#the-water-cooler
1 messages · Page 559 of 1
it always comes out perfect
even if I add a little too much or leave out some water, it's always perfect
Yeah I just have a cheap one lol
this is mine
but I don't remember paying that damn much for it
I did not pay that much for it
Anyone use Grafana? Trying to work out why I can only select certain columns (indexed columns?) in the "select" part of the query editor.
MariaDB/MySQL connector.
if I remember correctly there was something "odd" about grafana's syntax
like it doesn't map to ANSI SQL syntax
I haven't looked at it in years
Weird thing is, it just seems to be the query editor itself. Writing the raw SQL works fine.
That's why I feel like it might be restricting selectable columns to the ones that are indexed for some reason.
Even if you try and aggregate.
grafana's apparently been failing silently since I moved to docker
so I can't even look at it 🙂
Hmm, very strange. Not super necessary as there's plenty of Lovelace cards which can achieve similar. Just wanted to toy around now that I have my new solar system setup.
what's a kWh cost where you're at?
23.1c/kWh (AUD) with my provider
@igashu Thank you, I will have a look
With 11.5c/kWh FIT. Looks like my base load (fridge + server + NAS + phantom power) is bang on 300W too.
What's a lot? The charge, the FIT, the base load?
@last dirge what do you think about tomorrow 😀
I don't know man
thinking about setting a sell at 1500
it went nuts after close
it's gotta correct after this, I'd imagine
I think so too. I picked up some last week bumped today.
Too enticing to sit back and watch
LA property has gone up too. Makes little sense to me.
Funny enough Houston TX property has gone up
So many in the market to buy no one is selling.
I do real estate investing and its been blowing my damn mind so far
Same here.
I was totally expecting to eat shit during the pandemic
BTC bumped today
Thankful all my tenants didn't miss a payment.
so far I'm still good on that front too
I invest in development. I dont like the idea of being a landlord
I didn't at start but with management I like it.
I don't like apartments just not worth it gave up few years ago. Houses I like very much.
Finally have homeassistant, zigbee2mqtt, traefik etc on the new server
only took 3 weeks haha
I still need to move NGINX Proxy Manager off HA and onto my network management host. Don't like that access to my other proxies goes away if there's an issue with HA.
Yeah definitely decouple that
And need to move my Unifi controller off my NAS onto that host too come to think of it.
I have a main server, which has a main vm which runs docker which runs traefik
Then I'm going to set up opnsense as well
Have been having some major issues with NPM lately though. Think they introduced a bug in later versions where it wouldn't properly create the config files for each host. Hopefully that's fixed now.
traefik ❤️
traefik looks a little overkill for what I need, and a lot harder to understand than NPM.
Yeah it's not simple
It's stable enough it's just the documentation is pretty crap
Plus they change the names of variables a lot
So a variable key could be
loadbalancer
loadBalancer
loadBalancers
Depending on where you're configuring it, which is a MASSIVE headache
Gotta love optiplex for tool-less
Put in a new intel NIC with zero tools,
Spring loaded case lid, spring loaded pci plates, pop in card, close lid. Same for hard drives, optical drive etc.
Nice
Here , try this:
http://letmegooglethat.com/?q=laksforsen
full lockdown, client cancelled Job and now have to wear hazmat suit around my Mum. Cherry on top, my bed slats broke 😦
But on the bright side went overboard and rebuilt my bed tonight with 90*45mm timber: https://photos.app.goo.gl/yCti232yCoacNh5w9
Heh, overboard?
yes, but it is a Suzuki Swift 😉
Sorry we don't have your dumb 'merican super trucks 😛 https://www.youtube.com/watch?v=JrHDeSMvnt4
THANKS TO CNC MOTORS!
http://instagram.com/cncexotics
https://www.cncexotics.com/
The Ford F-650 is a super truck -- and it's crazy. Today I'm reviewing the Ford F-650, and I'm going to show you around one of the largest pickup trucks in the world. I'm also going to show you ...
@tidal bronze my sell didn't hit :/
You were trying 1500 right ?
Been busy since early morning didn't look at the market today. Peaked at 1429?
Yikes shits correcting like crazy.
Vivint running like crazy
Sunrun + Vivint going to be another big PV
I got a text from my step-dad asking me my email address so he could send me some laptop specs to check. He then emails me a Word document with an embedded picture of a screenshot of the laptop product page in a web browser.
I don't know how much more inconvenient he could have possibly made this
printed the word doc as .pdf
Even that would have been more convenient
couldve taken a screen capture of the word doc and emailed you the .png
remote desktop session for you to view the web page he's looking at
facetimed you his screen showing the screen capture of the word doc
I really wish I was making this up. I cannot even fathom what the logic was here
I've seen that, and worse
It's known as User Syndrome
I took the web page, printed it out, faxed it to Bob, who scanned it in, and embedded it in the Word documented...
I just didn't think anyone in my family was that tech stunted
my parents are always amazed that I can fix computer problems
"how'd you do that?"
"well, I typed what the problem was into google"
ugh. That's the worst. "well tell me what you did so I can do it on my own next time"
I applied decades of experience
(aka I asked somebody else who knows more than I do 😛 )
Oh @rare condor , we have toy cars here also
https://cars.usnews.com/cars-trucks/smallest-cars-on-the-market
hmmm....
lol you think those cars are small they are standard to me or medium. Honda s660 is a small car 😛
No send, only receive
Only send empty packets...
The ping is pretty accurate, I uploaded 4tb and I think my ISP has done something weird to me
SUBSCRIBE to Barcroft Cars: https://goo.gl/vbKSU2
MEASURING in at just 100cm tall - and 99cm wide - the Peel P50 is the world’s smallest car to ever go into production. The three-wheeled microcar was originally made from 1962 to 1965 by the Peel Engineering Company and was li...
oof on the ping
Its pretty normal where I live
hopefully you're not into online gaming
I play turn based games.
I tried a driving game a while a go and it wasn't doable
I managed to get 500ms ping for streaming though but even that was unplayable
What ping do you guys get?
To the start of the internet 1.1.1.1
Nice, not bad ping
Entire family prob on some form of video conferencing
For me I'm uploading 8tb of Server Backups, with Zoom Calls and streaming several cameras
Its hard when everyone is at home
tfw i set up my gocontrol usb stick and then accidentally busted it when moving computers around
so now i have to set up another new one today 😄
poor HUSBZB-1 😢
love that stick. IMO it's a no-brainer for a stick to have both radios
I don't like the idea of a single point of failure for 2 networks
^
I also like having 2 control interfaces
That being said, if you have 2 of them and use one for zwave + one for zigbee and then failover to the other on stick failure, then that may be worthwhile
👋
I dont think that you can have 2 coordinators (at least in the zigbee world )
won't the wavelengh mess themself up ?
i have some issue with zwave beeing on some "very popular" frequency here in europe ...
You mean frequency interference?
yup
This depends on power output and local RF clarity
huh, that's lame. zigbee is on the "popular" freq in the US and zwave is on its own
i can't connect my nanoleaf to wifi, so maybe i have some noise issue
868.42MHz in EU for Z-Wave
908.42MHz in NA for Z-Wave
2.4GHz globally for Zigbee
cough and wifi cough
and microwaves
And Bluetooth 😛
ha to slow
i've bough some of those 10Y zwave stipe for my fridge, i hope they will be more stable than my fibaro door sensor :(
This is why I use Z-Wave. I already have my house flooded with 2.4GHz
I have several AP saturating 2.4ghz, zigbee always stable
you'r lucky
Zigbee typically uses channels 15, 20, and 25 which are untouched by WiFi
i hate when the device just don't shut off and i have to wait for the next pull
This gives a good example of how Zigbee is playing out against WiFi
i alwayse wondered why those where the "recomanded" chanel on wifi ... i need to google it
1, 6, 11
1/6/11 are recommended for wifi because they don't overlap
Do not use any mid channels.
2 hits 1 and 6, etc
WiFi is designed to work with other WiFi AP's by taking turns.
so what's the issue. 900mhz networks is saturated with LORA networks, Voice Networks and CSIRO crap, I always found 900mhz and RF 443mhz very unreliable
900MHz would be Z-Wave's North American Band
I am referring to 850mhz to 950mhz to account for Regions
Well if that entire area is saturated, forget about Z-Wave. Better hope 2.4GHz is relatively soft and clear
Yeah I tried Zwave for a while but living near Uni Campus and RF testing centre, has very unique interference
Also Zwave is non existent in Aus
everything imported from EU/US
wonder what new devices/features Google is going to announce tonight....its that smart home summit thing they are doing in place of I/O and all the other conferences
COVID-19 has made it difficult for us to meet you at I/O, Global Developer Summits, and EMEA Smart Home Summit. Our team does not want to miss the opportunity to connect, and we decided to take things virtual! Join us on July 8, 2020 to hear what's new, and what's coming up fo...
i'm worry that they might push me to use cloud base service ... i will try to resist
wonder what new devices/features Google is going to remove tonight
im going to puke at another google message application
and for sure buy a company
02:55 - 03:00 BST
You know... I think I'll give it a miss...
let me find what that is for me
Intro - Your APAC Assistant Distribution Team
Join us for a welcome and introduction from your EMEA Assistant Distribution Team
So... APAC or EMEA 🤔
i know theres a new android tv device
i just hope they dont decide to reserve a new keyword forcing me to rename a device lol
i wonder if my 1th gen nvidia shield will still get update
nvidia has been pretty good about maintaining all shields in updates
i got 2 2017's here
yea ... but they have so many new "AI based optimisation" that can't run on the old one... i wouldn't be surprized
they havent announced they will stop updating them so i think theyll continue to get updates
i'm trying to get a new on for my bedroom, but shelf are empty everywhere XD
they should have renamed home assistant to HASS with the latest namechange
Google "Hass"
"Hass avocado"
Huh
why everything here have to be about "Hass" ... :P
hass is much easier to type it out and also the name is unique
home assistant is generic
HA is easier to type
^
generic is not good for searching
I've literally never had a problem finding results for "home assistant"
Home Assistant is the first thing to come up when googling it...
but HA mean High availibility ... Well with the boot time now you could call it that
In fact, its: The Website, The Github, The Twitter, The Github Again, Awesome-HA...
At this point its like saying "Windows" is generic
And, given hass means hate in German, it's a really bad name
This is why the project has been moving away
At this point, Google just assumes part of my search will include home assistant
Peanut butter home assistant
Actually thinking about it, Home Assistant isnt generic at all
and that why i can't find anything nice with duck duck go ... google personalisation engine is spooky
My wife

Don’t tell her though
🤣
HATE is an epic name for a project imo
every home assistant device out there lol @mild tapir
even on duckduck go it's the official HA site, then installation docs, the the android app, etc
Like what?
alexa home assistant etc
thats a voice assistant
voice assistant
not a home assistant
anyway it's scientifically proved that I'm right about the name
Actually Alexa is TECHNICALLY called "Virtual Assistant"
i think there is a company somewhere around here that do people home assistant, but it's for elderly or recently hospitized people
We should just call it taco.
it's not tuesday is it ?
I literally cannot find anything else on google called Home Assistant
fuuu ... it's tuesday 
anyone disagreeing with the name change give a source or I win
you have to provide a source for your claim first
wow that is some low tier troll bait. At least put in an attempt smh
i didn't read the forum that much ... but does people dislike the change ?
Ive seen nothing but + feedback myself
i didn't like the fact that docker became the default, but that because i'm a dumb ass :)
Technical Automation Control Overlord
Overlay ?
never lost an internet argument before, wouldn't bet on it
Oh crap, @mild tapir wins
Look how real the hotdogs look
@unreal orbit I havent gotten my shit-tier troll memes in for the month
Does that troll reproduce from its nose?
rofl
@green inlet It made me hungry for a hotdog tbh
didn't have any in years ... and those look burned
i don't think there are good one around here anyway :(
You obviously have never had an oven roasted hotdog.
Probably two times too many
hey when your a teen you eat what your parent give you... and when it's junk food you'r way to exited to think about it
Yea, one of my parents throw down meals was kraft macaroni and cheese with sliced hotdogs. Pretty sure that covers all 5 food groups 🤣
all the herbs and spices
pretty sure my laptop fan is trying to achieve nuclear fusion
at least according to the heat blasting out the side
then fan will achieve fusion with the rest of the case before that :)
I wonder how anyone can claim buying a 868,3mhz based smarthome solution is better than zwave/zigbee hubs. I just did some ranting with someone who claims all hubs are crap, and 868,3 is much better
the capability of 868,3 to just pop in an out of a network is nice, where zwave and zigbee create a mesh that don't like to be broken
and to be far i have tone of issue with zwave, mostly based on the complexity of the proto ... something simpler is usealy more reliable
but would you in 2020 go and buy a 2000usd solution based on 868,3mhz?
probably locked in to their own brand
no, because i don't buy solution that cost 2000usd ... i buy modular.
But i could spend that much in 868,3 if i didn't make the mistake to use zwave for my door and motion sensor
I cant say I had any issues with zwave making me want to go back to the basic tech.
i think there is a world between US zwave and Europe Zwave ...
that I dont know. I use EU zwave
well ... me to and it's realy bad on my side, like i regularely (multiple time a day) get device stuck in one state because the message was drop and they don't re-brodcast (battery device)
and with how sequentialy it behave, i can have up to 10 seconde between my first and last rolling shutter going down
strange. what brand?
fibaro for the device, and aeotec for the usb key (but i've try the rpiz also)
ah fibaro. well the problem with fibaro is they have a lot of issues fixed in firmware
serious issues
even fire hazard issues
that they refuse to release
i ... can't update the firmware ... without a fibaro controler
the RF Frequency differs between the US and the rest of the world for zwave
yeah, if you use a US zwave here you use the GSM network. you will get in trouble
i realy wish they where an integration for rfxcom ... i could use my chacon in home assistant for thing like mosquito plug and xmas light without having to leave theme for meshing
I use 433mhz for chistmas stuff and rfxcom
but home assistant it does not support rolling code if i'm not wrong
that I have no idea with. I just use nexa plugs in 433mhz.
i have one in the mail, i'll try it
RFXtrx433 only support rolling code on somfy I think
but might be different now. a long time since I used it
i'm starting to get mad at nanoleaf ... does anyone have 2 of them not nailed to a wall to do a test for me ? yeaaaa long shot i know :(
my entire career until now i've never had the need for a worksheet reference in a formula to be dynamic, and this formula i found is basically templating for worksheet references: https://exceljet.net/formula/dynamic-worksheet-reference
That's neat. I suppose you can use it to generate the cell reference too?
yeah, you could. in my case the cell reference (actually, range in this case) is the same among the individual worksheets though
between this formula and INDEX(MATCH()) i'm unstoppable
sssssssssssssomebody stop me
No
No
No
Is that traffic in Norway?
It's traffic on a ferry in Norway
🍌 on the dashboard
@mild tapir you deep into fiber right ?
Any recommendations for 1500ft premade Armored Direct Burial cable ?
why the hell do you need a quarter mile of cable?
reasons
why the hell do you need a quarter mile of cable?
@last dirge upcoming project need 6 x 1500ft runs. 🤣
what the hell?
What's weird about that?
fs.com does custom lengths of all their fiber options, including their armored cables.
I've not ordered a half-kilometer long cable from them myself, but their ordering pages do allow that input length for custom cables. They're usually pretty good about quoting any special cables, too.
@glad tinsel thanks.
no prob
Got jokes eh @scenic radish
always
Happy to help!
@last plaza boat ferries are normal here, all along the coast
Cloudy weather but still light outside at 11:38pm
whats going on in the loouunnggeee.
The usual stuff
same, been bingewatching youtube videos.
I’ve been on a boat ferry when I used to live in NJ. That’s 11:30pm and that bright?
The sun never sets in summer
I got a nautical themed pashmina afghan
If it wasn't cloudy it would be in the middle of the sky almost
Are you done driving? Or still driving?
For today, still 4 hour to my final destination but baby needs to sleep, and she gets cranky after more than three hours in the car seat
Done 1400km so far
same
I bet.
@last dirge I would too in the seats of a Tesla, they are shite 
Atleast in the S and X, can't expect them to be any better in the 3
You will break your back if you go in Tesla that long. My mini van is way too comfortable than Tesla.
@clear ferry how long is the ferry ride?
Yeah, I'm honest, the Tesla has some of the worst seats I've ever had
@tidal bronze only 30 minutes for this one
Ferries are pretty boring. Shorter the ride better.
Smoking allowed in certain areas ?
I thought the Tesla was supposed to drive for you? What good is it.
@tidal bronze smoking hasn't been allowed in public places for 15 years or so
Is ferry a public place ? 🤣
Isn't it a very private group of helpless individuals sharing a space for a few ?
I think you mean a yacht
Isn't it a very private group of helpless individuals sharing a space for a few ?
@tidal bronze isnt that most everybody nowdays ?
btw in the sad news Charlie Daniels Died ..... this explains the usa redneck values to a tee
https://www.youtube.com/watch?v=AwvU-4e05Mc
#charliedaniels #charliedanielsband #cdb
Official video for "(What This World Needs Is) A Few More Rednecks from the Simple Man album.
Apple Music: http://smarturl.it/CDB_SimpleMan/applemusic
iTunes: http://smarturl.it/CDB_SimpleMan/itunes
Amazon: http://smarturl.it/CDB_Simpl...
even maybe will help with just plain morals
@tidal bronze Yeah, if you need some high pressure cable I got a few manus to reccomend
Question is, how many fibers you need?
2 or 4
i am sad you dont answer me ..... 😢
Ask and answered buddy. That's the norm now.
huh?
BTW sending you few flacs in a bit.
oh boy 🤯
@tidal bronze Corning honestly.
@tidal bronze i know you can get mqa on vynil what about atmos?
That's what I am looking at @mild tapir
yeah at that length its well worth it
Easiest would be tidel @dull chasm
Oil projects ran corning for a long time under break away water barriers
and they are STILL working
i know that but i will be in a area with sat only internet soon
Oh boy. But why.
country
You should be good with Hughes. Ping times not great but good.
gonna try visat .....everybody out there hates hughes
Just got them installed for a project. 2mb up 70mb down. 50ms ping
datacap or throtlle ?
Of course capped. Didn't check how much.
prooly 50gb or so
I think 20gb I might be wrong.
damn
i been there a few dozen times at least LOL
but i have prolly been to at least 70 percent of all AF bases
green ramp is no fun when outfitting and loading for conflicts/war
ok cool no hurry ....i am prolly fixing to crash ...been up since 2
G'day bit new here. Seems there are a great many very good youtubers that talk home automation and I've subscribed to quite a few but I was wondering if any people here have found any Australian based ones?
Why? They don’t speak English?
If you wait a couple of hours, you’ll see a flood of aussies here.
superhouse tv, he's australian.
I don't actually know how to invite people hahahaha
Nothing wrong with the usa/uk based ones just not all stuff in aussie land is available to use like uk and usa certification etc, ah yeah Jonathan. Thanks!
afaik, if you're in australia, you're not allowed to touch anything AC in the house without 3 engineers present and a permit. 🙂
Nanny states 😛
exactly LOL
Imagine we also have the lowest rate of incidence of electrical fire and electric shock among developed countries because of it though. Plus, we're on 240v here - so potentially more dangerous than 110v, depending on amps.
@remote coyote: If you use Facebook, there's an Aussie & Kiwi automation group with a lot of really clued-in people there. Making their own ESP projects and whatnot.
There's always a silver lining to everything @thick dragon thanks for the info.
Thanks @tough igloo 😉
The Blakadder repository for Tasmota also has filtering by country now too, with heaps of people submitting their configs for AU devices.
There’s a good community forum thread for Aussies too
ooh by electrical standard nice.
And yeah, fair few Aussies here on Discord too, so anything specific holler out and you'll likely get a pretty quick answer 🙂
ah this one https://community.home-assistant.io/t/australia-electrically-certified-hardware/32074?page=10
The Aeotec Z-Wave gear is rock solid. I have a bunch of it and sure it’s expensive, but lightning fast and wires into Clipsal gear perfectly. Just remember that in locations that you don’t want a dimmer, and need switching power more than the dimmer can handle (I can’t remem...
Random question - what's everyone's baseline power load in Watts? Curious to see where I sit at 270W.
490W here, right now.
How many fridges/freezers do you have @lunar sundial? That seems exceedingly high.
I don't have power monitoring yet
1 fridge, 1 freezer, and there's a small little fridge as well
but 500W of that is my NAS and ESXi server in my rack 😛
Methinks you need a more efficient NAS/ESXi host! My 270W is with the NAS and ESXi host.
they're old, a PE2950 and a Old Supermicro chassis X8SIL system
Fair. I've got a Syno DS418 and using an old ex-govt HP desktop (with laptop power supply) as ESXi host.
The PE is dual CPU lol
I have an old 12bay system I may eventually turn up to replicate the NAS 😛
I couldn't justify an actual rack. Only have an 8-port managed switch that daisy chains to unmanaged switches. Plus I'm retro-fitting the CAT6 in a 2-storey townhouse, which is difficult 😛
I havea 2960G in the rack too
i regret not having told the builder to put in conduit for my data runs 😦
walls have fire blocks in them, pain in the ass to run new wire/fiber
Around 1400W here as well
So I'm using the yr integration to get the predicted cloud cover for some automations for my new solar. Unfortunately you can only get prediction results at a static time period in the future (n hrs). What would be the most elegant way to get average of cloud cover over say, a 4 hour period? Am I really gonna have to set up 4 separate sensor entities then a template sensor to average them?
used to be DarkSky would do what you wanted, but they sold out
What's the use case on the automation side?
You can use open weather map and weatherbit as well.
Reminders in the morning for highest potential self consumption (provided other conditions have been met, such as washing machine not run for 40+ hours, dishwasher not run for 30+ hours).
Undersized ?
I can run my upstairs AC unit off my panels most of the day 🙂
I mean, it reminds me in the morning if it's going to be a sunny day and what chores need doing (based on last run time). Want to split it via morning/afternoon, based on predictions across those periods.
interesting
Got it. Yep interesting. So you are on TOU without Net metering?
I don't know what those terms mean 😛
Time of use. 🙂 Not calculated total production Vs Consumption.
Ohh, no I have that. But the best value for money is when you can self-consume. I only get 11c/kWh for generation, but costs 24.9c/kWh for usage.
So want to predict when it will be best to do the chores based on least-used grid energy.
C O N S U M E
Making money is long gone here (LA) now. lol All I want is pay just the subscription and anything over on the production side goes in this bucket 🙂
Wowza
how to lose $600 in a fraction of a second
sold yesterday.
when you place a sell instead of a buy limit
You got out in time.?
I sold at 1374
Fantastic
UAL let me down today....but going to hold on the few.
Did you bite AAL? Looks like will hit 9's
Looks like the met.no API returns a 6-hour forecast in the default API response. Unfortunately the default weather integration appears to use the current conditions, and doesn't expose the forecast - so might need to pull that in via AppDaemon or something.
I used cloud cover sometime ago but was always hit and miss for light control. Went with multiple lux sensors problem solved. You will have to rely on predictions for your use case.
What is the right place to get advice about getting security cameras? Devices or cameras?
#cameras-archived likely.
ty
Depends on which one you think fits this as a singalong
Pudding-TV Android ► https://goo.gl/RwvkWg
Pudding-TV iOS ► https://goo.gl/3TGoPv
Besøk Pudding-shop! Vi har mange kule T-skjorter :)
https://www.puddingshop.no/
Pudding-TV er en YouTube-kanal med barnesanger på norsk. Tanken bak er at barn kan lære samtidig som de har det gø...
It'd be tricky to head bang to that...
Dafuq did i just watched?
Then you should watch this @fading zodiac https://youtu.be/R8V0S3bY94A
Pudding-TV Android ► https://goo.gl/RwvkWg
Pudding-TV iOS ► https://goo.gl/3TGoPv
Pudding-TV Eventyr er en YouTube-kanal med animerte norske folkeeventyr.
Hver uke legger vi ut en ny animasjonsfilm, hovedsaklig fra samlingene til Asbjørnsen og Moe, men også andre eventyr og f...
You'll get the gist of it since you speak Dutch
I don't speak that LOL
Wait, aren't you from the Netherlands?
I love updates and the big lists of things wrong in my config 😦
gotta admit, surprised it took as long as it did for some of the emoji's in the HA arsenal to appear after a certain few got promoted 
Has anyone here also tried OpenHAB? Recently heard about it, read a bit about people’s experiences with it and apparently HASS and OHAB are very similar, tho OHAB may be a bit easier due to the „click and drag“ block automations you can make.
I tried it awhile back, was an attempt to find something that actually worked with the type of smart bulbs that I have. I can't speak for any changes made to it in the last 6 months but I had quickly found out it was easier to modify integrations etc with HA than it was with OHAB so I stuck with HA. @inner lava
I didn't think the "learning curve" with openhab was any easier than HA either imo
course these days HA is even easier than what it was back then
Similar.... "ish"
They're both automation platforms
OH is more "stable" - it changes much more slowly (one release every 6 months ISTR). It also has a lot less integrations.
Hm...
I wonder, has anyone tried to port Blocky or whatever it’s called to HASS yet?
Cause that’d be one hell of a gamechanger for me to ditch NodeRed 😉
Blockly?
Yeah
OH is more "stable" - it changes much more slowly (one release every 6 months ISTR). It also has a lot less integrations.
@clever mortar I do wish HA would slow down a hair sometimes. seems like when i finally upgrade i'm already half a version behind lmao
@forest edge Oh, I agree, but ... 🤷 That's the price for an awesome platform 😄
I just update on a schedule
I don't want to deal with massive fixing of broken stuff by waiting @mild tapir
You mean all the small changes that break your current setup after upgrade?
half of my intergrations are custom so I have to update those manually
rather change a few things here and there than basically rewrite entire blocks lol
one day im gonna get my custom ints into a git server and make it easy to update them.. ugh
buuut that can wait. gotta get my NTP servers running and with NTPsec
Gotta do yer part and donate yer bandwidth to the ntp pool
@last plaza for you
Currently trying to get doom working! Should be done soon.
Inspired by https://www.reddit.com/r/pcmasterrace/comments/hbx72t/if_this_is_not_the_correct_way_to_use_a_64core/
Great picture. Only missing one thing. 🌞
Bought a QI charger here in Norway and it cought fire during the night melting the cover of my phone. So no, its not just ebay chargers that is dangerous
Beautifull!!! @clear ferry
Something happened to the discord app? Anytime I have a pop-up, like to see reactions or delete a post, I can’t get rid of it to get back to the UI.
Bought a QI charger here in Norway and it cought fire during the night melting the cover of my phone. So no, its not just ebay chargers that is dangerous
@late gate pretty sure this is how atx lights his fireplace to keep warm
probably, but a bit frightning as its a charger that is sold in the apple store and the big electronic companies (multi charger)
It took one hour from I plugged it in before half of the charger plate had melted
Niiiiiiiiiiiiiiiiiiiiiiiiiiiiice
See, that's my idea of a nice place
👍👍👍👍👍👍
Submitted an issue to the frontend repo and included this in the issue:
Operating system: Debian 10, Windows 10, Android 10

My favourite triplet of shitstorms
But why no iPhone X?
Because iPhone users don't know Roman numerals probably 
That is beautiful 😄
What would you call a sensor which measures CO2, Temp & Humidity, thinking environment sensor. Bad naming always comes back to haunt me
@clear ferry that’s a killer view!
What would you call a sensor which measures CO2, Temp & Humidity, thinking
environmentsensor. Bad naming always comes back to haunt me
@rare condor a multi-sensor 😝
I settled with Garage Environment Sensor.
CO2 or CO?
CO2 and TVOC
O
Using MOX sensor
O
MOX sensors are pretty inaccurate
O
I worked with them in previous job, we needed to monitor CO2 levels in Building for Shopping Centre. Quite frankly they are accurate enough to create binary warnings but not true CO2 levels as its based on TVOC. It estimates CO2 based on Ions released from heated MOX pad
O
I think @scenic radish is broken
Aren't we all 😢
But I will name my sensor O given your persistence
Nah, I had a date today and saw old friends. Spent all day outside, feel great. Ready for 6 week lockdown 😐
6-week lockdown?
I got lots of supplies and Gym Equipment to maintain health
My house wouldn’t hold 6 weeks of supplies 🤣
Disappointing as we were returning to work, parks opening, schools opening etc.
How many cases?
Some people can't even leave home for food, special workers and Police are getting supplies to them
Total cases in Australia are less than Florida’s daily new cases.
I think that says more about the incompetence of Florida...
We are trying to eliminate it like NZ, we were close until the current spike that's why we are in Full Lockdown again.
Yea, I am not sure what the answer is. Australia’s lockdown is pretty similar to what N.C. is doing. But as soon as lockdown is done, if no vaccine, cases will spike again
Yeah I think eradication is a bit of a pipe dream for any non-island country. Even New Zealand is a bit big to try it
No way that happens is us.
Definitely not
And most of Florida’s cases seem to be 30 somethings. Apparently their death rate is not increasing.
I just hope some kind of standard comes out of this. Hope someone learns something.
illinois has been doing well, so please everyone not from here, stay away
Hi guys, anyone know of a free alternative to google cloud print? maybe something we can host on HA or raspberry Pi
Anyway my date was a Nurse tonight so probs infected 😅
#the-water-cooler-after-dark
I wonder how many babies are conceived during a 6 wee lockdown.
wee
So I work on PLCS at SPSs Sewer Pump Stations, when we open the sewer we have floats we monitor. (Controls High High Alarm i.e. (PUMP now or overflow!). Right now the amount of syringes and pregnancy tests is at an all time high floating on top, at one location it was so bad we could not see the float.
I spent my 23 Birthday at a sewer pump station trying not to gag last week, perks of the job 🙃
ew lol
I believe the correct response is ... you must see some shit
before retirement my dad worked at a water treatment plant
affectionately referred to as "the poop plant"
Total cases in Australia are less than Florida’s daily new cases.
@green inlet thats ‘cause they aren’t testing fast enough 😝
If you don’t test it, there is no number.
mmm...nah. It's because FL is FL
The dumbest part is the less you test the higher your death rate will appear
Right. "We have no covid here, but way more deaths than usual this time of year" 🤦♂️
Florida is Equiv. to Australia's Queensland
I wonder how many babies are conceived during a 6 wee lockdown.
@green inlet I have a name for those babies. Covidians.
If you do it right, they will all speak Chinese automatically 🤣
While there is a potential for another baby boom, I think education and knowledge of contraceptives today compared to ~70 years ago will make it a very minor boom at worst
Plausible.
Are you guys/gals helping the statistic?
By getting tested?
Or by conceiving?
Well your implication did not lead to an inference 😉
We welcome the new "Coronials" who will be born at the end of 2020 and through mid-2021.
Fun fact, Norwegian death tolls overall is down this year, because less people have been mingling overall, so less deaths to flu and common cold
For staticians, they
over those things
i'm almost through all the candy you sent me btw lol
there's a reason i don't buy candy for myself
i have such little self-control with candy
noooooooooooooooooooooo
Anyone watching the Hey Google event?
negative
Nah
I was too caught up in time servers for the past 8 hours over a CRLF <> LF Config Issue.... damn you line endings
Yeah I really need to add these servers to my config management git repo
Let all the auto-fixy-blackmagic I have in place stop me from doing a stupid like this
But ayy, I have TLS 1.3 NTP now. No idea why that needs to have TLS but I wanted it
@last dirge what are your plans for the Mule ?
huh?
Kanye says "“Well my second album is called Late Registration. I got a rap … The other thing is, my campaign is Kanye West YES, not YEP, not YEAH. YES. YES. YES... When I’m president, let’s also have some fun. Let’s get past all the racism conversation, let’s empower people with 40 acres and a mule, let’s give some land, that’s the plan.”
what a goddamned fool
Pretty sure you know what to do with 40 acres but I am confused what to do with the mule.
mules are good at pullin
I read the whole interview early AM. Best day ever.
What an..... interesting person
@tidal bronze 2nd tractor shit still trying to buy 1st truck
https://eternalbox.dev/jukebox_go.html
Pick a song and loop it
Good news ... the year 2020 will not be expanded by one additional second (called a leap second). It will be kept as short as legally possible. https://t.co/q9RFjNJ8Nw https://t.co/BRqE733yvi
411
1224
I was literally setting up a leapfile to prep for the TAI offset and leapsecond init and you had to go post that
great now I RIP'd the hwclock by using smearing.
@strange vapor Why couldnt you have posted that an hour ago D:::::: 
Just updated to 0.112. Amazed by how fast the logbook is now😮
Same. HUGE improvement. The last couple updates have been impressive re perceived performance.
Yea
I'm running HA on a pi3b+. I used to wait 30 seconds for the logbook to load
It's 1 second now
That sunset gets 11 stars in reviews...
but did it set?
But will it blend?
We're gonna need a bigger blender
You are far up enough now that it does not set, the winter is a much better time up there 😄
It tired, and failed...
💯 ☝️
I'd like to experience it, once. Just like I'd like to experience the sun not rising that day, once.
I've done both, the sun not going away really messes with sleeping
I can imagine
Both are probably fun for outsiders
I hate summer here with short nights enough that I'd not want to live somewhere the sun never set
Going out drinking at 2am with the sun still up is... Interesting
Worth watching, even filmed here in this town
no more badnest?
As part of the Works with Google Assistant replacement, the company announced a Device Access program to let third-party “integrate directly with Nest devices.” An upcoming Device Access Console provides a “self-serve console that guides commercial developers through the different project phases.”
2021, 2022, somewhere around there
well it does say 'soon'
Meanwhile, we also get a glimpse at temperature controls in Android 11’s power menu. A sheet slides up after tapping to adjust the temperature, while there are suggestion chips for Heat, Cool, Heat/Cool, and Off.
that's kinda nice htough
Which of the # channels is used to exchange information about interesting devices for Home Assistant? A German company released MQTT switches with Tasmota pre-installed. Where would you post that?
The forum is probably the best place for that
i'd like to mask my mqtt robovac co-ords from the states page, it takes over 30 secs to load each time. is it possible to prevent a certain entity from showing in the states page?

@clear ferry
are rgbw in-wall dimmer switches a thing?
Ignore that, mistake. ~ Carry on
i want to try out circadian_lighting throughout my house but I prefer smart switches to smart bulbs
How would a switch be rgbw?
great question. all i can find that would be similar are LED strip RGBW dimmers like the Zooz Zen31
you mean something like this?
sure, as long as I never have to use that bizarre panel interface and can import it into HA easily
Oh you just want a RGB Capable Controller that mounts in the wall
bingo
Is this for LED Strips or?
Dawg gone it man. I can’t post a picture. Something up with discord?
@mild tapir preferably overhead lighting, though it looks like LED strips would be way easier to implement
Way easier is an understatement
Stuff like this is dead simple tbh
There is also this guy
listen, I didn't sign up for Home Assistant to make things ridiculously easy on myself 😄
how about your wallet
it's busy casting hexes on me
There is stuff like KNX Lighting
https://www.home-assistant.io/integrations/light.knx/
Its pretty in depth
looks like the stuff /r/homelabs are made of
You aint wrong
@green inlet discord hates certain picture formats, though I can't remember which ones off the top of my head
Or if it's over a certain size
Brown cheese?
That looks...so gross
I hope that is what it is supposed to look like. Wife said the ice pack was melted and the cheese was room temp on arrival
ewwwwwwww
yes, brown cheese
w-whats it taste like?
actual tasted pretty good
if you have ever had dulce de leche, the closest thing I can describe it as is dulce de leche cheese
cool. Although I am not sure if I trust someone to ship cheese - especially those pissed off amazon warehouse staff.
Especially when I dont have any idea what it is supposed to look or taste like
lol
If ATX says it looks right, I will try it on waffles
are there paid devs or people working for home assistant?
yeah, I guess what I wanted to ask is if there are people working full time there
yes
nice
Anything else you wanted know?
What's your favorite color?
Thanks for keeping it civil. I realized that’s an open ended question 😝
But you didn't answer 😦
what size are you
fun size?
There is only one size in America. XXXXXXL 😝
i remember me mum telling me about americans having t-shirt sizes with XXXL and more
it was exotic
i think my car is the size of that bed
damn i can take you and car for a ride LOL
@dull chasm I envy you. That is a beautiful truck!!!
thank you
Love the color. I’m sure it is fun riding it.
Got any accessories or attachments or gadgets for it?
385 hp .....electronic locking rear diff .. 4x4 with off road suspension ....
I think john deere green tractor will match?
@dull chasm awesome truck!
thanks
[Confused in Australian]
normal then?
Did you check out the tracks @dull chasm
no sorry been at the damn dealer all day
@tidal bronze dad didnt i talk with ya about a raise in allowance
LMAO
i been good
Never understood the American fascination with pickup trucks
Need to carry many cows in the back on your daily commute?
As a daily driver, me either
i dont commute .... i have a take home unit
Fascination?
As a way to haul stuff when needed, sometimes it’s the best way
Best thing to shop at Costco
no doubt ^^^^ i use the bed close to daily
Although I think SUVs have taken a bunch of the market
buying feed ....going to get fuel for tractors and such ...
Prefer the truck over suv for many things specially Home depot runs.
I mean if you have a farm sure, our farmers often have F150s and such
But I doubt farmers take up 1% of the truck market in the USA
SUVs are crap, I hate them.
Station wagon, ute, or even minivans are way better for carrying stuff
Than SUVs
Can't offroad properly, can't carry cargo properly, can't carry 7 seats properly, shitty compromises all round makes it useless
As long as it's not a tiny vehicle anything is fine for me. 😆
Thinking of getting a Kia Carnival
5 seater isn't going to cut it when a second kid comes along
Especially since our SUV has bugger all boot space (wife's choice not mine)
Lmao.....that whole rant and you own an SUV?
Wife likes SUVs I have no idea why. Specially for 1 person. Lol.
Does anyone know what the last working release of NGINX Proxy Manager was? Been a bug that prevents new SSL certs from being created for 2+ months. Want to move it off my HA install onto my network management VM.
She can have her SUV not my thing.
Look at all that cargo space. In 5 seat mode. mmm
carrying capacity drools
vs SUV
Never looked into capacity since we don't have kids. We rarely drive each other's anyway.
We're a one car household
When my kids were young, my wife promised me that if I bought her a mini van, she would drive it straight off the lot and into a pole. She got a Dodge Durango, which I hated. After that car, she was like, I think I want a mini van. I got the Durango and loved it.
Durango does look nice.
We'll probably get a minivan as a second car
Still have the Durango. So easy to throw an 8x4 sheet of plywood in or just about anything else. It is now 17 years old, taught all of my kids to drive in it, has 230+ miles and still runs like a champ
I want a corvette....not sure why...never liked them when I was younger. I just want one.
Wife's birthday is coming up gotta surprise her. I'm in the market as well for a damn SUV.
Besides gas mileage, I think SUVs are awesome
I don't get it but she loves it. Says the driving position is way better than a car. 😀
And pedestrians
With COVID pretty good deals and rates.
I just wish car manufacturers cared more about aerodynamics
I mean how hard is it to design little things like mini rear spoilers
Never thought about it. She drives maybe 3 or 4 miles a day. I rarely drive at all. Even it's box that'll do. 😆
Makes a huge difference
2/3rds of your fuel consumption on the open road is due to drag
Market here is crazy. Went through the roof. Nobody is selling and tons of buyer's. @rain swift
@hushed basalt didn't ever think about fuel consumption.
Things in motion want to stay in motion
The only reason you can't just drive in a direction, get up to speed and then turn your engine off is because of wind resistance and rolling resistance
@rain swift exactly shit is weird.
There's a reason Prius is so slipperly looking, a lot of their 'fuel saving' features come from being designed aerodynamically not just being a hybrid
But style wins over function for consumer markets every time
I totally agree with your aerodynamics but never really thought about it when buying a car. I am all over it with my RC cars though.
No thank you. 🤣
Lol
I have no idea what the guy was up to
Probably a university student doing his thesis on aerodynamics or something
But the difference would have been a lot
Or a complete nutjob on the internet
🤷♂️
@rain swift , you got to realize that banks just can’t kick you out of your house because you missed one mortgage. Usually 3-6 payments till things start to happen
Yes, be patient. I am also hoping to pickup some investment properties.
I'm pretty happy with my place. Definitely big enough for what we need, and very comfortable to live in. Getting sparky to run some CAT6 on Monday so should be all good then.
Australia I am guessing. They can’t even replace switches
If I was installing smart home stuff at a friends house, would you guys reccomend me installing home assistant there? Idk if its meant to be setup then left alone like that
@green inlet: Yes, Australia - but we can run our own CAT6. I just own a 2-storey town house and need to run the CAT6 in a conduit down the side of it which I can't do myself.
Anything directly connected to AC or DC, you can't touch. Anything else is fine.
@bitter zinc , only if 1) he gave you access and you are willing to take the time to update/troubleshoot 2) he is happy with things as-is and doesn’t care about future stuff.
What??
Yep
Wtf
CPRs promote safety and maintain network integrity through requirements including:
A registered cabler must perform telecommunications, fire, security and data industries cabling.
Cablers must have the right registration for the type of work they are doing: open, restricted or lift registration. For details, see Types of cabling registration.
Work must comply with the Wiring Rules - industry standard AS/CA S009:2013 Installation requirements for customer cabling.
Seems excessive
I'd be pissed if I couldn't even put in a new light switch
Come at me bro
We definitely defintely can't put in new light switches
Or change light fixtures like for like
Goodness
I replaced a bunch of my switches with dimmers, can't imagine paying someone for that
But...I also know what I'm doing and know my limits
Yep hence why when I intend to run RPIs around the house it's cheaper to buy POE hats and use POE ports than it is to run a powerpoint there
A 2 man team of electricians would probably charge you.. $200/hour?
plus 30-50% markup on materials or more
Can you install a patch cord without supervision?
Phew
Any equipment must also be licensed for Australia
So technically that rules out even random rj45 jacks off aliexpress
I know I'll be buying cheap keystone jacks off amazon when I do my house though
No one is ever going to look at the model number of my jacks
Is this generating revenue + keeping standards or just keeping standards.?
Well the 'reasoning' is
Think back to the 80s where 'telecommunications' was purely a telephone
People doing crappy wiring could have it accidently connected to 240v
Or ground it, or use random dodgey telephones
Which would not be nice for the technicians working on the telecoms infrastructure
RING
But yeah it's nanny state really
boom
I’ve been on the wrong side. It’s great fun
So homeowner has no right to open a wall or do anything of that sort ?
How tf does my GSM modem signal strength change so much when it never moves lol
Same cell ID?
Clouds, air pollution, cars driving by, multi-pathing, etc.
Fair, just seems dramatic
Looking at your signal level you must be on the fringe and switching cells.
Yeah, a 30% delta does seem pretty ridiculous.
Pop up engineering mode on your phone and you can double check
Probably quad...I have poor signal throughout my condo, probably because it has concrete ceilings, floors, and exterior wall construction
And brick veneer outside that lol
Can you get a mini cell, or whatever those tiny towers from the carrier are called?
They don't do that anymore right ?
Cell extender? Maybe...I think TMobile discontinued them
Oh, I have no idea. I have never needed one, just read about them somewhere.
They discontinued before LTE
You can also use tasker and get a good idea if you are jumping cells
Sitting in my living room, my phone's signal on LTE is -113 dBm lol
Wowza
"you just get a l'il LTE"
Still won't downgrade to 4g and it holds?
TMO is all about the bottom line that up/down costs money. Lol.
Keep Tedi glued to LTE
Why not go 5G ?
I tested the low band 5G deployment on TMO mind numbing coverage.
Don't wanna get covid
LMAO
Nah, I'm on an OG Pixel XL, no COVID-5G for me
You will be very happy with 5G even on a ventilator
"I'm hanging by a thread, but my cell signal fucking rocks"
5G seems interesting, but I thought it has even less range than 4G because of the wavelength?
Or does TMobile just have a ton of the spectrum
3 bands. Low mid narrow. Vzw went with narrow band to start. TMO went bottom up.
Oh I seeeeeeeeeeee
Ultimately will have all three bands.
Sign up for magenta yet?
I like the low band first. I need sustained coverage not 1.7gb down underneath the damn antenna.
Get that """"free"""" third SIM card?
Not yet because working on a deal and might get the sim for free.
Yeah I'd be interested to see for sure
I ran the test with one plus. Can't wait for the N20
Can you put the modem on a usb extension cable
Get it in a better position and orientation
Yeah, I've got it on an extension in seemingly the best spot
Tbh it just needs a strong enough signal to send out an SMS
The dunder mix was my favorite out of the hard candies @clear ferry
I like the sour on the inside
I'll have to buy you a five kilo pack then @scenic radish

@green inlet it looks just fine

Nothing more frustrating than having something new and shiny to play with, but not being able to.
Solar sitting on my roof, and can't do squat with it until energy provider upgrades my meter 😦
I love how these stores are coming out with all kinds of hand sanitizers and masks in bulk now and they price gouge for it even tho the "big scare" aspect of covid is over so nothing is rushing off the shelfs lol
USA, not even done with wave 1 of covid yet 
Norway, 100% infected so just went meh 

@hushed basalt just left my torrent with planetes open and it finally downloaded it
That repo in itself is not that cool, but if you go to his profile it now shows the same content
It it wrong that I mentally pronounce his user name as ball-lube?
I do bah-loo-oob
I do bah-loob
It it wrong that I mentally pronounce his user name as ball-lube?
@young sigil thou shall be banned forever! 🔨
Classic Jemaine!
My partner and I just finished second season of What We Do In The Shadows. Such a hilarious show.
the vampire show?
Yeah
the energy vampire is the best
Check out the new What We Do in the Shadows Season 1 Episode 1 Clip starring Mark Proksch! Let us know what you think in the comments below.
► Learn more about this show on Rotten Tomatoes: https://www.rottentomatoes.com/tv/what_we_do_in_the_shadows/s01?cmp=RTTV_YouTube_Desc
...
Yeah, easily the best character in there. Not a character who was in the original movie either.
Colin Robinson is my spirit animal
@young sigil thanks for that... it's in my head now
So... APAC or EMEA 🤔






