#live-broadcast-chat
1 messages ยท Page 139 of 1
โค
@upbeat coral nice!
Sadly, I have stalled since then. ๐ฆ
Blink is step one on every new board for me, @upbeat coral
JMK is so awesome. I wish I was 50 years younger and could meet him
That's very cool @vernal mulch . I still haven't done much with my PyPortal yet.
great job @vernal mulch
FLYNN'S ๐
I'm eventually going to make an astronomical clock and weather station with mine.
Mine is displaying the NASA pic of the day. Except when its an animation
that's a neat use due
Link to the natgeo stuff, and if someone want's a free ROV for research, let me know and I'll guide you.
https://openexplorer.nationalgeographic.com/expedition/isladelcoco/
@gusty wedge that's awesome, thanks for sharing
My Oscars could tell the difference between me and my wife. Thay knew I would feed them so they came to the surface. My wife.... well they ran (swam) from her.
Yay, embroidery!
Great work everyone.
You tube is going haywire
Same here. I'll wait until the new link is posted.
In hot standby for the new link
@vernal mulch I don't think there are really "official" subreddits, but I've heard whispers of an adafruit person posting there. Only rumors though ๐ต
I know streaming happens on platforms other than youtube... is it any better elsewhere?
I lean on Twitch -- it's not the best, but it handles pre-load a lot more gracefully than Youtube live.
I'm strictly Discord and Youtube. ISTJ ya know.
OK, it's done recursing. And I'm done cursing.
I open twitch.tv/adafruit in a tab that's not in the background, and even if the broadcaster is offline, it'll automagically start when streaming begins.
WE ARE LIVE! ASK AN ENGINEER! https://youtu.be/FhzpZH8yhnA
Multistreaming with https://restream.io/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https:/...
INTROVERTS UNITE... Alone ...At home....
Doooooomed!
It's stuck on the replay of Show and Tell.
I'm fond of the Bit Banger one
Is it Halloween again?
It's always Halloween.
OK, here we go.
Had to close the window and restart.
howdy from Seattle!
evening ya'll! ๐
Howdy @torpid wigeon ! Welcome
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
Gotta make a Flash Gordon costume for the doggy one of these years....
๐ Thanks @dim knot for your hard work doing the links.
@muted mesa in tha house! wut wut!
10% off all items in stock code is FiveisAlive expires 9/4/19 @ 11:59pm ET #askanengineer http://www.adafruit.com
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
Adafruit Industries, Unique & fun DIY electronics and kits : Free - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing Ne...
UPS++. USPS....well.....hmm.....ehh... Let's just say there's a box of M3 nuts lost somewhere in the middle of rural PA USPS distro center....
oh geez ๐
@waxen thistle USPS decided to route my PCBs from OSH Park to "third-class" mail which I didn't know existed. Still haven't arrived months later
its been a pretty rapid decline lately...
@wanton dome Oh, my local post office told me about that. It's where they throw it in a corner and "we'll get to it whenever we get to it."
I was told it's sitting in a gaylord on a shipping dock somewhere
I had a recent Amazon UPS order originate in Columbia SC (just up the road) and go to Greensboro NC then Georgia befoer it got to me via usps.
adafruit is live at https://www.twitch.tv/adafruit
I'm glad Adafruit uses UPS. In my locale, FedEx is contracted out to private carriers. Which are notoriously low-quality....leaving a package in the middle of a driveway in the rain, for example. Our UPS carrier is a good friend of the family, we bake him cookies every holiday season. ๐ช
yah, UPS has long-time employees, fedex contracts out many of the services like fedex ground
John Parks has a rad logo!
A friend of mine gets fresh dog food via fed ex overnight and they leave it out in the drive in the sun. By the time he gets home from work, its not so fresh
JP IS just plane Rad
@upbeat coral Your friend might let the fancy dog food company know about that. That's the kind of thing that could lose him as a customer.
They already are loosing him.
He might also get some free replacements sent to him, hopefully with insulation, if the company is smart.
โฑ ๐ฎ @haughty quiver's MakeCode minute was 2min 12sec of illuminating ๐ก relay + accelerometer code! ๐ฎ โฑ
bzzzbpt!
Greg is such a great guy to animals. Saturday we went to dinner and he had to go by local feed store anf get 50 lbs cracked corn to take to nearby duck pond and feed the ducks.
The ducks and geese swarmed him before he even got the feed out.
Leeks.
CircuitPython Organization
[folks, if you like leeks -- check out adafruit's github. shhh. I never said a word. ๐ต ]
A one-color display is a broken display.
@rapid hornet do you remember why we had to use a separate endpoint pair for MSC? I just tried using the same endpoint pair on M0, M4, and nRF, and I get a CIRCUITPY drive on all of them in 5.0.0.
I wonder if it was an ASF3 thing.
@paper peak I remember it not working on one of the SAMDs and I thought @gray valley found that today too.
right, I thought it didn't, but maybe it does after all with current libraries.
Why did I think about Monty Python when PT said "Bring out your hardware!"
Oh yes. Me, too.
@waxen thistle Because that's the correct response
Cheeky.
It's fast!
Pretty nifty.
I feel like it should be trained to say "Mr. Lady Ada"
agreed
hahahaha....ok, that's funny.
Scavenger hunt!
Gordon owns the copyright on his code, so if he doesn't release the code, it's his perrogative.
I actually own a MagicCap device. And a Newton.
@slow spire same here ๐
There are similar toxic and demanding mindsets in almost every industry -- one of my hobbies is photography. I've been bullied to just give reuse and reprint rights to my work. Sometimes you just want to throw in the towel -- and I empathize with those troubles.
Thanks, @open girder for posting that retro MagicCap lecture at Stanford.
yah, that vid was great, i am glad andy is posting a bunch now
@open girder It also captures that moment in some startups when, before MVP is released, everything is being speculated on, if not outright promised.
the movie general magic about them is on hbo, or at least it was too, good watch
I'll check it out!
Likewise
She's gonna blow
I know, I had to turn down the serb werfer
I would love to see an Adafruit IMDB list.
Another beautiful cloud-set
One thing I noticed in Walmart, Target, Hobby Lobby, and other stores -- lots of the "neon" LED signs and displays are available.
10% off all items in stock code is FiveisAlive expires 9/4/19 @ 11:59pm ET #askanengineer http://www.adafruit.com
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
I used to help maintain a site for a firearms mfg that tracked appearances in movies and TV, @waxen thistle actually an interesting project
hi all again
Finding Adafruit tech in tv/movies is definitely a little side project waiting for someone.
good idea, there have a been a good amount of adafruit in tv, movies, streaming lately too
I was actually thinking of films & shows that Adafruit enjoys -- classic scifi, tech documentaries, etc
But appearances of Adafruit products is good too!
oh that too
Product Placement for free!
@waxen thistle #Retro Scifi w/ Adafruit Technologies that would be great ! ๐
good one for kids
Ready for Retro Fun Design ๐
Are you planning to make the TensorFlow Lite demo recognize Adafruit products? Our robot friends could help us find products in TV/movies!
Checking it out now @open girder -- totally loving the suggestions.
CircuitPython 5 Poster https://www.adafruit.com/product/4365
Below the Youtube video still has the CircuitPython 3 print.
yah, gotta figure out to remove that ๐
Pimoroni HDMI 10" IPS LCD Screen Kit - 1024x768 https://www.adafruit.com/product/4337
Pimoroni HDMI 8" IPS LCD Screen Kit - 1024x768 https://www.adafruit.com/product/4338
Make a gorgeous video set up with this high-resolution 10", IPS, 1024x768, plug-n-play HDMI screen kitย with a display driver board that's perfect for building into projects ...
I would even dare to say: When is a #CubeSat @open girder serving as a client / server for makers around the world? Technically possible
Those look pretty nice.
@fallow fractal now ๐ sorta
Adafruit AirLift Bitsy Add-On โ ESP32 WiFi Co-Processor https://www.adafruit.com/product/4363
Give your ItsyBitsy project a lift with the Adafruit AirLift Bitsy Add-On - a daughterboard that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite ...
CircuitPython provides an approachable and logical means of conducting science with hardware. Paired with low-cost hardware shown to work in space, we can en...
Adafruit HalloWing M4 Express https://www.adafruit.com/product/4300
This is Hallowing..this is Hallowing... Hallowing! Hallowing!ย Following up on 2018's most-successful-skull-shaped development board, we UPPED ourย -skull-shaped development ...
Oooo. I sure enjoyed playing with this last year
Nice... I could keep my 3D printed enclosure!
Woah!
Creepy fun!
@open girder What editor do you recomend me for circuitpython, besides Mu?
@open girder Where does that STM32F4 future Feather rank in speed, from your current line (M0, M4), to maybe Teensy 4.0
What is the hardest part of manufacturing your products?
I want to intruduce to my school open source electronics but I don't know how?
I absolutely love the way Lady Ada pops this information out of her head without any effort.
Yep, @upbeat coral . Jumping from individual MCU features to running the business challenges, with no pause.
+1 USB battery packs. Anker makes a solid set of choices, they're affordably priced, and they're much safer for general use than a lipo.
Lipos are awesome, but they require a bit more care and attention ๐
(646) 248-7822
+1 for NiMH, like Eneloop, if they work with CPX. (Do they?)
@slow spire , I know, it's just..... leaves me speechless....
I realy wanna say thank you to LadyAda to intruce me to open source electronics. @open girder
Sometimes on Desk of Lady Ada, you can watch her routing new PCBs, with director commentary.
wooooooooooooooooooooooooooooooooooooooooohooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo!!!
@slow spire Eneloops are so awesome, I don't even look at alkalines anymore.
@maiden tangle I use VS code with Kattni pylintrc file https://learn.adafruit.com/improve-your-code-with-pylint/pylintrc. I like better than mu. The only issue I have with VS Code is the serial monitor is read-only.
Thanks @open girder and good night. ๐
@waxen thistle We've all but stopped using alkalines at work.
Find maker jobs in 3D and CAD, Art, Design, Education, Embedded Development, Engineering, Fabrication, Marketing and Communications, and Web Development
thanks folks!
thanks everyone!
Is it the same zener every week?
(yes)
'night
Tattoos should be allowed in traditional corporate environments. It means you can sit still while getting poked with a needle hundreds of times -- I can't think of a stuffy, traditional meeting that didn't feel just like that ๐
have a great paint brush everyone!
Yes @delicate fractal , luckily for us, QC insures some things never change.
PAINT BRUSH
@open girder Thanks for another awesome evening of shows!
Night all!
I work for a major bank. Roughly half my team has tatoos. I'm in Canada, but in my world, the "stuffy, traditional" office doesn't exist anymore.
@delicate fractal In a bank! That's awesome.
@delicate fractal That's also 99.99999% of tech startups
@upbeat coral ๐
And design firms. ๐
Really the people in suits are the weird ones
And everyone here in San Francisco, for that matter.
Suits are weird!
@slow spire indeed my hometown knows how to keep it weird and casual
Didn't California pass a bill outlawing suits? ๐
Yes, we did.
Someone started complaining about "rights" or some nonsense
B E R K E L E Y
M O U S E
I can't believe I won! ๐ so excited
hallowing m4
yup
Nice. Love the neopixel backlights on that
perfect for Halloween, can;t wait.
we'll also have a live show tonight at 8pm ET ! https://blog.adafruit.com/2019/09/05/hackaday-turns-15-today-live-video-chat-today-at-8pm-et-hackaday-hackadayio-adafruit/
what time is JP's show?
?showtimes
3D Hangouts - 11am ET Wednesdays
Show & Tell - 7:30pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 4pm EST Thursdays
good bot! Thanks @sage aspen ๐
yw
Good afternoon all you wonderful folks!
hi there
Evening all.
Hi there!
Grab an iced coffee folks, it's almost time ๐
Enabling Bleeps (Check)
Enabling Bloops (Check)
Blooping generator is at 100%. I canna give ya any more powah!
@waxen thistle Hot tea, actually.
Which blend?
Dunno. Home brand.
๐ Tea is great 
I normally drink English breakfast but I'm on a budget currently. ๐ต
So, Chinese tea with sugar?
No sugar.
No twitch....
No rain.
No sun
No kidding.
Got plenty o sun in AZ
My favorite is lapsang souchong. Other than being a great name to pronounce, it's the darkest, smokiest tea I've had.
Bit too smoky for my taste.
Not so much here with Dorian hanging around
Normally would be time for iced coffee but the server was on their game at the pancake house this morning. <enthusiastic high-energy vibration>
@turbid elbow Are you referring to the fruit?
No, the hurricane
Iced coffee 24x7x365
@inner spade What you're saying about good coffee resonates ๐
Ah. Dorian not durian.
Oh, and my thought to all those affected by the storm. ๐
Bleeps and bloops are a go!
super!
A-bleepin' and a-bloopin'
Well, bloopingly bleeps y'all!
adafruit is live at https://www.twitch.tv/adafruit
JOHN PARK'S WORKSHOP LIVE 9/5/19 Fish Heads @adafruit @johnedgarpark #adafruit
....that's a giant fish head behind JP?
Hello!
sound levels very good: peaks at about -5db
Audio all good.
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
I've NEVER been disappointed with the value of an Adabox. You absolutely get your money's worth.
Find maker jobs in 3D and CAD, Art, Design, Education, Embedded Development, Engineering, Fabrication, Marketing and Communications, and Web Development
Coupon Code: Walleye ๐
This livestream is fishy...
This puns are making me salty.
Wasn't Walleye the brother on Leave It To Beaver?
Just rinse it off ๐
I wouldn't carp on about it, @waxen thistle
The upcoming makecode minute will have me hook, line, and sinker.
You've taken the bait.
wall-e-ye
MCAGOTW
What the carp is going on here?
Make Code Arcade Game of the Week
Carp chomping?
Starting to down in phish puns
I need to study game design more -- so many of the classic arcade games feature the basic tenants of gameplay.
@signal latch I'll toss you a lifeline...
This bleeps of a baby shark game in making
Speaking of fish puns... the master himself Kip Addotta (Wet Dream) recently passed away.
Wha?
Don't know him.
a regular on Dr. Demento
๐ค
Come join Discord! We have cookies! ๐ช
Always hot in AZ
Mmmm. Cookies.
Hi Frank!
Phish chomping!
Fish heads fish heads rolly polly fish heads eat them up yum!
Safety First Folks!
or codplay
Cosplaice...
fish will have no nose, how does it smell?
I believe John Parks would have panick attack on construction site
High grit sandpaper is a great tool -- 800, 1000, and 1200 grit gives you really fine control over textures.
Are those wire long enough?
And keeping with the fish theme, shark skin can be used as sandpaper.
Lol. A wild skull appears.
Seriously, my two secret weapons are high grit sandpaper + hockey stick tape.
Smooth things can be roughed up gently -- like glossy plastic video game controllers.
And hockey stick tape give you awesome grip texture, even if you're wearing gloves.
Goop . . . that sounds fishy
Well ventilated, like fan blowing on ya!
No AC in 140 degree day, enjoy!
I prefer ethanol
The MonsterMask is only available directly from adafruit.com or can I buy it from a retailer in germany?
@dense marlin Check out adafruit's distributors -- https://www.adafruit.com/distributors
Adafruit Industries, Unique & fun DIY electronics and kits : Hacker Spaces/Distributors Map - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Youn...
Useful link.
And a pro-tip -- if Adafruit is out of stock, check out Digikey or other distributors. There's a real chance they'll have it in stock.
Nothing in Germany. Why is https://www.exp-tech.de not on here?
@haughty quiver Maybe the mask is made of silicone.
@haughty quiver Have you tried inserting the plexi mounting adapter between the lens and the inside of the mask before gluing?
It's a trap (Admiral Ackbar)
that fisheye lens looks really good with the display
@dense marlin I can't speak to that, unfortunately. You can reach out to that company and see if they'll carry the product.
@haughty quiver Thanks for another fun show!
@waxen thistle I looked up, they don't
@dense marlin The only thing I can suggest is reaching out to support@adafruit.com and asking if there are any official distributors that cover Germany.
great show!
Thanks! Great show today!
Thanks! JP
Thanks, @haughty quiver. Stay cool.
A very piscatorial theme today. ๐
Whe nwill the Monster M4sk mounts be available?
What do you mean JP is having sushi tonight? ๐
With some wireframe glasses, it's Mr. Limpet the fish-spy.
@signal latch not sure yet, but we do have the files available if you can get them laser cut yourself, or use as a cutting template.
thanks
@waxen thistle I was wrong, exp-tech is a Distributors but not has all products.
Thank you again @haughty quiver
G'night all.
@dense marlin We distributors have to order the same as users. That means if Adafruit has not on stock we have to wait until they have enough to order. This takes time.
8pm ET! Hackaday turns 15! LIVE! https://youtu.be/kMkgwSLj0Uc
Hackaday turns 15 today, we are going to do a fun live video chat today at 8pm ET with some past and present hackaday folks! https://blog.adafruit.com/2019/0...

Good evening all you wonderful folks!
Hackaday turns 15! LIVE! https://youtu.be/kMkgwSLj0Uc
Hackaday turns 15 today, we are going to do a fun live video chat today at 8pm ET with some past and present hackaday folks! https://blog.adafruit.com/2019/0...
hey @open girder Limor's audio is clipping I think
adafruit is live at https://www.twitch.tv/adafruit
SV Seeker is FREAKING AWESOME.
I think the 3d printer hype peaked right here: https://hackaday.com/2012/06/25/dont-bring-your-3d-printer-to-makerfaire/ ๐คฃ
Thanks for a nice live show! @open girder and hackaday!
Great show
Ya, that was great. Thanks everyone!
?showtimes
3D Hangouts - 11am ET Wednesdays
Show & Tell - 7:30pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 4pm EST Thursdays
I could swear there was a Tuesday show.. Doh..
Is there still a circuit python monday thang?
@tribal jay The CircuitPython Weekly is typically Mondays at 2pmET/11amPT. It's not a show per se, so it's not included in that list. We do record it and post it to YouTube and a podcast, but it's not a live stream.
We hold the meeting in the CircuitPython voice and chat channels on Discord.
Good morning all you wonderful folks!
Good Morning to you @waxen thistle
Morning!
Bleeps and bloops are a go!
Coupon Code: EyeCase
Adafruit Industries, Unique & fun DIY electronics and kits : Free - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing Ne...
Audio ๐
Adafruit Industries, Unique & fun DIY electronics and kits : Same Day - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printin...
Adafruit Industries, Unique & fun DIY electronics and kits : Shipping & Returns - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers ...
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
CircuitPython Organization
howdy
Find maker jobs in 3D and CAD, Art, Design, Education, Embedded Development, Engineering, Fabrication, Marketing and Communications, and Web Development
Adafruit Monster M4SK
https://www.adafruit.com/product/4343
Peep dis! Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK is like the Hallowing but twice as ...
Mini Oval Speaker
https://www.adafruit.com/product/3923
3D Parts Library on GitHub
https://github.com/adafruit/Adafruit_CAD_Parts
Plans on holders for the convex lenses? https://www.adafruit.com/product/3853
@signal latch yes, showing parts in few ๐
Excellent!
Learn guide, code and build photos
https://learn.adafruit.com/monster-mask-case/
And as an added side bonus, this print can be used as a negotiation tactic with Jabba the Hutt: "because he's holding a 3d-printed thermal detonator!"
Don't run that motor too fast, or it'll give up the ghost.
That's a pretty sweet camera -- handheld at night isn't something easily done.
?showtimes
3D Hangouts - 11am ET Wednesdays
Show & Tell - 7:30pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 4pm EST Thursdays
@hard hollow @rocky reef Thanks for another awesome show! ๐
Thanks guys!
thanks for hanging out folks!
What is that blackmagic camera you were using?
(Unless that was actually a camera enchanted with black magic. If so, please point me in the general direction of a recommended druid, mage, warlock, or witch. ๐ฉ )
@waxen thistle with some of the shoots i question if it is enchanted with magic lol
its the 4k version here: https://www.bhphotovideo.com/c/product/1401512-REG/blackmagic_design_pocket_cinema_camera_4k.html
Thanks @rocky reef ๐ท
ok! this starts in 10 mins! Machine Learning with Microcontrollers Hack Chat! JOIN THE HACK CHAT HERE! https://hackaday.io/messages/room/2369 & LIVE video https://youtu.be/EDNaNQjM7Z0
Machine Learning with Microcontrollers Hack Chat! JOIN THE HACK CHAT HERE! https://hackaday.io/messages/room/2369 & LIVE video https://youtu.be/EDNaNQjM7Z0
Gotta Scotch and gonna lurk this one.
Twitch audio good
adafruit is live at https://www.twitch.tv/adafruit
I lied. I said I was lurking, but, can I use my Google AIY Vision setup for this?
Awesome LadyAda. Thanks.
Hi, anyone know of an audio database for tensorflo? i want a microphone in the yard to tell me if someone woofed or meowed
was greeat show. made me realize the lag in YouTube. ๐
thanks!
Good evening all you wonderful folks
Good evening!
Good [insert timezone here] people!
And a good evening to you all
And to kick us off, here are some kittehs:
My alergies just flared up!
Should I provide some ducks instead? ๐
Alergic to feather too. ๐ฆ
Had to stop wearing Fitbit because of silicone/rubber band.
Yea I know, I'm a mess....
I'll see myself out...
LINK TO JOIN AND SHARE YOUR PROJECT - https://streamyard.com/7qzGUDZ2CA
and those of us who just like to watch?
Duewester: I hear ya brother. I canโt wear metal against my skin either. It leaves a green stained blister.
Theyโll post a link in a moment.
@delicate fractal That sounds - unpleasant.
Yep.
WE ARE LIVE! SHOW AND TELL! https://youtu.be/zxStT1C1_iU
To show and share your project at 7:30pm today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join. For best results be...
Yay!
hello hi hey!
Evening @haughty quiver
adafruit is live at https://www.twitch.tv/adafruit
You can get GIFs in a GIF shop...
candy corn is the best!
@haughty quiver Did you have that build on your bucket list? ๐
Ok, that's the creepiest thing I've seen in a while. This is SO cool.
How does it handle sunglasses?
That is some awesome glowing eyeball framing with the sunglasses!
kinda accentuates the cartoonyness with the sunglasses
I absolutely want to make that.
It would look great with a full face, but I guess it would be too big.
Intermission...
Grab some snacks! ๐ฟ ๐ฌ ๐ : 
Does anyone know how to create a new entry in this chat?
So it doesn;t look like my comment is a continuation of the previous line...
WE ARE LIVE 10% off all items in stock code is TripleAxis expires 9/11/19 @ 11:59pm ET #askanengineer https://youtu.be/GRyg4Eo6TPQ & http://www.adafruit.com
Multistreaming with https://restream.io/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https:/...
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
Why is show and tell listed as Ask An Engineer?
Bleeps and bloops are a go!
@lavish patrol If it's YouTube, refresh the page. It sometimes....sticks.
youtuve messes that up, sometimes
Good ol' engineering trick -- turn it off and back on again ๐
Youtube messes up often. ๐ค
๐ถ rolly polly fish heads ๐ถ
Adafruit Industries, Unique & fun DIY electronics and kits : Free - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing Ne...
10% off all items in stock code is TripleAxis expires 9/11/19 @ 11:59pm ET #askanengineer http://www.adafruit.com
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
Adafruit Industries, Unique & fun DIY electronics and kits : Shipping & Returns - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers ...
Adafruit Industries, Unique & fun DIY electronics and kits : Same Day - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printin...
For Halloween? Do they still make Poprocks?
Explorers - Trailer https://www.youtube.com/watch?v=VInNNp40dRo
In their makeshift laboratory, three boys use an amazing discovery and their ingenuity to build their own spaceship and launch themselves on a fantastic inte...
There's a theory that when George Renninger of Wunderlee Candy Company created candy corn in the 1880s, they made a giant batch. It also had a unique side effect -- it never became stale or degraded.
But the original batch barely sold.
So each year, the unsold candy corn is recollected and repackaged. Rumor has it, we're still eating the same original batch of 1880's candy corn to this very day.
/spooky story ๐ป
I do like the candy pumpkins which are made from the same stuff!
I believe it and love it even more now.
I don't know what Candy Corn is. It's probably called something else here in the UK.
candy corn is immortal candy? into it.
adafruit is live at https://www.twitch.tv/adafruit
When I was watching that video earlier I was expecting a jump scare
โฑ
@haughty quiver's MakeCode Minute was 1min 48sec of reading potentiometer input!
โฑ
My stream is about half a minute behind...
@lavish patrol Twitch is about 4 seconds behind for me.
Twitch stream tends to be ahead of YT.
I bet if I refreshed Twitch, I'd probably get that down to 2 or 3 seconds.
(Switching to Twitch...)
(Twitching to switch...)
(Streaming a Switch on Twitch...)
how do ya get ta twitch?
Don't forget your break statements!
Itching to switch to twitch...
It'll go without a hitch.
A snitch name Mitch told me to switch.
1.30 seconds to streamer delay on Twitch after a refresh. That's pretty rad.
Two parallel light beams will light up the sky to represent the fallen skyscrapers as part of the annual Tribute in Light public art installation. RELATED: 1...
Find maker jobs in 3D and CAD, Art, Design, Education, Embedded Development, Engineering, Fabrication, Marketing and Communications, and Web Development
Hi y'all.
Howdy!
that's a lot of trellises. trellii?
that glowing heart was super cool ๐
@lavish patrol Pergola?
Yes Adabox 13 showed up at my door today!
Nice!
Noice.
Cartoon Network Sticker Set for Circuit Playground Express https://www.adafruit.com/product/4329
Clear Acrylics and Hardware Kit for Monster M4sk https://www.adafruit.com/product/4330
Here is the perfect kit for mounting convex lensesย (glassย orย plastic) to yourย Monster M4sk! These acrylics has been laser-cut specifically for lenses with a lip-edge, so ...
Gizmo is out! Yay!
Coming Soon! Machine Learning BrainCraft HAT for Raspberry Pi 4 https://www.adafruit.com/product/4374
Coming soon! Sign up to be notified when we have these in the store!The idea behind the BrainCraft board (stand-alone, and Pi โhatโ) is that youโd be able to โcraft ...
@waxen thistle โฆalmost.
Circuit Playground TFT Gizmo - Bolt-on Display + Audio Amplifier https://www.adafruit.com/product/4367
I can wait ๐
Can it be fed electricity after midnight?
Lol.
@tiny plank You know the answer to that!
next class of daughterboard: thingamagigger. whosywhatsis. and of course waldo.
Got my request for notification in
Chunky watch time!
All the buttons!
โ
Adafruit 8x8 Trellis Feather M4 Acrylic Enclosure + Hardware Kit https://www.adafruit.com/product/4372
Adafruit TLV493D Triple-Axis Magnetometer - STEMMA QT / Qwiic https://www.adafruit.com/product/4366
The TLV493D 3-axis magnetometer is a great little sensor for detecting magnets in 3D. In fact, the manufacturer Infineon suggests it could be used to make a joystick! You could also use it ...
sneak peek at an upcoming Qwiic display...I mean...ssshhh...it's not out yet, don't ask....
10% off all items in stock code is TripleAxis expires 9/11/19 @ 11:59pm ET #askanengineer http://www.adafruit.com
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
whoa
As Teal'c would say: Indeed.
Ooohโฆ Speedy Feather with Stemma
Does the TensorFlow Lite demo require a Bluefruit CPX? Will it work with the regular CPX? Also, I assume the TFT Gizmo will not fit with cases on?
Question: In the Braincraft video you just showed, it looked like the fps was 4+, but on the Machine Learning Monday demo, it was more like 1.5 fps....what was different between the two setups?
A we years(or worse), or just quarters away from seeing adafruit boards with RISC-V?
CPX + Crickit is one of the best combos -- "batteries included", the "hello world" of robotics.
@glossy flicker I think the Monday demo recognized more than one object at a time, which slows down frame rate.
I will probably try it with my new HalloWing then. Thanks!
ooohhh....cool beans....thanks @open girder and @proper trench
Thank you @proper trench and Phil for the mentions on Twitter and the show tonight! I really have a ton of fun making my projects, and it really makes me happy to see them resonate with others. More of my stuff including my current build are over here: https://www.instagram.com/back7.co/
Welcome back to Instagram. Sign in to check out what your friends, family & interests have been capturing & sharing around the world.
But can't you go into the REPL and import your code to inspect variables, etc?
Anker makes a slam-dunk line of USB battery packs of various sizes, capacities, and ports. They're inexpensive, top notch quality, available on Amazon + Walmart.
(646) 248-7822
@waxen thistle These are interesting, since you can tell them not to turn off on low current draw:
https://voltaicsystems.com/v15/
oof. Now I feel old.
Congrats Nichole from OC!
10% off all items in stock code is TripleAxis expires 9/11/19 @ 11:59pm ET #askanengineer http://www.adafruit.com
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
@slow spire This is why I love hanging out here. I find new and interesting toys to inflict pain on my wallet. ๐
Thank you bud.
Lol.
@waxen thistle I also have a box full of PCBs and parts around here somewhere, for building a little circuit that prevents normal USB battery packs from turning off.
My pillow is calling me. Goodnight all, and thanks @open girder.
@open girder Thanks again for another awesome evening of shows!
Night, @lavish patrol ! ๐ค
Bye
Night all!
thanks and g'night all! ๐
Good night everyone
Night, @sage aspen !
Curious if I can use that triple-axis magnetometer to check electric guitar pickups... just ordered one so I guess I'll know pretty soon.
Good day, good people.
Hello!
hi folks!
Buckets of fun today! ๐
It's on my holiday bucket list.
I hope it won't be beyond the pail...
Wondering if candy corn can be purchased by the ear. (preassembled as it were)
Good afternoon all you wonderful people!
Afternoon @waxen thistle
Afternoon
bleeps and bloops -- audio levels are good!
@inner spade I'll be amaized if it wasn't.
adafruit is live at https://www.twitch.tv/adafruit
JOHN PARK'S WORKSHOP LIVE 9/12/19 GIF Candy Bucket @adafruit @johnedgarpark #adafruit
๐ฝ
Find maker jobs in 3D and CAD, Art, Design, Education, Embedded Development, Engineering, Fabrication, Marketing and Communications, and Web Development
Well, that's just corny.
voice audio levels are great!
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
Coupon Code: JuJubes
๐ฅ
so simple!
I would like a purple pickle please
A pickle picker...
๐
Peter Piper...
We do have some sophisticated moments, but I can't recall the last time.
1997 I think.
โ
The only mint that belongs in a halloween bucket is something from a federal mint.
I've taken note of that.
๐
I saw it flying around, but I won't argue with the "looking like a madman" comment ๐
Thanks @haughty quiver
Thanks!
@haughty quiver Thanks again for another bee-utiful show! It really generated a buzz!
Thanks @haughty quiver
Venus if you will send another yellow jacket for me to kill.......
The show had a sting in its tail today. ๐
@lavish patrol stop bugging @haughty quiver
I'll just buzz off then.
@lavish patrol just do not fly off the handle
I'll just wing it.
@lavish patrol you are un-BEE-livable!
I'm part of the Hive mind.
These bee puns are starting to sting
There's been a swarm of jokes.
Should we just let it bee?
It's a honey trap.
Quit pollen my leg
I think we're just droning on now.
To bee or not to bee, that is the question!
K. Time to buzz off. ๐
๐ ๐ ๐ ๐
hi john
Hive everyone, hapbee Friday
Good morning all you wonderful folks!
[Iโll be on mobile today, so I wonโt be able to provide links or zeldas during the broadcast.]
good morning, afternoon and evening folks!
#3DPrinting Live! Episode #250 โ Antenna Eyes and Glowy Cauldrons https://www.youtube.com/adafruit/live #3DHangouts
Multistreaming with https://restream.io/ This weekโs #3DPrinting project on Adafruit Learning System - Antenna Eyes https://learn.adafruit.com/antenna-eyes ...
Greetings all.
howdy howdy!
๐ค
Today's coupon code โanteneyesโ gets you 10% off your order!
#3DPrinting https://www.youtube.com/adafruit/live
Multistreaming with https://restream.io/ This weekโs #3DPrinting project on Adafruit Learning System - Antenna Eyes https://learn.adafruit.com/antenna-eyes ...
Hey y'll
๐
Very cool stuff
Indeed.
This is for people who don't have access to any helium...
Cool glowy cauldron
sweet stuff guys
great show guys
@hard hollow and @rocky reef โ thanks for another awesome show ๐
Thanks, @hard hollow and @rocky reef
love watching you guys, so creative
thanks for hanging out folks!
Is there a link for today's Show and Tell?
@smoky patrol Not yet. It'll be posted here as soon as we're ready to go!
Thanks
Good evening all you wonderful people! 
Good evening!
Good evening
Hey y'll
Hello
LINK TO JOIN AND SHARE YOUR PROJECT - https://streamyard.com/gneuaY5iSJ
WE ARE LIVE! SHOW AND TELL! https://youtu.be/uYsKnwtTTqs
Multistreaming with https://restream.io/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https:/...
Hello, World!
adafruit is live at https://www.twitch.tv/adafruit
Where is the cell phone credit card?
Hi @open girder what is the url to connect ? Thank u ๐
To watch or join?
to join
@dim knot https://www.amazon.com/dp/B01IR5ZNV0
(Not great ratings, but hey, it exists.)
Great show
Who did the TicTacToe game? Will the code be shared?
My son Thomas and I worked on it together. Here's the link to it on Makecode Arcade: https://makecode.com/_R1vakpKvYUq6
Hereโs the playlist for my lights-carrying-messages projects: https://www.youtube.com/playlist?list=PLBB4Hl2loxIdmVpYFdD2Pq8EmfmNkicC9
And one other project I created today for my students: https://www.youtube.com/watch?v=TfAgVWWy39Y
I show and explain the blocks and JavaScript of a Circuit Playground Express musical intrument program. It uses tilt to choose the note, on a five-octave ran...
WE ARE LIVE! ASK AN ENGINEER! https://youtu.be/hdUYWaXifec 10% off all items in stock code is STEMMAsound expires 9/18/19 @ 11:59pm ET #askanengineer http://www.adafruit.com
Multistreaming with https://restream.io/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https:/...
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
Ok, I'm really digging those LED candles.
Ditto!
Adafruit Industries, Unique & fun DIY electronics and kits : Free - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing Ne...
CircuitWithon?
PyDrop?
adafruit is live at https://www.twitch.tv/adafruit
nice, nice, keep em coming
PyDrop, good one @tiny plank ๐
Thank you!
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
I see what you did there, PT
Make faster and easier than ever with MakeCode, code.org CSD, CircuitPython or Arduino!
โฑ
@haughty quiver's MakeCode Minute was 1min 45sec of ambient color pickling! ๐ฅ
โฑ
STM32 support....nice. That makes it easier to run on the upcoming 32blit ๐
Great Scott!
@open girder the Digispark was responsible for getting me back into electronics and leading me to adafruit ๐
PyWhisperer
PhthaloPy -- broad strokes for bluetooth programming
My audio was choppy for that tokyo steam video. Was that my machine? or the stream?
I had that too
The stream, it behaved the same for me.
mine to, so prolly stream
ditto here
USB would be a great excuse for a PowerBoost 2000C
I was hoping PT would talk about this.
Kelowna? I think SG-1 went to a planet of the same name....
oh-ka-nah-gan
The โSโ in โIoTโ stands for Security https://www.youtube.com/watch?v=PmWYTjr_Xso
IoT security isn't rocket science, but a race to market has left a proliferation of insecure, unpatchable devices strewn across the internet. Well-establishe...
โ^NSFW language
Who'll write 2000?
Finally clear skies.
@tired shale i think there was a job there
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
This will not work with Adafruit's case on, right?
correct!
Thanks! I plan on picking one up, but just wanted to know
Snagged two this morning๐
Circuit Playground TFT Gizmo - Bolt-on Display + Audio Amplifier https://www.adafruit.com/product/4367
Extend and expand your Circuit Playground projects with a bolt on TFT Gizmo that lets you add a lovely color display in a sturdy and reliable fashion. This PCB looks just like a round TFT ...
Adafruit + Cartoon Network Cosplay "The Works" Kit https://www.adafruit.com/product/4359
Adafruit + Cartoon Network Cosplay Basics Kit https://www.adafruit.com/product/4358
Adafruit + Cartoon Network Cosplay Introductory Kit https://www.adafruit.com/product/4355
Are you a super Cartoon Network fan and interested in making cosplay and Halloween projectsย with a Circuit Playground Express,ย but overwhelmed with what to buy?ย Here's a ...
Are you interested in making cosplay and Halloween projectsย with a Circuit Playground Express,ย but overwhelmed with what to buy? Better yet, do you love Cartoon Network characters ...
Wish the Gizmo also had a Stemma 4-pin connector...
CPTFT is out of stock.
It was in stock earlier today. I assume they're making a bunch more.
Adafruit 8x8 NeoTrellis Feather M4 Kit Pack https://www.adafruit.com/product/1929
We've upgraded our popular UNTZtrument with a total make-over, and it's been reborn as the NeoTrellis 8x8 Kit pack. This open-source 8x8 Grid Controller Kit with ...
Breadboard Friendly I2C Temperature Sensor - TC74A0 - TC74A0-5.0VAT https://www.adafruit.com/product/4375
JST SH 4-pin Vertical Connector (10-pack) - Qwiic Compatible https://www.adafruit.com/product/4328
Basic Multi-Color Micro SMT Test Hooks (6-pack) https://www.adafruit.com/product/4322
Adafruit STEMMA Speaker - Plug and Play Audio Amplifier https://www.adafruit.com/product/3885
Hey, have you heard the good news? With Adafruit STEMMA boards you can easily and safely plug sensors and devices together, like this Adafruit STEMMA Speaker - Plug and Play Audio Amplifier. ...
Could you chain those together?
Can you use the CPX Bluefruit, TFT Gizmo and Cricket together?
Question: Where can we find the LED flicker candles in the opening video? They're pretty rad ๐
10% off all items in stock code is STEMMAsound expires 9/18/19 @ 11:59pm ET #askanengineer http://www.adafruit.com
Adafruit Industries, Unique & fun DIY electronics and kits : - Tools Gift Certificates Arduino Cables Sensors LEDs Books Breakout Boards Power EL Wire/Tape/Panel Components & Parts LCDs & Displays Wearables Prototyping Raspberry Pi Wireless Young Engineers 3D printing NeoPix...
@open girder Thanks ๐
Lol, Seriously old school keyboard, Lady Ada, I like it. ๐ @open girder
oh pretty
What was your favorite and least favorite course at MIT? Also, any update on the "Edge Badge" that you showed off in the summer?
@ivory kiln The model M is the best keyboard ever of all time
They were really nice to use, I liked the feeling of the keys.
even knockoffs aren't cheap these days
CALL AND WIN (646) 248-7822
You can get an actual Model-M still. The factory has changed hands, but they still make 'em. It's now made by unicomp. https://www.pckeyboard.com/
Crocodile clip
Question: MakeCode on CPX BLE soon?
I chickened out on the call
Thanks @open girder and good night. ๐
Later dudes and dudettes
@open girder Thanks for another awesome evening of shows!
Thanks, @proper trench & PT!
Now that was one seriously, serious gator clip @noble grove
thank you
crocodile clip
Mines coming tomorrow. So excited!
Night all!
'nite everyone! ๐
alligator clips have a different construction
Goodnight everyone
Wednesdays: Kungfu in the park, take my son to Karate, then an evening with adafruit.
Crocodile clips are used in Australia, if memory serves.
Go-o-o-o Night night!
Night y'all!
@delicate fractal Good to know about the Unicomp keyboards. Nothing compares to those capacitive flapper buckling spring switches..
Absolutely! When I found them, I bought 3! (1 for home, 1 for work, 1 for emergencies)
I might be a bit obsessive about it though. MIGHT
About 12 years ago I found a little computer shop down the road that sold refurbished model Ms and bought one. Then everybody at work wanted one.
Not just original switches. Metal bodies.
Thanks for covering Serpente, @open girder ! ๐
3D Hangouts - 11am ET Wednesdays
Show & Tell - 7:30pm ET Wednesdays
Ask an Engineer - 8pm ET Wednesdays
Desk of Ladyada - Random hacker times
John Park's Workshop - 4pm EST Thursdays
2:10 to PJ's show ๐
And you might eat a PBJ? ๐ฅ
So next JP show is JP wearing PJs & eating PBJ?
At next JP meeting; all members must!
New show format: I make and eat a PB&J and have a big glass of milk over the course of 1/2 hour.
Shake crumbs out of my keyboard.
Honestly, I need to make that hand balance thingy ya done
I think I still has pipes
it's great for dips and pike rocks, too.
we use them as prep for things in aerial straps. Like an L-sit to V and then swing back to get your butt over your head.
helps a lot w holding a good pike during roll-ups.
Serious gymnastics there
real gymnasts can probably go from that to manna to a handstand. on the floor : ]
@haughty quiver ๐ I must engage brain before typing ๐
now I kind of feel I need to leave my "PJ" there so that this ride off into the weeds makes sense ๐
great segway into Adafruit's new line of PJ's.. ๐ if JP does his show in PJ's I'm going to die laughing.
hmmm.. I would totally buy some adafruit PJ's with components all over it. Nerd out!
I would too.
@paper schooner All the reason he should!
Do we have time to get into our PJ's ? ๐
Two minutes to go...
Oops, forgot to change out of jeans into pjs
I wonder who will be speaking for who today. This will be interesting.
I'm wearing a cravat. And a cummerbund.
I'm wearing a bit of my croissant in my cummerbund.
Should I take off my top hat?
I want to see more of using the CPE to detect colors.. that was way cool from last night
beeeps!
Bleeps are peaking at about -6db. Excellent.
Subdued bleeps.
I see the dummies have dressed for the occasion.
levels better, peaking at -5db now. Good to go!
The coupon code is not sloppy.
"at Ada-clock" har har
adafruit is live at https://www.twitch.tv/adafruit
JOHN PARK'S WORKSHOP LIVE 9/19/19 Ventriloquist Dummy @adafruit @johnedgarpark #adafruit
Was that Crowley I heard?
hi
A gottle of geer...
A scene from The Twilight Zone, season 5 episode 28, "Caesar and Me" (CBS Productions 1964)
I have different memories with a dummy like this.
They look like Gary Larson glasses.
Lol.
this is great
That the Adaboxes being delivered.
๐
Pain in the neck? More like a pain in the back of the head...
"It was a real pain in the neck to cut a small hole in the skull, easier to cut off the whole back of the skull"
BladeRunner JP 2019
@haughty quiver Channeling his inner Hannibal Lecter. ๐
A nice glass of Chianti...
Well, this has been fun, and only a little creepy. ๐
great show
good work @haughty quiver
creepy show
Thanks, @haughty quiver - another great show.
(climbing out of the uncanny valley now)
Thanks @haughty quiver !
Just got my adabox, woot!
What did I jump into?
Lol.
SEND HELP! THAT WASN'T ME. THAT ENTIRE SHOW WAS SLAPPY IN CONTROL
hahhaaha
I had the impression also.
there is an even bigger JP off screen pulling the strings
It stopped working for me
Good morning all you wonderful people! 
Good morning
And a fine morning tis. Good mornin to you.
Bleeps and bloops are live!
hi folks! good morning, afternoon, evening and night!
#3DPrinting Live Episode #251 โ CPX Lamps and HalloWing Props https://www.youtube.com/adafruit/live #3DHangouts
Multistreaming with https://restream.io/ This weekโs #3DPrinting project on Adafruit Learning System https://learn.adafruit.com/lego-head-lamp-with-audio/ ...
@rocky reef You're a bit quiet compared to Noe (regarding microphone volume).
howdy folks
@calm nebula you are still quiet
Stream softly, but carry a big 3d Printer. ~Teddy Roosevelt
Today's coupon code โinstockโ gets you 10% off your order!
#3DPrinting https://www.youtube.com/adafruit/live
Multistreaming with https://restream.io/ This weekโs #3DPrinting project on Adafruit Learning System https://learn.adafruit.com/lego-head-lamp-with-audio/ ...
CircuitPython Downloads: https://circuitpython.org/
https://www.youtube.com/adafruit/live #3DHangouts
CircuitPython Organization
Multistreaming with https://restream.io/ This weekโs #3DPrinting project on Adafruit Learning System https://learn.adafruit.com/lego-head-lamp-with-audio/ ...
Snap fit CPX case: https://learn.adafruit.com/snap-fit-mount-for-circuit-playground-express
@rocky reef Loud and clear now
There was a brief bit of static when you moved, then success!
$30 a spool of NinjaFlex -- less than the price of a manufactured iPhone case....and you have the rest of the spool of ninjaflex to use! ๐จ
True but the cost of the 3D printer...........
NinjaFlex colors: https://www.adafruit.com/category/783
Edit the Fusion 360 file: https://a360.co/2m5mhRS
Flexible bumper case for the iPhone 11 Pro. Tested in NinjaFlex 85A and Cheetah TPU 95A.
Features raised outlines to keep the screen and cameras from scratching on surfac...
Ok, that's pretty slick ๐
Can someone release the code for the M4 Hallowing that has the eye and blinky leds.. like the product page has?
awesome!
hahaha keep an eye out
That's a nifty eye mechanism indeed.... I might have to check it out.
We are all pupils in this forum.
what was John's last name to search for the code M4 Hallowing code?
found it
@adafruit #HalloWing behavior #1: Heart Beats! โค๏ธโค๏ธ thumpthump https://t.co/5YFfhW2yCK
Thanks for the shout out guys. ๐
Thanks, @hard hollow and @rocky reef ๐
<- jonsampson
Indeed, thanks for an eye-opening show @hard hollow and @rocky reef ! ๐
It's given us some new vision.
thanks for hanging out folks
A pleasure. Thanks to all you who created such a cool board!
The original eye mechanism from the Target bowl -- do you have any resources/inspiration for making similar types of mechanisms? [as someone with no mechanical engineering background asking ๐ ]
Missed it
@waxen thistle Looks like a gimbal.
Hi! Got my CPX Bluefruit to power a tie that can be controlled from the Adafruit Bluefruit app. Rushed it to show this evening. Would it be OK to demo? All seems to be working well.
I've got a Raspberry Pi build to show, I'd like to share tonight as well
Evening all.
@junior niche That would be great to demo! The link to share will be posted here when it's ready to go.
@clear matrix thx. Iโm getting the fam dinner but will scamper upstairs when weโre ready. Thanks!
๐ป
Good evening all you wonderful folks! 
Good evening!
Evening @waxen thistle
Greetings earthlings. Will see you all at the show and tell.
Good evening!
Hey there, everyone!
Evening @odd stream
Good evening
LINK TO JOIN AND SHARE YOUR PROJECT - https://streamyard.com/TcbiDmQx8D
WE ARE LIVE! SHOW AND TELL! https://youtu.be/EgkICd7IFrw
Multistreaming with https://restream.io/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https:/...
Happy Wed all.
Hello
We have liftoff!
Yikes!
Very cool
"Hi, this is your wakeup call. Would you prefer tea or coffee this morning?" ๐
Donny Darko?
adafruit is live at https://www.twitch.tv/adafruit
nice job @junior niche !
Thanks! Tons of photos are over at https://back7.co
Code's pretty basic, but here it is if anyone wants a starting point: https://github.com/gallaugher/PythonSmartTie
I love the tie!!
Great projects everybody!
Night all
ADABOX 013 UNBOXING LIVE! https://youtu.be/1IePYEqy4jw
Multistreaming with https://restream.io/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https:/...
in 2 mins!
w00t!
While we are waiting for AaE, you can check out Limor's friend Jeri Ellsworth kickstarter https://www.kickstarter.com/projects/tiltfive/holographic-tabletop-gaming/
Link points to Show & Tell.
we are a backer!
AND posted on the blog!
congrats to the team at tiltfive for hitting the goal in less than 24 hours!
music is a go
Ahhh, it autoswitched!
My ears!
ADABOX 013 UNBOXING LIVE! https://youtu.be/1IePYEqy4jw
Multistreaming with https://restream.io/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https:/...
๐ ๐
Who is ready for some de-boxing?
MISS OUT ON ADABOX 13? GET A STAND-ALONE BOX NOW! https://www.adafruit.com/product/4281
My adabox came on unboxing day. YAY TIMING!
Mine is supposed to be here tomorrow. ๐
Lol.
yayyyy its time!
We almost needed a bigger box ๐
(I still LOVE that tissue paper)
I always HATE tearing the beautiful paper.
@upbeat coral this is why I go for a boxcutter at the sticker.
.... or that. Why didn't I think of that...
you will get new tissue with each box ๐
I worked in adhesives and tape for 27 years.
ADABOX 013 UNBOXING LIVE! https://youtu.be/1IePYEqy4jw โฆ MISS OUT ON ADABOX 13? GET A STAND-ALONE BOX NOW! https://www.adafruit.com/product/4281
Multistreaming with https://restream.io/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https:/...
BOOP!
I'm OCD about tissue paper. My favorite part of any gift is preserving the tissue paper.
adafruit is live at https://www.twitch.tv/adafruit
I HAVE to use one of the acrylic rings to get one eye to work. ๐ฆ
The MonsterM4SK is one of the nicest designed products I've seen. It's on par with the CircuitPlayground line in terms of "includes everything you need"
Masquerade - paper faces on parade...
@lavish patrol I was just thinking that, and now it's stuck in my head! ๐
@dim wigeon ๐
"Prepare" to take over earth? If one desires to take over Earth, they do not need to "prepare". They merely take.
But what would I know about that... ๐ฝ
Some have said that aliens are already amongst us...
Are we about to be assimilated? ๐
Korgano!
I think we might have already been. By Blinka. ๐
Lol.
Masaka is waking.
That ATSAMD51 seems powerful enough to potentially become a node of Skynet, for that matter...
i love the samd51
sooo powerful
and it overclocks nicely ๐
there's a lot of math going on with 240x240 x 2 pixels
plus also audio distortion
I think the SAMD51 is more powerful than the first six computers I owned put together.
Lol. Mine was 4.77MHz
120mhz .... looks at the old 8088 sitting in the corner, with the Eagle II sitting on top...
I remember taking a tour of the University of Toronto supercomputer (a Cray X-MP, I think) when I was in high school. My iPhone X has more power than it did.
I have an SE/30 that I found in a dumpster
and look at what we can do with low-power hardware like the RPi and SAMD51.
Gavin Free (One of the Slo Mo guys) just did a video with Linux Tech Tips. Gavin has about half an ExaByte of data to contend with...
And the latest RPi -- it's hard to call that "low-power" anymore, it's a beast.
Aha. The lidless eye...
Are we going to get three eyes next year? ๐
lol
it's like those shavers, we're going to add 3 BLADES
I reckon that would look cool if you could put one of them on the end of a Dalek eye stalk. ๐ฎ
i got a year to come up with next years halloween ๐
@proper trench Looking forward to it.
Haha! They could come in powers of two!