I just bought this nintendo 3ds Xl off marketplace knowing it has this issue, the issue in question is when i turn on the device i get a black screen and the blue led, the device doesn’t respond to anything, also the seller stated that it had cfw but i don’t know, he provided the sd card he used with the device but it was formatted so its pretty much useless, any help would be really appreciated, thanks!
#3DS Xl blue light black screen
97 messages · Page 1 of 1 (latest)
tried everything
nothing works
i read somewhere that you can unbrick it with an r4 and a ds
i have a ds and an r4 but i dont find any tutorials on how to do it
You tried every section?
yeah
Send me the hardware test log and ctrcheck log
i dont have those
Did you do the hardware test and ctrcheck?
Whats in /gm9/out/
Are you sure you did every section?
Ctrcheck and hardware test both create log files
Then how did you do a ctrcheck?
You need to open gm9 to do it
Do the hardware test
Do the screens turn on
no
just the blue light?
Does it fade out or snap off
Is there a popping sound
no
yesterday i had it but i checked all the flexes and everything and it dissapeared
i reconnected everything
There's a loose or damaged ribbon cable
Likely the top or bottom screen backlight ribbon cable
Should also check the top and bottom screen data cables, the speaker ribbon cable, and the camera ribbon cable
i disconnected the camera one i think
is it p9?
it think that one is damaged it has like a cut in the flex
so i disconnected it now, should i try the hw test?
The camera ribbon cable?
yeah+
Does the console turn on with it disconnected?
stays on the blue light
with no screen
when i insert the sd card with the hw test the blue light turns on then it snaps to black and turns off
im lost i really dont know what to do
And this is with the camera disconnected?
yes
i teared it down completely
i might need a full top lcd replacement
i think the owner broke the top lcd flex and managed to put it like normal
but when i checked it was cut in half
i just realized that
o well
i was gonna order some parts anyway
but can that cause the issue?
im unsure if i should order the parts or just
sell this
Is this the data cable or backlight cable?
think so
If you sell it you wouldn't get much from it since youd have to sell it for parts
ik but at least i get something back
but i mean
even without any parts
i tried turning on the motherboard
and the blue led was still there
not turning off
It wouldn't boot without parts
You cant test the motherboard without the top and bottom lcd backlight ribbon cables attached
but should it turn off? or stay in the blue Led?
It should turn off
And wifi module
Go for it then