Two displays via SPI on Blinka?

[runic badger]

Say that I'm trying to write "Tiny" on the CE0 controlled display and "Memex" on the CE1 controlled display. The CE0 display writes "Tiny" and then "Memex". The CE1 display writes just "Memex".

Here's the entire program:

This is on a Raspberry Pi 4

Hmm. This page has a section about using CE0 on RPis that seems relevant.
https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/spi-sensors-devices