#tech
1 messages · Page 52 of 1
well i did it through devices and printersa
how would i ss?
use snipping tool ig
restart?
Alright, gimme a sec
So?
Just ordered this instead of the Trackir anyone haave one?
no but it looks cool
anyone got any ideas why none of my apps are updating? im using an apple ipad and iphone
i was speaking to a guy in cork lol
in what now?
Haha no worries
can anyone recommend me some headphones?
What country are you in? @sand valley ?
It depends on where you live but I'm in the UK and these are great and cheap: https://www.game.co.uk/en/the-powera-fusion-wired-gaming-headset-sapphire-fade-2640065
I'm in Bulgaria
I'm thinking of something like Hyperx Cloud II
That kind of quality
Corsair HS35
I have the cloud revolver S and it's great for not too much money
SteelSeries Arctis 7 here, though you could get the Arctis 3 if you wanted a wired only headset
I love the Arctis 7. Mic not bad, audio playback not bad, battery life not bad. Well balanced all around
steelseries make good headsets for gaming... I replaced my razer kraken with an arctis 3 and im very happy with it
Does anyone know how I can get my router to prioritise my PC over other devices in the house?
I know some routers allow you to set different devices to different priority levels such as high, medium (default) and low though this is only on certain routers. I don't know if there is any other way of doing it though
I think same like Steve. You can just set it up through your router setting and just some of router can do this. Maybe you can set your router setting for the other device for speed connection, like your PC full of bandwidth and other device just half of bandwidth and you can do this to all router.
@light palm
a cautionary tale I guess https://twitter.com/3ventic/status/1246875672007581698
Also make sure you don't block the only vents that they put on laptops on the bottom. Blocked vents, no heat goes out. Just made an easy bake oven in your lap.
🤔 F@H says i'm getting an estimated 1.1mil a day but i only get about 30k per gpu job that takes 2hours ish 
oh well, see how it goes tonight, good thing its cold because i got a space heater in the bedroom powered by intel
nice monitor
Thank, 21:9 2560x1080 27 inch IPS @75hz
Its budget but better than my old dual 1080p setup
Is it normal not to get WUs for GPU in hours?
I only got one or two WUs for GPU in one week, so 
Fair enough, thanks
How to fix
It takes forever to load up 1 thing
That shut down thing took 2 hours to pop up
Ill probably sit through 3 restarts before shut down
check your HDD/SSD
press and hold power button untill your laptop shuts down completely, remove the battery + power cord. Press power button 5-6 times, plug the battery back in and the power cord. Power up your laptop.
That is ofc, if the battery is removable.
After that, google GSmartControl. And check your HDD/SSD
if not, just hold the power button till your laptop shuts down and power it back on
I aint touching something that i dont know how to do
Last time this happened i couldnt use it for a whole year
Then take your laptop to a service center and don't ask for help online if you are not willing to perform basic actions
- a good thing if your laptop is still on warranty

finish up this last CPU WU and then jump on TMP, going to look into getting a new GPU and using my old as a 24/7 folder
I cant view my pc because it noaw black screen boi
One time I hit the cable in the back of my desk with my foot by accident, the monitor was still plugged on power, but not anymore on PC
I was in the middle of watching a video and I was like BRUH

Stoopid
That happened after the Windows update?
No?
Oh I thought it was an update, I saw the screenshot of the blue screen and didn't pay attention to what was exactly on it 
Black screen can be...
Hmm
@mystic blaze
The whole thing was lagging after trying to reupload a video so i restarted then shut down
Hmm, forced shutdown by holding the button?
If you press numlock or caplock, does the light appear?
Ah ok, you tried to do ctrl alt del?
maybe the screen in unplugged from the rest of the laptop
but you'll have to open it to check that
Yeah it can be a broken connection too... if you use it so much for several years
Ah ok, you tried to do ctrl alt del?
@turbid vapor bruh its blank nothing works
I cant even forc shut down
Nothing happens when you hold the power button for at least 10 seconds? If you manage to force shut down, unplug the power adapter for at least 30 seconds
For beginners you need to hold the power button down for a long time, your computer isn't Posting which probably means its hibernating not shutting off @mystic blaze
It looks like an all in one with no drive so its probably not a hardware issue like a bad harddrive issue, if you power off correctly and turn back on you should see the manufacturer logo, then it will start to load Windows, let us know how that goes, if you never see windows start splash or spinning circle that is also important information to let us know, if youre sure it's properly off and you dont see the BIOS logo let us know, if you can plug it into a tv and it's still black when turning on let us know that too
If it does eventually load Windows it might be a full drive or a bad Windows install
The capslock and numlock no longer work
That's alright, you need to ezplain exactly what you hear and see, even if its just a blank black screen or a beep
Also remember you have to hold the power down to turn off for at least 7 seconds, try and use a tv for a monitor if laptop has hdmi
@brittle mountain I feel it would look nicer if the top monitor was centered in between the 2 monitors like on the top but centered
🤔
@hollow drum it can't be in the middle since both right side monitors are on a single one-pole stand
@mellow locust no sound
@hidden shell
It supports 12 "buttons" but it also had joystick control input. It's one of the cheapest ones. If it works out how I think it should be fine.
@chrome prism I bought 2x the newer version.
https://www.amazon.de/dp/B07BQK88N3/ref=cm_sw_r_apa_i_G6tJEbZS7RB8Y
In case u r interested. But at the end both are the same...
Oh right on, Yeah I like that one better no wire running out of it, just a plug on the side of it
They are very nice. Very good soldering quality, no sharp edges etc. :)
Thanks for the heads up, that's great to know! Mines still delayed, Did update my shipping time, said it should be here a little quicker but not by much.
Good luck. :)
Thank you!
Hit the beta branch of folding, got an 8 hour gpu task
Just in time for me to leave for an 8 hour shift
👌
@dusty timber you know, if you were to give out a role or badge for folding we could put the team into the top 500 teams
Hey anyone ever do anything with windows server
Anyone know where to find this cable online? It snapped
What PCB is that?
Is that your motherboard?
It’s connecting the power button
Is it possible to just reconnect a new cable there and just simply plug it in?
Because it doesn't look like you can do that
why did you take apart the laptop in the first place?
Got it for free
I think you'd have to send that back to the manufacturer to fix that.
Well, you would have to send it to Asus, not Microsoft
They are gonna want to charge me 50 bucks for a 5 dollar cable
and you would have to pay them to fix it
It doesn't look like a cable that can be reconnected at least. Maybe you can find a cable to replace from another board, but then you might need special equipment to add the cable to the board
Can you post a closer picture of the cable?
was it working when you got it?
I just want to get the cable and take it to a computer repair place and have them hook it up
Yeah but it was freezing and crap like so bad that you have to restart
but why would take off the keyboard though if it's a hardware problem
Try to scan that QR code
Let me clip on my macro lens 
And find out what brand and model that thing is
Doesn’t scan
Was able to get this though
Also that’s just the sticker for that component
it just looks like a nth pin ribbon cable
unplug the other side and count the pins on the ribbon
if it's just a 6pin .7cm wide cable you can get one off ebay
@stuck grove if you tell me the model number, i can probably find the exact cable on ebay
@mellow locust ATHEROS/AR5B125
mate that is the wifi cards name
what does it say on the bottom shell of the laptop
Old School Book
I still have my Windows 98 booklet
ours
https://stats.foldingathome.org/team/250445 @mighty vine
Uh
My monitor is horrific now
Barely had it for 6 months and the display went sicko mode
Virgin Media having issues as always. Wish I could replace this crap with my own, but tried and even with a modem for the fibre connection it's a nope
You need to setup a thinkbroadband ping monitor to see how your connection actually is
Compare 500+ broadband deals from UK service providers. Broadband news, reviews and speed test from the longest running and trusted independent broadband information website (formerly ADSLguide.org.uk)
I'd also consider getting a new router, switching the Hub into modem mode and using that, for wireless performance it'll blow it out the water
Thing is it's the hub itself that's the problem. Random restarts or it will just sit red all day before finally connecting. It takes over 10 mins on a good day to work after a restart. Virgin media have beenout 3 times for this now and it's still a problem but works fine when the technician is here
Of course, it always works when the technician is there 
Just wondering - does anyone know what the port on the right is used for?
I just realized it is pretty different to the regular HDMI port next to it and would like to know what I could use it for.
I use display port for my 4K monitor
Ah... Thanks!
displayport is usually the way to go for high res/high framerate monitors, as sometimes hdmi doesn't have enough bandwith
Got my button box complete, buttons aren't aligned, and I don't like my labels but she's together and works!
That's pretty cool man
If I was to do something like that I'd be tempted to swap those switches for rocker switches and trims https://www.ebay.co.uk/itm/RDX-K-Switch-BLANK-Trim-Surround-Panel-Defender-Dashboard-Console-Kit-Car/233325022268?hash=item3653414c3c:g:hswAAOSwsnVd25hi
So something like that
Yeah you can, it hooks up via 2 wires. Tbh plug and play
Just wondering - does anyone know what the port on the right is used for?
I just realized it is pretty different to the regular HDMI port next to it and would like to know what I could use it for.
@dusk tide I only use Display Port lol.
What's everyone using for monitors? Recently broke one of my two 24 inch monitors and looking to replace both. Any suggestions welcome!
Perfect opportunity to upgrade to 27" or 32" 😉 I recommend the XB271HUbmiprz if you want a solid 27" 2k 144hz monitor or the XB271HK if you want 4k
I'm using an 34" 3440x1440 ultrawide
I have a 32" TV I used to use but it didn't support anything more than 60hz
i don't really use the 120hz on my monitor and my monitor can go up to 165hz but i never do that cause i don't wanna max out my GPU for hours at 100% usage
Went back to my TV for now, it's hard going from dual screens to one so one 32" and my other 24" Curved lol
What's everyone using for monitors? Recently broke one of my two 24 inch monitors and looking to replace both. Any suggestions welcome!
https://www.mindfactory.de/product_info.php/27Zoll--68-58cm--Acer-V7-V277bip-schwarz-1920x1080-1xDisplayPort-1xHDMI_1247716.html
I use that one. (2 of them atm)
@spiral yew wait, what ?? What does maxing out your GPU has to do with your 165hz monitor ?
my recomendation is the aorus cv27q @chrome prism
or the ad27qd
or if you want a bigger monitor
this is a good option
AOC Agon AG352UCG6
I use an Acer Predator X34p 🙂 Perhaps that's out of your budget, but ultrawides are very immersive for gaming
@hexed lion the higher the refresh rate or hertz your monitor is the harder your GPU has to work to keep up with those frames
@spiral yew Lol. That's so not true. Your monitor has nothing to do with how much frames you have. 60hz or 160hz, your GPU pushes the same fps. Only difference is the 160hz monitor is gonna actually display those fps instead of being limited to 60.
i noticed a 20% GPU usage going from 60fps to 165fps
You mean hz ?
your monitor does dictate the frames when using vsync
Don't see anything wrong ?
What's wrong with 100% GPU usage anyway? As long as it's not like that at idle then
u got a GPU, might as well use all of it
Yo, looking into new GPUs as I'm running into vram limits with my 1060 3gb. Not looking at anything over £300.
Been looking at these https://www.amazon.co.uk/XFX-THICC-1620MHz-Graphics-RX-56XT6DFD6/dp/B083FWMZ8Z/ref=sr_1_5?dchild=1&keywords=AMD%2BGPU&qid=1586963120&sr=8-5&th=1
What's your thoughts on these?
it's good
yeah, that's a good gpu, but I don't know how good is the cooler
The 5600XT is a good card, but for about £60 more you can get an 5700XT these days
and it's definitely worth the extra amount imo
60£ ? more like 100 extra £, even if it's worth it...
that's what I just said, 100£ more than the 5600 😅
Whoops, my fault. I meant 60 more than the max 300
idk if XFX is a good brand though, it's not very common...
I got this one in my build https://www.amazon.co.uk/XFX-Thicc-2025MHz-Graphics-Rx-57XT8TBD8/dp/B07ZP5QZX2?s=computers
it's an absolute beast, the cooling is perfect
fine then
the 5600XT is good dont get me wrong haha, but consider the 5700XT as well 🙂
check your psu too, just in case, especially if you go for the 5700XT
haha that's very true
the recommended PSU for a 5600XT is 500W, compared to the 400W for a 1060
that doesn't means you absolutely need a 500W psu, but it might not work properly if you have only 400W
Hmm
I don't want a GPU were cooling is going to be an issue
I have pretty good case cooling
but if it's gonna be throttling regardless
full size GPUs don't throttle
they're always cool enough to keep their maximum performances
but some will be at around 60°C, some others might stay around 75°C
and they will make more noise too
but if you've got a good case cooling it should be fine
i've had 2 XFX graphics cards and never had an issue with them
Ok so another GPU I've been keeping an eye on is the 1660 super or ti. Are they similar in comparison, I see some review sites say AMD is superior whilst other says Nvidia is superior in comparison of those two cards
they are similar
@distant zodiac I suggest you use user benchmark and you can compare two gpus against one another
the rx 5600XT is definitely above overall
it's closer to the RTX 2060
and even above in some AMD optimized titles
Yeah, gonna hold off for a bit and see what's happening after lockdown
id say do the exact opposite myself
userbenchmark is extremely inconsistent and theres little to no verification for sending results
theres plenty of cards it gets spot on, but theres a lot that are wayyyy off
however if youre looking at a 5600xt, with something like a 2600 or more, the 2060 normal and 5600xt are tit for tat on average
and if the question is 5600xt vs a 1060 6 gig, go for the 5600xt any day especially as the drivers get better and better
the 1060 is his old gpu iirc, so no comparison there
ah
hold on
Imaginative are you doing that weird non k overclock on a nice board thing from the early bioses?
absolute flex
id love to give it a go but i know id probably struggle to find an unupdated board
and just buying like a ryzen 1400 and a cheap board would make more practical sense
I can push 5GHz on my i5 6500 but it's scary voltage to be stable so keep it around 4.6/4.8ghz
Considering stock on these cpus is 3.2ghz with 3.6ghz 1 core turbo then that's not bad at all
how bad is it for cooling?
considering these arent really covered that much, i dunno what to compare it to
Not bad, I don't hit over around 65c with my artic freezer cooler
stock cooler would have a meltdown though,
thats pretty good then
Fairly beefy cooler and good case cooling helps alot
thats not even a really high end arctic one then
It's not low end, more mid range. 6 copper heatpipes and a huge fan. I have the bracket to install another fan on the otherside but no point with the amount of case fans I have lol
i know what thats like, although that will still perform better than my 212
just big, with a big fan
yeah 212 hits 90c and throttling issues for me. Same thermal paste and everything. Spec wise a 212 should've been good enough but appears not. I assume I'm pulling a fair amount of wattage
Also the 212 and artic, the one I'm using, share alot of similarities
im suprised it lets you go up to 90, thats pretty high, i wouldve gexpected low 80s before it throttles
this bios is questionable lol
so I have to be careful. I have no integrated gpu support, no turbo support and sensors are a bit off
is that just it being an old and not great bios, or the overvolting though?
The bios is old, and modified
Got it from here https://play3r.net/news/overclock/overclocking-news/intel-non-k-processors-can-now-be-overclocked-on-z170-bios-files-inside/5/
Well that's the re-upload of it anyway
I was following it in a forum that died
Few things don't report correctly e.g the second set of voltages is incorrect, the first set seems correct.
Frequency is a few hundred mhz out of what I am running it at, reports correct in bios itself
One of the temp probes is messing about at -54 lol
and it reports 6 cores
thats probably the biggest thonk there
them voltages arent as crazy as i expected though
1.320v vcore, to get stable at 5ghz I have to really bump it upto 1.46v at a min
There is a massive voltage difference for little gain
i was expecting like 1.5 just to get it to where it is tbh
nah, I set it at 1.4v at the beginning and then reduced it to where it is still stable
Only tried 5Ghz a few times, and further but voltages put me off
and ram timings become a real pain to manage
thats not too suprising
2133mhz ram at 2613mhz is pretty good too
i was just gonna ask what your board took
but yeah when youre working with relatively low end ram its pretty impressive it clocks that well
Made sure to go with something branded, Crucial make some pretty good ram that overclocks nice
unless you went out and bought like 2666 just to run it slower and then clock it back up
https://www.userbenchmark.com/UserRun/21016799
Obviously CPU reports base clock at 3.2GHz as it is, just the multiplier is the overclock. No way getting round that as it's a locked processor but 100th percentile is good for me lol
Oh and custom bios on my gpu, also getting 100th percentile there lol. Basically upping the power limit on the final power state
i see youre a man of my heart
small ish ssd and then an ancient hard drive
but then absolutely thrashing me with the cpu
That's an older benchmark, but I've only added another bigger ssd since then and get the same score
bigger slow storage as not everything needs an ssd
Plus I have loads of cloud storage so no need for anything more than just games really
and resources I need quick for cad
hwut
how do you have 5 terabytes of cloud
that would be hundreds a year with google or mega
University and a contact with Microsoft gets you along way lol
gg
That's also lifetime, so it'll never expire
Anyway, back on topic. GPU, kinda the weakspot for me as it's only 3gb vram. Gonna hold off for a little, either end of lockdown or payday which ever comes first lol
yeah id agree there
ive got a 970 which is complete overkill atm, but i know when i upgrade to a more modern cpu it'll be pretty useless
i had a mate with a 2700x, bought it as a prebuilt with a 1060 3 gig
970 still has more vram lol
ah perfect loophole 😂
anyway he said sod it, and moved to a 5700xt
Nice
and hes pretty happy with it at the moment
yeah
Well gonna head off but I'll let y'all know when I make a decision or pester you for more gpu info lol
anybody know how to restore a default app, i opened .oac in notepad too change a line of code and now the dam thing doesnt let me put it back to nothing
Maybe try and search Default apps in settings
It should give you a "default extensions" or smth where you can change how you open all known extensions
tried that
Assoc .oac= at the command prompt
Its Running
what are the graphics cards?
and is that a jet cooler?
or is that the light making the back half fins look mmore like plastc
Why you even need 3 GPU'S?
Folding @ Home maybe
no, looks like GTX580/680s,s o you need them in 3-way SLI to run ETS2 ultra 😂
Been looking between the RX 5600XT and RTX 260. Trends show the RTX 2060 has launched up in price recently but hopefully they should go down again after this Pandemic. The RTX looks a superior card with more features so will wait for that
Well there is also the rendering engine, and I rather like shadowplay
So I used to be able to run my game at 400% scaling, and even 900% scaling with around 50fps a few hours ago, but now suddenly my game is running at 7FPS with 400 scaling. Could that be a hardware issue?
Do you have a graphics driver update maybe cause I know Nvidia launched one
i had that happen a while ago, game went from running fine to not running at all with no driver update or anything
check your usages, are they extremely low compared to what you are used to
Nah, it was at 98% GPU usage when I checked it for like 5 sec
I will try to update my drivers
@distant zodiac the RTX 2060 SUPER should be at around the same price as the non-super variant. take a look
@distant monolith if you opened task manager then it came up with 50+ usage when your not using anything it is a windows problem nothing with drivers or that i have the same problem with my gtx 1070
you wont find a super for the name price as a non super, its sort of in the name
I updated my drivers and it got fixed. Thanks for the help you guys.
@hexed lion Yeah they should be, gotta remember I'm from the UK and they all seem out of stock atm which has bumped up the prices on all the other RTX2060 / super cards for the time being. that are in stock
No doubt due to COVID-19, so best waiting for stocks to replenish in time
ie in stock but inflated price https://www.amazon.co.uk/MSI-RTX2060-V375-035R-Graphics-GeForce/dp/B07MVZM78T/ref=sr_1_2?dchild=1&keywords=RTX+2060&qid=1587235937&sr=8-2
Alot of the reviews mention amazing under £300 when it's over atm
Ugh, yeah that sucks. Could check the second hand market too tho ? I've bought 4 gpus so far from a second market site, all worked exceptional.
Especially now that gpus aren't used in mining anymore
I have been tempted by second hand but really would prefer a warranty when buying this sort of stuff. No doubt I'd sell on my GTX 1060 3gb as it's still a fairly nice card for someone looking to upgrade from something archaic
Yeah, i get you. Myself i never really cared about warranty 🤷🏼♂️ Never had a problem with anything so I guess that's why
Yeah, I've always been one for a warranty when I can't physically test something in my own rig. I just feel awkward testing something on someone else's rig running software like GPU-Z, Furmark, etc and then saying it's no good lol
The opposite I can say for pre-owned cars as an example, as it's an expectation that when I test drive it, I will be putting my footdown, whereas those with PC components I've found really don't like you to do anything else other than plug them in and the fan spins or something lol
Lol. I've never tested anything haha. Just ordered hoping it's ok. Guess i have good luck
Plus with the virus making the rounds right now, it's probably not the best idea to be searching the pre-owned market lol
What's the price in uk for a new 2060 super ?
The Gigabyte windforce model
Cuz that's the one i checked here
When stock levels dwindle the prices are inflated, it's not actually out of stock. Amazon are likely not selling there wider stock to protect their staff, etc. It's likely on a shelf in Amazon but they won't sell them during this pandemic
Still blows my mind. I paid 480 for my 2070 super
PC Partpicker UK shows this as the cheapest RTX 2060 Super available in the UK
However on the website the price is different
Can you check the "original" price ? Don't remember what it's called
I'm on my phone and lazy haha
According the Techradar the RTX 2060 Super was $399, about £315 on release
A founder's edition is actually cheaper
Lol
The founders edition looks really nice
Better than the last gen blower style coolers by far
Yeah
founders are cheaper though because theyre worse 
i mean its not by much, but its still better to go for a non reference
Yeah ^
I got the Strix RTX2060s, and the cooling is way better on this on I believe
Took out my current gpu to get some compressed air on it and took my fan stickers off 
for a second I thought the fans were gold lol
then that would just be showing off if it was gold lol
Haha that would be cool, but they are just tinted transparent and dusty lol
1024x768 vs 4K?
1080 vs 900 on mine fits nicely considering the screens are about that size relatively anyway
@brittle mountain. Correct
man, i miss 1280x1024 ...
Any recommendations for a decent monitor, I wouldn't think that I need more than 60HZ considering I play a very limited amount of games. Somewhere around £150 would be ideal.
This is the one I have 😄
60Hz and £150 😄
Really good quality monitor, served me really well 🙂 @light palm
I have two of those, thinking of getting a 3rd, they're that gud 🙂
Thanks, I'll have a look into them, probably just buy the one for now and use my current monitor as a secondary. 👍
seems expensive, especially considering it doesnt even have a displayport in
I use HDMI anyway, not too clued up on it all anyway.
I'm with tdp, that seems rather expensive for a 1080p60 panel
Also with it being 27 inches at 1080p, it'll have less pixel density than a 24 inch which will look sharper
yeah, that panel is really expensive... and it's a TN panel... you can definitely have a better monitor for that price
I wouldn't recommend a 27' panel either, 24' is enough, especially if you're sitting close to your monitor
Nah you can't really say 24 is better than 27, the only positive of 24 at 1080p is better pixel density. In every other way 27 is better
it's not really a matter of pixel density... you shouldn't even be able to tell the difference between 24' and 27'... it's just that picking a 27' monitor isn't the best idea if you don't have a large desk
and a 27' monitor is also more expensive
what i have for my primary screen https://us.msi.com/Monitor/Optix-G27C4
On 1080p 27" will be pretty pixelated but not so much on 24 @agile ermine
Although you're right in the fact that you do need more room for 27. It doesn't sound like much of a difference but 27" is quite a bit larger
imo if you can see the difference then you're too close
My 27 next to my 24
are you sure this isn't a 22' ? or is that just a depth effect ?
because it looks similar to my setup, and I have a 22'
Might be depth effect, it's a Dell E2417H so definitely 24" (23.8 i believe to be precise)
oooo that's very similiar looking setup to mine
yeah, on the pic your second screen looks really small
@light palm what's the distance between you and your monitor ?
Probably about 1 and a half foot, quite close. Need to order a new desk too, everything has basically been put on pause though.
I think two 24inch monitors will be fine, for me anyway
works fine as a secondary monitor
Left is 16:9, right is 16:10
Right display is only 1440x900 but it's colour calibrated. I know it's a dell but accidentally melted the sticker with model number when cleaning it. Probs not my greatest moment 😂
is that really 16:10?
I can up the refresh to 90Hz but it doesn't like it via DVI, I broke my display port cable 😦
Moh, Ikea. This wasn't even the largest. I just got the largest I could fit in my car, it was proper close. Had to push forward the passenger seat as far it would go lol
Y'know cause delivery would've been 2 weeks and I can't wait lol
My old left monitor was 4:3
right*
That was last year
and old desk
Welp, time to do sth useful, instead of playing games all day 
@wide temple I have done it
sorry for the ping but...
@leaden swallow Has RIseN
(I remembered the password)
?
I am much confused
we still have our 2x3m desks we were using with 3peeps... but our son now has his own PC Desk... but my wife didnt use her brain... 1 Screen is gone... and she takes her PC Case from under table, onto the top of the table, so... still not more space for her xD
... but there was a topic about computer desks
and the guys german, hence the slightly rough grammar
like why are you so violently angry about what this guy is talking about
Some people are so ignorant
^
Finally got myself some new NVMe drives 
Damn
would anyone be able to help me with wheel advice?
i can get a thrustmaster TMX Pro from a friend for about 100 euro. is it a good wheel? or should i go for a g29 which is quite a bit more expensive
u should go for the thrustmaster because its cheaper from the internet and from ur friend like 80 euro's
the g29 is about 250 euro
Just ordered this, opinions?
Not looking for anything extreme, just sort of entry level 4k
Rather expensive imo
Cheapest one I've seen around atm for 4k was £200 but it didn't have HDR and freesync
99p off what a steal 
aye defo lol
Was looking at reviews, seem mostly positive. If it's not any good then I'll just return it
somehow
Today me and my dad decided to plug in the Powerline Extenders and give it a try.
Firstly w/ use of those devices and Horizon TV decoder to create seperate WiFi.
Unfortunately - the speed of this Internet was much slower than existing WiFi. 
But then we plugged in internet cable to TV and well...
Everyone was astonished at the speeds (almost like normally plugged into the router).
Idk however why the internet speed was much slower on this Horizon's WiFi vs WiFi that I had behind a wall... 🤔
Those powerline adapters are really good, provided you get good spec ones. I've had TP-Link powerline adapters for a number of years and rarely encounter issues with them, only things like a vacuum cleaner can cause havoc with them
don't need powerline adapters when your basement is unfinished
Well - we will see... I have from TP-Link, w/ support for HomePlug AV2, so that's cool.
Cancelled the order for that 4k monitor. Found it better to get a 1440p monitor with 99% SRGB coverage, IPS panel and 32"
Powerline adapters are only as good as the electrical wiring in your house. If the wiring is bad, no powerline will be good enough, at least in my experience.
4K monitors are kinda pointless for gaming anyway (which is what I presume you're going to use it for).
Hmm so my dad and I are currently working on pulling some electrical cables in the garden. (fairly heavy cables since we are planning on using garden equipment which can pull some watts) however when we are just sitting in the garden we have a very spotty WiFi connection. So maybe running a powerline would be an idea?
The other idea we talked about was drilling a hole in the wall in my room (my wall is facing the garden and has a second access point) and putting a wall mounted directional access point aimed at the garden
Gone for this monitor https://www.cclonline.com/product/viewsonic-vx3276-2k-mhd-monitor-32-inch-2560-x-1440-qhd-ips-panel-75hz-grey-vx3276-2k-mhd-254493/
Reviews seem rather good, and the price for something of this spec is pretty good
4ms response time time is meh
I do alot of CAD work so response time isn't a priority for me, screen realestate is so 32" 1440p should still be sharp enough and I have a big enough desk to push it back enough to not be a strain hopefully
I will game on it too, but 4ms isn't too bad
My current monitor is 3ms and tbh I don't notice it
I'd need to have different monitors and compare it to really see the difference, but atm my 4K is 60Hz and 1ms
@upbeat shore I'd recommend looking at getting some proper APs (enterprise/prosumer grade) rather than consumer rubbish. Take a look at Ubiquiti's product line. The NanoHDs are very good for their price, the only thing you need is a controller (which can be run off any PC and only needed for setting up)
is anyone else having issues with recording in euro truck simulator with Radeon recording?
https://www.fractal-design.com/products/cases/era/era-itx/cobalt-tempered-glass/
This looks stunning
not enough airflow
It’s mini ITX, it’ll never have good air flow 
Hope they make an mATX version of it with a glass side panel
and have the front with one 140mm fan
for small office editions, i really like the Lenovo Solutions. Just a small PC and a fitting Screen where you can slot in and just need one Power Supply...
Is it correct that it shows 2133Mhz? I got 2666Mhz RAM sticks
Did you enable xmp profile in your bios?
Someone built this for me, and I haven't been in the BIOS yet, so I don't know 
so probably not. Go there and change the setting
Also another note, some motherboards only support certain clock frequencies, learned it the hard way with mine when trying to run 3400 and had to do 3200 
Ps: I haven't had a bsod since the last two times it happened
Has anyone heard of the malware analysis site Hybrid Analysis?
It's used by cyber-security guys to see if an application is infected
Sometimes Win a not completely sur with the telemetry data. (Bit) Try to look up in the Program CPU-Z. It’s a free ware program an can read out you PC better the no other program.
Or if LordBenji right search in the internet according to your Mainboard
@distant monolith at the moment you take the photo dose other programs running in the background eg a game ?
Yeah
you can't buy DDR5 ram sticks
I use DDR9
Yes in Ian the emperor of China
Overclock to 8.1Ghz
Respect
With lequid nitrogen
With all the cores active?
nope ocing in those cases are made in single core mode
Ye thought so :)
so high, and yet so far from the highest clocks achieved...
the record is around 8.8GHz iirc
some very high clocks have been reached on all cores though... der8auer pushed an i9 9900k at 7.6GHz all cores... on liquid helium
I think then it’s easier to wait for a Quantum computer
Or you doing the same like Seti@Home. Use only all computer over the world.
problem with this cooling methods and these over clocking records: u cant use these machines for longer work or even gaming or smth like this 😛
well, that's not really... practical 😅
ye... when i would starting building a setup like this in my home office 😄 my wife would slap me out of the house
the thig is, it's not even usable, because you constantly have to add some liquid nitrogen/helium
which is quite expensive iirc
Quick question, Im trying to save up some cash to get a GTX 1070ti, but my friends are telling me "well if you do that, you might as well get a 1080." Is there really much difference between the 1070ti and the 1080?
in Short: the 1080 has about ~10% more power... but the 1070 ti is 30% cheaper
Today I was a bit productive. I changed the JoyCon housings of my causin's switch from red/blue to light pink. 
Ok so reached a bit of a predicament. Got a good high quality DisplayPort cable and I can now finally select 10bpc colour on my main display, the issue is at 60Hz. Anything higher and it reverts back to 8bpc colour, even when using custom resolutions.
HDMI doesn't seem to support 10bpc with any setting, so DisplayPort is my only option here for 10bpc colour.
Any ideas on how to get 75Hz with 10bpc colour?
check the user manual of you monitor. Does it support 2560x1440/10/75HZ or only 2560x1440/8/75Hz?
Could also be that the DisplayPort Port is an older Standard (pre-1.4) and therefore doesn't support a higher Bandwidth which is required by higher res, framerate or hdr
Hmm will check that, was pretty sure it was supported
DP 1.2 is still pretty common even though DP 1.4 is already released for quite some time
ipv6 was released in the late 80's and is still not common 😛
The specs don't state that the monitor does support 1440p/75Hz or even 1080p/75Hz
so you're locked to 1440p60
It does do 1440p/75hz as I had it on that using HDMI, but using DisplayPort I have access to 10bpc but not 75hz/10bpc only 60hz/10bpc
The moment I select 75hz it goes to 8bpc and 10bpc disappears from the drop down in Nvidia settings
Issue using HDMI is the monitor doesn't support 10bpc at all
then return the display and buy a different one
or send an Email to the Manufacturer Helpdesk/TechLine
After reading some fine print I could find that the cable is DP 1.2
It should be good enough for 1440p 75hz 10bit
Yeah it supports that, but Nvidia goes nope. Maybe it's an Nvidia thing? I know 10 bit colour used to be quadro cards only until rather recently
It shouldn’t be an Nvidia thing, unless you have an old GPU
It is more likely your monitor just doesn’t support 10bit@75hz
Only 10bit@60hz
im realizing its nearly impossible to find a 120hz monitor for under 200$ 😦
Most are sold out?
Got it running 75Hz with 10bit 1440p
There is literally a setting in the monitor menu to enable 10 bit colour. Then it suddenly accepted 75hz with 10bit at 1440p

Do yall think that the Logitech G29 would be an upgrade from a Thrustmaster T80 Ferrari 488 GTB edition?
well, if I can figure out a way to unclamp the Thrustmaster from my desk since the plastic handle broke off
@nova agate I have almost the same exact wheel except its not the Ferrari edition. My clamp actually worn down so much that it wont stay anymore.
Has anyone here worked with Premiere Pro before?
The G29 is very nice wheel which I would recommend. Had mine for a few years after upgrading from a Logitech Driving Force GT
I would recommend trying to get the shifter in a bundle as they can be expensive for what they are on their own
^ The shifter is honestly complete crap. If you can get it free with the wheel then go for it but I don't recommend shelling out extra for it
I'd say it's ok, but defo not worth paying extra for^
Only reason for me was upgrading from a Driving Force GT, kinda needed that to make it worth it
The reason I want a new wheel is because the Thrustmaster T80 Ferrari 488 GTB edition has roughly 200 degrees of steering
I also have a Saitek steering wheel, which is a 900 degree wheel, but because its based on a no driver system, its not gonna work for games like Assetto Corsa or MudRunner
gav if you have the farm sim wheel it's wasn't made to take the abuse of a driving game like ets2 or ats
Would going from a Hyperx cloud 1 to a Hyperx cloud alpha be worth it? The alpha is second hand but still as good as new.
the cloud alpha it's better in audio quality
the microphone it's the same as all the hyperx headsets
How can i dual monitor for the game to be displayed on both monitors
Ok i know how to do that but will my gpu fry coz im on laptop
monkey dual screens won't work correctly on ets2 or ats
But will it fry my gpu if i have discord on one and ets on the other
Having Discord on 1 screen and ets on the other shouldn’t fry your gpu
But im on laptop
Discord is very light weight so it shouldn't impact your pc that that much
especially since you're on a laptop, the cpu integrated chipset will be used for the 2nd monitor while your dedicated GPU will run the game
Unless he has no dedicated gpu 😛
if he doesn't, then his laptop is gonna fry anyways, secondary monitor or not
Is it worth buying the Tobii Eye Tracker for ETS2, ATS, and FS15-19
Comparison between my old 1030 and my 1660 s
Ooh, nice
Did you have something in the background? CPU threaded scores seem lower, either way a 1660 is alot better than a 1030
nah them cpu scores are identical
1 or 2 percent is really nothing
if you ran it 3 more times with the 1660 i bet youd get one with higher scores than with the 1030
Decent keyboards? Not bothered if it’s mechanical or membrane, although mechanical would be better. Wouldn’t want to go over £80, however if there’s something a bit more pricey I’ll consider it.
The CORSAIR K55 RGB Gaming Keyboard features dynamic three-zone RGB backlighting, six dedicated macro keys with Elgato Stream Deck software integration, IP42 dust and spill resistance, and a detachable palm rest. Compatible with CORSAIR iCUE
The CORSAIR K63 features a tenkeyless design and CHERRY MX Red mechanical keyswitches for ultimate performance. Brilliant per-key, red LED backlighting enables dynamic and virtually unlimited lighting adjustability.
I'd go for the K63 that Jeep suggested.
Logitech G413
got 2 of them, they are great value
You should probably look at a few reviews first though
Why do you have 2 of them?
2 PCs
Ah okay
year old picture
Should I get a G502?
They are extremely heavy
for the design maybe
So nah, I wouldn't recommend it tbh
gotcha
There's way better mice out there. Corsair has some really good ones I've heard
Personally I use the Glorious Model O though, because it's lightweight
This is the one I use. The lightweight design, and the glossy texture makes it really comfortable to use.
They have some other sizes of it too now, and an ergonomic version
It's my mousepad lol
i've already posted my setup here so you just gotta go search for it
Redragon Mitra RGB
Huh, I didn't know that the case was plastic.
It's the same on the K55 then, so I wouldn't recommend that either then.
there aren't a lot of metallic keyboards in that price range... that's for the high end stuff
that doesn't means the plastic ones aren't well built
@distant zodiac sorry for late reply but ya i probly had programs open i didnt close everything for the 1660 run 
It's my mousepad lol
@distant monolith how do you have 2 monitors
i have no money for the second
and especially there is no space on the damkn desk
I would need one with a numpad, unless there’s other ways to use freecam

Sign up for Private Internet Access VPN at https://lmg.gg/pialinus2
Use code LINUS and get 25% off GlassWire at https://lmg.gg/glasswire
AMD’s underrated Ryzen 3 series is back, and this time they’re taking aim at the last of Intel’s Core lineup that hasn’t been totally wrec...
Ewww
What?
ryzen
Actually not that bad of a case
1660 super?
yes
i don't like mini or micro atx boards due to not being able to have more than one PCIe slot and not being able to have more than 2 RAM slots
They were the only ones in stock, unfortunately
only that motherboard?
yes
Oki opinions, what should I work to upgrade first? https://i.imgur.com/frv9ZTn.png 
do you have ddr3 or ddr4 RAM?
that's a really balanced configuration...
the most significant upgrade would be the gpu, but it might be bottlenecked by the cpu
Depends on what he gets. My gf runs an i5 4460 with an gtx 1080, no bottleneck
GPU would be the first I would upgrade
Maybe with a 1660ti?
Then unfortunately you need an entire new platform. You can't buy a new CPU without a mobo
Hmmmm.....
Don't thinj that upgrade would be worth it but I'm actually not sure how better thr 1660ti is
it's a bit slower than a 1070
not a huge upgrade
I would at least upgrade for a RTX 2060S or a RX 5600XT
upgrade that cpu
Apparently my ram is running at a god awful speed but according to Task Manager it's at 2133mhz (but also should be running at 3000mhz)
Ok found out my motherboard is capped at 2133mhz so realistically, I should upgrade both motherboard and cpu?
yup
my recomendation is a ryzen 5 3600 with a msi b450 tomahawk max
or mortar max or gaming plus max if the tomahawk is out of stock
you can get a ryzen 3 3300X, too
pretty much the same level of gaming performances as the ryzen 5, but cheaper
but that's only if you've got a tight budget for the upgrades

yeah no
even with how high the 3300x is meant to clock, 4c8t is going the way of the dodo for being able to crank settings up
if you cant swing a 3600, a used 2600 will thrash a 3300x, and itll take a while for enough used ones to be around for them to be a good pick over a used 2400
a 3300X isn't that far from a 2600 in multithreaded tasks
and completely destroys it in gaming
you have to keep in mind that a r3 3300X is basically an i7 7700K
I'd still take a 6c instead of a 4c mostly for future-proof.
Warzone already doesn't like my gf's 4460 bcuz it's 4c
yeah, obviously... as I said, it's only if you can't afford to spend 200+€ on a CPU
also, you can't really compare an i5 4460 and a r3 3300X, the benchmarks shows that even the single core score is significantly higher for the ryzen
of course. I never meant to compare them. Didn't thought about the price tho for some reason. Like you said if you can't afford a 200+ euros CPU the 3300X is very good for it's price.
Anyone online for taking chat with me about tech ?
I just wondering, can y'all give advice about good headshet. I'm looking for durability and adjustable (Cause I got little head so little difficult to wear a big bold or bulky one).
@hollow relic how much are you willing to spend and are you looking for wired or wireless
Better for wired. Just average price. Not too expensive. I got budget for it, but I want to keep safe my money for new car.
i got only ~75% GPU Usage, Encoder usage about 50%, CPU Usage 30-50% and RAM only 60% but still when playing and streaming i got sometimes FPS drops from 60 to 40... dont know what else i could check / test
is your framerate capped to 60? @sand valley
ye
that explains the 75% gpu usage then...
well gpu usage is ok
having a lower framerate when you're streaming is normal, but your cpu might be struggling a bit
i could understand some micro lags if gpu would run at 100%
what's your cpu?
i7-8700K but thats not the problem
6 Core 4,3GHz 😛 and not even more than 50% usage..
yeah, that should be powerful enough...
and im using NVENC not x264 so im rendering with the encoding chip of the RTX 2080 Ti, not even the GPU itself
that happens when you're streaming tmp?
because even a monster pc can't always hold 60fps on tmp...
ye when playing TMP i got 60FPS always just sometimes in cities not, and as everyone has, FPS drops when there are too many players around
Drivers?
Ram?
temperatures?
Does anyone know what this is?
idk wat it is
Google is your best friend
Something I've never ever seen 
I think its from a program, look into the Task Manager and look which Program it could be
i have a ryzen 3
I can still run ets 2 on ultrs
but how to unlock it
Idk
my bios looks like this but a little bit more OEM
add a more modern gui but still looks like this
add some of that HP swag
and you're done
also this is my PC
not at all... if you want some noticeable improvements, you should at least pick an rx 5600 XT
I have an i5 6500
i have some intel celeron thing
has a corsair mouse pad but not a corsair mouse unless that is a new model
It's Glorious
model d? @wide temple
yes
i want that mouse but in my country the stores don't sell it
Interesting design
Anyone online ? I need tech support.
yis yis yor kamputer is infected with wirus
yis yis
we are windows tech support this is kevin how may i help yu
Types in "winver"
Shows Him i have 1909
Nice
it dosent have rgb tho 😦
Mine does
oh yeah
also i'm mass pinging my router just because
okay
Umm okay...
weird flex
but okay
for a minute i thought texas was alabama xD
excuse me?
who likes OnePlus?
i love samsung but i like OnePlus too
I'd get OnePlus 7T Pro
Hey, mate. I need help for my old device. I just back home to my parent's home and retrieve a Acer Nitro 5 AN515-52. And try to make the gaming tho, but recently many item so I just wiped it all using refresh start not a recycle device. And tadaa, everything great again and everyone can use again with my supervised.
But the problem is just for gaming, I got install just few games and got trouble on Siege Games. It's consuming 100% usage. Anyone know how to fix this ? Cause I need stay here for 2 weeks and forgot to bring out my laptop.
My device Acer Nitro 5 AN515-52, Core i7-8750H, 8GB DDR4, and HDD WD Blue 1TB with Intel Optane 32GB with Intel UHD 630 and GTX 1060. Already 3 years old.
I already checked all the system and everything, and nothing else make sense the trouble. Everything just great, just that game. Already try to reinstall, check the validation, and etc. But the trouble just stuck on 100% disk usage for game Rainbow Six Siege.
And 1 more, I cant do with my Nvidia. It's like the system preventing to use the graphics card. So it's always came with UHD or the CPU. Like I'm working on rendering, they just use my CPU not my Nvidia.
Thanks for your help, cheers mate.
P.S. Maybe I wasn't offline, free to dm me on Discord.
Right click your desktop > NVIDIA-configuration > 3D settings
Sorry, I mean the Windows denied my access. I'm wanna try to clean install my Nvidia
Do you have admin rights on the laptop?
I can't always pop up that.
Then I wouldn't know any way to select the gtx 1060 as your preferred GPU
Ahh, it's fine. Thanks for coming.
The most extreme way I could think of would be disabling your integrated GPU by deleting it's driver
But that would be the last option
Finally I can fix the graphics card, just matter of missing file. But still my Geforce Experience still detect but cant auto optimize the game. Now still the HDD 100% usage still bothering me, bloody hell.
Does it cause frame drops?
Yup
I have question
If I have i5 7300hq CPU and 8GB of RAM, is it smart to get another 8GB stick?
your existing 8GB a single stick?
Yup
@humble lantern It came up on Amazon for a pre-order, within 24 hours all of them had gone lol. Though the QC is a bit crap, my right click seems a bit "wobbly"
in my country are only two resellers and they only sell the model O
and it's too expensive
€120 kek
oof, that's way overpriced
They restocked it :o 15 available on the UK site right now
Really not sure if I should send mine back with the wobbly right click
Is this worth the money?
This would be for my dad
Gaming Desktops ASUS Official Store | Free Shipping and Financing Available ROG Strix GL10DH Gaming Desktop PC AMD Ryzen 7 3700X GeForce RTX 2060 SUPER 16GB DDR4 RAM 512GB PCIe SSD Wi-Fi 5 Windows 10 Home GL10DH-NH764, AMD Ryzen 7 3700X Octa-core processor (32M Cache up to 4.4...
His current specs are on a laptop. 8 GBs of RAM, GTX 960, i7-5500U
When he bought it brand new in 2013, it was $1,459.99
@wide temple What is the point of having the holes... I guess airflow but that airflow is just gonna get covered up by your palm anyway...
Weight reduciton
@nova agate that case hasn't a good airflow, if you have an air cooler like the cooler master hyper 212 it will have problems with the temperature
i went for airflow instead of looks with the case i have now
I was looking more towards specs for a prebuilt.
the reason prebuilts are cheaper is due to the quality of the components inside
@scarlet saffron yeah getting a 2nd matching stick would be a great idea
with a single stick you're not taking advantage of dual channel memory
i bet you my dad would just drill more holes
He is quite used to playing GTA V at 15 fps in 780p
recently I bought a new laptop and I think the specs are quite decent on it. What do you guys think?
RTX 2060 6GB GDDR6
i5 9th gen 2.4GHz (turbo mode 4.10GHz)
8GB DDR4
1TB NVMe PCIe M.2 SSD (don't remember the model name, but it has 3.6gb/s read and 2.5gb/s write speed)
250GB Samsung Evo 850 (that one is on the spare slot for a 2.5" driver, I just happened to have windows on that already)
1080p FullHD screen @ 144Hz
oh and the keyboard has a white backlight
8GB or RAM is not that much in today's age, I'd recommend upgrading to 16GB in the future
Ya they always said 8gb is enoph and im using about 7gb on most games nowadays with my graphics. I would recommend 16gb in the future. Besideds that looks good
Thankfully the ram on the laptop is upgradable so I can just get two 16GB sticks or another 8GB stick
but so far the ram hasn't ran into problems on the games I play, mostly because it uses the ram of the GPU to run games, and the GDDR6 speed of NVIDIA is plenty good. GTA 5 on high settings doesn't use more than 2GB of GPU RAM
but for sure when I'll get my hands on games like Rust I'll definitely be needing to upgrade RAM. Thanks guys
Yea my super does a good job but on ets2 when maxed graphics and recording plus chrome discord and other things running i can get close to 7 
@sand valley while GTA V on high uses all 4 GBs of my GPU RAM...
I hear small squeak, not sure if it's my fans .-.
👌
my computer 😳
Nice
ye it goes hard
Do you have an RTX Card?
rx570?
Neat
ye it goes hard
6700k running at 4.3ghz on 1.2v, don't want to push it too hard tbh
at least not yet
can someone help me with my mic, people hear everything from my laptop when i have my mic on and idk how to fix this it is so much annoying
ping me if you can help me
Discord has this fancy new sound cancelling, you can try toggling it on when you join a voice chat @grizzled juniper
it still does not help @steep elk
Is the audio from discord coming through your laptop speakers?
i have headphones
my speakers broke on laptop
so the output device is setup as your headphones?
yes
and people are somehow hearing themselves through your mic, which I presume is on the headset?
yes
Maybe the audio is loud enough that it's leaking and being picked up by the mic
to make sure it isn't a software problem, perhaps mute the audio from the mic and see if people can still hear themselves
even in truckersmp people can hear my music when i speak
if they can hear themselves even when audio is silent, it might just end up being some issue with the headset
well now on discord nobody can hear it finnaly tysm @steep elk
it was annoying me whole years
Oh? What was the fix?
Well, like I said, did you try muting the headset to see if people still hear themselves?
Yeah like turn down your PC audio to 0 and ask people to talk for a bit
then ask them if they could still hear themselves
If they can't, chances are it has something to do with you listening to the headset too loud and audio is leaking and being picked up by the mic
If they can, it's some kind of issue with the headset and I suggest a replacement
in that case, try listening at a very low volume, where you can barely hear them. Then ask again
they still
So they can't hear themselves when you have it muted
nop
but even at a SUPER LOW volume, they can hear themselves?
yes what i just did
Interesting. I'm willing to bet something is up with that headset
Last I bought my first headshet. Yeah the probem like you, just we said a noise.It happen cause the insulation of headphone not too good so it travel the sound to the mic. The only I can fix it, I change the bud of mic to more bigger bd.
Yeah that's exactly what I think the issue is too
Wait, what your headset ?
I think the headphones are just leaking sound, and the mic is picking it up
Hyper X





