No power on POCO | Game Boy | Page 1

opal phoenixBOT Jan 24, 2024, 2:04 AM

#

Please remember to provide as much information as possible including all troubleshooting steps you have already taken. If this is a hardware issue, please provide clear in-focus images of the issue, PCB (circuit board), installation, and any soldering you have done. Help us help you, posts with insufficient information will be deleted

umbral prairie Jan 24, 2024, 2:05 AM

#

your ffc is off center and bridging a considerable number of pins

#

do you have a hot plate or hot air station?

#

it absolutely could if you have the wrong vias bridged

#

the right side here is bridging several pins

#

if you can, remove this ffc connector and try again

#

maybe clean the reg up a little wwith some flux but thats minor

#

that looks even worse at this angle

umbral prairie Jan 24, 2024, 2:32 AM

#

you know where this guy came from?

umbral prairie Jan 24, 2024, 3:08 AM

#

can you post the new install pics?

umbral prairie Jan 24, 2024, 3:26 AM

#

can you try to take steadier pic on the whole board? its doin a mr. krabs for me

#

ok at teh moment the only thing that visibly stands out are some cpu pins that look a little cold. after that point tho you will need to consult a schematic and do some continuity testing

#No power on POCO