split onyx
The car turns at more than 45 degrees when I try to correct the direction of the car, even if I give it the slightest this day, it has an absurd steering wheel and I have already tried to fix it but still nothing, even so I have reduced the maximum and the minimum that It can rotate but the same thing still happens I need help with this
<@&553315866146766850>
outer girder
@split onyx You'll have to change the speed and steering values in the dat file of the vehicle :
Steer_Min is when the vehicle is at "Speed_Max", while Steer_Max is when the vehicle is at 0 Speed
If your vehicle uses the Gear system, you will have to tweak Speed Max so that if fits the actual max speed of your vehicle (make sure the purple speed bar reached the maximum when the vehicle reaches its maximum speed)
Steer_Min should be a low value while Steer_Max should be higher (I am using values around 10 for steer min and 40 for steer max)
split onyx
<@297374828552257536> You'll have to change the speed and steering values in the...
I understand, although the truth is that I have not been able to calculate the issue of speed with the rpms so far, it is getting quite complicated for me. I don't know if you could explain it to me. King, what has been complicated for me is that I want to reach a speed. 150 khp but it doesn't reach me and I've tried but nothing always leaves me with one step wrong but I don't know which one it is since according to me all the steps look good on me
150 kph - 41.6667 - 41.6
wheel circumference 3,77 M
Distance traveled by the vehicle in minutes 2.496
outer girder
If Speed_Max is too high (higher than the actual Maximum Speed), you will oversteer at the actual Maximum Speed
outer girder
raise the gear ratio of the last gear if you cannot reach the speed you want
