#Original base 3DS **START BUTTON** NOT WORKING

1 messages · Page 1 of 1 (latest)

rotund zealot
#

Open the console and clean the button and it's contact

#

Send a picture

#

Can you send a picture of the two screws?

#

I want to see how stripped they are

#

They're only slightly stripped, should come out fine

#

What screwdriver are you using?

#

Phillips?

#

You need a #00 JIS

#

Phillips doesn't work

#

Get a #00 JIS screwdriver and do not attempt to remove the screws with anything else, you risk stripping them further which would make them difficult to remove even with a #00 JIS

#

#00 Phillips is pretty 50/50 on whether it will work or not, it depends on if the screw is stripped and how stripped it is. That's why you'll find people online saying it works fine and other people saying it doesn't.

#

However the correct bit is #00 JIS so, assuming the screw isn't too stripped, it will always work

rotund zealot
#

Go up to step 18 here then look at the picture at step 19

#

Those 3 black things on the motherboards edge at step 19 are the start, select and home buttons

#

Yes, it's the start button

topaz mist
#

As a temporary fix, you can use rehid and remap the start button to nothing

#

It will disable it