#general
1 messages Β· Page 117 of 1
either check with their support or remove the plugin?
what are you using it for?
just to have cross server messaging?
then its not the issue lol
no idea lol
guess im not using global chat π
ill test it out! appriciate it.. have forreal been with this issue for hours
np
you mean the paid chat control, right?
there is a free version as well
yes, but it doesn't support bungee unfortunantly π
you tried multichat? ive used it about a year ago on a network
Is anyone here good with tiny bits of electronics
I am connecting up a wire with around 5 Volt but the wire is exposed and i do not have any electrical tape
Would closing it off with duct tape or masking tape do the job? Or should i get something else
electrical tape is used for electrical applictions because of how its made, it doesnt have holes in it. while you may get away with duct tape short term, its only 5 volts, so not like you are using it on mains. it should be ok. what are you using it for?
It's for a tiny powerbank, It's not that special
It's actually 3,7-4 volt. The volt meter i use is just a tad bit old and weird
I use 2 battery cells of 3,7v in parralel so it should be 3,7 volt
yea, just make sure everything is separated so you dont have shorts lol
I'll tape it off really good
I only have to tape around a 1,5cm cable so i'll just tape it up like 5cm
do that on both sides so i can have them nicely aligned
i keep shrink tubing, electrical tape, etc lol never without
and no short circuits of course
but i usually use insulated wire even for little projects
I wish we had Shrink tubing at our house
I use insulated wire but i had to cut off some ends of it
ah
and no, im not an electrical person, just a hobbyist and general "lets see if i can make this do a thingist"
π
Neither am i, Just wanted to make a power bank myself because that is generally cheaper
you have an overcharge protection board setup for it?
I salvaged the board from a fake JBL speaker from taiwan lol
lol
you will find out
if you will be awake and can test voltage, sure
if you will be sleeping, id wait until you can verify
Hmm how would it overcharge though
Can the battery itself have overcharge protection? Or is that the pcb
Because i can send the exact battery i purchased
some lithium have internal, but mostly is pcb
Well the speaker has overcharge protection i assume
it should - i mean, you should be ok, i just dont like to assume. Trust, but verify
lol
not when there is a chance for fire
If it is overcharged can it explode?
very explode
Im quite sure this battery came in overcharged actually
The seller said it was 3,7 volts but the volt meter gave around 4,1-4,3 volt
ok, so you are using like 18650?
Yup
they charge to 4.2, but stop giving at 3.7
so for a vape?
ive never bought powerbanks. but most of what is see dont use 18650, i guess its going to that more now since you can replace bad ones
This is the pcb i am using
Every powerbank tutorial video uses 18650 batteries though
i meant manufactured, not diy
Ohh yeah manufactured
but yea dumb me, 18650 for diy would be the only logical way lol
ive had two batteries at separate times decide to connect to loose change and short out.... not fun when they start venting and you burn your finger getting a hot battery out of your pocket
it vented for about 10 minutes lol
Ok found out my battery does not have a protection circuit
id wait to charge until you can verify the pcb works right
the overcharge protection
How would i notice it has overcharge protection
Sorry, I don't know if i am asking dumb things π
when the voltage hits 4.2 on the battery, if it stops charging
Ahh alright
Actually i will check that rn
Umm i think my voltmeter is broken
It showed like 4,3 at the start
and it slowly counted up to 4,7
Now it doesn't give an output.... XD
erm lol yea 4.7.... not too sure, i forget the actual threshold, but i think you would notice some issues if it were charged to 4.7
Ok i tried it with different batteries and the volt meter only outputs 0 as of now
On every charged battery so i assume this volt meter is broken
It's a voltmeter from 2005 so it has seen its days
rip
Anyone know why TE-ExplosiveEnchant doesn't work? It doesn't even add a config in the Enchants folder
Ok so i ordered a different pcb about a week ago and this speaker pcb is just a quick option
The new pcb has overcharge protection so i will just charge it at daytime only until the new pcb comes in
Hehe i made the powerbank
The only sad thing is that it charges my phone at like 3,7v because the batteries run on 3,7. And a normal charger should iirc output 5v
So it's more like a battery extender sorta
Actually is it bad if i charge my phone with too less volt?
Ik too much volt can damage the battery of your phone, But how does too less voltage work?
im sure there are some negatives, but less than too much
pssh ametures, using 18650's for powerbanks
12v 7AH lead acid batteries is where it' at now ;D
lol, when i was young, we had to use a 12v for lighting a few times
12v 7AH *9, you get more than 300% life out of your iPhone when you use those π
nice and juicy
heheheh
Love it when everything is broken at work and there's nothing to do...
should go home
we are trying to get a project out, but we have higher ups telling us to hurry up and wait. they want us to be done, but we are still waiting on them to give us work so we can complete it
@hybrid loom the authme plugin you were talking about, is there a sponge version of it?
Hey ZhengEn! Please don't tag staff members.
no idea
Hmm, i really need a sponge version of it :I
Anyone mind helping me with an SQL script quickly?
Oracle 9i/10g/11g/12c
select * from DB.Table
where TRANSACTION_DTM >= TO_DATE('2019-08-23 00:00:00','YYYY-MM-DD HH24:MI:SS')
AND TRANSACTION_DTM <= TO_DATE('2019-08-24 23:59:59','YYYY-MM-DD HH24:MI:SS')
AND (SECONDARY_REF = 'NUM1'
OR SECONDARY_REF = 'NUM2'
OR SECONDARY_REF = 'NUM3'
OR SECONDARY_REF = 'NUM4'
OR SECONDARY_REF = 'NUM5'
OR SECONDARY_REF = 'NUM6'
OR SECONDARY_REF = 'NUM7'
OR SECONDARY_REF = 'NUM8'
OR SECONDARY_REF = 'NUM9'
OR SECONDARY_REF = 'NUM10')
I know my syntax is off here, just curious if anyone knows the proper syntax for this?
@swift abyss Sorry for the ping, But i managed to find this on AliExpress https://nl.aliexpress.com/item/32291111012.html?spm=a2g0o.productlist.0.0.67ec18e9ncuPBT&s=p&algo_pvid=9f1426e9-bacb-48d6-a572-3af2a8851c64&algo_expid=9f1426e9-bacb-48d6-a572-3af2a8851c64-20&btsid=e59058e0-bf22-41cb-9f71-f5452ed7962b&ws_ab_test=searchweb0_0,searchweb201602_2,searchweb201603_53
Smarter Shopping, Better Living! Aliexpress.com
I will just connect my batteries in series so they output around 12v (Im gonna buy 3 then) and the cable will convert it to 5v, So it is the exact amount needed for the pcb
(Right now my android devices charge but my iphone does not. Because it runs on 3.7v of course :P)
Well they do charge, Just very very slow and Apple doesn't register that for some reason
nice
5v is the amount needed for a lightning cable right?
99% sure that peripherals are powered by 5v
yo
anyone know if I have multiverse and luckyperms, by default the prefix is [WORLD]
where to change that?
this was discussed earlier in #support-1 but you just need to go into the multiverse config and disable anything to do with prefixes
kk got it
mvm set hidden true If you run that in all your worlds it does the same thing if you don't want to dive into configs
I was wondering if anyone could give me some more information regarding the depend option in plugin.yml. When one adds a plugin to that list, will the current plugin only load when its enabled property is set to true? Is its onEnable guaranteed to be ran after the dependency's onEnable, and it won't be ran if the dependency's enable is false?
I kinda like the plugin OpenAudioMC
Anyone available to dm me a discord that has users that sell services (icons, plugins, etc..)
I had one awhile back and lost it.
MC-Market
@woeful willow https://helpch.at/discord
They have a offer-service channel where people... offer... services.... yeah......
That'll do.
And I'm avoiding mc-market with a 10 foot pole.
Nothing but horror stories ;)
Yeah and also kinda break EULA/ToS by allowing reselling MC accounts
A lot of servers break the EULA sadly.
yeah
most ive seen, even when they appear to be compliant on paper (webstore, etc)
They view it at the only way to make profits which is unfortunate.
Imo if you're going to host an mc server, do so with passion and not for profit.
I mean I cant enforce it lmao
It's just a sad thing
Like I can't count how many "ultimate SkyBlock-PvP-OP prison servers" I saw so far....
It's one of the most overused concepts and people still use it to death
Mc servers are overdone.
It's such a saturated market.
Hosting/Owning just too many.
And then seeing some of the people that ask for support here, makes me wonder about the ones that don't. π’
There's SaneEconomy that could be useful
not sure why essentialsx doesn't have /buy when they have /sell :(( I'll check that out
Just create an alias :/
an alias?
The type org.apache.http.client.ClientProtocolException cannot be resolved. It is indirectly referenced from required .class filesAnyone has any idea what the hell this means?
Do i not have the correct files or is the library i am using doing something weird
(Using Instagram4J if wondering)
@zealous locust so if you just want the full prefix, use this placeholder ${player vault_prefix}
i setup an abbreviated prefix so the playernames are shown more though
that placeholder will go under playerComponent:
if you want the group name and not the LP prefix, then let me see
${player vault_primary_group} would show the group
it will show how it is in LP, so lowercase. if you want to make it proper case, then you would make a custom placeholder like:
customPlaceholders:
custom_group:
!switch
parameters: 1
expression: ${%0 vault_primary_group}
replacements:
"default": "Default"
"vip": "VIP"
"mod": "Mod"
"admin": "Admin"
then youll need to use ${player custom_group} as your placeholder in the playerComponent: section
ive not tested that, just made it, so not sure if it works though
but it should
And what about player order?
It seems to be random
I set the player order to LuckPermsGroupInfo but it still is random
I see a BTLP configuration.... That plugin is sick
!players
playerSet: global
playerOrder: "LuckPermsGroupInfo,alphabetically"
did you try that?
yes, once you grasp the plugin, its amazing - just took me a min for some reason on the ordering of player/viewer. its not consistent lol
do you have LP installed on bungee with it synced to same db?
Still seems to be random.. I should be on top of the list because I have the owner group and highest meta/weight
I have LP installed on the spigot servers
With same db on both
i asked if you have it on bungeecord as well
the lpgroupinfo thing only works if you have LP on bungee to same db
you should
it lets LP handle bungee perms then as well
Alright I'll do that then. Will I have to import groups to bungee?
not if you use the same db that the spigot servers use
So I have this spam whenever a player joins the server.
https://pastebin.com/hmmXb73G
you edited the default-assignments: section I assume. seems that youve made an error
if:
has-true: group.default
take:
- group.default
give:
- group.vanilla
set-primary-group: vanilla```
That is what it is currently set to
you didnt follow the example fully, see this:
rule1:
if:
has-true: <group.default>
take:
- group.default
give:
- group.vanilla
set-primary-group: vanilla
so it just needs <> ?
try it and see
π
I did all that and the order is still not working
you do have group and meta weights set, correct?
Yes
Got it working
Changed it to vaultGroupInfo
Oh wait
Nvm.. I'm gonna double check the weights
ok
see this as well, https://github.com/CodeCrafter47/BungeeTabListPlus/issues/263
seems it wants an actual meta weight, that is different than group and prefix weight meta.weight.10 etc
so you are making a meta attribute that just has a weight
@swift abyss so turns out Essentials is looking for PermissionsEx still
And not luckperms
you have pex installed?
- never use plugman or other plugin management, just stop and start your server properly lol, those type plugins aren really good.
Restarting the server to see if it fixes
- LP cant work with other perms plugins
or /lp group <group> meta set weight 10
editor will be easier to set all at same time
id make that weight the same as your group weight though
so if mod is 1400, then make that new extra weight attribute 1400 as well
Okay so just had to restart the server and its working with EssentialsXChat now.
how do i delete the first prefix
you need a tablist plugin for that
because thats a nametag plugin
tab reborn (linked in here many times) works, but requires some config
what tab plugin supports luckperms?
the one that was suggested to you
@dim ledge If it supports vault, it will work with luckperms
@drowsy quest Since you created this post https://mcserverrant.weebly.com/tips-and-tricks/hide-your-backend-servers
Could you perhaps explain the first option a bit more clearly?
I want to revive my old network and want to keep it as secure as possible...
@hybrid loom what part are you not understanding?
The trick is to make the backend servers not listen on the public IP but rather localhost/127.0.0.1 or the private network IP.
Like... in the server.properties?
Where else?
π€·
There's exactly one spot where you can configure on what address a MC server listens to
That being the server.properties
I don't get why this won't work as start.sh
when using ./start.sh
had to convert it to unix (I guess) using dos2unix
Yup
Linux shell doesn't like windoes line endings
And for future reference "won't work" is the worst error description possible
just having the start.sh causes the server to run in the bg but tmux doesn't update....
Causing a "Port is already in use" error
Never used tmux. Only screen
probably will too
since Spigot explains how with it...
Do you perhaps know how to cd and then run the jar with screen?
The spigot example only has screen -d -m -S "session_name" java [personal params] -jar spigot.jar
Or I think I see it wrong...
And adding backwards compatibility hardly ever is a bad thing. Especially for popular things and when doing so is easy.
One sec, I got this
i used to play on a commodore 64
does anyone know how to cancel the console announcing everything i'm doing?
Gamerule logAdminCommands?
i mean.. id want to know if someone is made OP....
there is a setting spigot.yml to not show command block output though
hello everyone
does anyone here know how to unstack mobs after they have been stacked on a server using stackmobs
i stacked some villagers by mistake and i need to unstack
but i dont know how
you can have it stack by profession
thing is i dont want villagers to stack at all
you can disable them form stacking
my villagers of same proffession have stacked and i want to undo
there are entity/mob blacklists i beilve
after i disabled villager stacking in config i hop back on the server and the stack is still stacked
for some reason the command u meantion doesnt exist in mobstack
youll probs have to punch or kill one to unstack the rest
what command did i mention?
/mob blacklist
there are entity OR mob blacklists i believe - the slash means the two terms are related
i see
another weird thing is that after i deleted the mobstack plug in completely in an effort to undo
they still are stacked
no, they are one mob with a nametag
so the other 5 villagers just despawned
if you add the plugin back and the folder still exists, then it may have saved the data
ok ill try that
Uperms or Luckperms
I have uperms it garbage compared to lp web editor
does anyone know why i cant breed animals in a stack using stackmobs?
yeah i switched that to true and it still didnt work
its not working when im making kits
@proven fulcrum what isnt working?
what plugin are you using for kits?
if on essentialsX, then you need at least 2 permissions (preferably 3) https://essinfo.xeya.me/index.php?page=permissions to the group. one to use the /kit command, one perm for the actual kit, then there is an optional perm to see the kits.
okat so i am having some trouble with hosting this server.
ive seen plenty of tutorials and followed them to a T
but everytime my friend tries to join he gets this message
"io.netty.channel.AbstractChannel$AnnotatedConnectException: Connetion times out: no further information:"
anyone that can help me figure out whats wrong?
Maybe a plugin....
check console?
plese explan to me how to do that
never made a server before and im having all these issues
....you don't even know what a console is?
i know what it is
i jsut dont know what to check or how to check that specific thing
the console to the server is open and i can connect jsut fine
i tried that people are just saying stuff about firewall but i already tried all those things
I can't really help any further
What speed is your internet running at
You may not have a high enough upload speed for players to connect and load your servers terrain fast enough before timing out
'speedtest.net' is not recognized as an internal or external command,
operable program or batch file.
Yeah, that's because its a website
@zinc atlas ok, so in your bungeecord config.yml - there is a setting called force default server - if you make that false, then still have the lobby as your priority server, they will join very first time to lobby, but will join back where they left off since it will no longer force them to the default lobby server. but... any protection plugins you have on lobby will now also need to be installed to the other servers since they will bypass lobby
ok
that doesnt matter for what you are wanting
just the change of force default server
ahhh ok gotcha
that will allow players to join back on the server they left from
instead of always going to lobby
i dont have a config.yml in my main server drive, i have a paper.yml and theres a spigot.yml and a bukkit.yml
which one would it be?
newest*
so you want players to go to their last position in a world. you using multiverse im guessing?
essentialsx?
yep
do you have the setting for spawn on join set?
its near the very bottom of the config
in essentials?
yea
ill check 1 sec
ok
spawn on join is set to false
ok, then it must be MV handling it
What priority should we use for handling spawning on joining the server?
See respawn-listener-priority for possible values.
Note: changing this may impact or break spawn-on-join functionality.
spawn-join-listener-priority: high
did i change this to high or is high the default?
well, you have it false, so the priority wont matter
ahh ok
im trying to fully grasp what you want. basically, you always want them to join in hub world, but once they go to the other world for the game mode they want, you want them to go to their last location there?
i help on a 1.14.4 server and that happens
yea you got it man π
well, that server recently went to bungee, but thats how it was setup before on one server with worlds
let me look at mv config to see
give me a min
yea i have the server pretty much complete with permissions complete, factions added, votecrates, spawnershop etc all done its just i cant wrap my head around this very basic problem to fix lol
i dont know whats doing it
every time they go to factions or survival it brings them back to the spawn of that world they're in
can you send your mv config?
yea
multiverse core i assume? cuz i also got portals
core
i can also send you the worlds.yml config if thats helpful?
it is made for multiverse
im still looking though
think i found it
in the world file, try adding:
use_optionals:
- last_location
in multiverse worlds.yml?
yea
better to stop server, make the change for each world you want it in, then save and start again
allright, will i add that to the bottom yea?
for each world, proper spacing is:
use_optionals:
- last_location
im still searching, but give that a shot
added it, starting server back up to test it now
also, yea, sorry - change the essentials respawn listener to low
that you can just do live and use /essentials reload
np
(maybe) lol
respawn-listener-priority: high or
spawn-join-listener-priority: high
spawn join yea?
to low or lowest? because in the config it says # Set this to lowest, if you want Multiverse to handle the respawning.
eh, if thats what it says, go with lowest. im just going off info from others and they used low. but lowest wont hurt anything
np
ill test it now
i added the use_optionals:
- last_location to the ver ybottom of each world is that ok?
or does it have to be at a certain part of each worlds config
im so sorry. give me one seond (i never use mv personally, im thinking we forgot something)
ok, so that setting is actually part of this add-on
so you can remove from worlds.yml
there will be an inventories config
sorry again
for sure
allright so i add this use_optionals:
- last_location on multiverse inventories config?
shares:
# When set to true, optional shares WILL be utilized in cases where a group does not cover their uses for a world.
# An example of this in action would be an ungrouped world using last_location. When this is true, players will return to their last location in that world.
# When set to false, optional shares WILL NOt be utilized in these cases, effectively disabling it for ungrouped worlds.
optionals_for_ungrouped_worlds: true
# You must specify optional shares you wish to use here or they will be ignored.
# The only built in optional share is "economy"
use_optionals:
- last_location
will i remove the brackets that are there yea?
you
....
my friend
....
are a blessing in disguise π
i would legit bear hug you right now my friend π
this has been an issue on my server since i started developing it over a month ago now and i havent been able to fix it
ive had mulitple people try and help but we could resolve the issue
i love you bro no homo π
im almost jumping for joy rn π
@swift abyss thank you so much man! You put in a lot of time helping me with this i really do appreciate it a lot man
glad to help lol
i started in the end thinking that this wouldnt be possible to fix since i was using a normal paper spigot server and was thinking i was going to have to use bungee since i know bungee is for multiple servers but i didnt wana go through the headache of converting my whole server and potential extra costs, im guessing bungee costs a lot more
so thank you my man π
you are welcome
okay
so here is an example that works:
so you make a members group cantleave (or whatever lol) for that region, then set flag entry deny - then give the group in LP the permission group.cantleave this will make it so that only people with that LP perm can enter the region
also, do make sure you dont have op or worldguard wildcard or bypass perms
that setup i did for a prisons mine and until the player had that perm, then they couldnt enter
so you can adjust that for exit, etc
but yea, worldguard looks for a perm group.<group> and the group name is what you called the group in the region
But shouldn't it just keep me out if I'm not a member of a region, don't have any group.* permission and the region is set to deny entry to nonmembers?
that setup would keep you out of the region if you dont have the perm
Like, I'm trying to find something that works so I get some feedback
Yeah, but it doesn't keep me out, that's the baffling part
and you arent op?
And i can't for the life of me imagine where I would have overlooked something crucial
nope, not op
even tried to remove myself from all lp groups
are you sure you set the region limits correctly? //expand vert or verified the region is large enough
what mc version?
1.14.4
that may be the issue
you see any errors in console?
Nope, no errors, again, it's unsettling
i know w/e w/g still has some issues
I'd fucking love an error at this point, tbh π
yea
if you setup just how i showed, it would work. let me send you exactly the setup from wg
gold:
min: {x: -1555, y: 57, z: 179}
max: {x: -1538, y: 81, z: 200}
members:
groups: [goldmine]
flags: {entry: deny, block-break: deny, entry-deny-message: 'Β§cΒ§lHey!Β§r You
need Β§6Β§lGoldΒ§r rank to enter. For information, use Β§eΒ§l/info ranks',
block-place: deny}
owners: {}
type: cuboid
priority: 10
Which MC version are you running?
hmm
The shape of the region shouldn't be the issue, right?
spawn_island:
members:
groups: [lobster_friends]
flags: {enderpearl: deny, wither-damage: deny, entry: allow, exit-override: false,
greeting: Welcome to spawn island!, entry-group: MEMBERS}
owners: {}
type: poly2d
priority: 0
max-y: 112
min-y: 2
points:
- {x: -156, z: 51}
....
nope, but i did have an issue a while back where i used poly and w/e didnt like it - ive never had an issue with poly on wg
Like, I get the greeting alright, so I don't think it's a poly issue
tried it both ways, no difference
then unless you have in LP the perm group.lobster_friends you cant enter
is there another region overlapping?
stand in there and do /rg info
just to be sure
says undefined for that perm
in verbose?
there's a child region within, but it doesn't extend as far as the parent
verbose?
says undefined for that perm
where?
if undefined, then you shouldnt be able to get in there
When I do
/lp user <myuser> permission check group.lobster_friends
it says
<myuser> has permission group.lobster_friends set to undefined in context global
I know... It shouldn't let me in, but it does and I just want to scream π
very odd
Right?
Looks like a mod
there is a plugin
sounds handy
its paid
I uncovered a lot of ways in which it might fail, like move events in worldguard not being set, ExtraContext missing, etc... none of it is off, though
ohhh
no not the scoreboard
im looking for the plugin for those donation boards
where you can put text on the boards
free option that may work - https://dev.bukkit.org/projects/imageonmap
more likely what is being used:
https://www.spigotmc.org/resources/bannerboard.20435/
sorry, had to go way back in my dms and crap lol
np man thank you very much
the first one, ive used a few times to put a pic in mc, if you make a good clean image, it may work
I guess teh wepif.yml file of the worldedit plugin isn't to blame either? It has a section called "permissions", but some of these permissions don't even exist
cat, my only thought is some issue in wg - have you tried diff versions?
It's the only compatible with 1.14.4 π¦
btw do you know how to stop factions being able to claim worldgaurded areas by chance?
is that your job or maybe even a side hustle? do you develop mc servers for people?
You mean compiling it myself?
i help a few people from time to time - not a job, just hobby lol
oh i fixed it
easiest is to make a world guard flag blocked-cmds /f claim
i found a setting called worldgaurdchecking and it was set to false on each of the configs
ahhh i see
ah, that also works
yea, never hurts to double up
factions plugin with how it does the mstore in main directory and all the folders is weird lol
ah
rip lol
i asked for help yesterday morning and its now 2am the next nighjt
and im still waiting on a response lol
thats originally where i pulled the info from to do the region
maybe you can see something in there to help
Yeah, I've seen the same one... multiple times... and few people ever notice that they used g- instead of -g XD
And I've been doing the exact same thing over and over
just without adding myself to the group
because I want to make sure that I'm actually kept out
the definition of insanity π
That's a nonsense definition π
hope they sort it out soon
Yeah, same :/
check github and make sure there isnt an issue for it, if not, add one
Might actually try to compile the damn thing
Yeah, guess so. sigh
I don't need groupmanager, though, or do I?
it gets mentioned so often
no, i guess they were in love with that plugin maybe
i used lp for the setup i showed. ive used it on 1.12.2 and 1.13.2 servers - actually. let me test the regino crap on a 1.14.4 and see if it works
maybe we can know if its your server
give me some time
@glacial beacon before i fully setup this region, did you by chance remove the entry-group: MEMBERS and try?
i didnt use that flag
yeah, I tried them all :/
I just set an entry-deny-msg, thinking maybe it's just the enforcement that's fupped, but nope
@glacial beacon ok - so delete the region, make a new selection and then do these steps exactly:
/rg define spawn-island
/rg flag spawn-island entry deny
/rg flag spawn-island greeting Welcome to spawn island!
/rg flag spawn-island entry-deny-message Insert message here so default WG message wont show.
/rg addmember spawn-island g:lobster_friends
/rg flag spawn-island entry -g nonmembers
the entry deny is optional, but i included anyway
I think I got it
I went through all the groups in the chain and one had worldguard.* as a permission... which I guess should have sprung out sooner.
Yeah, it does work for me now, too. I figured it would be something embarrassing like that.
i did ask about wildcards π heheh, but glad you got it
and now from that you have a clear set of instructions to recreate the region stuff if you need it again
Yeah, but it wasn't a wildcard in any of the groups I suspected. And I kinda thought explicitly defining one of them as false would fix it
Thank you! Sorry for taking up your time.
i always set myself to default when i test or use one of my alts because i keep 1 alt as default always
it wasnt a waste, a goal was accomplished lol
I guess something else was fucked, too, because I was default for a while and it didn't work then either
but that might have been before ExtraContext
I've been on this for hours now and I'm frankly having trouble spelling my own name at this point
π
extra contexts is nice though
just make sure to enable the context you want from its config
Yeah, it is and it's working π
lol
entering all permissions by hand is so tedious, but at least now it's working
lol
thats why i dont do mass manual entry, i only do minor manual when testing out a plugin
Yeah. but even that wouldn't have been much quicker. But it's a really cool feature
really weird, though, giving the admins group the bypass perm (it reports true when you check it) does not let me into the region either, now
so the wildcard does more than the actual bypass perm
Ah, because that has subpermissions, too
It's not meant to be used with world names with spaces, though
Which, granted, wasn't the best idea I ever had, but it's not my fault MC doesn't distinguish between the id and the display name of a server
by default with inheritance, wouldnt the admin group inherit the group.lobster_friends perm?
worldguard.region.bypass.* that perm?
I haven't had that group set yet, was still testing and it got weird π
was still testing and it got weird
bwhahahahahha
Huh... entering a child region within the parent region counts as leaving?
you can change the priority
either set parent higher or child lower maybe?
then it should resovle the issue
i cant set the prefix can someone help?
@dim ledge vault and a chat plugin are needed
i'm using ess chat
You need vault too
hi ich wollte fragen ob mir jemamd helfen kann kurz die rΓ€nge zu vergeben ?
ich verstehee null
multiverse
^
so what do i do now
Check config and manage it?
As soon as I join, it does not load my prefix, but as soon as I speak, it then loads the prefix in the tablist, how can it make it automatically update?
That would be to do with your tab plugin check in the config to see if there is anything
hmmm
I think this could even be a bug with Spigot and/or Vault itself
But it sure isn't one with LP
Hello friends! I installed Chat Manager on the server, but I just canβt get the prefix in the chat. I tried it already through the Placeholder, but nothing π¦
Did you ask the dev of Chat Manager for help?
Yes, I wrote there. It turns out that unfortunately itβs impossible to implement a tag, but you can set the prefix directly in the chat plugin itself, itβs pretty convenient
Any idea why the plugin is setting the displayname black?
<Rank>SkidsRUs
It should be <Rank> SkidsRUs
And it should have a color
Does your chat formatting plugin have a space?
The colour code closest to the name will define the name colour
Does anyone here know how to send offline messages in Spigot? i.e if the player is offline, the message will appear when they re-join? I'm considering making implementing it myself storing the messages in a table and querying it in the on-join event but I'd rather not if there already exists an API or something for it.
I know essentials has mail - is this what you're referring to?
Yes
That's not exactly what I'm looking for, since I'd like it to show automatically when they log in. Also, servers using my plugin may not be using Essentials.
anyone know any good chat plugins?
essentialsxchat (if already using essentialsX), venture chat, hero chat, deluxe chat, etc
if you just want simple, try vaultchatformatter
Hey Since no one else is telling me anything about this. Does anyone know anything about number flipping
block - what plugin for tab?
yes
and you have %prefix% in there?
yes just the name is not correct
what shows for the user when you do /lp user <user> info?
do you have group and meta weights setup?
what prefix is showing in tab?
Builder
can you send your lp editor here?
I will not soryr
lol ok?
Do you know why its like this
cant help you if you wont send needed info
the weights and meta data are the same
you could try tab reborn (linked here a lot) and see if that works for you.
hey
@cerulean shell Ok, try %username%
The only thing that is wrong is the prefix
The prefix is wrong?
yes
So your the owner?
I am the manager but it works on there but the owner rank is messed up
How is it messed up? What is wrong with it, is the prefix it?
The prefix needs to be owner not builder
Owner is 1 and member is 18
Member, elemental, catalyst, atomic, nuclear, youtube, famous, builder, helper, moderator, srmod, admin, sradmin, developer, manager, operator, owner
yes
Ok
Guys tell me which plugin to implement the display of prefixes in the tab?
tablist, tab reborn - basically anything called tab or tablist that works on your mc version.
They work with LuckPerms? 
why not?
TAB reborn is the best out there in my opinion, It can automaticly read luckperms groups
^ for single server, its the most used
@swift abyss @ornate heron Thanks π
is there any way to do a shortcut command instead of doing the whole thing
like
for example
/lp {name} set/add/remove {group}
That shortcut simply would be useless because you can do more than just give someone a group with lp name you can set temp groups/perms, metas, perms and get user info @dim ledge
any good VPN's?
anyone know a good ranking up plugin that works well with lp?
!help
@bitter sleet Ranking up with time played? In game cash? Irl money?
ingame cash
i got ezranks pro but not sure how to work it and their support sucks
but i might of figured it on my own
@torn frigate AutoRank or create a gui with chestcommands for ranking with ingame money
@remote cobalt You could ask on the M.O.S.S. Discord for support with EssentialsX and EssentialsXChat
okay anyone know about ezrankspro setup?
cant get the stupid ranks to rankup
XD
and their support aint helping
What do i have to change in paper.yml for bungee to work?
Guys, tell me how I can realize the opportunity for donators: So that they can change the prefix for example from [Premium] to [Player], but not to any other? Is it possible out of the box or implemented by third-party plugins? 
Just have a group for donors that has the appropritate prefix weight
And how can a player switch between prefixes? 
Does anyone have experience with the DeathChest plugin ?
How would I import something from a map i downloaded into my server map. Trying to get a spawn area i like
Would you mind explaining that a bit more in pms :3
Sure
10:29 PM] SlurpMyDongle: also has anyone worked with ultimatechat? i want to make one global chat channel the default, instead of per world channels
[10:29 PM] SlurpMyDongle: their wiki doesn't help much here either
I have not.
I'm using Modern-LWC-2.1.5. I have a region and the region has an owner, let's call him Dog, dog has a friend (cat) who made his house into Dog's region. Cat has a nice house with chests etc in it, he is a member in dog's region, but can't open the chests he has made, even though he has locked them etc.. When I made cat owner in dog's region, cat could access his chests. How could I make him access his chests as a member?
Paper 1.14.4
Guys, there was such a problem, if the prefix is long, for example - [Administrator], then it does not fit over the playerβs head and in the Scorboard with luckperms placeholder. How to be? What could be the problem?
its like a 16 character limit
dependent on the plugin maybe.
look for one that has the prefix, name and suffix separate fields so that you get to have 16 characters for each
@swift abyss I do not really understand. There are no character limit settings in these plugins. Or?
This problem is in two plugins: Tab Reborn and Scorboard revision. However, in Tab Reborn in the tab itself, everything is fine. And yet, if I set the colors through "&" for example, then they also occupy a place in the prefix (it turns out), if there are a lot of them, the prefix generally collapses
tab doesnt have the same character limit as the scoreboard plugin
Well, but how can I remove this limit if there is nothing about 16 characters in the configs?
you may be able to edit the code in the jar not sure
Is it possible to implement only by editing the code?
have you looked at nametag edit? it is a plugin for nametags
i uses a prefix and suffix field i think and leaves the playername as is
and yea, if there isnt a config setting to allow more characters, then it could only be changed in code
Okay thanks. But I really donβt understand why in the plugin you can replace the nickname with whole messages, but the prefix next to the nickname is limited by characters π
i getcha, also, some plugins take into account the color codes as characters for the limit
Prefix and suffix supports variables %player (player name) and %world (world name)
are you using essentialsX?
I did but i cant make the chatX work with 1.14.4 it wont make a Folder with a config file etc
want me to try again?
just add the essentialsXChat jar to the plugins folder
the config is in the essentials config.yml
it doesnt make its own
Oh
fack
its bc all the other ones did
i thought]
xD
okay restarting the server
where do i put those?
...
you look at your config and make it match
oh alright
π
because they are not all by each other
the rest should mostly be in one section
so do i remove the # so that it isnt read only for that part
its the chat formatting section
I then found out that if you put spaces in the config, the prefix is displayed (albeit crookedly). It turns out it's not about character limits yet? This situation is in two plugins 
bc the add-prefix-suffix: has #
correct, if there isnt a # in the link i sent, then there shouldnt be one in your config
oaky
thats weird Dui lol
I have a slight suspicion that plugins are in conflict UPD: Nope, thatβs not the problem.
Fantastic! It works! Thanks lots. Do you know how i remove the [] at the start?
thats in your towny, multiverse, factions, etc plugin
youll need to disable from there
okay so multiverse then i dont have the rest XD
My carelessness will destroy me :D. With Scorboard, the problem is also solved, most likely there is a bug, just donβt have to abuse the colored tags in the prefix 
π
I just made my first plugin for Sponge! It just prints an message in the console on startup, but that's something!
I'm hyped like a little child!
nice
So you compiled a jar using the minecraft dev plugin π
Anyone have issues with LuckPerms slightly breaking GriefPreention slightly
as in?
i have 1.12.2, 1.13.2 and 1.14.4 servers running LP and GP and no issues.
how can there be a slight break? its either working or not lol
So you compiled a jar using the minecraft dev plugin
Yes, exactly. I have to say in all of my previous (bad) Bukkit plugins I never needed it. But Sponge looks so interesting. And if you try a new server platform, why not a new plugin for IJ?
Oh and one of the reasons to make my next server idea on Sponge is that I can use Nucleus. I love Nucleus' permissions tree. And the doc page about wildcards is great, too.
lol
1.13.2 And players can break blocks in claims when they are untrusted
Do you use wildcards by any chance?
sure you are using the correct version of gp?
ive never known that to happen
and yea, if you are giving wildcards lol
how can i add other plugin's prefix
Not for GP, but for other plugins yes
is there anyway to find out whats making my server skip ticks?
this is my latest log
I don't know if that would help
You're running sponge, so it's a forge server
Forge servers are never going to be smooth, and will always skip ticks
@rain edge
but it wasnt doing this till now
If its a modpack, check for chunkloaders
I really like that OpenAudioMC plugin
Anyone know of a plugin (search spigot for a while now) where there like a gui interface where players can chose which prefix (out of the ones per permission) they have access too?
deluxe tags, tagsgui(doesnt work with LP yet, im still waiting on update) and probs a few others
ok, so there is support so users can select between which of the tags they can access ?
saw it now! sweet, thanks β€
np
anyone know what to do about players getting kicked for flying (they aren't flying)
@cerulean ether i think its in server.properties - there is a line for allow-flight
just set it to true and that check wont be performed.
will this stop checks for cheating
if you have anti cheat, no - it will work as it does now
that setting just stops the vanilla check for flying - meaning if a player is off the ground for too long
at the moment i don't have any anti cheat what would you recommend

matrix, spartan, aac
thankyou
Hello, I search a plugin to autocompletion when write "/" + [TAB]
Anyone have an idea of plugin ?
"command blocker"
search that
or you can just diable tab complete in server files
i think its bukkit.yml or maybe server.properties. cant rememner
All commands will no longer auto-complete then if I define into bukkit.yml or server.properties ? I would only like to remove autocompletion when the person does not have permission.
look at a command blocker plugin then. i have tab complete to 0 or -1 whichever is off, and also use a command blocker plugin, the plugin allows tab complete even though the setting is off.
i just allow players to tab things they need. no one wants that spam from /<tab> lol
@past parcel what do you want to troubleshoot that needs a GUI?
Neither do I
uhh
And I've been running linux servers for 10 years now
Like idk, I sorta want something like team viewer,
SSH
Seriuously
I tried SSH, and couldn't get it to work.
That's another issue
i'm sure I was doing something wrong.
Most likely
yah, I was reading about that, but it says it's for advanced linux users NOT ME
I would struggle setting it up....
Accept the challenge
Not that hard
Do it anyway
And all part of learning it
do u have experience with it brainstone?
Be aware that there's also a great support Discord
Yes
I installed it on 5 servers
so if I get stuck, I can call up my homie π lol.
2 of those setups even were a multi (root) server setup
meaning bungee ^ ?
so what would I download? Ubuntu server LTS?
@ BrainStone https://remotemysql.com/#about ?? free mysql host?
Installing MySQL on linux is a single command
Quite frankly my personal recommendation is Debian @past parcel
Or Ubuntu server LTS. But that's actually for more advanced users.
It comes with a lot of stuff you don't need or want
Debian is a clean slate
And the commands on both systems are virtual identical
ππΌ
Btw, when you need to decide between nginx or apache, use apache
While it is less performant than nginx, it is significantly easier to use and configure
And many things intergrate automatically with it
nginx is for the advanced people
hi
Hello everyone, could someone tell me why the most important rank in this case "Owner" is below the lower "users" ranks in the player list
You should probably include more info. Like what plugin are you using for the tab display? Have you set weights on your groups?
The plugins I occupy are:
AnimatedNames
DeluxeChat
LuckPerms
Have you set weights on your groups?
it would have been easier to just show the output of /lp listgroups
anyway, i guess it is up to whatever plugin is formatting the tab, which i don't know anything about, so someone else will have to help you figure it out
it is up to whatever plugin is formatting the tab
Does anyone know a plugin or command which clears there inventory when they join a new world
Does anyone know why my nick doesn't show in the actual chat?
Is it showing up when you do something like /gamemode 1?
Fixed it
probs the displayname setting π
Hey, what are the ID's for mob heads? Quick internet search gave me something SkullOwner:...... but I don't really understand how to use it as an ID, to add them into my shop.
GUIShop
Skulls often have a skull owner for the texture
Idk. Ask the dev
I might set up a dual boot on the server pc imma use. Since the P.C. has a gpu in it and is decent at gaming. So windows for gaming, Linux for server.
Why? so you're gonna shutdown your server just to play games?
Unless this it's used for a test environment, that seems like a bad idea; as most servers are to be online as much as possible
Even as a test environment it doesn't make too much sense.
In testing you could run your servers on windows (as far as MC is concerned)
Would anyone be willing to look at a crash log for me and tell me why my game is crashing?
Would be useful if you posted the log...
why everytime i try to set essentials chat per group, it always error?
@rare merlin typo? Wrong configuration?
Please try to explain your issue in more detail
@dim ledge either your chat plugin or LuckPerms prefix stacking when you use it.
@hybrid loom fixed that already thank you
Hey Quantom! Please don't tag staff members.
can you take a look at what i sent in #support-1 ?
@hybrid loom nvm, after i remove the displayname the config work perfectly
Hey Responsablyat! Please don't tag staff members.
The dev of BungeeTablistPlus makes a spigot version now. Nice.
https://github.com/CodeCrafter47/AdvancedTabOverlay
oooooo
What is this about now?
https://github.com/features/security
Lol.... I currently check wix.com and their pricing... They sereously limit the bandwidth you can use per month
That is stupid
Rent a VM from OVH or Hetzner
Wix lmao
i have a question so i am wanting to make a global rank for my bungeecord server how would i set that up with tebex?
aka buycraft
Leave the contexts as global when setting it
Groups are always global, so just apply the group to the player and they should have it across all servers unless youve told a server not to listen to the global contexts
Man. I love that Spigot plugin of CodeCrafter
Imma just leave this here: β€
This is why we can't have nice things!
._.
Is using WorldBorder plugin worth it?
I would say so
Quick question, do blazes still drop rods when they die by the water and not by the player? the blazes in my server don't seem to drop when they die by water..
quick question is this the right way to have this
default: 1
Coal: 3
# essentials.sethome.multiple.coal
Iron: 5
# essentials.sethome.multiple.iron
Gold: 7
# essentials.sethome.multiple.Gold
Diamond: 10
# essentials.sethome.multiple.Diamond
Emerald: 15
# essentials.sethome.multiple.Emerald
unlimited: 1000
# essentials.sethome.multiple.unlimited```
not too sure