#💻tech-support
1 messages · Page 66 of 1
Amen to that. Did you make that better weapon names, if so try and put that folder somewhere else and try
yeah i deleted the whole folder
i just restored it when i found out it didnt work
I'd recommend testing out the mods in groups and see which ones dont work and work, EX: move the right side to a new folder and switch every test
to much work, ill just wait for all the mods to get updated for compatibility👍
I'll see and look for the bugs
Did you get corrupt files error or did you download mods?
try and verify intregity and well try to work this on
Create post in https://discord.com/channels/310075021882294272/1265712033295372473 and attach crashlogs from %LocalAppData%\ReadyOrNot\Saved\Crashes
Paks folder
is it normal that ready or not uses 80% cpu?
i dont have anything inside only paks pakchunk
What is your cpu
i3 12100f
what the problem
It runs bad on low specs
Yeap, 80% is normal for this cpu
and i have packchunk from 0 to 20
fym low specs. its i3 12th gen its budget cpu plus i have rtx 3050
nvm fixed my issue
Yea I run low spec gaming I get up to 70 fps and have my cpu cranking it's engine like a work horse, you'll be fine untill the next update (tomorrow)
Is there an official announcement for the update?
People were talking about it throughout discord yesterday but i'm not really sure if there is a official update
Yeah, saw a few mention a Friday update but wondering if anyone from void confirmed it
same
but if they don't update it, many fans that are encountering problems will not be happy
Kaminsky works for Void. Yesterday he said they were very aware of the performance issues and the staff were working hard on it.
thank god
Just saw his recent post in the general forum. He confirmed Friday.
This friday or next friday?
So AI Alpha has 4 invisible items taking up slots
No ammo or deployables and it says 4/13 or 4 out of 11
So its restricting what he can take. Anyone have the same issues?
If you had loadout mods, they will break loadouts once you remove those mods, so perhaps ?
My keybinds got cleareddd
rebind them then
Ah yes the ENTIRE 50+ something bind 😭 after the update
Oh wow, I just changed 2 bings and I was fine, BUT DAMN
the void has stolen your past, you must move on
Unironically hardest line I heard all day
%LOCALAPPDATA%\ReadyOrNot\Saved\Config..
It should be in the other directory than the "Windows" one since it got switched when they upgraded UE4 to UE5.
On the missions it says "unresolved" even tho i played them... why does this happen? on the first mission it shows S because i S ranked it, is it only S rank?
I lost all my content. dls remained ok. but I don't want to go through everything again to unlock all the clothes, what can I do?
m8 now my game says that it has corrupted game files tf
Download this if you want to unlock everything https://www.nexusmods.com/readyornot/mods/3138 (place in paks folder)
Delete your mods if you have it
Check out my performance improvement guide: https://steamcommunity.com/sharedfiles/filedetails/?id=3296504692 Tested and working fine.
Flashbangs freeze the game now lol (taken earlier today)
alright
Were you engaging AI prior to this?
There seems to be an issue with frame generation. Enabling it causes my FPS to drop from 140 to 80
my mods wont work
what are your specs and settings
25 slots and some other mods i added bf the new update wont work
I was able to arrest one civilian, then i banged and cleared the next room then my game froze
For me, it's everytime I engage with AI
Game is broken
Yea, it is
😦
AMD 5800X Nvidia 4090, WQHD screen, all settings to ultra except motion blur turned off, DLSS set to DLAA (changing it doesn't fix the issue)
Same thing happens to when i get into it with a suspect
all my progress is gone
Happened to everyone
delete em
Why i have 8gb full vram on low textures? VOID????? That problem from release 🙂
use updated versions from nexus
i did and restaled them
They switched from UE4 to UE5, so there is performance issues, beware of crashes mid game
go to nexus and download mods that are version 1.1
Did you back up your save files?
You have 2 options. Either put dlss to Quality and be okay with the performance or if you are wanting a larger boost by being able to actually apply upscale below Quality mode use the fix pinned on steam. It will use the default built in upscaler though and you will have to disable dlss / FSR for it to work. https://steamcommunity.com/app/1144200/discussions/0/4515505814156131770/
There is no way to this, it's deleted ultimately
idk i recently bought ready or not
This is why I always back up my game and always tell other to.
or just wait until friday until they patch the game
yea
Yeah I don't really mind since I have 100+FPS, I'm just finding it strange that frame gen doesn't work as intended
i only have 52 hours of play time on it
I need help, whenever i want to start the game it freezes when it's fully load to 100%, i can't move my mouse nor leave with Alt + F4 only with task manager
Well,now you know
It looks like Vram Leak is causing my RAM consumption to increase dramatically. 32 GB RAM saves me from crashes
they will push out a fix. For now you can use my fix on steam and for example bump the resolution scale down and you can get a large boost.
ik mine takes longer to load but after a 1 it will
hope the update didnt mess up the game its so fun
i like the intense pressor of going in barricaded suspects
you can set sg.ResolutionQuality=50 for performance or sg.ResolutionQuality=58 for balanced or sg.ResolutionQuality=67 for quality
try the balanced for your 4090
i bet it will boost it a bit
On the missions it says "unresolved" even tho i played them
Is 23 megabytes unscorable now or what happened? for some reason it lost my previous score, i decided do redo it, done it for A+ and it sill sitting as unresolved
new bug or what is happening?
It did. The performance is horrible.
I went from 120+ FPS on max setting to 30+ FPS on any settings.
try dlss/fsr?
they are working on a patch, what is your specs and settings
Does everyone experience random FPS? I sometimes get 90+ fps on this map, but sometimes as soon as I load the fps is 40.
Not home rn, I can send later, but it is no use. I tried everything, pins, Google, YouTube. I am not denying, that I might be an idiot and missing something.
@flint sleet They updated gunfighter check it out and see if it'll work
my fix pinned on steam works 100%
Oh yeah, I saw your video on YT. I was wondering, where I saw your name, lol. Unfortunately, It did not help me much. It did add some FPS, thank you, but still ass.
aight
DLSS Frame generation not available despite me using a RTX GPU
You have 4000 rtx?
Unfortunately no, it's a 3050 so I guess that was the reason
Yeap
Damn
still dosnt work
Why is it like this in the game?
If you want to complete missions with Rank S, you have to play on gas so that you don't kill or injure anyone, friend or foe (that's fine so far).
Now you take the NPCs' ammunition out of the barrel. BUT they keep trying to shoot with the empty pistol and sometimes die as a result. It can't be that difficult to program something like that.
BUT why can you just put the pistol down?
That you can't equip a pistol, just an empty slot.
Or that you could have a gas pistol, that would be nice too. That would also solve the problem.
guys why is it remain unresolved?!
Yup, all maps really it’s just all over the place, I could be staring at a wall and it drops so not sure what causes it
DW bro, I get only 9-15fps
what's your specs
help please. Steralization Erorr
Corrupt data found, please verify your installation. I've verified i and still issue
delete mods
oh
r the mods broken with newupdate?
they are incompatible with UE5
they worked before the update
You need versions 1.1 mods and nexus mods
theyre from nexus
they dont work with 1.1
You should only have from 0-20.paks
the rest r my mods
delete the rest and you can install the new mods
also anyone else happens to have issue that AI CS just don't work? they throw grenade but no smoke ever come out
now my RoN isnt loading aaaa
If you get the corruption error that means the mods don't work, to know what mod works, they must be version 1.1 and either be uploaded or updated today or since the recent update
Check the page for each mod on Nexus mods website. It shows when they were last updated. If date is before the new update came out, the mod won't work
Thanks.
ive just loaded in and if i press d for example i lean to right what have i done
How do i know if my mods support the new version?
why all my progress, cosmetics and config preferences were reseted???????? I launched it in safe mode, pls help
hi guys why when i subcribe to mods via the ingame mods page , and restart the game it doesnt shows on my character customisation, for example a gun mod doesnt show in my loadout page.
It doesnt work
Just answered this. See my last message above
The void has ripped your files and made you a new
also use nexus, make sure to use versions 1.1 not 1.0 mods
my pc fans are going crazy since the update, like i think my temps are higher now, anyone have the same thing happening?
I have the same thing only on dx11, on dx12, fps can drop randomly forever in any places.
Odd, I have it on 12 but on 11 I’m not even getting high FPS to begin with
Anyone having an issue where in commander mode you complete a mission with an A grade and it still shows as unresolved?
Didnt try that but for me, first 8 missions I got S rank and that is still there, 1 or 2 missions are on A+ and the rest that I got lower score is unresolved
I think its not intended to be that way but I was wondering if there was a time table on that for a resolution
Which DX? 11 or 12?
dx11
Which driver and graphic card? also, did you already tried at DX12? also be sure to not have any mod outdated, it could drastic affect your fps and cause crashs.
What did you think of the transition from UE4 to UE5, I would like to know your onion on this.
guys when i complete a mission with B and i go back to headquater, it still says it is uncompleted
I have been unable to play the game for like 2 months, it will load up and I can walk around the headquarters but when I go to shoot or throw a flashbang it freezes and says I am out of VRAM. But there is no way. I even put the game on the lowest settings and it said the same thing.
Where did they announce they were working on a patch to fix the frame issues?
Post basic specifications of your PC.
I have reinstalled the game but this shows up, I already verified the game files, how can I fix this?
Perfect, thank you
deelete mod datas in packs folder
i did rn
i9, 4080, 32gb RAM
every data? had the same till i deleted one specific pak data
I have deleted the mod paks i had
missions is not working beacuse devs add new dlc
-
Right click the game on Steam, click "manage", then open local files
-
Click and open ReadyorNot > Content > Paks
-
There are 21 core files with "windowsnoeditor" 0-20, do not touch these.
-
Delete anything (including the mod.io folder) that is not one of the 21 files.
-
Verify the game files
-
Launch the game
DELETE NEW DLC
I do like onion rings, haha.
To clarify, I will be talking as Alan, not Void.
There is a lot more we can do using UE5, making our life as dev easier to create new stuffs / improve our game etc...
So what do I think? It's challenging, but it is the best option in the long run.
Amen to that🙏
this is tech support not tinder
1920 x 1080 60Hz
8 bit
RAM 8Gb
SSD
256GB of storage
Graphics card AMD Radeon Graphics
DELETE NEW DLC

This new DLC breaks the game
what's your CPU & GPU?
Where do I find those?(I'm not big of a expert on Windows 11)
settings or task manager
Which i9 ?
Since you have amd you can view on the tune tab
or performance tab*
14900 KF
and why does it not save when i complete a mission in commander mode?
you can also view if you search device manager on windows and search for display adapter and processors
Thought of it
Your CPU is unstable.
https://youtu.be/OVdmK1UGzGs
and this should fix it right?
If you are encountering a corrupt files error then yes
it's just ready or not that does this though
Watch the video, really.
Or read any number of articles about it spanning half a year now
I have seen stuff about it, but like why do other games work at max settings but ready or not can't do it.
Why is Minecraft server crashing i9-14900K in W-series board with 125W limit ? It's unstable because it runs high vltages which is causing silicon degradation on top of having copper via oxidations for older SKUs.
Watch the video.
Bro i get it, but it's just ready or not for me. thanks
It's not just ron, all games on ue4/5 will do the same thing
I just don't have issues with my other games on ue4 or 5 is the thing
I can't find it but if these are what Ur trying to find then GPU - AMD Radeon(TM) graphics , CPU - AMD Ryzen 3 5300U with Radeon Graphics
There is no connection between game engine and the CPUs being unstable @scarlet narwhal
It's unstable under load, period.
You still have no idea what the issue is, watch the video.
Your CPU is degrading under your own hands, it will eventually start crashing more and more stuff on your PC.
will do thanks!
Do you have a GPU?
DX12 translate to Vulkan
Also if you don't have a GPU, that's what's problem causing the frame rate problem
on the chance it isn't this do you know of any fix to try?
By the way, why didn't you implement the native Vulkan. He's just solving the problem with statters. I've never had statters. I advise those who have statters to try it. dxvk
This frustrates me to no end..
Please do watch the video so you can understand what the issue is and what Intel is doing about it.
Because Vulkan is worse in certain aspects than DX12 and the thing you are trying to say is already implemented, it was the main advertised reason why they migrated to UE5 👍
likewise, this frustrates me to no end. I watched it, I get what it says. Let's pretend that isn't the issue, do you know or anyone else here know what to try. You just telling me my pc is doomed is not going to help me try and play the game.
no it doesn't work, use mods from nexus and make sure it is version 1.1
oh ok thx
I came here to see if I get could help on the issue with the game, since it is just RON for me that won't work, I didn't come here be told my pc is just gonna die. for you to get frustrated with me, right back at you, i just want to know if there is practically something i can try, if anyone else has had this issue, what did they do, etc. Honestly no interested in just learning that I might as well throw my pc out the window or go buy a new processor
Many complain about statters, it looks like caching is not working properly
And the vulkan is no worse than DX12, everything you say is empty words
can it be version 1.4?
or only 1.1
There were never just a shader stutters, the game had more issues that caused micro stuttering or freezing and it still has some.
Whether PSO caching works correctly is not related to RHI, it's the devs responsibility to make it work.
I dont think there is a version 1.4 cause the game is version 1.1
Vulkan doesn't have DXGI, so you just shot yourself in your own foot.
So yea I just looked, just make sure to download up to date mods that are new since yesterday
You don't seem to know what you're talking about.
whoops wrong channel
Well your PC is doomed till this gets fixed by Intel, it will keep degrading no matter of what you do, so you finally understand the issue 🤞
There are bunch of workarounds, part of which is updating UEFI to latest and running Intel Baseline power profile.
If that doesn't work use the 125W cap with no extra PL1/2/3/4 limit extensions.
If that doesn't work cap max core clock multiplayer to a lower value
Etc.
There are no real fixes other than fidling with voltages and hard-capping them till Intel releases microcode update with more reasonable VID table.
look i don't have issue with anything else except this game.. regardless i know this has to be an issue with other people and just wanted to see what others were doing so I am glad I know I won't have a functioning pc soon. THANKS!
I will ask this question again later and see if someone can assist thanks for the input
That is an ultra-portable battery-optimized SoC and is by default below minimum hardware requirements.
Were you able to play the game before at all ?
if so, you were probably using FSR or resolution scale slider, which currently do not work (fix incoming from the devs soon™).
pls hotfix add back in gamepad detection
me and my friend did way out west in multiplayer both using the same kit even the same outfits and styles not that it matters, and I got the achievement on completion and he didn't, tactical shield, and magnum, no ammo in any other guns, and no nades taser nothing, did it just bug?
anyone know how to fix when a attechement gets stuck on a gun
How to update the game? I still can't access the DLC... 🥲
maybe try reinstalling the game
that's probably why, also you will encounter bugs, Id recommend using that old version until tomorrow
fixes planned for tomorrow?
we love what you are doing and are very grateful to you for this project, we support you in every possible way, but you do not indicate in advance that you are going to switch to a new version of the engine, just roll it out... And what about us players?? Before buying a game, you always look to check whether your PC components are suitable for this project. So the optimization was in a deplorable state, and now the game starts and crashes, it is impossible to play.... Nevertheless, thanks for the experience. It's a shame that everything turned out this way.
Anyone got a fix for the random freezing?
Does safe mode launch in Directx 11 or 12?
On the hospital map, and on the mansion I am experiencing severe drops. On hospital, whenever someone peaks, or opens the door I freeze for a solid second, on the mansion if someone kicks a door it lags the crap out of my game as well. I assume it is just an optimization mistake, however putting it here wouldn't hurt either.
wonderful optimization
))
12
so your PC is weak... You need the i12-16890 and the frgtx 6090....
Same for me i freeze on most of the maps i just have to alt f4. It happens to me on the dorms map aswell and i can't complete it bc of the frezeing
Hello everyone, I have a problem with the game. 30 minutes after entering the game the game stops. It doesn’t give any errors, my computer meets the system requirements. please help me I really want to play this masterpiece.
yeah ur right, a 2 year old top of the line system is a bit outdated for games today
Try lowering your resolution in-game, not scaling
maybe in 3 generations ill meet reccommended specs
It is not that I necessarily freeze on every map, just on those two maps there are specific events that happen wich freeze my game. Kicking or opening doors just breaks it.
for me i freeze from time to time and it recocers but when im in gas it completely brakes
especially on dorms
Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz, RAM 16GB, GEFORCE RTX 2070
The game is on SSD and I have some space left on it.
Settings: DLSS and FSR are off, like you have said. Settings are on Epic, but I tried different settings before your fix and so 0 change to FPS.
so, how do you guys do your lighting in this? is it baked in or is every source rendered individually
the transition from ue4 to ue5 isnt a bad thing i dont mind playing on like 30-40 fps but the freezes and drops are kind of annoying
RoN is baked in
What was the point of upgrading it in the first place though
From my understanding performance is due to the in-game graphics menu not saving settings properly, you would have to go through the engine files and update your settings, and performance will improve.
Ah cool thanks
Your not wrong bc the game looked great in ue4
but apparently it makes it easier for the devs
true man i got the same issue
my specs arent the best but before this update it ran 60-70 with some drops to like 37fps
Well, i guess we'll see really. How the entire industry is right now, im honestly not going to hold my breath lol
my specs:
Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz / NVIDIA GeForce GTX 1050/ 16 GB ram
Theres just, litterally no reason for it to run this bad though
ikr
play in direct x 11 or 12?
i do 11 bc i get a little more fps then in 12
well in 12 i couldnt load in to the lobby
Im kinda suprised u were able to break 60 before with a 1050, what res were u running
Baked-in LM are never easier, it slows down iteration over level design quite a bit and bloats your patches due to updates in levels triggering light map rebuild.
Not using fully dynamic lighting is more of a backwards compatibility thing if anything, since RoN has painfully low minspec which limits the devs quite considerably.
It is in %LOCALAPPDATA%, aka C:\Users\%USERPROFILE%\Appdata\Local
I think a dev type here that the transition to UE5 makes it easier for them
oop ok
windows key + r for run box
AH, you were talking about UE5, in which case, no, upgrading an engine makes things for you quite difficult, and is rarely worth the effort if you are not going to use most of it.
Which is the case for RoN really.
found it, how do i know which one to add?
are you trying to do the fix on the steam pinned forums?
yhg
Then the transition to UE5 is really just pointless...
Yeah, so what was the point, instead of just focusing on making the game run better
Just makes the game unstable
this doesn't work right
idk, a person in general discussion said it worked
I recently discovered a mod that somehow fixed the crashes mid game, if anyone has this issue, download: https://www.nexusmods.com/readyornot/mods/4259?tab=files and see if it will fix it
yea
I enabled hardware acceleration for the FR and after a restart it says that I need an RTX GPU to enable it. Issue is that I am running the game on RTX 3070TI.
tysm. went from 60fps to 180 😭 👍
Frame generation does not work in RON?
All of my settings, loadouts, keybinds etc keep resetting every time I launch the game, regardless of what Dx version I use or safe mode for the same matter, does anyone know whats up?
If you do not have a nvidia 40xx, no, otherwise I have seen people say it helps
There seems to be an issue with the settings menu not applying, which is likely the cause of performance issues
@grave tapir my theory is that the menu ^ is not saving properly
Which would explain a lot of it tbh
It's interesting because it seems to affect everything, like I can play for 3 hours straight, come back few hours later and be set back to the same state I was when I first loaded the game after the update
Like it almost seems like a time jump because it really does affect everything down to the level scores, still get the achievements though
I know changing game screen setting works, but otherwise FSR doesn't change anything yeah.
Nice what hardware and settings are you using? I went from 100 fps avg max settings 100% res scale 1440p, to with the TSR upscale fix at 67% it went up to 170-180 fps avg depending on the map.
when i try to change the fsr2 quality to perfomance, the game crashes instantly, can i do something against the crashes?
i9 11900k, 3060ti and 32gb ram
From what i have seen by my own testing it's usually fine for the few rendering features i've checked
FSR is straight up broken and only ever enables Quality (or Ultra Quality) mode and doesn't scale to any other.
Res scale is 1000% broken feature atm.
DLSS is reportedly "broken" but dev said it's fine so perhaps driver/OS not updated, or maybe saving like you said.
Though users that have trouble saving anything usually tend to have read-only on %LOCALAPPDATA% either parent folders, sub folders or files (in general for any UE4/5 game).
Also remember that due to the random-arsed workarounds floating around, people intentionally lock certain INI files to read-only mode themselves, which has always the unfortunate side-effect of them forgetting about it an hour later.
im having an issue where the suspects seem to know where i am and start shooting the second i barely peek around a corner
That's not something this kinda tech support would be able to help with #1050535723087958156 #🐜archived-bug-reports-channel
But in general yes if they spot you they will shoot you
And if they spot you they track you momentarily through cover/concealment
Go to %LOCALAPPDATA%, aka C:\Users\%USERPROFILE%\Appdata\Local and check if "ReadyOrNot" directory is set to Read-only, if not, follow each sub-directory from there (so .\ReadyOrNot\Saved\Config, etc.) down to individual files.
None of them should have Read-Only flag, if they do, remove it.
Howdy!
Having trouble switching to the home invasion tab, its greyed out although i've purchased it. Any help would be great
Suspecs that got alerted/stressed enough will no longer hesitate and will no longer be on low-ready.
If you spot a guy that has his gun up, his reaction time will be nearly instant.
Record a replay or a video and create a bug report so devs can investigate if you did something to alert them beforehand or if it's a real bug.
It's only available in Practice and Multiplayer.
ahh
doing that rn
It is on only read, but when I try to change it, it just goes back to only read after I close the menu
Was the game running when you tried to do this ?
Nope
Is it like this ?
Well, a bit different (it has a blue box with a -, probably windows 11 stuff) but it does say the same
In Win10 it was black square for directories containing multiple files, or checkmark if it was actually read-only.
If you have unchecked it once, applied and closed it should be fine, though just in case, locate for example GameUserSettings.ini file and check if it has that flag or not.
If not, you could try playing for a bit, fiddle with your settings and reboot the game.
See if it sticks or not.
just got the new update and apparently i have some corrupt files even after a fresh install?
Every time I launch ron, even in safe mode after the credits screen my game goes black when launched, It was giving that corrupt data when I had mods installed I deleted all my mods, still broken.
Every time I put a mod in the game, it gives me the corrupt data error, since the new update I can't play the game at all, I had lots of mods to add guns, and attachments.
guys when i finish a mission with an grade and i go back to headquaters its still on uncompleted... anyone knows why?
You are not gathering all objectives including soft objectives
Just reinstalled my game to remove all my mods and voice line changes, when I open the game my cursor is running at about 30fps, all the text in the graphics tab is really big and when I go to enable frame gen it wont let me as I "need an rtx gpu", when im using a 3060. Help
That is because you are downloading broken mods, do not download mods until the author updates them
You need a nvidia 40xx card for frame gen
As for the rest that is a known issue, besides the text being really big, make a #1050535723087958156 #🐜archived-bug-reports-channel
Alright, if I dont touch any of my modded loudouts, while those mods dont exist they wont be affected right?
Aah, alr i guess ill just use lossless scaling instead
It depends, but most likely yes, but you may have bugs like your slots not changing until you select the default loadout
Alright, thank you.
same with me. Its a visual bug if you want achievements it still adds it to progress
It's not a bug, you are not gathering all the required objectives
It seems to be sticking at least for now, if it doesn't break again you've saved me from quite a lot of suffering, thank you
Anyone know how to fix the 24-30 fps all the time, I have the game at medium graphics, and the game eats all my ram and cpu.
so it will show up sometime?

As said before (not gonna repeat myself again though) you are missing objectives. You are not gathering all of them, including optional ones, it will not be marked as resolved until then
Before the most recent update, I used to get 120fps stable, not im only getting 50ish, what happened???
Can't finish a map without crashing. How?
Try lowering your resolution
How low?
There is a hotfix releaseing tomorrow for optimization
At 62 now
Anything lower than what you have atm, but people say 1440p seems to work fine, but I would play with it
There is also a video around on how to tweak the engine to get better performance
Alright thanks, ill wait until then
I meant scale
Could you send a link?
Will try that tho
Try the pin in #💬general-discussion but I don't have the link on hand
Notice the difference already
Thanks
@tropic moth sorry for the ping but I don't have permission to type on this thread: #1265881455364542496 message that you @pinged me
answering your question, no, I never selected the option to delete my data. A friend of mine lost all his loadouts and cosmetics. Happily, I only lost all my config preferences, like keybinks. My game save and cosmetics are intacts.
Hi I just bought Home Invasion DLC but the missions are not accesible, is something i need to do to play the new missions?
They are only in practice and multiplayer, not commander mode
Thanks!!!
I have SO much stuttering in co-op, no matter who hosts.
Me and my friend are 1GBps internet, when I ping his host via cmd we are like 19ms apart.
I've tried a few reddit workarounds to no avail (stuff like metered connection? idk why it would work but we tried it lol)
Everything's fully updated on both ends, both using Dx11
Any fixes
Ah, oki
So no?
oh thank God
After the home invasion update I know it is aware that there are a ton of performance problems but I’m not sure if this one is known yet. I have 2 graphics cards in my computer a 3060 ti and a 3050, my monitors are plugged into the 3060 ti and the card is in the top pcie slot, before the home invasion the game was using my 3060 ti, but now it’s using my 3050, resulting in worse performance. Is it being fixed on which graphics card the game uses?
Playing in windowed and windowed fulscreen my taskbar comes up when I look down, that fixes when I go into fullscreen, but in fullscreen I can't click any of the options or menu buttons I have no clue what's happening
Are there no fixes at all?
Im literally playing unmodded, and there is no fix? I'm genuinely gonna refund along with 3 others if this aint responded to, wtf is this
Tomorrow there will be a fix
Okay, fingers crossed ig
Anybody know about this?
Hi, i have a quick question, so i have been trying to launch the game for the last 3 days, trying to troubleshoot it but its always coming up with "corrupted data". i tried verifying files, reinstalled the game, deleted all files, then reinstalled and still nothing. quite confused about this
You need to manually delete all your mod files.
from inside the game?
No, manually through file explorer.
For like the 8th time, on the condos mission, everytime I enter the last bedroom / video game room it crashes.
Every time with 1 evidence left to collect.
This can't be real life... 😐
Any news about the performance bugs? Have Devs done anything yet ?
It's not about safe mode
The game just crashes a lot after the update
Copy that
Anyone have an issue where the game flickers? It's playable, frames are high, no stuttering. But theres a constant flicker, even at the menu screen
My game keeps crashing even after reinstalling and clearing mods and save data, even in safe mode it crashes
It's the update. Everything is messed up
Does anybody know the fix to this or if it’s aware from the devs?
That's what I thought, I thought it's an issue with the new DLC (I don't have it but I plan on buying it)
Right so muting everyone on VOIP in the game has partially solved the issues
Seriously it's made a massive difference
https://steamcommunity.com/app/1144200/discussions/0/4515505814156131770/
Doing clean install atm then trying this; supposedly it helps
I wish devs at least talk to us about it . I'm not saying they should magically fix everything the same day but they could at least say something
They need a good community manager
new dlc sucks
too
The whole update sucks
They been here several times before, but you can't expect them to keep up with rolling chat of people not bothering to read even a single message above theirs.
true

I liked if after I got my performance back
The AI is much better. It was way too easy before
I can actually max the game out now, and get a stable 60fps on my 2080super, which I couldnt do before
(Initially after the update I was getting sub-20, so I had to do a lot of troubleshooting)
how do I get rid of the bug where all my NVGs , gas mask, etc, are equipped even though I only select 1? Its driving me crazy
Reset loadout to default
Having an issue with my game, it says something about downloading a new driver or changing APi, something i don't understand,
Like it refuses to launch whatsoever
Game physically will not let me launch it, it says that it is downloading (it isn't moving at all), isn't opening at all, and won't let me cancel the download either to restart it.
Update your graphics driver
I tried that and it doesn't do nout.
I downloaded it and nothing mate.
omg thanks!!
Elaborate.
Tried both, and the clean version.
When you launch on steam, its supposed to ask if you want to launch using "DX11" "DX12" or "Safe Mode"
Hmm what's the error message say
It won't let us launch it at all.
Now it tells me it's already running when i closed it all..
There isn't one, that's the issue.
It refuses to open, then it refuses to let me restart the update.
Is it in the processes when you open the task manager? Silly question, I know.
I simply open it via either the desktop one, or going through steam. The update has been sitting at 1% for ages, then refuses to cancel.
It doesn't pause, it doesn't cancel, refuses to let me uninstall to reinstall, the whole lot.
It doesn't want to open, but also doesn't want me to close the damn thing.
Update graphics driver 🙂
I have downloaded the driver it is suggesting.
He's done it twice.
I have done it a couple of times.
Maybe more.
When installing, use advanced options, and select "clean installation"
It has randomly started installing.
DDU, nuke the driver and install the latest
Then this..
Idk how to resolve this.
Remove your mods.
I can't i need access to the game to get to mod io
Because your disk is slow.
and yet doesn't work.
No, remove them manually from game files.
My PC downloads the whole of RDR2 in 30 minutes...
I don't know how to do that, i'll be honest.
I'll see what it says when it downloads.
You would download RON in the same amount time if you would try to uninstall it now and redownload.
Patching is the important bit you don't understand. And that is entirely disk I/O bound.
Your disk is slow.
I have no idea what any of that means but sure 🙏
You can read about how SteamPipe patching works on Steamworks documentation.
I do see some issues with how it says it's gunna take LONGER THAN A YEAR.
What's the disk model number for the one the game is i stalling on ?
I have no idea.
Look it up in Device Manager
It is installing, it's just telling me the wrong numbers. I'm at 81% now.
I'll get back to you when it installs (if it does).
I'm redownloading Ready Or Not for the second time and it says it's going to take a hour
It's at 2% because I just deleted it and started downloading
Also, how much free space you have on the disk the game is installed on ?
Do you have multiple Steam Libraries (multiple disks with steam games) ?
About a TB.
HDD or SSD ?
All I did was change my loudout
You have a modded gun in that loadout which breaks your game
the RPK/m249 do that
Oh alr, I spawned in and I had the RPK out, when I crouched I was back in the lspd facility, where I could walk to change my loudout
Yeah I would override that loadout with a vanilla gun
I'll keep it how it is, if I dont leave the armoury it shouldnt be much of a problem.
Hey, mouse has been consistently stuttering when playing. To the point where I thought I had low FPS, but just the cursor is stuttering.
Any tips to fix? Brand new mouse, and I dont think my pad is the issue
It doesnt work, use nexus
It got broken?
Yea
Oh damn, thanks for the info.
Alright, so I have an attachment issue with the Flux Raider. It has the IR laser permanently affixed to it, and it will let me equip another attachment, but only the IR laser works and it shows two attachments on the weapon. I have restarted the game, my computers, verified files, uninstalled and reinstalled and I'm absolutely stumped on how I can fix it.
(on dx12 btw)
Does anyone know how to fix the resolution scale down or stop it from resetting everytime you exit settings
my buddy cant get the new update he has support pack too any ideas how to fix?
What version does it say in the top right corner?
Im having the same issue. It says version 73 from Feb 2024
I have the supporter version and it says that the new DLC is installed but when I boot up it still shows the Feb 2024 version. Reinstalled 4x now
I'm having issues with mod.io mods for ron, I have ron by steam & I downloaded a mod to change up the G19 handgun waited for it to download & then restarted the game when into the game to try it out & the G19 is the same, the mod is not working, any help is appreciated.
It is likely out of date.
Aiming with all pistols is very blurry for some reason.
does anyone know how to fix this?
I can't take the IR laser off the Raider SMG, anyone else having this issue?
YES BRO LOL
Do you know of a fix?
I have tried literally everything and couldn't get it to work 😭
Verify your files for the game through steam
Ok thanks I'll have to try new mods then
Game is running on safe mode so I dunno what's causing this
Messed up depth of field setup for the weapon perhaps. You can turn the setting off I’m pretty sure
Can someone help me with fixing my files, i think i messed up putting the voice mods in the wrong folder and now my game wont start
Any idea how/where?
dumb question, but if I uninstall and re-install the game I still keep my saved data and progress? Seems like some previous mods are still enabled, like AI teammates having gas masks and NVGs.
Guys, I have a question. With the new update, you can now unlock achievements in Co-op mode. However, I have S tier every mission so far but since it was In co-op I never got any achievement back then. Do I have to redo it all over, or is there a way to unlock the achievements?
i think it's depth of field for everything though, even my weapon selection screen is blurry
That's happening to me too, every mod I download even the ones that were updated today for the new update, they never work.
I know, downloaded a mod that said it was just update but its not working.
Which one?
are we ever going to be able to get our mods back
If they are updated by the author, yes
I don't have any mods and can't even launch the game, are people playing vanilla also having issues? Also, did the shift to UE5 substantially change the system requirements?
Hihi, quick question here again, so i'm trying to install the mods (they dont work but thats a diff issue) but its constantly filling up my C drive instead of my E drive despite me having the game installed on my E drive, is there any way to make sure the mods install to the E drive?
Yeah the mod.io is broken with the new update, I just downloaded the mods I wanted trough nexus praying it works with the new update.
anyone else not able to connect to or host a lobby?
I don't think I have any mods installed but I could be wrong, how do I check?
I seem to be
Describe the crash and when it is occurring and what message it gives. The current patch is broken, so performance is less that it should be.
Just don’t use mod.io, it’s bad normally and seems to be having issues currently. #❓modding-faq-archive has steps for manual installations
Describe the issue and what message it gives
I described the issue. No message given.
What do you mean you can’t host? It’s just loading into a friends only lobby. To join, do it through steam since the in game buttons are broken in this patch
so multiplayer is down rn?
If you’re not connected online to steam, it will be for you
I am connected through steam
oh I guess there is a message it just says "failed to join host"
That’s just a generic connection error, no specific cause
Nexus is not working for me so far
Mods are broken and need to be updated, it is that shrimple, if the mod is not updated for Tuesday or later, do not install it.
hey so my friend is having a problem with the new update it keeps resetting just his lean keybinds is there something we could do to fix that or?
UEPrereqSetup_x64.exe Error 0x80070643
I recently purchased the Home Invasion DLC for Ready or Not, but haven't been able to play it. Every time I launch the game I get this "UEPrereqSetup_x64.exe" thing that starts up I accept everything and it gets about halfway through before I get a pop up that says;
"The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package 'vc_runtimeMinimum_x86.msi' in the box below.
Use source: C:\ProgramData\Package Cache{EC9807DE-B577-47B1-A024-0251805ACF24}v14.29.30133\packages\vcRuntimeMinimum_x86\ "
If I just ignore it and close it the installation stops same wioth cancelling it. Clicking "OK" prompts a new window that says;
"the current path cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'vc_runtimeMinimum_x86.msi' in a folder from which you can install the product Microsoft visual C++ 2019 X86 Minimum Runtime - 14.29.30133."
I have spent hours troubleshooting at this point, deleting different file keys on my pc, and installing and deleting Microsoft Visual C++ Redistributable programs on to my computer, (I have 2005, 2008, 2010, 2012, 2013, 2015, and 2015-2022 installed) and have run the Microsoft troubleshooter program. I've used the /sfc scannow commands as well and haven't found anything. I've uninstalled and reinstalled Ready or Not and verified the integrity of the game files but everything comes back clean. I really don't have much else I can do now, so I figured I'd see if anyone else has had the same problem and or reached a solution.
Here is the Log for the UEPrereqSetup_x64.exe program during it's process.
this update cost me my supporters pack and rights
no way to prove i own what i own aside from super old screen shots , aswell as game review before reviews were public access
Most authors didn't update their mods yet sadly, check if they were updated today then download.
it was something like 7 updates after december 16th or what day it went public that passed threw my system fine , then i stopped updating , i was the guy who got bees working to figure out why , and i was told to remove my supporters edition , i did so , and now this DLC is supposed to be free to my account , but its asking me to purchase it because steam does not have the supporters pack for purchase , its not registering me as having it , therefore i don't get my supposed free gear and perks
my email has changed its been so long or at least i cannot find the purchase history in any of my records , i have looked and done due diligence before making this short story
my steam review doesnt even show the game picture and its my only review that does that too ,, its hazed over like its censord
Do you have the supporter edition on this page? If not, are you certain you are on the same steam account that purchased it? And if so, did you contact steam support about this? They will have a record of all your purchases on the account.
You would have had to contact steam support for the supporter editon to be removed from your account in the first place, if I am understanding your post.
What do you mean by saying "remove supporter edition" ?
I can't imagine anybody here would suggest removing an entire DLC key from your account.
Were you told to opt out of Supporter Alpha steam beta branch ?
If so then that's an entirely different process and have nothing at all to do with the DLC.
updated my game and now everytime i try to play DX11/12 i get a serialization error, i completely wiped my game (using the launch option to clean mods and data) and still can run DX11/12 i can run safe mode but i want to play with mods any help
Mods broke and need to be updated by their respective authors.
also shoudlve mention there not mod io there nexus mods
after there fixed i can run DX11/12 without getting serialization error ?
Monitor your favourite mods and download them once they get updated.
Shrimple 💀
lmao
thank you
idk if this is the right chat for this but how do i link a vc channel to a chat msg in LFG?
Right click the channel and select invite, I believe.
😂😭
Your right, downloaded a mod that was updated today and works, and like you said sadly most have not been updated yet, hard to find one’s that work right now.
hey does anyone know how to fix "serialization error"?
Told me to verify the integrity of files, which i did and nothing wrong with that, but the popup still appears everytime i try to start it
Your mods are broken, remove them #❓modding-faq-archive
is anyone else having issues with their mods not working or is it just me
Lmao
Hi, trying to get back into the game and crashing whenever I try to open anything from the main menu.
No error codes, just straight to crash reporter
Specifically, it happens when I try to open multiplayer or singleplayer
If it happens in Safe Mode create a thread in #1265712033295372473 and provide crashlogs from %LOCALAPPDATA%\ReadyOrNot\Saved\Crashes
If I boot in safe mode I can't even launch the game to the main menu, it just instantly crashes
Crashlogs from both instances then, ping me there once you'll upload them.
where do i find the crashlog itself sorry? Just seeing random stuff on here with no actual information
welp that fixed one thing, now it won't even load the main menu
Sort directories by date and upload the latest one
The entire folder?
If you are in correct directory and you see UE crash directories with bunch of random number and letters, yes.
UEminidump?
If you deleted game files, verify them in Steam, it'll redownload what's missing.
Probably, not on PC so i can't check rn.
Yes everything's spotless from the integrity check
Finally got it running by doing safe mode
So you still have mods ?
I know 13th gen and 14th gen have an instability issue, is that a possible cause?
I was able to play the game before the 1.0 update
Nah, i've already deleted all of them
I need those crashlogs to answer that.
These CPUs are running high voltages, causing rapid degradation resulting in stability issues, Intel is hopefully going to undo their own fuckup in August.
If you can only run the game in Safe mode and bot any other, you have mods.
So try the DX12 option.
Yup, it's that much of a fuckup.
the DX 12 doesnt work, where else are my mod files?
fuck man, how do you fix that?
i checked the radgametools page but couldn't figure out what it wanted me to do
Better to submit the crash files before you start chasing a 🪿
yeah well i need to fix it anyway lol
Which exact CPU you have ?
#❓modding-faq-archive at the bottom for pak mods
@rustic laurel if you want to create yourself a template for that "DirectX 12 not supported", in Ready Or Not it's all about Agility SDK support which means minimum Windows 10 build just got higher and so did GPU driver version.
For Win 10 it means the following:
https://devblogs.microsoft.com/directx/gettingstarted-dx12agility/#setup
For GPU driver it's safer to update to latest.
Though these problems happen to people that are stuck and cannot do auto updates, so manual downloads it is.
I'm usually pretty quick at addressing those but just in case 👌
Wow, that’s bad.
What's even worse is that AMD didn't capitalize on this, they pushed Ryzen 9000 further out..
What an opportunity, LMAO
hi, i have a problem, the mission ends as soon as all objectives are done and doesnt let me collect evidence, and now i cant get S rank on a lethal obsession... wtf should i do??
(nvm it just showed it as A+ at the end screen but now shows S on mission select)
Again, which CPU ?
The issue is affecting disproportionately more the higher end CPUs because they do run on higher voltages on average, especially the i9s to even maintain that barely-stable 6GHz boost.
Which is why i said already that you should post the crash log first before you go on a wild goose chase and potentially waste time.
13700kf
🔥
i still don't know what to send for the crash log though
idk which of these is needed
For me the xml
Game has become unplayble for me
As of the new update, I cann't change either the resolution scaling or the use of AMD-FX resolution scaling
Both of these are broken and need to be fixed by the devs.
Screen resolution is resistant, to change, it only works properly when it full screen mode by being in full screen mode, in either windowed mode when I alt-enter to full screen it changes the resolution back again
WIndowed Borderless is always running at native.
But if you can't change Windowed screen res it's a bug/oversight so report it as such.
Is the hotfix out already?
no
disable all upscaling in the game and edit GameUserSettings.ini by adding sg.ResolutionQuality=67 (this is resolution scaling percentage, 50 being lowest) under [ScalabilityGroups]
I confirmed this works and it utilizes UE5 TSR
oh and the .ini file is located at AppData\Local\ReadyOrNot\Saved\Config\Windows
TSR is a form of anti aliasing, right? In #💬general-discussion there is a pinned message from Kaminsky that says if you have some performance issues you could manually add AA into the config and there is an option of "TSR AA", should we use that too?
UE5 uses TSR by default, TAAU option (r.AntiAliasingMethod=2 mentioned in his post) is considered legacy now and yes TSR is another version of TAA (newer than UE4 TAAU) and you don't need to add anything manually into the config.
I need some dir location to clear dx cache because my game are jammed when playing missions, all missions are jammed.
Alright thank you very much.
Hey could anyone help me solve this issue?
Pinned message in this channel
When i open game it pops up
My game freezes frequently, mostly in half-outdoor maps like valley of dolls
clearing dxcache check it work or not.
how
I'm still checking to see it work or not.
these dxcache made 4gb+ usage.
Is shader cache just dxcache
shades is dx12 mode not 11.
it didn't work it still jammed.
maybe the ai mod didn't match ue5 yet.
The game works for me
trying disable ai mod.
is fullscreen mode better than windowed fullscreen?
I heard that in fullscreen, gpu had full control over the game while in windowed fullscreen, gpu need to use extra computing power
I dont have any mod
no mod but still jammed in middle of game?
yes
how many the RAM you have?
18gb
???
this shouldn't happened.
is there anything like memory leak
i am gonna be so mad if the game is completely playable before the update and now I cant even avoid freezing, and I also cant refund as I played a lot on the previous version
try beta channel pick supporter to back in ue4 version.
but then there will be no multiplayer as no one else is playing ue4 version
yeah, fully bullshit
bruh what is all these craps
even company of heroes 3 are not bad like this, atleast is playable.
DX11 is caching shaders on a driver-level the same way as DX12 without PSO pre-caching does, and driver cached shaders for DX11 and DX12 are in almost the same directories in either Programdata or appdata.
Just that DX11 shaders are less complex so people do not even know about it.
lmao my dx11 tend to freeze, I use dx12, I cant even enter headquarters
ay I have the DLC but the home invasion button for me is grayed out, how do I play it?
Anyone know what time the performance fix is being released today?
fps dropped from 80-110 to 50 after the update
my problem are over by disable old ai mod.
commander mode can't play them yet.
go training mode or mp mode.
So what’s better? Dx 11vs dx 12
Dx11 more stable
guys did someone know how to have better fps like 60
WTF is wrong with this update ? always freeze, any tip ?
verify game,delete data and go to pinned messages in general discussion
and follow what they said
If it dosent work wait till Friday for a patch targeting performance
I could play Ready or Not before on High with my older GTX 1050i card. Not the game seems unplayable, because it freeze after x-amount of minutes. Even on all Low settings in Graphics settings. Plus 50% resolution scale-thingie. So I hope devs will release a fix, so I don't have to buy all new rig. With new CPU, new MB, new DDR5 ram, new Gfx card etc. Even if just a modern Gfx card will fix it, it will set me back many $ (or in my case, danish kroner living in Denmark).
BTW: A dev recommened another user in here to use the site https://www.systemrequirementslab.com/cyri/requirements/ready-or-not/16028
to check if his rig are able to run the game. But the site should be updated after the new update, so the real requirements will be shown.
Why does every update break the fuckin game 
Not the the seem seem unplayable=Now the game seems unplayable
I have an 11700k and a 4080s, in what world should i be struggling to push 60fps in the main lobby
(sorry my old fat thumbs)
Monochrome: Oh man... if even your 4080 are strugglig, there's no point at the moment for me to upgrade my rig.
Yeah the game is cooked af i wouldn't worry about it lmao
Swear to god UE5 is nothing but an absolute disaster, or disaster to work with, because half the stuff thats come out on it has been dogwater
Hell even including UE4
The point to suspects/civs also had a bug now. It seemed flawless before. But now they are often moving away from you, when you command them to move to your voice.
Same here man could play at a stable and consistent framerate before update now every time i get gunfights or explosions my game freezes, hoping the patch that's coming fixes it if not I'll try and get a refund
Oh now i know why my laptop starts lagging after the update
They just said Friday at the earliest,could be pushed back for all we know
Am I here in the right channel for asking how I can "use" the DLC? It says in the steam game properties that I have it alltogether with the supporters Edition but I would still be able to buy it and when I run the game it's "just" the base game without any new DLC content?
someone solved the problem with crashes by programmatically disabling DCC, but there is a person and an AMD graphics card, slightly different instructions, it all looks strange...
@lament briar can you possibly help me with my issue?
like you, I'm trying to solve the problem with departures and so far nothing has worked out, I'm not sure that I can help in any way...
I see =/ So I simply have to wait or purchase it for 9,99 even tho it's in my library? ^^
There are already solved problems in the pinned messages, did you do what people wrote in the instructions and in general what kind of problem do you have?
Oh, stop, I'm sorry, I must have confused you, I didn't mean the answer to your question, it's just too confusing...It's time to create a new branch...
Well I just came back to RON after like two or three months of "abstinence" and saw there's a DLC, checked on steam if I had it since I'm supporter and it's in my library, when I start up the game tho, doesn't matter if practice mode or friends only lobby I don't see any new content. No maps, no guns, no cosmetics.
What version of the game do you have, can you watch it??
I updated it through steam
Opt out of Supporter Alpha branch if you are in it.
you mean in the DLC Tab in steam?
I mean what i said, supporteralpha Steam beta branch
I'll try to do this if I understood you correctly
Trying to play with two friends one can join but the other keeps getting "connection to the host has been lost" we are waiting in HQ and my friend and I (that are in lobby) can join each other but no one can join the other friend if we try we get the same message before getting into the HQ.
Any advice or know a way to fix this issue?
I have no clue what that means
do you mean there?
ahh I see I think. the other one?
What is your game version in Main menu, top right corner of the game.
this one?
Yep, opt out, it's not used and you do not have the Home Invasion update.
You do not even have the previous update LOL
wow now there's a 46gb update ^^
dayum I feel like a 67 yo person aghahaahha
@odd trail Like really, can you remove that supporteralpha branch finally ?
This is like the hundredth person which got stuck there, and it is so unnecessary 😭
It should default users to "default" branch if you remove it iirc.
It would, since it wouldn't be a selectable branch anymore. I can certainly ask but I don't know if we can disable it or if we have to nuke the branch entirely to make it unselectsble.
You can always create more branches in Steamworks backend, so it'd be better if you nuke it entirely for now, since it doesn't really appear Void is going to leverage it anyway (it should have been used as pre-release UE5 playtest but it's too late for that).
There are people completely unaware of updates because they do not read news, so who knows how many more folks are stuck like that with old content.
And if you want to go an extra mile, create new brannch for backwards compatibility so you avoid the backlash of not having the UE4 build 🧠
I have the same problem.
There's some advice online to check your firewall settings or update your drivers or restart your game. Overall can't get it to work for me and my friend.
did you guys turn on TSR
I have this error when i start the game, please help me.
Remove all your broken mods, they are not compatible with current game version.
What's TSR ?
something similar to dlss and fsr
TSR is now the default form of AA, so if no other upscaler is used, that is what's running, if that's your question.
You're my hero! Thank you so much ❤️
Is fsr failing because tsr is running
TSR is platform-agnostic Temporal Upscaler
However as in the currently build you can't change the Resolution scale, it is running more-as AA (fix coming today)
is tsr causing fsr3 to break
Technically you can change res scale through the game UI, but your option is basically only 200% or GTFO 
it worked, thanks a lot!
any tech guys can jump over to modding chat. to have an opinion on my last message? haha

You can always generate link to any message, channel or thread on discord and share it.
if you have mods, and you get the "data corrupted", the mods are broken and outdated.
i have the same problem, I deleted all my mods and data still not working, should I reinstall ron?
eh just as i was coming here about the data corruption
never mind still had some mods in paks lol
yeah but for some reason when i subscribe to a mod its not putting the file in the map again
cuz i deleted those maps. but i added them back with the same name. nothing was in those maps except for the mods. map mod.io and map 3971
Does anyone else have an issue where the DLC is suddenly unavailable?
It's grayed out.
It's only accessible in Practice and Multiplayer, it is NOT accessible in Commander mode.
Yeah, I know. I started an online lobby and it's grayed out.
And you have the DLC unlock ? Either via Supporter pack or via Home Invasion ?
Nevermind, I restarted steam and now it works.
I’ve got the same issue, how do I get rid of the mods
Thank you, sorry
hi i got a 100% ironman save file i didnt play for sometimes until now i tryed to open it again for continuing my playthou with it for the new dlc and it seems like its saved for 100% still and i cant play the new DLC maps. PS got no mods noting all clean most my time with online only or testing out stuff in practic is that for me only bug or somthing ppl have as well. Thanks !
Home Invasion maps is not in Commander mode but is in Practice and Multiplayer, if that's what you are havving issues with.
not that i can play the DLC in online or practi mode no problems there, i got my save for ironman mode i completed, it say 100% when i get in there it donst let me play the DLC there is it becs its an old save befor the update ?
On another note:
I just spoke to another UE5 game dev and apparently there's a bug in few recent FSR3 plugin versions (3.0.4 and 3.1) causing game crashes, which would also correspond to what i've seen in few other UE5 games recently (though, not all ?), nice, very nice 
Apparently they fixed/worked around it.
@odd trail You aware of this ^ ? 🧐
You can't play DLC in commander mode
Iron man = commander mode
Yup! That was brought up pretty quickly
so I CANT play it there on my ironman save is that part of the game ?
i thought its a bug that i cant finsh all the mission on 1 save !
Yes, only practice or multiplayer mode, dlc is closed in commander mode
do the achievement work on online or only on practice ?
Only in singleplayer, you cant get achievements in multiplayer, unless they fixed it, but there is nothing about it in patch notes
Speak of the supporteralpha devil, there's a new thread in support forum.. 😄
They did fix this achviements do work in mp
there is an issue when i shoot a suspect my game freezes
so whats breaking fsr3 and dlss
yeah also i used fsr on peformance since native is shit its always on 30 fps
devs please revert to unreal engine 4 😭 i can't take this shit no more
FSR doesn't really work right now beyond the Quality/Ultra Quality preset. This should be fixed in upcoming hotfix later today.
i hope they do fix it because im worried that i can't play again
The minspec shouldn't really change so they will have to find fixes for all these wrid performance issues at some point anyway.
true also the resolution scale setting doesn't work at all i think they will fix it today my personal problem is that the update coming out midnight for me so i can't test if the game really works or not since i have other stuff to do tomorrow
great news
I tried and tested the latest fsr 3.1 for UE 5.3 and it worked good on a Tech Demo project. They were supposed to fix any issues with the latest 3.1
🙂 i am glad i can help, friend and i did rust belt together with magnums he got the achiev i did not.
The dev I spoke to confirmed they repro'd the crash with FSR3.1 plugin version i UE5 in their internal build.
I did not get any specific repro steps or symptops so dunno how or when this gets triggered.
Though Kaminsky here confirmed they are aware of it and they did catch the bug already so w/e the plugin version it shouldn't be an issue for RoN 🫡
Thats good. Here is a quick Tech demo I threw together. The fsr 3.1 is stable AF it doesn't crash if you want to try it. https://www.artstation.com/artwork/dKvLqJ
Why do some of the parameter values I set up for the key and quality parameters always revert back to their default values, and then why does the game quality not take effect when I wish to set it up through the NVIDIA driver?
That highly depends, some things are broken, others might potentially be caused by your save files being read-only.
Post which ones do not save for you so i can tell you.
tech demo isn't the same as ready or not my friend
I wasn't speaking on or about your issue. Your issues should get a lot better once they fix the FSR upscale modes because like stated currently only FSR quality mode barely works. Once you set anything below Quality mode FSR it does zero difference in performance. Just give them time It will get better.
nah man i just said that you should test in game not test a tech demo with different code and say it works on there
Hello guys . Any news yet ? Or patches to fix the performance problem?
later on tonight for the patch
Really? They gonna fix it tonight?
I'm so happy
Just waiting for it to drop
Thank God
Btw how do u guys know about it ? O can't see anything in announcement or dev updates about the patch dropping tonight
i just finished the 4 first missions in singleplayer, they all have a grade of B or higher. But still no new missions are showing up for me. Is this a bug or am i missing something?
Maybe try finishing some of them with A or A+ and than see . Idk tbh
we dont have fragen with FSR because of the random crashs it caused
hey guys, im having serious performance issues when interacting with doors, also the game crashes like 50% of the time when im aiming down sights and shooting, started happening today, literally unplayable, pls give advice
That might be it, thanks !
my game crashes when i try to host a friends only lobby, can anyone help me ?
same
Firstly remove any and all mods on either side and check it that way.
If it won't work or you don't use mods, create a thread in #1265712033295372473 and submit your recent crashlogs found in %LOCALAPPDATA%\readyOrNot\Saved\Crashes
Kaminsky chatted in gen discussion that the patch would drop friday at the earliest
Good evening, how do I solve this problem?
Refer to the pinned message in this channel
Yes
I did a file check on steam and still no
ok
It's likely an issue either with your OS or the packages themselves.
I am not familiar with that specific error code but a bit of googling got me here:
https://support.microsoft.com/en-us/topic/fix-problems-that-block-programs-from-being-installed-or-removed-cca7d1b6-65a9-3d98-426b-e9f927e1eb4d
MS has a troubleshoot uninstaller for these kind of packages apparently.
where ?
dude 100+
how is your game even running
If I install double digit amount of mods my game just goes "nope 10 fps for you bud"
I'm running a 4060ti 
What should I delete in Paks? I don't understand?
The mods. usually labeled pakchunk99
My game keeps freezing 😐
The mods should look something like this. Pakchunk99 label. Also make sure you have the proper folder path.
okok
can i have someone help me with my ammo i cant have any ammo if u want to see what im telling u come US #8 and u will see my screen
anyone
Reset your loadout to default, if slots are taken up by invisible items
it shows 9/11 slots
Change it to default, it will fix
Is the DLSS or DLSS frame gen bugged?
everytime I run my game, it says corrupt file found. I already verified the files using steam even reinstalled it
Remove your mods, #❓modding-faq-archive
Verifying and reinstalling does not remove mods
Hello, pretty sure im not the only one with random crashes? I killed an enemy, game freeze for 5 seconds then crash to desktop. I'm running on DX11 and I've had these crashes since Early Access release tbh, disappointed they're still here. Verified cache, all that stuff :/ Any solutions?
This was in singleplayer, but i remember it used to crash on any mode 😄
same thing happens to me, game is literally unplayable rn
😦
i love this game, but I been waiting for it to be properly playable for so long.
The freezes are drastically improved since the last patch now at least, still a bit there but much better
23 megabytes and valley of dolls crash every time for me
Create a thread in #1265712033295372473 and submit your crash logs.
how do you use map modes with a friend? (we both installed it)
No map mods have been updated, so none will work with the DLC patch
Yeah sadly, I'm just going to wait couple of days or weeks hoping the creator updates their mods.
Game freezes when loading reaches 100% never had this problem before the update no clue what the problem is
Be patient. If you are using DX12, due to the new PSO caching system your first load time may be much longer than usual. It should decrease afterwards
how do i fix the mirror gun to showcase on my entire screen?
Has the resolution scale been fixed yet? Is there a way to fix it not using the game menu?
got everything to A or higher, still no new missions
really soon mate
Alright, thank you.
keep your eyes at next update, it will be really soon, also you will be able to use TSR properly by tweaking the scale
direct x11 or 12? i just cleaned my mods and stuff
will the game stop crashing after the update?
are you with any old mod running behind?
nope, wiped everything and doors cause huge frame drops and in single player the game just crashes on missions
#1265771933807546440 this exact issue
We have some fix coming and some of the internal testing didnt have this issue, I'm curious if it is hardware related as well, i would like to know your current setup/driver,
and related to the crash
win+r
%LocalAppData%\ReadyOrNot\Saved\Crashesand zip the most updated crash folder and send to me
i dm'ed you
Does anyone else have their monitor go black when quitting RON to desktop? It also happens to me when I alt tab to desktop to turn on UEVR to run RON in VR. This is with Direct X 12 version. I also notice the performance is lower in VR and 2D.
RoN in VR? could you say more about it please (i have a vr in here 😛 )
Game still freeze after X amount of minutes. Has even lowered settings down to LOW. 50% Resolution. And all effects turned off. I know I have kind of old computer with i5, and GTX 1050i, and 32 GB DDR4 RAM. But where able to play the game before on HIGH resolution without any lags or freeze.
50% res not working properly yet, wait 10min for the next update friend, 😄
ok. Would it be the same, to set resolution down to 720p instead of 1080p?
If you don’t mind me asking, What exactly is the update coming out soon targeting to fix? To my understanding it’s for some performance issue and mainly the scaling/DLSS/FSR not working properly, right?
50% res scale works if you force it in the .ini with the sticky on steam
I have done the ini fix and it has helped a lot I’m just wondering what the patch is for and if I need to change that ini fix afterwards
but the problem can be your CPU. UE5 can be tricky with the cpu. Ue5 is more demanding on the Cpu as well compared to UE4. You can have a negative affect if you bump the settings down too much too, especially if you have a lower end cpu.
The best result on UE5 is to use a more aggressive Upscale and maybe try to bump up from low to medium, especially if you have a lower end cpu. I know it may sound dumb, but it works.
Like for example in your case bumping it down to 33% resolution scale would be Performance mode then raise your settings back up to medium.
So dlss is not working right now?
i saw the video, it is the door bug eaten fps
Does other people with my old GTX 1050i (or simelar older card), but instead of i5 has a i7, also have freezes?
how old we talking? Is it a 10 year old i5 / i7 3rd gen?
6th gen i5 and 1060 has freezes rn
DK (ALAN) ok... hm... er der noget jeg kan gøre ved en door bug?
I have btw a i5 6402P
CPU
DK (Alan) sorry. Thought you were from Denmark with that DK in front.
But anything I do with Door bugs?
50% is equivalent to all upscale tech it doesn't matter if its Dlss or not. 50% = performance mode.
i have them, i tried everythign for like 5 hours and couldnt get it to stop
ok. Thanks. Hopefully with me upgrading my rig. Plus maybe new update again can solve it. So we meet halfways
hoping the update does something
dude, dlls and 50% its no quivalent, test this in games that have this settings, dlls looks better than just upscale setting
We aren't talking about image quality at this point, we are talking performance
Have ordered today a new CPU cooler, plus new fan for back and front. And a HUB to connect them. I only have 1 CHASIS connection on my Motherboard. Hope that works just a bit when in LOW settings. Plus maybe also new M.2 in next month, to lower the new longer loading times.
Is this with the latest patch or the latest patch + engine file tweaking
^1440p Max settings Everything on Epic with TSR forced @ 50%. Looks pretty darn good for me
I had to compress the image size way down too
TSR is awesome 😄
I love it lol, next best to dlss IMO
DLSS is usually better but in some few games it has been close
hahaha, Im brazilian/germany mate :P,
We are still investigating the door issue at Valley/Lawmaker, I myself wasnt able to get the issue happening locally.
why my RoN always reinstalling when new update is coming?
Because that is sadly how unreal engine works when updating games
in ue5 TSR works all the time?
by default if all other upscale is disabled then yes it turns on.
how to change quality of tsr? render resol in config file?
yes before the recent patch that is how you did it. Now with the latest patch they said they fixed, im still downloading
good job on the hotfix performance patch
fsr quality working great and tsr working good with the res scale slider
I noticed even TSR at 67% giving me 10-15 + more fps now
since the update
hope they fix dlss. i just love use dldsr + dlss
They will, but it needs more time to cook as said in the patchnotes
It works, but is stuck on quality
fsr q gives me 200 in the same spot at the shooting range lol
fsr q working excellent, but tsr @ 67% has better IQ
😐
just use one of those Dice for now
would love if the game would cancel the update
I told everyone on my pinned performance thread if they are still having problems with settings to uncheck the ready only on the .ini file just in case.
have fun everyone, now I can go rest. I have been helping people the past 3 days with performance issues lol
Thanks for the help, I'll keep the thread up for a while just incase some people still need the tricks or want to try
no problem, good idea to leave it up I agree.
Okay I need help.
I have some troubles with the game which is constantly freezes
In short - when I launch game with dx12 as recommended I can't even launch a lobby, neither a single player. It loading to a 100% and freezing with no response whatsoever.
On the other hand - launching with dx11 helps a little bit, I can create lobby etc., but when playing the game after a minute or two it freezes...
Any thoughts? Cus I really want to play the game
What are your specs and have you downloaded the latest update
Yes, I have it downloaded
cpu Ryzen 5 pro 3600
gpu rtx 3050
and 16gb of ram
Try launching DX12 but give it 5-10mins to load, DX12 uses PSO caching, so your load times are increased and heavy but you will stutter less in gameplay, especially the more you cache/load the map
Like just wait in the main menu or what?
Do I need to revert the ini changes I made for the resolution scaling or will the update overwrite that?
i mean updating drivers can also help lol
sudden lag/lower fps since update?
yeah man but todays update should fix the issue
i had the same issues im still getting the freeze bug when i shoot a suspect
like coming update? cause i just updated it and got lag even tho it ran very smooth for me before the update
Still have the freeze crash bug
same
no the update is "Coming" was already released check #announcements
are you using FSR or dlss?
Tried with and without, no difference
i think it got to do with decals and ragdolls
Yeah i think so aswell
ragdolls and decals make infinite number of instence that lag out the game
this game is making me go crazy , the update was 3.8 gb i closed my steam once and after that its 22gb
because i get the freeze bug when i kill a suspect
i usually get it when killing a suspect but sometimes its just completely random when opening a door
No, it will cache in loading screens as you load into maps
yeah occlusion culling is bugged as well
so sad that the update didnt change anything
Update didn't help at all lmao still 40 fps with a 3080 ti
no fix ?
Went to sleep, what did I miss ? 
nothing
really? i got 1060 and it runs well for me
@lyric escarp did you turn off reflections and ambient occlusion settings?
because they are set by default on epic
u can update ur graphics drivers or restart ur pc
i mean the update gave me way better performance, dosent really help when i crash every other time i shoot a guy
lol, so dlss still not working after the patch
but other than having download issues the game runs fine while having constant 90 fps with a 6600xt
it wasn't working even before the patch
its working before the patch
@grave tapir They have confirmed DLSS is only using quality atm
if there is a problem with dlss why not just remove this setting from the menu
It still works, just on quality, in the meantime just use FSR
- I believe frame gen works for some users even if DLSS is on quality
nah, dlss not working at all. same fps like 100% resolution scale
87% before and after )
nah i tried it but it didn't work at all
at least now i can get better fps but the only issue is the freezing
AH, just noticed Known Issues list, thanks !
Do wonder if this is new since hotfix or was always there, since I believe Alan told me it works just fine the other day 
Being gaslit by a developer just like during my dayjob 
fsr working, but looks bad
turn it off and lower your resolution scale to 60
we break to make it better 
however only 87% now hahaha
alan do you know what causes the freeze?
close to a door in lawmaker and valley?
i got few clips of me getting the freeze bug it might help you
Or is this one of those "Cannot reproduce in PIE, Resolved as Fixed" ? 
no in every map door or shooting a suspect freezes the game
i wish i had something in the past month that was able to reproduce in PIE 😦
there is a bug with one weapon
Yknow i just did 23 megabytes and twisted nerve without crashes, either im lucky now or it happens less often
Classic Unreal 
really? what is it?
Still the same.
because i get freeze bug on everything not just one weapon also i was testing on 28 megapites map
SPC9
What are your graphic settings?
all on mid
85% sweet spot for me, that setting normal works from menu now?
menus look normal the resolution scale only effects the game world
i set it on 60 resolution scale and i get around 140 fps
i mean, do i still need config my user file in game folder
nope
it works now in game
After the new patch, should I be using dx11 or dx12, rtx 3060, ryzen 5 4500, 32gb ram, game on an ssd?
Even though it's no difference for me if it's on epic or low. Game just freezes in a mission
better use dx11
also loading time now is faster
even with the new PSO system?