#the-water-cooler
1 messages · Page 591 of 1
I can eat a whole package on a whim
Same. but it has to be cooked
eh, its not a good idea, but raw pork from a first world nation isn't as bad as it could be
I've never been food poisoned in my life
I eat raw ground beef too, although mostly limited to 50g by the wife
Wat
you probably been food poisoned this whole time, you just nevver experienced life without being poisioned to know the difference
I have eaten half a package quite a few times though
Homemade beef tartare is noice
Serious question now... When the waiter asks how you want your steak, have you ever said "raw"? 😂
Norwegians never heard the phrase don't eat food that fell onto the ground
"still living" raises eyebrows
5 second rule måttafåkkas
I mean 5 second rule applies everywhere
Aha, so you are on the good bit of land, I am on the yellow and blue bit next to you :)
Are you remembering to watch my printer @forest edge å ?
Or should I just stop paying you
🧐
atxbyea autopsy will look like those pictures you see when they open up sharks and license plates fall out
I admire your iron stomach. Also slightly jealous that you can experience raw meat without getting ill
@last cedar Corona country I see
you two are neighbors lol
Yeah, proper disaster here.i think people actually actively seek to be close to each other, not like the Scandinavian norm
Yes
I can get on my moose and ride over the border
Are you remembering to watch my printer @forest edge å ?
@clear ferry you never reposted your link to it so it's lost in the abyss
wtf is that
@last cedar I've been twice to Sweden already this year for work, and 5 times for shopping
another night before christmas thing?
@forest edge Halloween lamp
Are you close to the border then? Poor you. Sorry you had to come and visit 😂
so where is the link to the other 3 cameras?
Remixed From 'Skull Playset': http://www.thingiverse.com/thing:163311
Design Tool:Meshmixer
3D printer:Flashforge CREATOR
Slice Tool:Makeware
Printed in PLA with the settings:
infill:0%
Number of Shells:2
Layer Height:0.2mm
Speed while Extruding:60 mm/sec
More Photos & Process...
I need to get a 3d printer
@last cedar 1h20m roughly, but since Corona I've done 6 installs in Sweden from home office
@forest edge do it
Closest I have been is Karlstad. I live in Eskilstuna.
I've been often to Karlstad, my parents have a house in Säffle, was driving to Karlskrona in January for a job
My fluent Swedish have fooled many Swedes
Nice!!! I like Säffle, really calm and isolated
Used to work in Ireland on a Scandinavian desk, 90% were Swedes
I mean, I am a British but can mostly understand Norwegian anyway. You probably sound like a native. As long as you don't say "gul böj" because we will know you are an imposter.
Akta dig, där kommer farthinderet
Unless you have Skåne dialekt. Because that needs a decoder ring.
My father's favourite Swedish word
Farthinder hahaha

After all the raw meat you eat, a fart hinder would be a disaster
My mum thought "utfart" was hillarious
💩 💩 💩
Humans are easy
We enjoy the same stuff across languages
I used to have a pretty convincing Irish accent, but these days I can only pull it off if I'm talking to an Irish person
Indeed!
Irish is lovely ❤️
oh great... https://youtu.be/rD3CB8Ne2GU
Lake Jackson has lifted its "do not use water advisory" but has also placed a boil water notice in effect after brain-eating amoeba was found in the water supply. MORE: https://www.khou.com/article/news/local/lake-jackson-disaster-declaration-brain-eating-amoeba/285-158867ec-1...
it's messed up, makes you wonder what else slipped through because people were distracted by the pandemic and weren't focused on thier crticial jobs
Here they are freaking out because 50 people got confirmed on Friday,so now they are inducing more lockdowns it seems
We have 270 dead so far
And 13600 total confirmed
well they did predict a second spike in the fall for those who had the spike early in the year
Brain eating amoebas. Sounds like something Trump got the FBI to put into the water /s
In Sweden it is more like, oh we have 5500 dead. Lets just all wash out hands. Literally
We have been back to normal basically since June
Except for plexiglass in front of cashiers
And facemasks on planes, but I think that is international
Perhaps yes. We have similar here with plexiglass. But no restrictions really. Apart from the odd person with a mask, nothing is different tbh
Exactly
Oh yeah, stickers on the floor, with the 1.5m thing
I see one in 100 at the store with a mask, mostly elderly
But people still walk by, nearly running into you
Probably less than that here. People don't really make an effort, myself included.
I don't ever use alchohol gel, only if I have to go to hospital, but I have been doing for this year.
So I guess I am part of the problem too!
I only have one fixed customer visit every week, and there is hand disinfectant all over the place, so I use that, and at the store I use disinfectant when entering and leaving, and I do facemask when flying
That's about it
Same with the stores
Unfortunately I work for the municipality basically (my job is 99% for them, 1% our other customers) so on average I visit maybe 3 schools a day
I am amazed I don't have more colds/ have got covid yet tbh
schools are breeding grounds here lol
Interesting trends
@forest edge which is why we do remote school, but that's hard in murica because technology so hard wow
🤫
Can be daycare up to college age, so all ages
But how can you home school on dial up? /s
👆
@forest edge which is why we do remote school, but that's hard in murica because technology so hard wow
@clear ferry we do it too but it's optional
💩
I like how your case curve is just steady going up lol
Rural UK is also a disaster for internet
How is Sweden looking?
I almost don't dare ask
5500 dead yet? Or did that pass
@last cedar my mum is in rural uk (kinda)...
she's got a 300/300 connection from gigaclear
Rupester, I am from there pretty much, but we had it good with internet
but i know... you're right
I know of some people who have gone over to microwave links
in general it's poor she's just loucky
Yeah :)
and it's a village outisde peterborough so not isolated rural if yu get me
but boy is it fast, it's amazing !!!
I like how the recovvered section for sweden just says N/A lmao
recommend gigaclear if you ever see it
Aha, I was thinking Yorkshire :D gods own county
haha, quite right.
@forest edge plot twist. No one recovers
certianly not there
We just throw people off into the sea. Hence the NA
Looks bad for the numbers if you report it
@proven pasture I think my parents have 108mb via Virgin these days
Coax cable to the house
isn't sweden that country that decided to not do anything when all this started?
lol
1 keep distance
2 wash hands often
Was first introduced
Then iirc no gatherings over 500 people
That is currently 50 now
And avoid rush hour travel, work at home if possible
That is basically it
they were saying on news clips you didn't even do any of that
like you all did nothing, as if it never existed
I mean the 50 peopel gathering rule gets broken all the time
Schools for example
Might be 9 years of children still
All use the same dining room, not at the same time though
pro tip - put the virgin "router" in modem only mode and get a decent router and AP
i use an ubiquiti edgereouter-X and unifi APs (x3)
I am planning to send my parents my current opn sense box when I upgrade to a rack mounted one. Optiplex 7010 with a i350 t4
@proven pasture haha,wth that is the strangest speed I have ever seen
3 unifi aps. Do you like in Buckingham Palace!?
@clear ferry it's not actually that, something llike that... haha... i can't remember
lol passivve ap
@last cedar big place yeah but not massive. set the APs to lower power and have multiple APs.. best way i think
Yeah, roaming is solid it seems
I currently use a single eap245 at home. It is pretty solid IMO
I do however have one mounted in the roof (external on front of house in the eaves). Covers the front garden, drive and the road - hilarious - i love it.
I configured a 1500 ap setup in a hospital, tuning power for minimal overlap was.... Interesting
We have a 96m2 appartment, so not large
You and your crazy wifi setups
Are those 24 aps in the garage for cooking chickens when your microwave breaks?
You should see my wired ones then!
I guess you cook chicken? Or do you also eat that raw?
Cooking chicken? Just eat em raaaaaaw
😂
No seriously, don't eat raw chicken
how he is able to eat "raw meat" the waves actually cook the meat enough before it enters his mouth
With 24 aps it is probably incinerated
I am looking at a house at the moment, 133m2, 2 floors brick built. So probably going to need another ap if it turns out to be nice
Also gonna have to sort out some nice cameras for outside
That would be a pretty normal Norwegian house
I could legit lose my faamily if we had 250m2
My parents have... 330m2, plus two garages and two apartments in the house
Not gonna lie, that's huge
My sisters live in smaller houses, probably 180m2
But the house I grew up in was probably 450
Luxurious.... 60m2 here.
🤏
I would love a good sized garage though, old volvo has lots of stuff to fix!!
Smallest I've ever lived in was 55m2
And I need somewhere to park my moose
Your bathroom is probably larger than that now 😂
yup... that was my plan with this appartment too...
life happened, five years later looking for houses again.
My bathrooms are tiny actually, but I have 2 bathrooms and two WCs
I honestly didn't want to move. But neighbours above moved out and we got an incredibly shitty family living above us. They all have concrete feet. Wake up at 6am and sleep at 11pm, never get any peace when we are at home.
I bought in a dip in the market 12 years ago, paid 2.1million NOK, 500k under asking price
Built in 1985 but still
not 1 pizza... 1 whisky
Last I was out paying my own drinks..... 2011?
This I was looking at is 2.2M sek. Geothermal heating too, so it should be fairly cheap to run
Colleagues of mine used to fly to Oslo every other week pre-corona
Brick built so a little ugly but nothing that needs painting
I like brick, but that is exotic here
Orange brick I might add. Reminds me of Manchester
I used to fly 1-2 times per week just before corona, but before that it was 2-3 times per quarter, stuff is starting to pick up again so I might get some flight miles again 🤣
It hasn't won any design awards anyway. But I am more looking for a downstairs room for all my toys :) got to have a teknikrum!
I'll laugh if covid causes everyone to lose their black / platinum frequent flyer status
I have all my fun stuff in the garage, which is in the basement
Just stay safe please. I wouldn't want to travel by plane even with masks on everyone
I don't think the planes are the risk... the airports are the risks.
This has main water supply coming into the garage. Not good for a teknikrum
shiny guitar
Lots of nice toys there!
I have water too, practical when I have my winter greenhouse in the garage
This was the main supply. Would be a dead server rack in seconds with a burst pipe. Looked like there was a room on the other side that would be suitable, the room next to the laundry room
No windows either, slightly better security
I am paranoid. It is what I work with. I have seen some things
If you know what I mean
I can count the number of break ins I've ever heard people have on... One hand
I also think it is very very fun to play with stuff :D
Looking at setting up and RCO system at home, if you have seen any of their stuff.
It is great to work with, literally anything is possible with enough time and imagination.
I can DIY it all, but would end up being relays controlling external stuff
Rather than an integration
I am going to try and see how easy it would be to integrate to though, it is on my to do list
It points at a server, ideally 24/7
I think the server is easier to query than the system itself
But unsure exactly how much the server gets to know from the system, other than "important events"
Not sure if it logs changes in states for alarm zones etc
I think he just links the same picture over and over, was probably taken in 2000
cause it always looks the same
those pop cans are always there
I think it looks way more messy now, that was the most "clean" it's ever been lol
😠 😠 😠 😠
😂
But yeah, I need to look into how easy an integration would be. I am guessing well beyond what I can do, I am not a coder.
Otherwise it would just be simple integration via relays for movement in zones to trigger lights etc, follow armed/ disarmed states etc
haha I called it!
There is a lot going on in that picture
garage looks like one of those old 80's tv/stereo repair shops
Wow
So cruel yet so accurate
This was pretty clean too
here we go, his hand is going limp so we get these "twisted" pictures lol
I am lowkey jealous of that garage tho
It has old volvo repair shop written all over it
@clear ferry spend a weekend and organize man lol
Need a heatercore and some hosez, timing belt and water pump and tensioners on her. Not doing it stood outside :P
3d print yourself some hooks or something lmao
I have a Volvo V70 though
The car of the gods
Ours is a 1999 though
A real volvo
With the italian throttle body that poos in the bed
volvo's here are overpriced turds
I have a 2005, the last range produced in Sweden
Which hasn't pood
I had a 1976 245 at one point, great car
They need a lot of small routine maintenance unfortunately
Which people normally dont do
Leading to overpriced turds
240s are the stuff of legends
I would love a 2007 V70R. But not gonna happen
They sell for silly money
I might upgrade to a XC90, or BMW X5 or a VW touareg when I'm done with this
Ours was 16500 sek. Has had a lot of blue box bits put on it in the last 7 years but it is great. Done 290k km (50k since 2013 when we bought it)
XC90s are lovely IMO
@clear ferry not gonna get something that drives itself?
@forest edge sorry, not falling for the EV scheme
@last cedar the V10 touareg is nice
Looks like I will be paying for a company car, not sure if we technicians can get the v60 t6, failing that we can get octavia hybrids. Which is nice
@clear ferry thought you all had more hybrid options over there?
They have silly rules about who can get what cars, based on if you work in or out.
I drive 30-40k km per year, I enjoy comfort
Hybrids are no use to me and EVs are too short range, or shit comfort like the Tesla
I heard the teslas were very comfortable
this what people here get if they want "comfort" https://www.cadillac.com/sedans/ct6-v
Discover the exclusive features of the Cadillac CT6-V such as, 10-speed transmission, V8 engine with 550 HP, seamless technology, & unquestionable style.
550HP. I bet that moves
yea I don't know much about the variations. I think the x was for range or something
oh, one was for range
but don't you have charge stations everywhere?
Yes
None for me, I fill diesel and petrol
💩
I don't wanna stop and charge every 3 hours
self driving means you could eat your gross pancake with stink cheese and no hands lol
think it's longer than 3 hours lol
and the charge time on the quick charge i thought was only a few mins
They were talking now about not having enough suitable cables out to the smaller villages etc to support electric car charging
In Sweden at least
For people to charge at home that is
Have a friend at work who lives about 6km off the main road. He doesn't even get 230V out there there is so much drop on the cable
It will be interesting how the problem evolves over time tbh
I am expecting their solution is to force us to pay for pv panels and a battery though. To save spending on infrastructure
Also, totally unrelated question. I run 0.96.5 HA. Time to upgrade? 😂
I didn't realise it was so old
Yes... just watch the 20 rounds of breaking changes 😉
It's do-able, but depending on your install method could be painful
someone did that not too long ago without issue, they went one step at a time
Docker and Venv are probably the most straightforward, since you can stand up a separate instance, test your config against it, and keep tweaking until it works
Just be like me and wait for 0.x.3 to be a few weeks old
That's close to my approach, which is to wait until it's been at least 2 days without another release in sight
https://github.com/home-assistant/core/milestones is my guide 😉
0.115.4 may bring back the ability to stream cameras to Google Home hubs too, which would make it the first of the 0.115 series I'd consider
I should probably update from 0.113.2
Venv for you then ...
#551864459891703809 can help, but installing Python 3.8.5 is easy 😉
when the hell is hassos 5.+ coming out
I think I'll skip 114, nothing jumping out to me
well I hope before nov because I'd like to get off this sdcard that's will be in service for a full year at that point lol
I am still on a pi 2 iirc with an sd card
Yes I know
No, I don't sleep at night
@clever mortar I am going to redo it on non pi hardware
No idea if I should do a vm with venv, or a docker or what
I want a frontend, something I don't have now
Needs to be able to talk to an arduino via usb
No idea what to do tbh
That's sounds like some serious upgrade
I think you should get some good hardware first
Pi2 is too weak for HA
i think that something like a second hand Dell Wyse Z90DE7 would be best value for money (inc power bills) solution for a start
and then install a new OS & new ver of HA on it, and try to migrate your config
you will be amazed how good the new versions are and how well your new machine will perform
@last cedar if you are on an rpi2 you may not want to upgrade
just saying the newer versions of HA are not optimized for the rpi2
Looking for some help, drawn a blank everywhere else. HA is running as a VM but lost connection to if via other computers, first one then everything, including the host computer. Keeps asking to log in but won't accept any of the genuine log in details. Anyone have any ideas?
@modern bone Not sure which install you're using? If you have system_health enabled you can check Configuration -> Info, or see the following.
-
If you're using HassOS, flashed an image, or booted a VM with an image you're using #330990055533576204
-
If you installed Linux and then ran a script to install HA and have add-ons then you have #330944238910963714
-
If you're running
dockercommands or use a Docker manager and have no add-ons then you have #449717345808547842 -
Finally, if you use
pipto install or upgrade you have #551864459891703809
Having difficulty chosing an install method? See this blog post for guidance.
@clear ferry ty that was helpful
@velvet horizon I have no idea what version i'm running, just followed a youtube tutorial on installing on a VM. I currently have no access to it from a browser and even worse at linux than I am with HA (of which I have no idea).
Odds are high then that you're using #330990055533576204
You'll know, because the console will mention it, and you'll be able to log in as root with no password
Has anyone an idea which type of plug this is?
Sorry maybe not the right topic but I search for 1h on Google and don't find this plug, maybe someone here has an idea... Totally frustrating
It's a JST connector I guess
@young thicket looks like the standard JST .25" spacing
@young thicket sorry that should be .1" 2.54mm spacing
🤏
If you search for JST 1.5 on eBay you will find loads of them. Pre-wires or the equipment to wire your own.
Great! We got the wrong shower delivered, because the one with the square shower heard is called -R and the one with the round shower head is called -S.
Still though. First shower indoors in three months! Woohoo!
Hello guys. Just curious who I could send a heart-felt email to on the Home Assistant team about some recent experiences of mine seeking help from the community and HA team as a whole. Should these concerns be addressed with baloob or is there someone dedicated to handling these types of concerns?
Balloob is an all-through nice guy who will definitely listen to you. But I also hope any of us in green would do the same.
thank you @low harness
execpt when you have not showered @low harness
mod
we have special sometimes stinky powers and insight
@vestal stag thou honestly ....pm one of us with we cant settle we will elevate and move up the chain
So, I do not want to come off as a Karen, for a lack of better words. But I do think over my several years of being here in this community, that on more than one instance I have felt shunned or belittled for not already have mastering python and whatever necessary languages there are to fix problems I may have on my own. And I just have a few questions and wouuld like to specifically share a more recent incident to find out what is the proper protocol or if anything at all can be done to smooth out these interactions.
is it better to PM?
i dont mind
yes prolly if it is a complaint that we can settle
thank you, I will be in touch
A recent incident, you say? I guess it wasn't me this time 🤣
@deft pewter you are a accomplish
i am sorry didnt know i had to spell and be politically correct @clear ferry
especially in text
I don't mind being accomplished.
well i typed too damn fast plus 🍻 dont help
Is that breakfast beers or still drinking beers
well lunch ...been up since 2 🤣
🤣
@clear ferry i am so sorry i did not realize this and i quote from a good friend
"I mean, it's not your fault that you're the offshoot of the world's largest empire"
so i humble myself for the giving of my silver spoon
@forest edge my wife must have heard you last night; she's making biscuits and gravy for breakfast 😂
hello
how many entities you guys have in your systems? how many entities is reasonably "too much" for HA?
opening Dev Tools -> States can easily freeze Chrome on my 2015 Macbook Air and even my 32GB RAM desktop struggles with it
but i dont think ive got a lot of things automated/templated compared to complexity of some configs i am seeing on github
it opens quickly for me, but filtering is pretty laggy
I have 985 entities
other than that, I don't think I'm anywhere near any sort of limit that actually affects the functionality of HA
there was a build a few months ago where opening dev->states was very slow, but I think clearing the browser cache fixed it
ive got 1050, but i think that the valetudo_map is killing my states page - it actually contains pixel per pixel map as content
the thing is im still building it up, for example every new xiaomi plant sensor (ive got just 6 so far) adds 6 new entities and ive got whole garden to monitor for my automatic watering
1891 on one instance and 600 on other
wow
Plant sensor?
impressive
tell me more
@last cedar https://www.home-assistant.io/integrations/miflora/ + https://www.home-assistant.io/integrations/plant/
@last cedar and for automatic watering: https://community.home-assistant.io/t/having-hozelock-cloud-controller-kit-intergration/55694/39
Amazing
That is sweet
Is it only bluetooth? Said bluetooth le on a spec sheet I saw
yeah, its just bluetooth
And the obvious question, do you have to learn how much a certain plant needs?
Some like little water, some like to drown etc
How do you blanket a whole house with bluetooth coverage?
the range on BLE isnt huge, but ive got a tiny Rasperry Pi running https://github.com/ThomDietrich/miflora-mqtt-daemon located in the centre of my house (so all the plants are in range) and feeding data to MQTT, planning to get another one for my garden
also when you add Miflora sensors to the phone app it contains a database of literally thousands of pounds together with the sensor values range for each
(im not sure how reliable that data is though), so its easy to just enter those numbers to plant sensor confirg
"Isn't huge" sounds like you would need to test it in the specific environment.
Also, once the pi has the bluetooth info it can send it over wifi or ethernet I guess, so problem solved there.
Oh nice, that sounds really well thought out
and also in my Raspberry Pi im using special long range bluetooth adapter https://www.lm-technologies.com/product/bluetooth-v4-0-dual-mode-long-range-usb-adapter-lm1010/ but im not sure if there's any meaningful benefit of having long range adapter
Oh nice, that sounds really well thought out
@last cedar yeah and you can have more than one Pi feeding data, im planning another one in my backgarden
But I also run ha on a 24core/128g server
What a monster@clear ferry
I have 1.6K entities, of which some 350 are automations. it runs on a subset of an old i5 😉
and i only have 96gb of ram and 12 cores
Dell ?
Yes, went from a HP BL460c g7 to a dell r510
Ooh!
btw i honestly recommend an upgrade from x10 series to x20 series, the difference is HUGE
Is the 210ii doing router duty now?
@last cedar how did you know?
I am in your server room@nocturne aspen
Yeah, that is a whole tock generation @nocturne aspen
Was just making sure
@last cedar yeah, R210II replaced my Dell Wyse as a router
Nah, they have been popular forever
And I think they will remain popular forever more
Still nagging my boss for a DL380 Gen8 or Gen9
yeah, performance, power saving, iDRAC upgrade which really makes huge difference, all the extra bits and pieces inside and lots of PCIe slots
🙂
never had HP servers, ive heard they are super power hungry
I need a vsphere 7 lab so I can play with kubernetes, vsan and nsx-t
Not more than dell
only had a HP switch and it failed due to overheating after 1.5 year in my loft
For pure router duty I wonder how much a R220 with a i350 t4 pulls at idle
The new NAS I got has PCIe slot - old one doesn’t. I can put a couple of M2 chips in there.
Although afaik e3 v2 and onwards were not huge jumps in efficiency
My x10 supermicro board with a 1220v3 and 32gb ram pulls 22 to 24W at the wall at idle
im thinking about R220 too 🙂 but for HA and other docker containers, so 720 would stay purely as NAS
Sounds like a good plan tbh!
Also not immune from using say a optiplex 7050 as a router
I only got the dell because it was cheaper than a HPE
Have a 7010 now
Otherwise I would have gone for HPE anyday
That aand my switch pull under 20W at idle (24 port zyxel)
$100ish with shipping from the USA to Norway
100 dollars is reasonable
I always manage to find the 200 dollar servers
With 1200 dollar postage 😂
Superdome x?
Most of them are going out of 5 year warranty now
That is the stuff I work with
You should Google the Superdome 9000 too
And the Superdome flex
I am not sure if I could run that at the incomming electric at out appartment complex
Let alone my appartment
46 power supplies rated at 3000W each? :P
only 12
Per chassis
You have your own nuclear power station?
@last cedar that’s how @clear ferry heats his home during winters.
My x10 supermicro board with a 1220v3 and 32gb ram pulls 22 to 24W at the wall at idle
@last cedar ive got some supermicro mobos at work which i need to chuck in the bin, but ive been looking at prices of server enclosures and found out that its cheaper to buy an used server than an ATX server enclosure
dont even remember, havent been in the office for past 6 months
I have 2 "spare" 2U chassis with PSUs
Supermicro🤢
but CPUs of those older gens are cheap as chips
Yeah exactly. I got lucky with my (so far) 2 machines
I think his own nuclear station is how he manages to be so toxic when people mention SD cards or raspberry pi's 🙂
or supermicro in this case
Well if you were hinting that you may end up losing them...@nocturne aspen
I think I am already pretty hated then
I am all of the above hehe
lol
I think his own nuclear station is how he manages to be so toxic when people mention SD cards or raspberry pi's 🙂
@turbid stirrup nah, its Raspberry Pis what is toxic, at least for Home Assistant
I dunno just got one cheap like 5 years ago. Seems solid
But will admit my friends r720 looks like a space ship compared to my boring supermicro stuff
@turbid stirrup but they are great as mqtt gateways all over the house
But the 846 chassis is amazing tho
Not gonna lie
Got mine given, it is in a- condition but nice anyway
Tq backplate. Picked up a 920sq for it the other day
But will admit my friends r720 looks like a space ship compared to my boring supermicro stuff
@last cedar the real fun starts when you open it. R720 is like a japanese car, every single piece is thought through
Gonna make a monster freenas box!
Yepp!
I mean all the dells do
He has some 2950s 710 210 320 520 720 710
@nocturne aspen SD card raid is a gimmick, you still have to shutdown the server to boot the secondary, and reboot to start the mirroring
Cant agree, it's great for esxi. Single industrial card with such OS will last forever and if something happens to it once per two decades you can get your system up in a matter of 15 mins
Which really isn't an issue in 99% of esxi environments because you have enough capacity to withstand multiple host failures ;-)
but engineers time cost money ! 🙂
And with a properly composed environment a reinstall is less than 15 minutes, and if you can't withstand host failures you can run San boot or proper SSD boot
The cost is minimal these days
You still have to shutdown the host to replace the failed SD card, so the downtime will be there anyway
anyway, in my home set up, before 720 ive been using a 512GB SSD (because this was the smallest drive i had) to host a 5GB OS, which was waste of ssd and energy
aand was less redundant than my current setup
I've run esxi in my lab on a 10yo usb stick for over 6 years
It never failed before I retired the environment
i used to have a stick failure on my first server
sticks arent designed to last long
i mean surely there are decent quality sticks out there which are really though, but you can never be sure when buying a new stick how long its gonna last
desnt esxi mostly live in memory?
but with industrial SD cards at least youve got confidence that it was designed to last
@hearty depot indeed it does but obviously it needs to boot up from something (and that disk cannot be used as data partition btw)
Just 2 exis hosts with failover and youre golden 😛
two esxis means double the already huge power consumption unfortunately
Hey i have pull request idea but i'm not sure what category to put it in. Anyone can help?
my install runs of an 4.86€ 16 gig usb 3.1 stick.
@thin terrace Do you mean a feature request? I believe the official channel for those are the forums.
Not a feature request more like change to frontend/code. Right now when you want to edit scene to look what is inside it's automatically applied.
Then this is what you want. https://github.com/home-assistant/frontend #devs_frontend-archived can tell you more.
It's a think I've been noticing too but haven't gotten around to fixing.
I haven't looked into it too carefully, but I'm quite sure it's a frontend thing. In a way the behavior makes sense, but it's too easy to miss-click.
waves hello all. I’m new! New to H.A, new to anything remotely related to coding, and new to using GitHub and such like. I’m very confused about it all, and I’m sure I’ll be asking some very dumb questions before long. ^_^
Hi @grave jay. No worries at all! It's not possible to truly master HA (sorry, in fact theres one person who managed to that and he's called The Tinkerer), so we are all sometimes confused and/or asking dump questions 🙂
Does anyone know the link to the IOS beta app?
See #ios_and_mac-archived 😉
@nocturne aspen thank you! I’ve made some automations already that actually work, so I’m pretty chuffed with that. Other things I need to do some more research on or I’ll jump onto discord to find someone more knowledgeable, which will be just about everyone! Lol
yeah, HA has a whole lot of documentation, just keep trying to do things while refering the docs as you go, and if you will get stuck with something people here are usually very helpful
giant spider just crawled across my doorbell cam, looked like those b rated movies where giant spiders attack lol
Mine just get attacked by seemingly giant birds
@forest edge you should ask @hushed basalt about spiders
@clear ferry lol yea they call it balooning or something, millions of wolf spiders blanket the land in webs https://www.nationalgeographic.com/content/dam/news/2015/05/18/spiderweb2012.ngsversion.1431973603811.adapt.1900.1.jpg
@forest edge B rated ? MPAA came out with a new rating 🤔
you never heard of B rated movies? that's been a saying forever
B roll yes. B rated no. 🤣
B-movies
b movies works too
Bee movies. Got it.
Not to be confused with bee movie which was an a movie
In Hollywood we call it low budget. First time I am coming across these B movies. 😆
@tidal bronze get edumicated! https://en.wikipedia.org/wiki/B_movie
we always called them b rated here
Similar distinction as "AAA" games
I guess 1st time for everything.
such a sheltered life lol
B rated movies are what you put on during a drinking party lol
Ok maestro. Copy that.
Been driving since morning searching for my cracked pepper Spitz.
WTH is going on.
wth indeed
Not a total waste found my rowntrees
@forest edge @tidal bronze doesn't know the term because noone wanted to break it to him for 30 years that he has been only working on b-movies, sharknado is his crowning achievement
You mean 10 years. 🤔
I guess, 38 is old indeed.
You gotta find better memes man. What's up with these out of sync shit ? @clear ferry
@tidal bronze you at one of those oraganic health markets aren't you?
Do you have to ask ? 🤣
you sure this isn't you? https://youtu.be/kpGjeOhhVOI
Check out BLUblox, my favorite evidenced based blue light glasses: https://www.blublox.com/jp
To get 15% off, use the discount code: JP
Wolf Shirt I was wearing - https://amzn.to/2C0X6rW
Healthy habits like exercise, nutrition, and good sleep won’t make you healthy anymore. ...
You have a strange taste for a "guy" 😆
I started watching it cause his wife has a nice rack but stayed cause i'm convvinced you might be red headed lmao
Oh wait that's your most visited YT channel. You posted something the other day as well. Lmao.
Apparently a life coach with dual identity, just your style buddy. @forest edge
I have to watch others with better health than me to stay inspired.. don't judge me!
rainy day, nice day to clean out the garage
@clear ferry you should do that too 😋
🖕
MUSIC FROM PH FAT - http://hyperurl.co/7ielyx
INTRO MUSIC https://soundcloud.com/mickman/tracks
Guess it pays to be an influencer 😆
Well... there's a difference between cost and value...
all that and they got presents for the kids and mom at walmart lol
did that dude use to live in NY then move to ca or does he have a home at both places?
@forest edge you asked about LA, this somewhat sums it up. Lol.
!FOLLOW TARZAN! - https://www.instagram.com/moderntarzan/
Music; MickMan - https://soundcloud.com/mickman/tracks
remix; https://soundcloud.com/gurtybeats
so if you become vegan you move to cali.. got it
This guys edits are mind numbing. Always a treat to watch.
she just said everyone in LA are snobs and you stated that vvideo sums it up lol
@tidal bronze you should move more inland before you get too old. that dude in the video has lived along the coast of 3 different places cause he surfs so unless you spend alot of time surfing you can do without the beach life and just have a decent swimming pool anywhere
and live the rest of my life on biscuits and gravy 😫 🤔
🤣 alot more then that
Well you shit your pants just by looking at anything else. I will be helpless.
she was talking about lack of community and such and I bet even NY dosen't scratch the surface of what real community is lol
just because we all don't like gross bird droppings for dinner dosen't mean others around here feel the same, we have all that crap lol
Lol. Perhaps we don't like community 🤔
snob
Ah ha ha.
I thought about that but can't get my whale on.
maybe eating the same food just raw is the next step?
Talking about food, time to get my brisket started. 😋
have fun with that grit of sand covered meat
Mmmm raw ground meat
Brisket rawks hard
Dumb idea: user color for nabu casa subscribers.
@clear ferry haha stumbled across this as a replacement for the click meme https://www.youtube.com/watch?v=AfKyLMsu7_k&feature=youtu.be&t=77
Shake learns the perils of the Death Mountain Hoedown.
SUBSCRIBE: http://bit.ly/AdultSwimSubscribe
About Aqua Teen Hunger:
Aqua Teen Hunger Force is almost assuredly the first thing that you'd identify with Adult Swim. Watch Master Shake, Meatwad and Frylock deliberately ign...
Seven Fifty
following up on our yday's server discussion
How do you guys back up your ESXi's
ive got four machines on my 720 (HassIO, Ubuntu for docker containers, OMV for storage and WS2016 for BlueIris
i have bought Veeam for backups
but it doesnt really work for me
Ubuntu for docker containers OS has a PCIe passthrough of DVB tuner, OMV has PCIe passthrough of raid controller and WS2016 has PCIe passthrough of Quadro card for encoding acceleration
and Veeam doesnt seem to be able to backup VMs with PCIe passthrough on
This elevator in China shuts down after a boy urinates on the controls.
In CCTV video filmed in Chongqing city on February 23, a boy urinates over the elevator's buttons. Subscribe for more: http://bit.ly/newsflare
The boy appears to be on his tip-toes and at one point arche...
Anyone here using HomeKit together with an Apple TV 3? After it was "unavailable" for weeks I removed and readded my iCloud Account on it, with the result that it's missing from my Home App completly... 😩
Well Saturday my hot tub got delivered
the Costco one?
Is it normal in the US to have flags sticking out of houses, in Australia we don't do that, its very rare to see flags unless at public building (school, oval, hall etc.)?
Only houses with flags here are at birthdays, or national celebration days or when someone dies @rare condor
We do Balloons for Birthdays, Drinks for National days and Funerals for Death
Not so much flags for any of those
Illegal to flag after 10pm and before 8am afaik
why?
I only have my flag out like three days per year ish
Probably have 5 flags in my house, 1 for hanging on the wall and 4 that are only used for the independence day
very common for houses to have flags out front in the US
my father-in-law has a giant flag pole in his front yard, for some reason
We have a flag pole. Normally put the flag up for birthdays and a few special holidays, such as the kings birthday, election day, midsummer and such.
But on my birthday two years ago, my wife dropped the flag line, and we haven't bothered to try to get it back yet.
Kind of embarrasing, really. You're not supposed to have a naked flag pole. When the flag is not up, there should be a pennant instead.
^national disgrace
Swedes are in general
Depends on which nation we're talking about
@last dirge yup, the essex 5 person
@clear ferry of all the things you can say about Sweden the flag is a big plus
@last dirge well, you could refactor that joke to be about any Scandinavian country
🤏
Anyone knowleable how setup the samba on raspbian so I have root acces to HA config folders not trogh addon pls?
@dull plaza how are you running ha? Ask in the proper channel
It is a general question. Not only regarding HA
have you read the title of this channel? @dull plaza
i figured it out so it is closed
🤫
Finally, the capitol has made it mandatory to wear face masks on public transportation
I'm always less annoyed about how the UK government has handled this when I see that it's not unique.
We had that weeks ago, I still can't leave my house and we have less than 5 actives cases a day
The Scottish government has done a better job 😛
Masks for shoppers have been mandatory for ages... but no rules saying shop workers have to wear them.
If someone in a shop is going to pose a risk as a super spreader, is it going to be the person spending 10 minutes there a week and talking to one person at the checkouts or the person spending 40 hours in contact with thousands of people?
Fucking backwards nonsense.
I am surprised how lightly Europe and US in general have dealt with this pandemic
Its been 3 monthes of curfew and no trips outside
lol, just setting up the Travel Time sensor.
Just got my free credit, blown away a little under 50€ in a couple of secconds. lets see where this is going
(in aus)
Yeah. We all saw how bad it was in China and mocked them for their poor job... then proceeded to do a worse job, while China seems back to normal now.
Finally, the capitol has made it mandatory to wear face masks on public transportation
@clear ferry seems silly. aren't the seats already spaced like 20 ft apart?
The ski lift seats? 😄
I was thinking of working on my first ever HASS Integration.
in norway they don't have normal buses, it's more like those miniature kid train rides where each person has their own train car to themselves
there are more
https://pypi.org/project/NHentai-API/
I looked but I couldn't find any integrations for HASS ?
These Libraries are there for the taking
The automation potential is endless
Dim Lights: 20%, play marvin gaye, activate funtime mode
3:16am 🤔 Last I remembered it was 8PM
Narcolepsy is dangerous, you should get that checked out 😉
Usually I sleep better. Last few days been working on project for utility grid that started around 2am-4am so adjusting
(offpeak)
I like that it is in python... "Hey, wanna see my python?"
python..err tentacle
Huh. In the FF VIII remaster Library Girl with Pigtail actually has a pigtail. Game graphics sure have made some advancements in the last 22 years.
Oh, that’s nice. They have this stupid 3x speed function, but it’s disabled during unskippable tutorials.
anyone know the best way to use a spare ras pie to display home assistant on a TV?
really all i care about is it showing a particular lovelace panel... pretty simple really
@upper apex install ras os and load HA in the browser and presto
i guess it would be pertty easy to setup a page refresh every 60secs or something
? no need for a refresh
only issue would be having to hook a keyboard and mouse up every time the pie boots up
well if the HA was restarted and all..
well there are scripts that can solve that lol
guess it would just update when HA came back up.
haha mistakes were made...
silly home depo employees
better yet.. i need my homeassistant to be streamed via a local ULR so i can open it on VLC player on my apple TV
wait the new chromcast are android tv's now?
I have the original thing only does mirroring lol
yeah, lol. I am going to get one, fuck it. my girl just asked me if she could spend $65 a mo on youtube tv, lol
I'm sure it has fancy support for that
oh wait it's just google tv, you can't install apps
it seems to support a lot of the stuff I use
yt, yt tv, netflix, prime, spotify, disney, hulu, hbo
i dont like the cloud. the cloud doesnt like me either
If I had a better private tracker I'd just use that 😛
what tracker?
Do I currently have or would want? lol
Eeh, I pay for YouTube premium to get rid of ads for my daughter and I just cancelled my TV subscription, everything else my freenas downloads for me in 20 minutes whenever I discover a new TV show
@night zodiac if you get that thing confirm if you can install tinycam on it or not
I have youtube premium just so no ads on chromecast ez
I think she bought youtube tv last night
I'll let you know. I couldn't find it on home depot anymore, haha
I've gotten an automation setup to capture a JPG on motion. I will likely be adding other conditions but first I want to put them on a web page and am stumped where to start. Suggestions where to start would be most welcome!
stumped on what your end goal is
Be able to review the images from when motion was detected. Whether it's package delivery or a critter or ...
I have mine set up to send the imagine via smtp to my phone as a mms
there are other #integrations-archived that will allow you to be notified through various means which this topic really belongs there
i'm sorry, couldn't hear you over all the hoops you gotta jump through to accomplsih the same lol
Discord?
That works, I use that (as well as Telegram) for that kind of thing
I have an RGB light that i'd like to flash on / off when the doorbell (zigbee switch) is pressed and then turn off when the door is opened (zigbee door sensor) - what's the best approach?
I was planning for user notification that I can turn on / off but want to store the image even if the notification is off. I also know nothing about webservers but think this is where I need to place the image so it is stored
reminds me that I should fix that cronjob.
Dont know why ansible dont like to be invoked by cron
@waxen solar a automation
@rancid wharf HA itself is a web server... if you store files under www folder, you can access them using web url
well - I did something right then. Does HA have a card or something that I can use to display a folder full? Even better could I use that to delete or move the file?
@hearty depot how do I make the RGB light flash using automation?
cards are front-end, what you need is something backend script that moves/deletes files - you can have scripts show in cards that you can run
@waxen solar probably best in #automations-archived
I have a HACS question. I've seen a couple tutorials about adding new cards from HACS and even some vieo tutorial and after installing lovelace plugins in those videos I've seen people see a "Add to lovelace" button, but I don't see such button
taking it to #automations-archived - cheers
HACS? That'll be an #integrations-archived question 😉
NO HOME ASSISTANT SUPPORT HERE (look at the other channels for that). NO POLITICS OR RELIGION!
BE CIVIL to one another or get BANNED permanently.
Remember when reporting spam to include a screenshot of the spam and the user's handle (eg @spammer#123)
@deft pewter thanks!
now go redirect him to the hacs server mono lol
@night zodiac I'm pretty sure they are just rebranding Android TV to Google TV and doesn't lose functionality in terms of sideloading apps. Also, I have YT TV and enjoy it. It does integrate nicely with Chromecasts and Nest displays
if you can side load apps that be awesome
Any ideas how the new CC or the old one is at streaming the Facebook. So many musicians are using to try to earn while we are locked up
thanks @granite hare
is there a way to stream/render lovelace to a video?
so that it could be streamed to a VLC player?
bascially make it a network stream
🧐
That makes no sense, also the wrong channel
people always trying to reinvent the wheel
So write something better
haha im a pilot, not my cup of tea
Yet, you're able to say things are a joke when done by others 🤔
It's what you said... if you didn't mean it you should have chosen other words 😉
well google cast and CATT never works twice in a row.
@upper apex fixed*
if were being literal here in the lounge
@upper apex this still about being able to see HA on tv using an rpi? https://www.raspberrypi.org/forums/viewtopic.php?t=219952 there are many ways to skin that cat and it's all relativity simple
yes sorta
i have google hub maxs and an apple TV
would love to stream to those
raspi to tv via HDMI is kinda my last hope
can't help you there
no worries thanks for trying
Quick, I have a local guy that has 2 Eufy wired 2k video doorbell for sale cheap. Is there tight integration into HA? I want a self hosted Video doorbell to kick off my HA adventure. Suggestions?
I suggest you ask in #integrations-archived about integrations 🙂
Thanks
https://pypi.org/project/pornhub-api/
@rare condor why not buttplug.io ?
did eufy ever release a rtsp firmware? i thought they were suppose to at one point
fancy HA notification light lol https://youtu.be/m0cj_5DWYjw
This is the start of a Stargate Universe clock I'm building from scratch. Just got the basics up and running so far -- still need to:
- Make an actual clock in the open space in front (there won't be any visible circuit boards)
- Eliminate LED bleed-through around adjacent sy...
"working"
@tidal bronze looks like all your winery's are going up in smoke. may wanna consider forming a fire brigade and go stand guard over your greenies you can't seem to live without lol
When resilvering a zpool, what does issued mean ?
5.55T scanned at 5.15G/s, 3.85T issued at 3.57G/s, 5.55T total
Anyone knows ?
This split is what the new 'issued' number is telling you about. In sequential scrubs and resilvers, 'scanned' is how much metadata and data ZFS has been able to consider and queue up IO for, while 'issued' is how much IO has been actively queued to vdevs. Note that it is not physical IO; instead it is progress through what 'zpool list' reports as ALLOC space, as covered in my entry on ZFS scrub rates and speeds.
Also First, a buffer is filled up (it defaults to 10% of main memory, IIRC) with reads that are to be issued. As it fills up, the larger chunks of contiguous reads are issued in as few passes as possible, to minimize the IOPS needed. Periodically, it also completely flushes the buffer and updates the legacy scrub status variable, so that it can be resumed later if the system shuts down (even on older versions of ZFS).
So i recently got a Amazon Fire Tablet 8 (10th gen). My gf had a code for $15 off and it was on sale for $60, so not bad a deal. Anyway was wondering if anyone had a good guide on how to root it?
They're prittey hard to root.
I think my is a 9th gen - and I had to take it apart to do so
There was a backdoor, but have been fixed with the 2020/05/14 update
https://forum.xda-developers.com/hd8-hd10/orig-development/experimental-software-root-hd-8-hd-10-t3904595 @clear mirage
Just passed a Chevy Tahoe with an American flag on the bonnet and Yosemite Sam on the mudflaps, thought of you @forest edge
pronounced Yo-semite
Bonnet 🤔
So apparently there's no encryption between the tire pressure sensors and the car (at least for most cars)
which therefore means that you can add a passive antenna somewhere around your house to have your current tire pressure in home assistant
what protocol is that Hypfer?
so you can also make a spamming broadcaster in your car and make all the other drivers panic?
it's pretty low power
I guess you could find out the id of your neighbours sensors and send mock tire pressure data
please don't do that
https://github.com/merbanan/rtl_433
features a set of decoders for some TPMS vendors
don't worry I drive a old car, just curious 😄
do these sensors actually use kinetic energy from movement or are there small batteries in there?
afaik they use batteries and need to be replaced after 7-10 years
I did read something about energy harvesting sensors becoming available somewhere in 2010, but that didn't happen apparently? no idea
they should be replaced after every time you put new tires on
and tires are good for 5 years
that's for sensors that are in the valve
some cars just use a system whereby they detect rotational velocity differences using a ring on the wheel hub
doesn't detect actual pressure but detects differences in pressure due to changes in wheel diameter
most of them aren't super accurate. Some vendors are better than others though
hi where can i ask for help on rasp pie hassio installs?
#330990055533576204 @sudden sleet
Not sure which install you're using? If you have system_health enabled you can check Configuration -> Info, or see the following.
-
If you're using HassOS, flashed an image, or booted a VM with an image you're using #330990055533576204
-
If you installed Linux and then ran a script to install HA and have add-ons then you have #330944238910963714
-
If you're running
dockercommands or use a Docker manager and have no add-ons then you have #449717345808547842 -
Finally, if you use
pipto install or upgrade you have #551864459891703809
Having difficulty chosing an install method? See this blog post for guidance.
ty
@weary summit totally going to try this
Just passed a Chevy Tahoe with an American flag on the bonnet and Yosemite Sam on the mudflaps, thought of you @forest edge
@clear ferry you should have asked them if they would sell the mudflaps to you lol
🤫
Hey @clever mortar I see you around here all the time. Just wanted to say thank you for helping so many people!
No worries
I'm paying forward the help that was given to me
And sometimes doing more than just pointing folks at the docs 😛
you either needed answers to quadzillion questions or you are overcompensating a little bit 😄
I've been working in IT for a long long time 😉
One thing I learned a long time ago is that the more you understand about any system the easier it is to work it
Whether that's an operating system, a database, or some big interconnected country spanning monstrosity
One thing I learned a long time ago is that the more you understand about any woman the easier it is to work it
Had to alter it a little 🙂
Well, tech, people, the same logic applies
Similarly, apply the wrong voltage to a human and it too fails to work afterwards
human are more broken by design. there are bugs that can't be solved.
And just like with the tech industry, sexism isn't cool...
yeah mono, I wonder if perhaps application of proper voltage might help fix that problem, too.
One can hope
I'm up for testing that, there's a large enough problem set that we shouldn't run out of test subjects in a hurry
"We're going to need another Timmy!"
missing consistency could be a problem?
We should test that too
And ensure we operate in really small voltage and amperage steps
Yes, 1,499,999.999 V still kills, need to turn it down another 0.001V
Can we have another volunteer please
since when is it possible to configure custom lovelace cards with an editor?
Since #frontend-archived
I love this community.
Sarcasm, snark, and general banter, we have it all - and a few things we're not supposed to have, but we don't talk about those...
curiosity: does anybody here use Sonos gear? I do not currently but it's under consideration.
Yes
Thoughts? I'm looking at the Arc and am mostly just nervous about its complete lack of DTS support. But also anything new that can be integrated with HA is always fun.
I'm loving my Play units, good quality music, integrates well with HA, what's not to love
I may pick up some of the Ikea versions at some point 😄
isn't sono's that brand that just keeps dropping support on stuff making them useless? lol
Well, "keep" is a stretch
I just got a Ikea sonos speaker. lack of connectivity is my main downside. while spotify plays nice, I can't play audiobooks on it with my local player
At least unlike Logitech they don't release stuff and then drop it a year or two later
lol
Yeah, I don't do audiobooks over speakers, that'd be a headset only thing
Yeah my use case would be primarily Plex-driven.
You can play from Plex, though I've never tried
Most of my use is streaming from Spotify (was Google Music, but they're killing that) or a local library (SMB)
That's why I moved to Spotify
It's a pretty good replacement, and I'm actually finding more new stuff now
I went to the opposite extreme and moved to a giant FLAC library and PlexAmp.
The stupid thing is I'll probably keep YT Music anyway because not having ads on YouTube is still worth it 😐
I'm also really liking the fact that my playlist follows me between devices, so if I'm listening in the car then get home the playlist continues
But yeah, all my own music is FLAC on my server
@lethal ice ublock origin (browser) and youtube vanced (android) to get rid of ads
Yeah I know, but then you end up having to set stuff up on every computer, and then there are things like TV apps.
@weary summit #frontend-archived 😉
well the browser addon is needed anyway and the addon should get synced on all your browser installations.
and vanced has other benefits like background play etc
but yeah, my chromecast still shows ads, but I don't use it a lot
I just followed up the idea to play my audiobooks via plex to sonos. But that needs plex pass 😩
Not worth only for that. I use my plex only to serve some friends. I still prefer kodi.
Smarter Shopping, Better Living! Aliexpress.com
Wow
Pfsense box right there
i always need to transfer files between computers but i dont want to authenticate my accounts on the computers in question. does anyone know of a solution that is quick easy and free?
i was thinking maybe like an open source file sharing system that i can host myself
thanks i am checking it out but if its like reslio sync then its not going to be ideal as it requires installing software and sharing keys, etc
i want something where i can just grab a file with no links or anything, something i can do from memory
normally i use a ftp server but looking for something better
looks like sync thing would require installing on the computer
You want computers to sync to each other without installing any software on them? 🤔
no
🧙
ideally i would host my own version of something like mega
i upload the file, it gives me a file ID and then i can go to the other computer and tpye in that ID into the web browser and it downloads the file
For sharing anything though whatever you need something to do the transfer, and it needs to be trusted/accepted by both parties
yeah http would do the transfer
🤦♂️
HTTP is a communication protocol. What's on the other side serving things up in this magical scenario of yours?
i already said i would self host the server
I'm interested to hear how you'll host a server without software.
carefully
that is waht i am asking for a recommendation on, the software
maybe you came in late
didnt see that
owncloud might work thanks
since i will host it myself the links will be something i can rememebr
that might work because didnt HA just add a file manager?
i think i read that in the last change log
if so it will give me an easy web interface to upload the file
id have to research if its possible with nabu casa though as that is what i am using for external access to my HA
ah its just a browser
its ok i will just t hrow owncloud on a vps
if windows had something built in like ubuntu's worm hole i would be golden
i know i can do WSL but the idea here is not installing any new software on the computers that i am getting the file on
that is why i want it to be web based
Windows has had network shares that predates some of the users in here
this isnt on a LAN
and?
i want to be able to get the file from anywhere
Someone should create a way to access resources on a home LAN from the internet.
mono i am not in the mood for your condescending snarky shit today
🤔
profile picture checks out