, 3:39 AM

#

@paper tiger that confused me at first. The addon is just a way of making your pi (or whatever) another sensor. I thought it was going to act as a server of some kind

paper tiger May 8, 2020, 3:40 AM

#

well my server is acting as an other sensor and its talking locally to my MQTT "server" in HASS

#

its supposed to be the leader..

#

its detecting my phone just fine.. but the zero.. just aint

livid walrus May 8, 2020, 3:42 AM

#

@sly kindle installing duckDNS now

paper tiger May 8, 2020, 3:43 AM

#

do i need that?

sly kindle May 8, 2020, 3:44 AM

#

do you need what?

paper tiger May 8, 2020, 3:45 AM

#

oh oops efam posted he was installing DuckDNS.. thought it was you

livid walrus May 8, 2020, 3:45 AM

#

😅 sorry

sly kindle May 8, 2020, 3:46 AM

#

@livid walrus you should fill out the addon config, but leave accept terms: false

livid walrus May 8, 2020, 3:47 AM

#

@sly kindle roger that

sly kindle May 8, 2020, 3:48 AM

#

and then you will not be adding any http: config

#

well, maybe base_url later

#

So you'll have duckdns address, but it will not have ssl yet

#

@livid walrus done yet?

livid walrus May 8, 2020, 3:53 AM

#

yea

#

So how do i test it?

sly kindle May 8, 2020, 3:54 AM

#

did you start the addon and did it get the cert files ok?

#

in the logs?

livid walrus May 8, 2020, 3:56 AM

#

think need set accept terms to tru to get tat...the log only say...
[22:50:24] INFO: OK
[THE IP]
NOCHANGE

sly kindle May 8, 2020, 3:56 AM

#

ok good

paper tiger May 8, 2020, 3:56 AM

#

lol no worries @livid walrus

sly kindle May 8, 2020, 3:56 AM

#

now back to the addon store and install nginx proxy manager

paper tiger May 8, 2020, 3:57 AM

#

is efam settin up for remote admin?

sly kindle May 8, 2020, 3:57 AM

#

@paper tiger still installing room assistant

#

setting up for remote access

#

and ssl

livid walrus May 8, 2020, 4:01 AM

#

installation of nginx proxy manager..... done

#

(start ?)

sly kindle May 8, 2020, 4:01 AM

#

ok. start that, give it a minute or so, and then "open web ui"

paper tiger May 8, 2020, 4:03 AM

#

@sly kindle 👍

sly kindle May 8, 2020, 4:10 AM

#

@livid walrus got it open?

#

alternatively, you can enter http://ip_address:81 in a tab

livid walrus May 8, 2020, 4:11 AM

#

nop....i check the log of ngix ... then get the "Oops! Something went wrong."

sly kindle May 8, 2020, 4:12 AM

#

what does it say went wrong?

paper tiger May 8, 2020, 4:12 AM

#

hey @sly kindle? mind if i catch up with you tomorrow? ive got to work tomorrow and my better half is waitin for me to join him..

livid walrus May 8, 2020, 4:12 AM

#

[23:02:01] ERROR: This add-on now requires the MariaDB core add-on 2.0 or newer!
[23:02:01] FATAL: Make sure the MariaDB add-on is installed and running

sly kindle May 8, 2020, 4:12 AM

#

@paper tiger ah no problem.

#

@livid walrus oh right.

#

I keep forgetting about this new requirement

paper tiger May 8, 2020, 4:13 AM

#

thanks for lookin into this for me.. see ya then

livid walrus May 8, 2020, 4:13 AM

#

😅

sly kindle May 8, 2020, 4:13 AM

#

@paper tiger I'll take notes

#

@livid walrus so yeah, install mariadb addon

livid walrus May 8, 2020, 4:21 AM

#

done (installing mariaDB and start again the ngix manager)

#

asked por email and pass 😖

#

...get the user and pass from the logs 😅

#

(loged and changed)

livid walrus May 8, 2020, 4:42 AM

#

@sly kindle still there?

sly kindle May 8, 2020, 4:42 AM

#

yep

livid walrus May 8, 2020, 4:42 AM

#

😅

sly kindle May 8, 2020, 4:43 AM

#

so now you've got it open?

#

save that user login

#

now you need to forward ports on your router

livid walrus May 8, 2020, 4:44 AM

#

done..... btw if you know of a web page for guide ... I don't want to bother you so much ... 😖

#

the router part is done

sly kindle May 8, 2020, 4:44 AM

#

I am the guide

livid walrus May 8, 2020, 4:44 AM

#

😋

sly kindle May 8, 2020, 4:44 AM

#

router part is done? 80 to 80 and 443 to 443?

#

this is slightly different from before with duckdns ssl

livid walrus May 8, 2020, 4:45 AM

#

...mmmm..... 443 to 8123... but...let me fix that 😇

#

yea

#

...TCP only?

sly kindle May 8, 2020, 4:46 AM

#

I do both

#

but TCP only is fine

#

I think

livid walrus May 8, 2020, 4:49 AM

#

80 to 80...and 443 to 443.....done

sly kindle May 8, 2020, 4:50 AM

#

ok so now you want to add a host

livid walrus May 8, 2020, 4:50 AM

#

(proxy host or redirection host) ?

sly kindle May 8, 2020, 4:51 AM

#

proxy

#

under domain names enter yourduck.duckdns.org

#

scheme is http

#

forward hostname/ip is homeassistant.local or your ha ip address

#

forward port is 8123

#

then click on SSL

#

toggle the Force SSL on

#

and your duckdns address should be in there. If it isn't, then enter it

#

Then hit save

#

And wait a little while

#

At some point it should turn green

#

📎 unknown.png

livid walrus May 8, 2020, 5:00 AM

#

(I'm starting that part ... the power went out...lucky me 😩 )

sly kindle May 8, 2020, 5:00 AM

#

mildpanic

livid walrus May 8, 2020, 5:11 AM

#

I get an "internal error" ..... but it seems to end the process

#

[5/8/2020] [12:08:56 AM] [Express ] › ⚠ warning Command failed: /usr/bin/certbot certonly --non-interactive --config "/etc/letsencrypt.ini" --cert-name "npm-3" --agree-tos --email "email-here.com" --preferred-challenges "dns,http" --webroot --domains " "theduckurl.duckdns.org"
Saving debug log to /data/logs/letsencrypt/letsencrypt.log
Plugins selected: Authenticator webroot, Installer None

#

(deleted the email and the duckdns data)

sly kindle May 8, 2020, 5:14 AM

#

you entered an email address for your user, right?

#

If you click on "users" you should see

livid walrus May 8, 2020, 5:15 AM

#

was there

sly kindle May 8, 2020, 5:16 AM

#

oh you're saying you hid it here...nevermind

#

click on ssl certificates. What do you see?

livid walrus May 8, 2020, 5:17 AM

#

😭 status keep in "Unknown"

sly kindle May 8, 2020, 5:18 AM

#

the three dots on the right.

#

choose renew

livid walrus May 8, 2020, 5:19 AM

#

...clicking renew...then a red box showing "Internal Error" 😖

#

[5/8/2020] [12:18:37 AM] [Express ] › ⚠ warning Command failed: /usr/bin/certbot renew --non-interactive --config "/etc/letsencrypt.ini" --cert-name "npm-3" --preferred-challenges "dns,http" --disable-hook-validation

sly kindle May 8, 2020, 5:21 AM

#

was websockets support toggled on?

#

edit the poxy host and toggle it on

livid walrus May 8, 2020, 5:21 AM

#

...nop

#

...ok

sly kindle May 8, 2020, 5:22 AM

#

also use this to test 80 and 443 https://www.portcheckers.com/

livid walrus May 8, 2020, 5:22 AM

#

...status change to "Online"

#

...i try the renew certificate and still getting the error

sly kindle May 8, 2020, 5:23 AM

#

wait a bit for that

#

check the ports while you wait

livid walrus May 8, 2020, 5:25 AM

#

the ports seem closed

#

😤

sly kindle May 8, 2020, 5:25 AM

#

time to check your forwarding

livid walrus May 8, 2020, 5:29 AM

#

wait...i review the proxy host...the ssl part was not set...when i set the ssl certificate go offline and the error on a mouse hover

sly kindle May 8, 2020, 5:29 AM

#

if your ports aren't open none of that will matter

livid walrus May 8, 2020, 5:30 AM

#

true that

#

...calling ISP again 😠

sly kindle May 8, 2020, 5:30 AM

#

you can message me a screen shot of your forwarding

raw valley May 8, 2020, 5:59 AM

#

When I set mosquitto as my broker in my config yaml, the mosquitto logs get spammed with: 1588908674: New connection from 172.30.32.1 on port 1883.
1588908674: Socket error on client <unknown>, disconnecting.

#

Even though I have the user/pass correctly set. Is there some other reason hass would fail to connecT?

sly kindle May 8, 2020, 6:30 AM

#

you set it in yaml?

#

why not use the integration page?

raw valley May 8, 2020, 6:35 AM

#

Theres no option in the integration page for u/p

#

only discovery

sly kindle May 8, 2020, 6:36 AM

#

it uses your HA users

#

you can use the default addon config and change nothing

#

start it, integrate it, go

#

You can have your client devices authenticate with HA user/pass. Either an existing one, or a new one that you create for mqtt

#

or...if you did fill in the "logins:" then it uses that

raw valley May 8, 2020, 6:40 AM

#

So I'm using my existing ha user/pass

#

it seems in the mosquitto logs, clients will get the socket error: "Socket error on client xxx, disconnecting."

#

Then will get a succesful connection when they connect again

sly kindle May 8, 2020, 6:41 AM

#

172.30.32.1 isn't one of your clients

#

it's homeassistant probably

raw valley May 8, 2020, 6:42 AM

#

yeah homeassistant is that, and then other client was my rf bridge

#

same behavior for each

sly kindle May 8, 2020, 6:42 AM

#

if you're using HA users, then you don't fill in "logins:" in the addon config

#

did you do that?

raw valley May 8, 2020, 6:43 AM

#

I've not modified the mosquitto addon config at all.

sly kindle May 8, 2020, 6:43 AM

#

ok

#

so at this point, you have the yaml integration config, and the ui integration?

#

You should get rid of both. Restart HA. Then add the ui integration

#

check the box for discovery, because why not, and then it's going to be about your client devices

raw valley May 8, 2020, 6:46 AM

#

So remove my mqtt: lines in my configuration.yaml, uninstall mosquitto, then reinstall mosquttio, and configure straight from the integrations page

sly kindle May 8, 2020, 6:47 AM

#

you don't need to uninstall mosquitto, but you can if you want

raw valley May 8, 2020, 6:47 AM

#

when i remove my mqtt: lines, will the integration for mosquitto have more options than it does now?

#

as of now it only has the discovery optinos

sly kindle May 8, 2020, 6:48 AM

#

no

#

right

#

are you making use of many options?

raw valley May 8, 2020, 6:48 AM

#

can i share my mqtt lines in my config.yaml?

sly kindle May 8, 2020, 6:49 AM

#

You still have all the options available for manually entered entities which are using the mqtt platform

raw valley May 8, 2020, 6:49 AM

#

mqtt:
broker: core-mosquitto
discovery: true
username: xxx
password: xxx
birth_message:
topic: 'hass/status'
payload: 'online'
will_message:
topic: 'hass/status'
payload: 'offline'

sly kindle May 8, 2020, 6:49 AM

#

You aren't locked in to discoverd devices

#

yeah, birth and will...🤷‍♂️

raw valley May 8, 2020, 6:50 AM

#

is it necessary?

sly kindle May 8, 2020, 6:50 AM

#

if you need those then the yaml config is what you want

#

I don't use em

raw valley May 8, 2020, 6:50 AM

#

whats the use case for them?

sly kindle May 8, 2020, 6:50 AM

#

well if you don't know, I assume you don't need them either

#

lol

raw valley May 8, 2020, 6:51 AM

#

yeah 😝 i saw someone had that in theirs and thought i needed it

sly kindle May 8, 2020, 6:51 AM

#

📎 unknown.png

#

The majority of my mqtt devices are discovered and pretty simple

#

Then there are a handful of manually added things that don't show up there

raw valley May 8, 2020, 6:56 AM

#

Alright I removed the lines and configured via the integrations page

sly kindle May 8, 2020, 6:57 AM

#

ok, and what kind of devices do you have?

#

tasmota?

raw valley May 8, 2020, 6:57 AM

#

yes right now a temperature sensor and working on adding tasmota.

#

Odd.. I had a sensor for "zigbee2mqtt/bridge/state" and now its not available

#

nevermind, full host restart fixed it

sly kindle May 8, 2020, 7:10 AM

#

I have yet to try zigbee2mqtt

weary stratus May 8, 2020, 8:26 AM

#

Good morning all, I can't see the search bar for github add ons after the update, any clues?

silk geode May 8, 2020, 8:27 AM

#

is it just me or did the 'add custom repository' option?

#

*disappear

weary stratus May 8, 2020, 8:27 AM

#

mine too

dark yoke May 8, 2020, 8:28 AM

#

This still there, just hidden due to a icon issue, click the hidden icon in the top right corner

weary stratus May 8, 2020, 8:29 AM

#

oh, ok, the buttons are now showing, only when mouseover you see a grey circle

silk geode May 8, 2020, 8:29 AM

#

yeah found it too

#

thanks!

lime urchin May 8, 2020, 9:44 AM

#

This still there, just hidden due to a icon issue, click the hidden icon in the top right corner
@dark yoke Came here for literally this, thanks

verbal valley May 8, 2020, 10:34 AM

#

Hey, today i installed the new hassio 3.13 and now i have the problem that in the add on page, there is no window for new repository anymor. did anyone know about this problem ?

verbal valley May 8, 2020, 10:54 AM

#

sorry read that is answerd

edgy knoll May 8, 2020, 2:37 PM

#

Has anyone set up the NGINX Proxy Manager to deliver CORS headers? Can't figure out how to set Access-Control-Allow-Origin

crimson bluff May 8, 2020, 3:14 PM

#

SSL

#

Trying to install ssl and web terminal. It installs cleanly on my RPi 4, but when I try to open the terminal, I get 502 bad gateway. Any suggestions? Haas 3.13 (latest).

exotic bramble May 8, 2020, 3:34 PM

#

Hello, your speak french?

sly kindle May 8, 2020, 3:35 PM

#

@crimson bluff you probably just need to wait longer?

crimson bluff May 8, 2020, 3:40 PM

#

When I open ‘terminal’ the url is my RPi with an xxxxxx_ssh after the 8123. I haven’t put anything into my config file.

exotic bramble May 8, 2020, 3:40 PM

#

J'ai trouvé la reponse a mon probleme les reponses précédente.
Merci

#

I found the answer to my problem the previous answers.
Thank you

sly kindle May 8, 2020, 3:43 PM

#

@crimson bluff at minimum you'd need to set a password

crimson bluff May 8, 2020, 3:47 PM

#

I tried adding to my config file, but ssh: and zzh: are flagged as can’t be found....so where/how do I add password?

mental elm May 8, 2020, 8:28 PM

#

Regarding my ssh issue... With a password worked! Which is encouraging. Although I'm still hoping to figure out the rsa key

gritty hornet May 8, 2020, 8:29 PM

#

Can anyone help with DuckDns setup, I have it all setup and think my issue is occuring with the port forwarding, I have Hassio on a VM using bridged adapter and have the IP adress of the VM, its static but when I do a port forward the duck dns is going towards something else like ''deconz'' or google wifi landing page and not hassio

mental elm May 8, 2020, 9:20 PM

#

What happens if you go to your duckdns.org:8123

#

?

gritty hornet May 8, 2020, 9:31 PM

#

?
@mental elm nothing, the site works but its going to the phoscon deconz app instead of home assistant

#

Phoscon is using same IP as the server, Home assistant using seperate IP in the virtual machine, Bridged adapter

mental elm May 8, 2020, 9:34 PM

#

Sorry, I can't help. It was just a hunch 😕

sly kindle May 8, 2020, 9:35 PM

#

@gritty hornet they should all be using the same ip as the host vm

#

what ports did you forward?

gritty hornet May 8, 2020, 9:36 PM

#

so google wifi, set the vm ip to forward 8123 to 8123

#

although think this is the one that actually made it work but made it to deconz

#

server ip not the vm with hassos 80 to 80

sly kindle May 8, 2020, 9:39 PM

#

if you are forwarding 8123 to 8123 then you have to use yourduck.duckdns.org:8123

#

if you are forwarding 443 to 8123, then you use simply yourduck.duckdns.org

#

(https:// for either of these)

gritty hornet May 8, 2020, 9:41 PM

#

for second is 443 internal?

sly kindle May 8, 2020, 9:41 PM

#

no

#

443 external to 8123 internal for your HA ip address

gritty hornet May 8, 2020, 9:45 PM

#

Okay TCP?

#

ERR_SSL_PROTOCOL_ERROR ON data, on network it goes to google wifi landing page, this is with the only portwarding set on the ip of hassos VM with 443 external 8123 internal as TCP

#

Could it be problem with the config side?

#

ill get what I've put

#

https://pastebin.com/pteyBFM1

obtuse ginkgo May 8, 2020, 11:19 PM

#

Is there any centralized way to manage addon updates instead of having to click on every single one to see if there is an update?

sly kindle May 8, 2020, 11:30 PM

#

@obtuse ginkgo you can see which ones need an update by the thin color indicator

#

but I think it should be more pronounced

obtuse ginkgo May 8, 2020, 11:30 PM

#

yeah I never noticed it

#

will keep my eyes peeled

sly kindle May 8, 2020, 11:31 PM

#

📎 unknown.png

obtuse ginkgo May 8, 2020, 11:31 PM

#

probably should be a thicker line or something

sly kindle May 8, 2020, 11:31 PM

#

one addon needs an update here.

obtuse ginkgo May 8, 2020, 11:31 PM

#

yeah I Never noticed that

sly kindle May 8, 2020, 11:31 PM

#

can you find it?

obtuse ginkgo May 8, 2020, 11:31 PM

#

yeah

#

when did they start doing that?

sly kindle May 8, 2020, 11:32 PM

#

it's been a while now. Whenever the cards got their icons instead of puzzle peices

obtuse ginkgo May 8, 2020, 11:32 PM

#

ah

#

I dunno then

sly kindle May 8, 2020, 11:33 PM

#

I'm sure it will change

#

at some point

obtuse ginkgo May 8, 2020, 11:33 PM

#

yeah I know to look out for it now

spark heron May 9, 2020, 12:20 AM

#

How does pi-hole add on compare to regular pihole

sly kindle May 9, 2020, 2:48 AM

#

@spark heron the pihole addon is pihole...in a container. But the community repo pihole addon is also deprecated meaning it will no longer be maintained.

#

As these things are, anyone is free to give it a go.

spark heron May 9, 2020, 5:11 AM

#

@sly kindle thinks, so they are both the same thing?

sly kindle May 9, 2020, 5:12 AM

#

yes. but for most of those imports you need to reboot the whole thing anyway

spark heron May 9, 2020, 5:15 AM

#

Ah that's cool, just wanted pihole set up for sons ipad... since I'm new to whole home assistant stuff.. gives me a purpose to set it all up

#

All I've got on my home assistant is.. tv remote haha

sly kindle May 9, 2020, 5:16 AM

#

the pihole addon is deprecated

#

but the adguard addon is a nice substitute.

lunar oxide May 9, 2020, 5:26 AM

#

Mosquitto broker: Failed to install addon, Unknown Error, see logs. nothing obviuous about mosquitto in the developer UI logs

#

not sure if there are other logs to look at...

sly kindle May 9, 2020, 5:27 AM

#

the dev tools logs is for Home Assistant

lunar oxide May 9, 2020, 5:27 AM

#

Logger: homeassistant.core
Source: components/cloud/account_link.py:76

sly kindle May 9, 2020, 5:27 AM

#

You want the supervisor logs

#

when an addon doesn't install or start, etc...check the supervisor logs

lunar oxide May 9, 2020, 5:28 AM

#

maybe an auth/socket/connector error, but it seems like its for cloud, not mqtt

#

doh!

#

thanks..

spark heron May 9, 2020, 5:43 AM

#

@sly kindle for me it sounds like i should just install Pi Hole on my spare Pi Zero W

#

and leave my Pi 3 for Hassio stuff only

sly kindle May 9, 2020, 5:44 AM

#

I had pihole, and then adguard as addons. I eventually moved adguard off to another device. Having Home Assistant tied with network roles is not fun.

#

But adguard still has a better integration with HA, and it doesn't matter if you are using the addon or have it somewhere else.

#

📎 unknown.png

spark heron May 9, 2020, 7:19 AM

#

Hmm does look nice,
So I've got little pi zero that's gathering dust and got 6 year old that looks those stupid game ads ... on tablets so wanna hide them haha

#

So ill add pihole to pi zero..
And ad guard to hassio?

lethal root May 9, 2020, 7:38 AM

#

That's a bit redundant?

#

You want a DNS blocker and.... a DNS blocker?

spark heron May 9, 2020, 7:40 AM

#

Haha

#

So they're pretty much exact same, right

#

I'll stick with pihole for now to test on ipad

#

Son just plays games.. see stupid ad on game .. downloads it 😩 😩

#

Plus all pi zero is doing atm is displays how long left of work....

lethal root May 9, 2020, 8:28 AM

#

This add-on is not available on your system.

#

But I have amd64? D:

#

At least I thought I did

#

arch x86_64

#

Do I need to enable some kind of dev flag for the zwave addon?

dark yoke May 9, 2020, 8:38 AM

#

yes, it require dev builds of HA, you should only do that if you really know what you are doing

lethal root May 9, 2020, 8:43 AM

#

Alright sure, but it is visible in the non-dev build which is kind of confusing

dark yoke May 9, 2020, 8:45 AM

#

it's visible sure, but as you stated it's marked as "This add-on is not available on your system."

vernal kite May 9, 2020, 9:35 AM

#

Quick question about the DuckDNS add-on: When does it renew the cert? Meaning how many remaining days of cert life before it will renew?

Still looking for an answer to this... Anybody know? Currently my SSL cert is valid for another 21 days & I'd really like to know when I should expect the DuckDNS addon to renew the cert. (While it seems like it works fine most of the time, twice now the CERT has failed to renew for whatever reason & I didn't discover it until the cert expired which is obviously annoying & can be a hassle for family. I'd like to set up an alert that notifies me when the remaining days of cert validity drops below the expected renewal period... but to do that I obviously need to know what the expected renewal period is... Anybody know?)

vernal kite May 9, 2020, 9:58 AM

#

Ok, an update: It looks like it should renew the cert when the expiration is less than 30 days away... This is based on the fact that I just restarted the DuckDNS addon & then checked it's log & saw the following:

 + Valid till Jul 29 23:50:26 2020 GMT Certificate will not expire
(Longer than 30 days). Skipping renew!```
(I didn't notice that previously because the IP address update checking that takes place every 5 min seems to push the cert expiration check out of the log history pretty fast.)

#

But this of course actually means there's a problem... Despite what the quoted log message says, the cert that's actually in use by the HA web interface expires at the end of May, not July 29th...

lethal root May 9, 2020, 10:01 AM

#

@vernal kite restart HA so it uses the new cert

vernal kite May 9, 2020, 10:02 AM

#

@lethal root are you saying you HAVE to reboot HA in order for new Certs to be used?!

lethal root May 9, 2020, 10:02 AM

#

I'm saying that fixed the problem for the previous user that had this

vernal kite May 9, 2020, 10:03 AM

#

Rebooting now to see what happens...

#

So after rebooting it did start using the newer cert... Which is sort of nice I guess... Thanks @lethal root

#

But that's really a bit disconcerting.... seems almost like a bug...

#

Should I file a bug report on that? I hope it's not intended behavior... if so, at the very least there should be a persistent notification for admins when they log in telling them a new cert is available & the system needs to be rebooted to apply the new cert before [expiration date]

lethal root May 9, 2020, 10:12 AM

#

@dark yoke do you have any ideaon how the LE part of DDNS reloads the new cert?

dark yoke May 9, 2020, 10:12 AM

#

NO!

lethal root May 9, 2020, 10:13 AM

#

I guess he doesn't.

vernal kite May 9, 2020, 10:13 AM

#

Haha. Ok. Any ideas who else I should mention this to? Is there someone specific who's responsible for the official addons?

boreal vale May 9, 2020, 10:14 AM

#

Samba addon doesn't start. Log says: 'addgroup: illegal character with code 64 at position 17' - no clue what that means. HOw can i fix it?

lethal root May 9, 2020, 10:14 AM

#

Found a reply from Frenck saying you always need to restart the service using the cert before it sees the new cert

#

So I guess that's intended behaviour

#

Or at least expected

vernal kite May 9, 2020, 10:15 AM

#

Which service? Restarting DuckDNS does NOT apply the new cert.

lethal root May 9, 2020, 10:15 AM

#

Do you have LE as a seperate addon?

vernal kite May 9, 2020, 10:15 AM

#

And there's definitely not mention of it in the addon documentation that I found!

#

Nope

#

The DuckDNS addon handles the LE renewal automatically by itself.

#

To quote the DuckDNS Addon readme:

Duck DNS is a free service that points a DNS (sub-domains of duckdns.org) to an IP of your choice. This add-on includes support for Let’s Encrypt and automatically creates and renews your certificates.

lethal root May 9, 2020, 10:19 AM

#

I agree, but it seems that for now a restart will be needed to keep it working. Do you update HA on a regular basis?

#

@boreal vale do you have any funky names in your config?

vernal kite May 9, 2020, 10:22 AM

#

I agree, but it seems that for now a restart will be needed to keep it working.
@lethal root I realize you're not the developer but seems like at the very least that should be mentioned in the documentation, don't you think?

#

I do update regularly. But often it ends up being every other version. For example this weekend I'll be upgrading from 0.107

lethal root May 9, 2020, 10:25 AM

#

I do all the minor versions too and I'm guessing the devs do it more often than that so they probably don't notice it that much

vernal kite May 9, 2020, 10:28 AM

#

Yeah, I'm guessing that's why my cert has only expired on me twice in the last 2 years. Historically I've probably rebooted it once a month for either updates or config tweaking. But now that I'm 2 years in, I'm not needing to make changes that often.

#

Really seems like something that should at least be noted in the documentation! Any suggestions on the best way (or place) to raise awareness of the issue with the dev team since like you said they will probably never run into this themselves.

#

Is the hassio-addons github page https://github.com/home-assistant/hassio-addons the right place for that??

lethal root May 9, 2020, 10:32 AM

#

If there is a place it's either there or here

#

But I don't like to poke the devs, they get poked a lot otherwise. :3

boreal vale May 9, 2020, 10:41 AM

#

I agree, but it seems that for now a restart will be needed to keep it working. Do you update HA on a regular basis?
@lethal root Thanks, i figured it out... @ in username is not smart 🙂 Yes always updated to the last version. It's working now, thanks though!

whole dirge May 9, 2020, 10:50 AM

#

I actually find it odd that a new key requires a reboot, not at all what I had expected.

vernal kite May 9, 2020, 10:52 AM

#

@whole dirge Definitely not what I expected!! But it clearly seems to be the case which is why I'm really surprised it's not at least mentioned in the documentation somewhere. I'd be willing to bet it's the source of many people's problem with expired certs!

#

If a reboot really is required it would be even nicer if the addon created a notification when you login so you know you need to reboot before [cert expiration date]

whole dirge May 9, 2020, 10:53 AM

#

Technically speaking, I believe most services like nginx and hassio require a restart of the service to serve up the new cert, but those tend to be sub second lapses.

#

You could automate that, technically speaking.

#

Not ideal though, I admit

vernal kite May 9, 2020, 10:54 AM

#

Sure but I would have expected the addon to do that automation

whole dirge May 9, 2020, 10:54 AM

#

Yeah, I realized right after I said it. ;P

vernal kite May 9, 2020, 10:54 AM

#

haha yea

whole dirge May 9, 2020, 10:54 AM

#

And if you were going that far, you could just automate the reboot.

vernal kite May 9, 2020, 10:55 AM

#

Strange part is I found a comment from frenck that seems to suggest he's aware that's a requirement which makes me even more surprised it's not at least mentioned in the documentation.

whole dirge May 9, 2020, 10:57 AM

#

Honestly, that’s something I’d find fun to write in. But I can’t even get the LE plugin running on my pi from local repo so... 🤷🏻‍♂️

#

But yeah, it’s weird it’s not mentioned.

#

Write in, meaning coding it. Not changing the docs.

#

You could always make the edit an PR it?

#

Of the docs I mean.

vernal kite May 9, 2020, 10:58 AM

#

Automatically restarting the webserver after the cert is renewed probably isn't a good idea universally as it will cause a momentary service interruption if anyone is logged in, and automatically rebooting should definitely not happen as Pis can take minutes to reboot but IF they could post a notification in the GUI saying a reboot is needed that would be nice.

whole dirge May 9, 2020, 10:59 AM

#

Yeah, I realize. I didn’t mean the add on should handle the reboot, that would be horrible.

vernal kite May 9, 2020, 10:59 AM

#

haha agreed

whole dirge May 9, 2020, 11:00 AM

#

If the web service itself could be restarted though, I’d make an argument that scheduling the restart of the service would be relatively safe.

vernal kite May 9, 2020, 11:00 AM

#

I'm actually in the middle of opening an issue detailing the issue as I'm still not 100% sure the devs are actually fully aware of the issue since as Mraedis pointed out, the devs are definitely rebooting so often they'd never experience this.

whole dirge May 9, 2020, 11:01 AM

#

If the user so wishes.

vernal kite May 9, 2020, 11:03 AM

#

Yes, if just restarting the web service is enough to pick up the new cert (which I would assume is enough) then it would be great to have an option in the DuckDNS config that allows you to specify a time of day the web service should be restarted after a new cert has been acquired, if you'd like it to happen automatically.

#

That way you could schedule the restart for 4am or some other time when it's very unlikely anyone will be logged in.

whole dirge May 9, 2020, 11:03 AM

#

Agreed

narrow elm May 9, 2020, 11:24 AM

#

Hey Folks! I'm having some trouble calling ADB service to command my TV via a card. It works if I call it as a service from developer tools, but it doesn't do anything from the card. Could someone take a look please?
entity: media_player.android_tv
icon: 'mdi:youtube-tv'
tap_action:
service: androidtv.adb_command
data:
entity_id: media_player.android_tv
command: >-
am start -a android.intent.action.MAIN -c
android.intent.category.LEANBACK_LAUNCHER -n
com.google.android.youtube.tv/com.google.android.apps.youtube.tv.activity.ShellActivity
type: 'custom:button-card'

vernal kite May 9, 2020, 12:01 PM

#

@whole dirge Here's the github issue in case you want to add your support to it!
https://github.com/home-assistant/hassio-addons/issues/1280

chrome falcon May 9, 2020, 12:34 PM

#

I recently changed from Pi-Hole to AdGuard Home. Does anybody know a guide, that would go through AdGuard's settings and recommend values for them?

patent robin May 9, 2020, 12:48 PM

#

Besides the default I was just check some filters to on

gritty hornet May 9, 2020, 2:38 PM

#

Hi all, I got duckdns setup to access my pi, is it probs a good idea for security to put a long and complicated url for duckdns?

shut compass May 9, 2020, 3:08 PM

#

hi guys, im getting "read-only filesystem" while trying to create a volume via portainer

#

had to use

    volumes:
      - /mnt/data/docker/volumes/heimdall:/config

mental elm May 9, 2020, 4:10 PM

#

Hi folks! I'm still toiling (sporadically 😆) on my ssh issue.

#

I ran the ssh command with verbose output, which I saved here. https://hastebin.com/fupilatotu.nginx

#

Is anyone willing and able to take a look at it and see if they can recommend next steps?

lethal root May 9, 2020, 4:33 PM

#

Do you have a publickey installed on the system?

dark yoke May 9, 2020, 7:13 PM

#

What's the "best" snapshot add-on?

sly kindle May 9, 2020, 7:14 PM

#

https://github.com/sabeechen/hassio-google-drive-backup

#

not the best for anti-google folks, but best in terms of features and such

#

Has its own UI

waxen jasper May 9, 2020, 7:15 PM

#

question about getting addons - how do i do that with no supervisor button?

sly kindle May 9, 2020, 7:15 PM

#

Actually, I don't know now if I am answering your question correctly @dark yoke

#

@waxen jasper A supervised install is how addons are possible

dark yoke May 9, 2020, 7:16 PM

#

I'm all inn Google, so that's fine by me 😅

#

Thanks

waxen jasper May 9, 2020, 7:17 PM

#

can i convert my current install to a supervised one? It is running as a vm on ubuntu (I think it is a vm)

#

actually - I think for now ill stick to normal - thanks!

sly kindle May 9, 2020, 7:18 PM

#

heh

lethal root May 9, 2020, 7:23 PM

#

I downloaded that, clicked install, and realized I probably don't have the GB I need 😄

sly kindle May 9, 2020, 7:24 PM

#

what do you mean? in google drive?

lethal root May 9, 2020, 7:24 PM

#

yeah, checking my alt accounts

#

14.9/15GB free, well hello.

dark yoke May 9, 2020, 7:25 PM

#

oooh, this is nice!

📎 unknown.png

sly kindle May 9, 2020, 7:25 PM

#

I made an alt account at some point just for HA because I was using the google maps integration...and some other google related thing...can't remember what...but I ended up not using that integration

#

Yeah the generational backups are sweet

#

Just going through the readme you can see how much thought sabeechen put into it

dark yoke May 9, 2020, 7:27 PM

#

Yeah! this is a really nice one

lethal root May 9, 2020, 7:27 PM

#

Indeed it is

#

Thanks Cogneato

#

And Sabeechen ofc

sly kindle May 9, 2020, 7:27 PM

#

no it is all meeeee

shut compass May 9, 2020, 7:47 PM

#

guys I need help, for nearly a year ive been using duckdns addon with lets encrypt and it worked super smooth

#

today I decided to run portainer to be able to deploy few more containers but I want to access them from outside so I added the nginx proxy manager

#

now.. I dont know what should I do in order to move to nginx proxy manager, do I need to uninstall duck dns addon and remove the below from the configuration.yaml

   base_url: https://<removed>.duckdns.org:8123```

#

or just simply run nginx proxy manager? im so lost here

sly kindle May 9, 2020, 7:51 PM

#

Are you still planning to use the duckdns address?

shut compass May 9, 2020, 7:51 PM

#

yes

sly kindle May 9, 2020, 7:51 PM

#

If so you don't want to uninstall the addon

#

But you would want to set "accept terms:" to false, and then restart it

#

And then you would want to remove the ssl_ lines from under http: like you have above, but you can keep the base_url: yourduck.duckdns.org

#

Then you would restart HA, and it would be back to a non ssl state.

#

Then when you set up niginx proxy manager, you will get ssl back.

shut compass May 9, 2020, 7:54 PM

#

should I leave base_url: as the one above? including https:// and the port?

sly kindle May 9, 2020, 7:55 PM

#

you can remove the port

shut compass May 9, 2020, 7:56 PM

#

ok restarting it now, in the meantime should I add my domain via nginx proxy manager as if it was a new one?

#

I mean request new ssl cert and all?

sly kindle May 9, 2020, 7:56 PM

#

yep

#

but you want to change your port forwarding settings first

#

external 80 to internal 80 and same with 443 to 443

shut compass May 9, 2020, 7:57 PM

#

let me check them because I think I ahd that before as it was working fine with duckdns

sly kindle May 9, 2020, 7:57 PM

#

you probably had 8123 to 8123 or 443 to 8123

shut compass May 9, 2020, 7:57 PM

#

you are right

sly kindle May 9, 2020, 7:58 PM

#

so you can get rid of the 8123 to 8123, as NPM will handle that

shut compass May 9, 2020, 7:58 PM

#

ok updating firewall now

sly kindle May 9, 2020, 7:58 PM

#

and 443 to 8123 becomes 443 to 443

shut compass May 9, 2020, 7:59 PM

#

good and who will handle the duckdns refresh now? the addon?

sly kindle May 9, 2020, 7:59 PM

#

the cert renewal will be handled by NPM

shut compass May 9, 2020, 8:00 PM

#

and the ip change? because I dont see NPM asking me for duckdns api code

sly kindle May 9, 2020, 8:00 PM

#

duckdns handles that

#

duckdns addon still tracks your IP address and lets you use the domain name you chose

#

it just doesn't handle ssl anymore

shut compass May 9, 2020, 8:01 PM

#

oh right thats why I can add more than one domain to the addon

sly kindle May 9, 2020, 8:01 PM

#

right. Duckdns allows you like 5 or something subdomains

#

I think

#

so you can have plex.yourduck.duckdns.org

#

or so on

dark yoke May 9, 2020, 8:02 PM

#

What? They limit now? 😲

shut compass May 9, 2020, 8:02 PM

#

right so HA is back on but npn sees it as offline

sly kindle May 9, 2020, 8:02 PM

#

Maybe it is unlimited? I haven't checked

shut compass May 9, 2020, 8:03 PM

#

I can now access HA via 192.168.0.102... etc but not from https

dark yoke May 9, 2020, 8:03 PM

#

Was unlimited when I used it, but that is many years ago

sly kindle May 9, 2020, 8:03 PM

#

@shut compass you set the port forwarding?

shut compass May 9, 2020, 8:04 PM

#

yes, sec to check logs and so on

#

yeah on the firewall I see packets hitting the rule

sly kindle May 9, 2020, 8:04 PM

#

basically do what this video does. https://github.com/hassio-addons/addon-nginx-proxy-manager/blob/master/images/screenshot.gif

#

make sure you toggle on websocket support

shut compass May 9, 2020, 8:06 PM

#

yeah I missed that one, but still not working let me double check my steps first

sly kindle May 9, 2020, 8:06 PM

#

you can use your local ip address instead of "homeassistant" too

#

192.168.0.102

shut compass May 9, 2020, 8:07 PM

#

good got it online without https

#

thats something

sly kindle May 9, 2020, 8:08 PM

#

ok now the next step is to get certs for it. the 2nd part of that gif

shut compass May 9, 2020, 8:08 PM

#

yeah it flips to offline right away

#

its weird because both sources I have change to offline when I add the https part

#

and in the firewall packets increase when I try to request the address

#

The site at https://<removed>.duckdns.org/lovelace has experienced a network protocol violation that cannot be repaired.

Thats the error from firefox

#

checking npm logs now

#

extremely weird, imma restart npm

sly kindle May 9, 2020, 8:13 PM

#

clear the browser cache

#

?

#

I think that's a firefox thing

shut compass May 9, 2020, 8:16 PM

#

the error changed now

#

oh I see some errors on the logs

#

error 444

#

https://imgur.com/a/MIAG0hZ

#

maybe because I was trying to get an ssl cert for a domain that already has it?

sly kindle May 9, 2020, 8:19 PM

#

are you using the ssl tab? Also don't spam for requests or you'll get rate limited by LE

shut compass May 9, 2020, 8:20 PM

#

yeah I used the tab and assigned the same cert I was using the first time before I came here asking for help

#

in the past I have been limited by LE so im not making that mistake again xD

sly kindle May 9, 2020, 8:20 PM

#

you assigned it?

#

don't do that. let npm get it

shut compass May 9, 2020, 8:21 PM

#

yes, instead of request a new ssl cert again, I just selected the one that was generated before

sly kindle May 9, 2020, 8:21 PM

#

nah. forget that one

shut compass May 9, 2020, 8:21 PM

#

so, should I request a second ssl cert then?

sly kindle May 9, 2020, 8:21 PM

#

yeah

#

using npm

#

you set "accept_terms:" to false in the duckdns addon, right?

shut compass May 9, 2020, 8:22 PM

#

yes

#

https://imgur.com/mwMwjPn

#

see red ones I generated them while accept_terms was true before coming here for help

#

so maybe thats the problem?

sly kindle May 9, 2020, 8:24 PM

#

ah. yeah you don't want to do that

shut compass May 9, 2020, 8:24 PM

#

ok lets ask for a new cert

dark yoke May 9, 2020, 8:24 PM

#

Those are failed attempts, most likely the port is not forwarded correctly (80)

shut compass May 9, 2020, 8:25 PM

#

oh right the date is in the past

sly kindle May 9, 2020, 8:25 PM

#

you need 80 to 80

shut compass May 9, 2020, 8:26 PM

#

yeah that was it, I didnt realize these were expired

#

I tought they were successful because it allowed me to select them

#

new cert and it is now online

mental elm May 9, 2020, 8:26 PM

#

@lethal root yes, I put it into the add on configuration.

shut compass May 9, 2020, 8:26 PM

#

awesome, now all I get is a 502 from nginx but at least we are on https now

#

this is fucked now I cant access HA fia 192.168... and via https I get 502 bad gateway lol

#

same 502 without https btw, so this seems like an issue with HA innit?

#

ok im totally fucked, HA not reachable via 192.168 nor https.. is there anything else I can do to get access to it again?

sly kindle May 9, 2020, 8:44 PM

#

slow down

#

the local ip doesn't use https

shut compass May 9, 2020, 8:45 PM

#

yeah we agree on that

sly kindle May 9, 2020, 8:45 PM

#

but you still need to add :8123 to the end

shut compass May 9, 2020, 8:46 PM

#

yeah I know that too, remember it was working fine before

sly kindle May 9, 2020, 8:46 PM

#

if you can't reach it locally then something else is wrong

shut compass May 9, 2020, 8:46 PM

#

maybe a hard reboot will do it, i jsut wanted to know if there is anything else to test before I go downstairs to reboot the thing

#

in other words, should I be able to reach it via 192.168.0.102:8123?

sly kindle May 9, 2020, 8:47 PM

#

yes

shut compass May 9, 2020, 8:47 PM

#

ok then hard reboot it is

#

brb

sly kindle May 9, 2020, 8:47 PM

#

what does your http: config look like?

shut compass May 9, 2020, 8:47 PM

#

http:
   base_url: https://<removed>.duckdns.org

#

ok HA is back up on LAN, but 502 is still there.. this is better than what was happening before

#

https://imgur.com/a/6va9zfj

#

should I mention im on pi3b? just in case

#

this the log I see when I try to go to my address

sly kindle May 9, 2020, 8:55 PM

#

is it 192.168.0.102 or 101?

dark yoke May 9, 2020, 8:56 PM

#

502 is that your proxy config is wrong

#

Make sure you set it to http in the config

#

For npm

shut compass May 9, 2020, 8:56 PM

#

its .101 I know I mentioned 102 here but it is 101

sly kindle May 9, 2020, 8:56 PM

#

can you share a pic of your settings?

dark yoke May 9, 2020, 8:56 PM

#

And enable websockets

shut compass May 9, 2020, 8:56 PM

#

Ive done it all for .101 and got the other apps from docker running fine, only HA is giving this 502

sly kindle May 9, 2020, 8:57 PM

#

the proxy host settings for HA

shut compass May 9, 2020, 8:58 PM

#

https://imgur.com/CPNVOng

#

https://imgur.com/tmjDplU

#

and it shows as online on NPM

dark yoke May 9, 2020, 8:59 PM

#

Change the scheme to http

#

https://discordapp.com/channels/330944238910963714/672220642099200000/708784455598473276

shut compass May 9, 2020, 9:00 PM

#

what does scheme refers to? I need to wiki this and understand it because this actually fixed it

#

but for the other container leaving it as https worked too

dark yoke May 9, 2020, 9:01 PM

#

how the proxy should send the request to the internal server

#

many apps, responds to (does not care) if you use http/https, HA does

shut compass May 9, 2020, 9:02 PM

#

so NPM talks to HA via http, and NPM talks to me on https

dark yoke May 9, 2020, 9:02 PM

#

You <--> HTTPS <--> NPM <--> HTTP <--> HA

shut compass May 9, 2020, 9:02 PM

#

awesome

#

I dont how to thank you guys

sly kindle May 9, 2020, 9:03 PM

#

@shut compass I set up a proxy for ombi recently and couldn't get it to work. Then I realized I had to disable websockets for that.

shut compass May 9, 2020, 9:03 PM

#

here, 🍪 and 🍺

#

yeah now that I got this up and running I can see myself adding a host for every app I have

#

now I know I need to toggle it all in case it doesnt work xD

dark yoke May 9, 2020, 9:05 PM

#

Just know that every host you add, will be accessable to anyone that probes your domain

shut compass May 9, 2020, 9:06 PM

#

yes, I see I can add username/pass to it too

#

but my lastpass doesnt hook the popup

#

this might force me to have shitty passwords

whole dirge May 10, 2020, 6:00 AM

#

@dark yoke You can technically work around that to an extent. If you point a wildcard to the box, you’ll have some obscurity. Sprinkle in a proxy that denies all but a handful of sub domains, and requires https with no bounce back, and you’ll have a slightly better time.

fresh onyx May 10, 2020, 8:07 AM

#

hey all, any tips on accessing Core via SSH when using nabu casa and outside the network? I used to use port forwarding but is there a way to use my nabu casa url for better security?

#

If this has been asked a thousand times, my apologies...

dark yoke May 10, 2020, 8:11 AM

#

No, it only do https.

fresh onyx May 10, 2020, 8:32 AM

#

So port forwarding is the only way? > No, it only do https.
@dark yoke

dark yoke May 10, 2020, 8:33 AM

#

no

#

that is one option, VPN is a better option

#

by using the wireguard add-on for instance

fresh onyx May 10, 2020, 8:35 AM

#

Perfect thanks

gritty hornet May 10, 2020, 8:52 AM

#

Ngninx so port forwarding through router then

lethal root May 10, 2020, 9:08 AM

#

What?

rotund thistle May 10, 2020, 3:19 PM

#

good morning, I am looking to see if there is a way to include Subject Alternative Name (SAN) in the Lets Encrypt addon?

wicked leaf May 10, 2020, 4:35 PM

#

hey i have question about FTP Addon, is there any way to set folder quota?

limber cedar May 10, 2020, 4:55 PM

#

Good Morning guys!

#

so since last reboot of my ubuntu + HA, my ad guard is just showing loading ring and seems non of the ads are being blocked any longer. I don't see any entry for Adgaurd Home in the logs. where else to check what's going on?

#

Found this in addon logs:

#

2020/05/10 11:58:18 [info] AdGuard Home, version v0.101.0, channel release
, arch linux amd64%!(EXTRA string=)
2020/05/10 11:58:18 [info] Upstream 0: https://dns10.quad9.net:443/dns-query
2020/05/10 11:58:18 [error] Couldn't load filter 3 contents due to stat /data/adguard/data/filters/3.txt: no such file or directory
2020/05/10 11:58:18 [info] Go to http://127.0.0.1:45158
2020/05/10 11:58:19 [info] Starting the DNS proxy server
2020/05/10 11:58:19 [info] Ratelimit is enabled and set to 20 rps
2020/05/10 11:58:19 [info] The server is configured to refuse ANY requests
2020/05/10 11:58:19 [info] DNS cache is enabled
2020/05/10 11:58:19 [info] Creating the UDP server socket
2020/05/10 11:58:19 [fatal] Couldn't start forwarding DNS server, cause: couldn't listen to UDP socket, cause: listen udp 0.0.0.0:53: bind: address already in use```

limber cedar May 10, 2020, 5:21 PM

#

I had fixed the port 53 issue last time using the 'sudo systmctl disable system-resolved'

dark yoke May 10, 2020, 5:22 PM

#

That does not fix it, it hides it

#

This is not an issue with the addon, but how you run your #330944238910963714 installation, if you need help with that, try asking in #330944238910963714

limber cedar May 10, 2020, 5:27 PM

#

thanks

lunar oxide May 10, 2020, 5:33 PM

#

how is discovery_prefix: used in mqtt config? for supervised install, is this the account it needs in the HA users list?

#

is it possible to configure mosquitto add-on to use another mqtt instance?

dark yoke May 10, 2020, 5:41 PM

#

https://github.com/home-assistant/hassio-addons/tree/master/duckdns#known-issues-and-limitations @sly kindle you where right 👍

upper stump May 10, 2020, 6:11 PM

#

Any way to make the Lets Encrypt plugin try and do the http challenge on a port other than 80? My ISP blocks 80 inbound.

dark yoke May 10, 2020, 6:14 PM

#

no, you need 80.
or use DNS validation

upper stump May 10, 2020, 6:15 PM

#

Would use DNS validation if it worked with Google Domains.

obtuse orbit May 10, 2020, 6:15 PM

#

i activeted homekit and got once the qr code. on iphone integration failed and i cant get the qr code again. No restart, no reinstall, nothing brought this back again. any hint

upper stump May 10, 2020, 6:16 PM

#

The dns-google provider that the letsencrypt addon supports is for google cloud. Toying around with nginx proxy on my server out in the cloud to get around this 🤔

#

Think I found a workaround, might be able to use digitalocean dns instead 🤔

dark yoke May 10, 2020, 6:27 PM

#

or cloudflare 🤷‍♂️

upper stump May 10, 2020, 6:28 PM

#

cloudflare would work, but I've already got a DO account, so simplifies things. just gotta change what domain I'm using with HA (would rather not change the nameserver on the previous ones since it'll break a few in-production things)

dark yoke May 10, 2020, 6:29 PM

#

CF give you a 15y SSL cert, so you don't need LE

chrome falcon May 10, 2020, 6:45 PM

#

I have installed the official "Terminal & SSH" addon. In the configuration tab, I have set a password. When starting the addon, log displays "SSH port is disabled. Prevent start of SSH server."

What setting do I need to change?

#

Under configuration --> network, the container is "22/tcp", host is "null"

#

Do I need to input the IP of Home Assistant under host?

dark yoke May 10, 2020, 6:46 PM

#

Add 22 instead of null there

chrome falcon May 10, 2020, 6:47 PM

#

Thank you!

#

I'll continue with next question. I am trying to control my TV via HDMI CEC. I have installed the official "CEC Scanner" addon, as the "cec-client" command is not supported as far as I know.

lunar oxide May 10, 2020, 6:50 PM

#

learning through experimentation and reading and headbanging: IF you want to share an mqtt server on a supervised install, you have to add mqtt: config manually. You cannot install mosquitto addon and then point to another instance. Maybe y'all knew that... but now i do, too 😉

chrome falcon May 10, 2020, 6:50 PM

#

It shows an error "ERROR: [ 49] RegisterLogicalAddress - CEC is being used by another application. Run "tvservice --off" and try again."

#

Trying to run "tvservice --off" via SSH or local terminal shows that command is not found

#

And to answer my question, the HDMI CEC device needs to be connected to the device (raspberry pi in my case) before starting home assistant device

glass junco May 10, 2020, 9:47 PM

#

Is there an SSH add-on which allows access to my GPIOs? Looking to flash a CC2531 with HassOS.

#

Ah it seems like Frenck's does!

#

https://community.home-assistant.io/t/home-assistant-community-add-on-ssh-web-terminal/33820

jovial remnant May 10, 2020, 11:11 PM

#

anyone know of a tutorial to install OpenALPR?

#

https://www.home-assistant.io/integrations/openalpr_local/

dull jewel May 11, 2020, 5:55 AM

#

Anyone know why the VS Code addon is no longer auto-indenting? Super frustrating to code in it!

dark yoke May 11, 2020, 7:05 AM

#

make sure it say Home Assistant in the bottom right

weary stratus May 11, 2020, 8:44 AM

#

Hello! I would like to develop my final degree thesis with Home Assistant, and I wonder if I could connect my own devices, like my custom made setup, (devices available at my University´s laboratory), does anyone know?

nimble kraken May 11, 2020, 9:19 AM

#

what devices?

weary stratus May 11, 2020, 9:23 AM

#

My custom made sensors, as temperature/humidity sensor, or devices to control AC/ heating...

nimble kraken May 11, 2020, 9:25 AM

#

tru mqtt perhaps? how you can read the values from this sensors? http api?

#

or devices? not customs?

#

check https://www.home-assistant.io/integrations/

weary stratus May 11, 2020, 9:26 AM

#

I mean, I have seen there are 1582 available integrations, but my question is, if I could connect other devices to Home Assistant, in order to read data from them appart from those

nimble kraken May 11, 2020, 9:26 AM

#

if you have some kind of api, mostly yes

weary stratus May 11, 2020, 9:27 AM

#

sorry, what is api?

nimble kraken May 11, 2020, 9:27 AM

#

and when they are custom made u can probably add that when its missing...

#

Application Programming Interface?

dark yoke May 11, 2020, 9:28 AM

#

Automatic Probmlem Infuser

nimble kraken May 11, 2020, 9:29 AM

#

rofl

weary stratus May 11, 2020, 9:30 AM

#

oh! Thank you!

#

But I still don´t get how I could relate this api with my custom made devices and Home Assistant

#

do you know?

nimble kraken May 11, 2020, 9:36 AM

#

nope i dont know your custom device

#

hav'ta go! l8rs

#

lets just say... http rest sensor...

#

or smthg similar

#

https://www.home-assistant.io/integrations/arest/

#

have fun!

#

perhaps integrate mqtt to your custom 🙂

weary stratus May 11, 2020, 9:43 AM

#

thanks!!

bright sleet May 11, 2020, 10:03 AM

#

Hey everyone, I have a problem with my lets encrypt certificate. It worked for a few months but now it doesnt renew

dense spadeBOT May 11, 2020, 10:04 AM

#

@bright sleet posted a code wall, it is moved here --> https://paste.ubuntu.com/p/t2kPtD2PDM/

bright sleet May 11, 2020, 10:04 AM

#

Can someone help?

#

nevermind, I had port 81 in the config selected

dusk vigil May 11, 2020, 10:14 AM

#

@bright sleet great 🙂

subtle mason May 11, 2020, 11:43 AM

#

Anyone, I dont know if it is the rigth place... but how to add homebrige to the HA? anyone?

#

@dusk vigil I did not get help at the #integrations-archived

dusk vigil May 11, 2020, 11:49 AM

#

Should be there

#

https://www.home-assistant.io/integrations/homekit/

proper turret May 11, 2020, 12:58 PM

#

anyone knows if there is a plugin for a Digital picture frame for HA?

tall obsidian May 11, 2020, 1:11 PM

#

I successfully install duckdns addon do I need to install let's encrypt addon for renewing the ssl certificate

tardy thorn May 11, 2020, 1:34 PM

#

where can I find the motioneye conf file, having trouble with a camera, I'm assuming that the device name is being changed from Video1 to something else which is why it stops working but I can't find the conf file

weary stratus May 11, 2020, 2:54 PM

#

can ysomeone tell me how to install the esphome addon on hassos?
can not find in supervisor and can not add a repo

lethal root May 11, 2020, 2:54 PM

#

What do you mean can't add a repo?

sly kindle May 11, 2020, 2:56 PM

#

@weary stratus adding repos has moved. upper right corner three dots

weary stratus May 11, 2020, 2:57 PM

#

omg thx 😄

tepid sleet May 11, 2020, 3:05 PM

#

Not sure if this is the proper place to ask, but I have installed adguard and set the DNS on my ubiquiti setup. then Home assistant vm on my unraid server crashed due to the latest update and then after I restarted the VM a few times, HA didnt want to start up. So what happened as a result of this is that my network stopped working. So I had to remove the dns record in ubiquity and then restart some of the devices.. Is there a better way to set up adguard to avoid this?

sly kindle May 11, 2020, 3:10 PM

#

@tepid sleet first, you would want to make sure unraid itself is set with a static ip and external dns in its network settings.

#

you don't want unraid relying on getting dns from a vm that it is itself running.

#

The same goes for Home Assisstant.

brisk edge May 11, 2020, 6:14 PM

#

How do I get the ad block home add-on working? (networking noob here)

#

*adguard

lethal root May 11, 2020, 6:21 PM

#

You press install

#

That's about it really

#

Then to make use of it you point your device to the HA IP for DNS

brisk edge May 11, 2020, 6:22 PM

#

i just tried that

#

my phone has no internet now

lethal root May 11, 2020, 6:23 PM

#

Do you have upstream servers defined in your adguard?

brisk edge May 11, 2020, 6:23 PM

#

just the default one

lethal root May 11, 2020, 6:24 PM

#

https://dns10.quad9.net/dns-query I take it?

brisk edge May 11, 2020, 6:24 PM

#

yes

lethal root May 11, 2020, 6:24 PM

#

Does adguard say anything about blocked queries?

brisk edge May 11, 2020, 6:24 PM

#

so if my HA DNS ip is 8.8.8.8, I should set my phone's DNS ip to that?

lethal root May 11, 2020, 6:24 PM

#

No

#

8.8.8.8 is Google's DNS server

brisk edge May 11, 2020, 6:25 PM

#

ok

lethal root May 11, 2020, 6:25 PM

#

Your ha IP is probably 192.168.1.??

#

Which is what your DNS server on your device should be

brisk edge May 11, 2020, 6:25 PM

#

its 10.0.0.100

lethal root May 11, 2020, 6:25 PM

#

That's the HA IP?

brisk edge May 11, 2020, 6:25 PM

#

the yes

lethal root May 11, 2020, 6:25 PM

#

What's your device's IP?

brisk edge May 11, 2020, 6:25 PM

#

the phone?

lethal root May 11, 2020, 6:25 PM

#

Whatever has no internet now

brisk edge May 11, 2020, 6:26 PM

#

10.0.0.246

lethal root May 11, 2020, 6:26 PM

#

And you're on the same subnet I take it, all is /24 ?

brisk edge May 11, 2020, 6:26 PM

#

yes I think so

#

I did a usb stick flash on the raspi with static ip and dns

lethal root May 11, 2020, 6:28 PM

#

adguard is started, it's not off or anything? 😛

brisk edge May 11, 2020, 6:28 PM

#

yeah it's on

lethal root May 11, 2020, 6:28 PM

#

sorry dinnertime

brisk edge May 11, 2020, 6:40 PM

#

I just tried it on my computer and it's working perfectly. Maybe once i configure it on a router level the issues will go away

dull jewel May 11, 2020, 10:21 PM

#

Anyone know why the VS Code addon would not be auto-indenting my YAML? Python code works fine.

plush hawk May 11, 2020, 11:57 PM

#

Can anyone explain why DNSmasq is stopping add-ons and HA updating

crimson cliff May 12, 2020, 1:22 AM

#

Can someone point me in the direction of using Ada and Almond? I have both installed but can't find any documentation on how/where to tell it what commands do what.

silver oak May 12, 2020, 1:52 AM

#

so if I use the Samba addon in hass.io and it seems to fail to start with no logs... what do I do?

#

it seems like it's not super easy to ssh in

#

actually I see the error under system now

knotty egret May 12, 2020, 1:55 AM

#

the samba add-on is not showing any config to edit. It seems like it installs, but then it won't start. There's no config, so I can't set the password which I assume is the problem.

silver oak May 12, 2020, 1:56 AM

#

hehe

#

that is the problem

knotty egret May 12, 2020, 1:56 AM

#

Why am I not seeing configs for any add-ons?

silver oak May 12, 2020, 1:56 AM

#

I saw the message under System. But I had config for mine, :S

knotty egret May 12, 2020, 2:00 AM

#

strange I'm just trying to restore my HA because it stopped booting. the first time around, I could edit the config, but this time it's just not giving me a config to edit 😦

#

It's also super annoying that I can't just upload a snapshot to restore through the snapshot page.

#

oh it got moved out of the main add-on page to a different tab 🤦‍♂️

plush hawk May 12, 2020, 7:30 AM

#

Dnsmasq is blocking my add-ons and ha from updating any ideas on how to fix this

supple swallow May 12, 2020, 7:50 AM

#

dumb question ... mariadb has a entry in config called network.. it should expose port 3306 for external connections.. I would think that % would allow all to connect on the local network.. I have hassio talking and logging locally on my pi but external connections aren't working mildpanic (Gafanna, Mysql browser, etc) .. what the heck am I missing. If I put any thing in the add on configuration next to the 3306/tcp is just goes to null.

gilded totem May 12, 2020, 9:59 AM

#

MQTT / Zigbee2mqtt problem; i have installed zigbee2mqtt add-on , i think it run well, when i look log file i see MQTT publish
zigbee2mqtt:info 2020-05-12 11:53:36: MQTT publish: topic 'zigbee2mqtt/0x00158d000450733c', payload '{"battery":100,"voltage":3035,"illuminance":114,"illuminance_lux":114,"linkquality":84,"occupancy":true}'
i have installed MQTT broker, when i read log file i don't see something wrong
1589272359: Saving in-memory database to /data/mosquitto.db. 1589273360: Client auto-2E74A7BE-0CE7-097F-890C-E2EB8BB542D5 disconnected. 1589273378: New connection from 172.30.32.1 on port 1883. [INFO] found homeassistant on local database 1589273380: New client connected from 172.30.32.1 as auto-F387D63F-0A2F-AD60-8713-56AB17981DEB (p2, c1, k60, u'homeassistant'). 1589274160: Saving in-memory database to /data/mosquitto.db. 1589275961: Saving in-memory database to /data/mosquitto.db.
but nothing appears in notification, no devices.... have you an idea of my problem ?

lethal root May 12, 2020, 10:35 AM

#

@plush hawk how is DNSmasq blocking them though

#

@supple swallow did you restart mariadb after setting external port?

#

This is what it should look like: https://prnt.sc/sf9bmg

plush hawk May 12, 2020, 11:11 AM

#

@lethal root thanks for checking in. not sure how but I went 3 months with out a HA update, I’m using DNSmasq to (resolve) capture my air conditioner. Looks like I’ll just have to setup a separate dns server on a stand-alone pi4

lethal root May 12, 2020, 11:11 AM

#

Sounds more like something is amiss with port forwarding if you ask me

#

Do you have a proper upstream server?

#

Better yet, show me your Dnsmasq config

plush hawk May 12, 2020, 11:14 AM

#

No just a AirPort Extreme as a router I’m at work atm I’ll see what I can do

lethal root May 12, 2020, 11:15 AM

#

Hah

#

I just meant the DNS upstream

plush hawk May 12, 2020, 11:15 AM

#

No

lethal root May 12, 2020, 11:16 AM

#

Well you need a DNS upstream set for updates to happen, otherwise they won't be able to resolve any IP

#

usually 8.8.8.8 or 1.1.1.1

plush hawk May 12, 2020, 11:17 AM

#

I use the telstra dns servers

#

Not google

#

There the service providers dns server sorry or the confusion

#

It’s got some thing to do with a loop back problem because HA is running on the same device as dnsmasq is running I’ve read some people have a similar problem with duckdns

lethal root May 12, 2020, 11:26 AM

#

The only loopback that is a problem is if your router doesn't support NAT Loopback

#

Which sounds like a DNS issue but really is a router issue

#

The solution for me was to make Dnsmasq resolve my "external URL" to my internal IP for internal devices

#

This does mean https won't work though, which is why I've switched to an Nginx proxy

plush hawk May 12, 2020, 11:31 AM

#

Ok thanks for your help that will give something to look into the next couple of days

lethal root May 12, 2020, 11:39 AM

#

NAT loopback is for services calling the long/duckdns URL for a local IP/port, so it shouldn't affect just getting updates etc.

plush hawk May 12, 2020, 11:41 AM

#

It’s strange because I can update hacs but not HA add ons

lethal root May 12, 2020, 11:53 AM

#

What happens if you just turn off dnsmasq

supple swallow May 12, 2020, 2:20 PM

#

@lethal root Yup.. figured it out. I was able to pull the data out of the mariadb instance. I lost afew months of data but got a years worth. I also got influxdb functional again. A simple choose the external port to use would have been nice .. it is no where in the instructions or documentation. I'll look at throwing a snippet on the docs. Shouldn't have been that hard. On a related note, does anybody know how to back fill that influx database with the time series data from the mariadb?

lethal root May 12, 2020, 2:21 PM

#

Willey my man

#

I use my mariadb externally

#

It wasn't hard at all

#

I just set the standard 3306 port and off I was

supple swallow May 12, 2020, 2:24 PM

#

I'm looking at moving from the PI to a NUC with SSD.

#

didn't want to loose the data as I am doing functional improvements to the ventilation and HVAC. Hard to justify the cost to the misses if you don't have HARD data...

lethal root May 12, 2020, 2:25 PM

#

I have the mariadb addon and phpmyadmin

#

I used the second to make a new DB/user

#

The network port was off externally, but I put 3306 there and it worked

#

Maybe your addon needs to be off to be able to change the port first? idk

#

This isn't about not seeing where the config option is, right? Because the config moved to a tab at the top instead of just under the info

supple swallow May 12, 2020, 2:28 PM

#

O I can talk to MariaDB... and I can have influxdb taking in new points. I just want to use the existing data in mariadb and shove into influxdb.

#

yes... it just isn't well labeled.. it says "host".. not "external port"

lethal root May 12, 2020, 2:29 PM

#

"Host" is the Hassos Host, so that would be the part that can interface with the outside world so... external 😛

#

Do you have the PHPMyAdmin plugin?

supple swallow May 12, 2020, 2:30 PM

#

I like the Chrome extenstion for mysql.. works fine with mariadb and i've used it for years

#

I didn't put the PHPMyAdmin plug on Hass yet

lethal root May 12, 2020, 2:31 PM

#

uh

#

That plugin looks so amateuristic tbh

#

The point is, if you have phpmyadmin or maybe in that chrome plugin thing... you can just export/import the data, no?

supple swallow May 12, 2020, 2:32 PM

#

I just use it to pull data.. when you have only a few brain cells.. you use the tool at hand.

#

yup.. I can do that.. but influx is time series .. not relation db like mariadb

#

so it takes some massaging from what I understand, I just didn't want to trail blaze if I didn't need to

lethal root May 12, 2020, 2:34 PM

#

Well there's no ready set go script in HA, but feel free to google "convert influxdb to mysql/mariadb" 😛

supple swallow May 12, 2020, 2:34 PM

#

I have .. its a .... Process

#

my google fu is weak but I do use it regularly

lethal root May 12, 2020, 2:35 PM

#

Man, every single hit so far is migrate TO influx

supple swallow May 12, 2020, 2:38 PM

#

https://www.paolotagliaferri.com/home-assistant-data-persistence-and-visualization-with-grafana-and-influxdb/ seems like a good write up so far..

silver sparrow May 12, 2020, 3:32 PM

#

How may I deactivate my embedded MQTT broker? I want to use the add-on. It seems to be homeassistant prefers to use the embedded. Here is my log:

#

2020-05-12 16:28:06 WARNING (MainThread) [homeassistant.components.mqtt] Data in your configuration entry is going to override your configuration.yaml: {'broker': 'core-mosquitto', 'discovery': True, 'password': '[...]', 'port': 1883, 'protocol': '3.1.1', 'username': 'homeassistant'}

#

This is my configuration.yaml:

#

mqtt:
discovery: true
discovery_prefix: z2m
broker: 10.0.1.77 # Remove if you want to use builtin-in MQTT broker
birth_message:
topic: 'hass/status'
payload: 'online'
will_message:
topic: 'hass/status'
payload: 'offline'

sly kindle May 12, 2020, 3:34 PM

#

Data in your configuration entry is going to override your configuration.yaml:

#

Your configuration entry is the one you made using the UI

#

it is going to override your yaml there

#

you can remove that yaml

silver sparrow May 12, 2020, 3:35 PM

#

In Integrations? So I just have to remove the UI integration?

sly kindle May 12, 2020, 3:36 PM

#

if you want

silver sparrow May 12, 2020, 3:36 PM

#

Thanks! Trying now

sly kindle May 12, 2020, 3:36 PM

#

what is 10.0.1.77 ?

#

is that your HA instance?

silver sparrow May 12, 2020, 3:37 PM

#

The Rpi's internal IP

sly kindle May 12, 2020, 3:37 PM

#

ok

silver sparrow May 12, 2020, 3:38 PM

#

Wow - so simple. 1000 thanks, Cogneato!

#

(Working now)

patent copper May 12, 2020, 4:07 PM

#

Hey! Quick question: I use the InlfuxDB addon. If i do a partial restore of that addon alone, will it also restore the DB?

sly kindle May 12, 2020, 4:09 PM

#

it should, yes

patent copper May 12, 2020, 4:12 PM

#

Any circumstances where it wouldn't? As you propably understand by now, I've done a restore and the the history is gone...

#

And that is OK for now, but I would like to make sure I have a backup of the history in the future...

sly kindle May 12, 2020, 4:34 PM

#

a snapshot will contain addon config and add-on data if there is any @patent copper

#

I don't know where influxdb stores it though

#

does it create a directory in config?

#

I don't use it

gritty hornet May 12, 2020, 4:48 PM

#

Can anyone tell me what I need to look at here, Running a third party addon which is unable to see service.yaml or somethinghttps://hastebin.com/rofupawuba.makefile

sly kindle May 12, 2020, 5:14 PM

#

addons are docker containers. this looks like a custom integration?

gritty hornet May 12, 2020, 7:25 PM

#

Unable to find services.yaml for the octopusagile integration - no idea what I messed up

crimson cliff May 12, 2020, 8:19 PM

#

Is there a list of which commands are supported by Ada?

limpid abyss May 13, 2020, 1:27 AM

#

Hi all... brand new to HA... Just set up a brand new installation on a Pi 4 using the image from the site. Everything seems fine except for the Add-Ons Store. When I click it, I just get an infinite spinner. I haven't found anything about this in the community or on google or the FAQ or anywhere else (usually I'm pretty good at finding stuff there. I haven't messed with any custom configuration or adding any add-on repositories. I've tried restarting. At this time, I really just want to install the ssh add-on so I can get into the pi remotely. I see a bunch of entries in the system log:

20-05-13 01:25:50 ERROR (MainThread) [supervisor.utils.json] Can't read json from /data/addons/git/a0d7b954/repository.json: [Errno 2] No such file or directory: '/data/addons/git/a0d7b954/repository.json'
20-05-13 01:25:50 WARNING (MainThread) [supervisor.store.data] Can't read repository information from /data/addons/git/a0d7b954/repository.json

sly kindle May 13, 2020, 1:31 AM

#

@limpid abyss tried an incognito/private tab?

limpid abyss May 13, 2020, 1:31 AM

#

not as yet... one sec

#

looks like it's doing the same thing

sly kindle May 13, 2020, 1:33 AM

#

Can you reload the supervisor from the system tab

limpid abyss May 13, 2020, 1:36 AM

#

I get this in the system log, but the issue remains:

20-05-13 01:36:18 INFO (MainThread) [supervisor.updater] Fetch update data from https://version.home-assistant.io/stable.json

#

Tried edge too, just for grins. Same. Restarting the whole pi didn't change anything either.

#

I did have the power disconnect during the very first start up. I'm starting to wonder if that somehow hosed the add on files.

#

I'm just going to try reloading the image and starting over. I'll update when done.

#

Loads right up now. It must have been the power loss during initial startup.

#

Sorry to have bothered you @sly kindle , but at least now you can add that to your list of things that can happen. 😛

sly kindle May 13, 2020, 2:20 AM

#

no problem

forest brook May 13, 2020, 6:29 AM

#

My Netatmo integration just went out again, who was it that was looking into the problem with rate-limiting? Was it you @sly kindle ?

sly kindle May 13, 2020, 6:40 AM

#

@forest brook cgtobi

forest brook May 13, 2020, 6:43 AM

#

@reef ingot the netatmo integration went out again, is there anything you would like to me to test? Or log files I need to look into?

reef ingot May 13, 2020, 7:02 AM

#

@forest brook Could give me a bit more details?

weary stratus May 13, 2020, 7:17 AM

#

it's something wrong with my duckdns. it takes 15-20 minutes to restart Hass

#

on an rsp4

#

when i installed the addon i started to happen

#

https://paste.ubuntu.com/p/kt4D3MzPHB/

#

i can see that base_url and domain is not the same. should i add or delete https?

lethal root May 13, 2020, 7:24 AM

#

integration or addon? Because if the former it's #integrations-archived @forest brook

#

@weary stratus domain for duckdns config is fine, you don't need to put http or https there, base_url is also fine for config, because you are using https