No I mean... | adafruit | Page 1

viral willow Jan 19, 2025, 7:35 PM

#

topaz wedge Jan 19, 2025, 7:36 PM

#

Like for instance https://github.com/arduino/ArduinoCore-renesas/blob/main/variants/UNOWIFIR4/variant.cpp

#

line 26, the g_pin_cfg table. You are just going to move those lines around, adding and removing pins, to match your design.

#

you will copy the who UNOFWIFIR4 directory and subdirectories and change things as needed for your board.

viral willow Jan 19, 2025, 7:38 PM

#

Ooooooh

#

So change the environment

#

I just wanted to keep it within my project 😅

topaz wedge Jan 19, 2025, 7:38 PM

#

you are making a new board def by copying and renaming an old one.

#

No, you can't really do that easily, that I know of. You really need to make your own BSP or add something to theirs. For instance, we, adafruit, have our own BSP's. A lot of the boilerplate is copied from the Arduino one.

viral willow Jan 19, 2025, 7:41 PM

#

I'll shuffle my pins and otherwise make my own board def

topaz wedge Jan 19, 2025, 7:41 PM

#

See the posts at the bottom of this page (which has no answer!) for ideas: https://forum.arduino.cc/t/how-to-define-custom-tool-within-json-boards-txt-and-platform-txt/1068438

#

I searched for "custom board" in the arduino forums

viral willow Jan 19, 2025, 7:43 PM

#

https://arduino.stackexchange.com/questions/54484/adding-a-custom-board-to-the-arduino-ide/60660#60660 This sounds promising

Arduino Stack Exchange

Adding a custom board to the Arduino IDE

I would like to know what is the procedure for adding a custom board to the Arduino IDE?

My custom board is similar to the Arduino Zero. Instead of using the ATSAMD21G18, my board is based around ...

#

Alright, thanks for the help!

topaz wedge Jan 19, 2025, 7:45 PM

#

viral willow https://arduino.stackexchange.com/questions/54484/adding-a-custom-board-to-the-a...

that sounds good; I've never done this before. It's not as well explained in official doc as it might be

#No I mean...