support-1

[foggy quartz]

Before I uploaded LP

It was fine

When I did upload it, it broke

[toxic wagon]

The thing is, you have no permission

so give yourself the permissions

[foggy quartz]

I've given permission in /lp editor to the two nodes

[toxic wagon]

and it will work

[foggy quartz]

i've given the 2 perm nodes

to default

[toxic wagon]

did you save the editor and run the command it give syou

[foggy quartz]

yed

[toxic wagon]

What storage type are you using @foggy quartz

[foggy quartz]

mysql

[hasty night]

Say for example i have ranks A,B,C,D and i want to skip from rank A to D in a single command, is that possible?
I looked at the page you linked Imortalshard and it took me to parent commands

[toxic wagon]

Just use the parent commands to give the user the D rank

[foggy quartz]

i even removed and added the permission nodes

http://i.emil.ink/u/23.35.25-26.01.19.png

[toxic wagon]

Try using /lpb to set the permissions for bungeecord. Shouldn't make a difference since you're using mysql but worth a try

[foggy quartz]

kk

[echo pivot]

What's bungeecord

[hasty night]

If im reading it right i would use
/lp user Notch parent set D
that would do the trick?

assuming i have inheritences right nothing would be lost?

[feral ruin]

Is there a permission that allows you to see logs?

like when something gets updates

[toxic wagon]

@hasty night That's correct, parent set would remove all current groups any only give the player the rank D

[feral ruin]

it like notifies you with a log thing

[toxic wagon]

but with inheritances setup, they will still get everything a b & c have @hasty night

@feral ruin https://github.com/lucko/LuckPerms/wiki/Command-Usage:-Log

[hasty night]

ty 😄 thats exactly what i was looking for

[foggy quartz]

hello

I need help

with luckperms

I keep getting this error https://pastebin.com/G2aMaQCL

[lapis ibex]

!errors

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Storage-system-errors

[lapis ibex]

That page should tell you how to fix it @foggy quartz

[foggy quartz]

ok

[foggy quartz]

Helpp

its the config I enabled mysql triple checked that it was right and it didnt work.

it says that its H2

when i enabled mysql

[hasty tree]

when you say "i enabled mysql" what do you mean by that

[foggy quartz]

I went to the storage provide thing and went strorage provider: MySql

im using lastest version btw

[hasty tree]

it should be storage-method: mysql

[foggy quartz]

yeah thats what i put

[hasty tree]

and /lp info is saying H2?

[foggy quartz]

yeah

[toxic wagon]

Did you restart the server

[foggy quartz]

yeah

many times

[lapis ibex]

Mind to post the config?
Remove passwords and public IPs though

[foggy quartz]

ok

just imagine adress pass and username

[hasty tree]

hastebin or similar service would be better, we don't really like having to download files

[foggy quartz]

ok

[hasty tree]

so you're on the lobby server when you do /lp info ?

also your messaging service is set to none which probably isn't ideal

[foggy quartz]

yeah

ok i can fix that too

here is pastebin tho

https://pastebin.com/pvEPHvAh

[hasty tree]

wait nvm it defaults to sql

and are there errors in the console?

[foggy quartz]

no erorrs

just registers it as h2

[hasty tree]

can you share the console logs from the last restart

[foggy quartz]

yeah

ill dm the paste link tho

[toxic wagon]

Just send it here.

[foggy quartz]

ok

there u go

using gg servers btw if that helps

[toxic wagon]

Use a service like hastebin. Or similar for it.

[foggy quartz]

oh yeah sorry

[toxic wagon]

An it should just be latest.log

[foggy quartz]

https://pastebin.com/QmnpwVbh

oh

latest

welp

gotta do that agin

[toxic wagon]

You have a syntax error with the config file.

[foggy quartz]

where?

[toxic wagon]

Near the username.

It says in the error.

[hasty tree]

you've used a tab

[foggy quartz]

omg

im dumb lol

i hate the tab sometimes

[toxic wagon]

Never use tabs in yaml files

[foggy quartz]

i usually dont

lol

thank 4 the help tho

[hasty tree]

some editors will auto convert, like VS Code

[toxic wagon]

I love vs code. It's all I use now.

[hasty tree]

same haha

[foggy quartz]

i just use msvs 2017

[hasty tree]

so yeah, the config file is corrupt, so LP defaults to H2 since it doesn't know what to do

[foggy quartz]

wow

such smart plugin

[hasty tree]

not the plugins fault :P

[frozen harness]

Is there a way to allow a group to only set one parent? e.g. Allow group MOD to only set a user's parent to member.

[lapis ibex]

@frozen harness yes. Check Argument based Permissions

It's a config setting

And has a wiki page iirc

[frozen harness]

Thanks, I will check.

[nocturne owl]

Players can run commands for a permission in blocked worlds. Does anyone have the same issue?

[toxic wagon]

Did you set the world context for the permission and set the permission to false for the world you don't want it in .

[nocturne owl]

I just ran the command /lp group default permission set [permission] true global [world]. Do I have to change the value to false for blocked worlds?

[hasty tree]

some plugins apply things by default. you might need to set it false globally and set it true in that world only (like you already have)

[bitter coral]

What is on the wiki (https://github.com/lucko/LuckPerms/wiki/Network-Installation#installing-luckperms-across-your-network) meant with "main configuration file"? The config on the proxy or the lobby server or even something else?

[hasty tree]

well i'd say it applies to every luckperms config

on each server

it probably could be worded better

[toxic wagon]

Yeah, it's the main config.yml for all the servers.

[bitter coral]

Ok, so I can just copy and paste the config for every server, hope that all will work.

[toxic wagon]

Yes, but not something like spigot to bungee

If it's spigot server to spigot server it's fine.

Just change the server name option at the top of each config.

[hasty tree]

no you should not copy/paste

[twin juniper]

Do you guys know if Essentials automatically recognizes LuckPerms groups or do I need to install some kind of hook?

[toxic wagon]

@twin juniper If you use essentialsX it should work.

[bitter coral]

Use EssentialsX, EssentialsXChat and Vault

[toxic wagon]

^ That's assuming you're wanting essentials to handle the chat format as well.

[wheat jay]

Any recommend scoreboard plugin support PAPI?
Budget: FREE

[twin juniper]

@toxic wagon This is the setting I was trying to check:

# The following list value states that all players in group `guests` and `admin` are to be teleported to spawn when joining.
spawn-on-join:
- guests
- admin

[wanton stratus]

Hey Konvett! Please don't tag staff members.

[toxic wagon]

Ask in #general @wheat jay

[twin juniper]

I am set as admin and when I log back in, I spawn in the same spot.

[toxic wagon]

Yeah it should work fine if you use EssentialsX @twin juniper

[twin juniper]

Hmm.

Maybe I set it up wrong.

[hasty tree]

make sure you're not op

[wheat jay]

Imortalshard Now I asked in #general

Anyone to help me xD

[twin juniper]

Hmm, yeah I'm not op.

[toxic wagon]

@twin juniper Do you have EssentialsX and EssentialsXSpawn installed?

[twin juniper]

I do

Hmm, here's something.

If I take admin away from myself it works. But, the EssentialsX config uses the term guests but the base LuckPerms role is called default.

[toxic wagon]

Then change it to default instead of guests

[twin juniper]

How do you negate a permission?

[toxic wagon]

Add false after the permission node in the command

[twin juniper]

Ty

[crystal latch]

I am using luckperms, and I just installed Nucleus. Now when I try to join my server is says "A database error occured whilst loading permissions data. Please try again later ". I havent changed anything in Luckperms or Nucleus since installing Nucleus. Do I need to enable it in Luckperms or something? If so, where and how?

[toxic wagon]

@crystal latch What do the errors in your console say?

[crystal latch]

User Authenticator #6/ERROR [luckperms]: Exception occurred whilst loading data for 13470271-c43e-4277-beab-510fbbc577ec - Optional[GoobymanGDA]

[toxic wagon]

Send the full error via hastebin.com

[crystal latch]

How do I send it?

[toxic wagon]

Copy and paste the error into hastebin.com then save it and send the link

[crystal latch]

Wasnt sure how much to copy and paste from the console

https://hastebin.com/unovidaxuf.coffeescript

Wait that wasnt enough one sec

[toxic wagon]

The console is chopping it off, after a fresh restart, grab the full error from the latest.log

[crystal latch]

Where do I get to latest.log?

[toxic wagon]

Should be with your server files in a folder called logs

[crystal latch]

https://hastebin.com/ovonifapuw.md

[toxic wagon]

You have a syntax error in one of the files.

yaml files.

[crystal latch]

regarding nucleus?

[toxic wagon]

- *.* Whereever you have that set

[crystal latch]

oh so just delete that and I should be good?

[toxic wagon]

No, fix the syntax error then restart and it will be fine

[crystal latch]

So that was set in-game before even having nucleus. Should I erase the groups and tracks and try then? I didnt get very far so it wouldn't be too bad.

[toxic wagon]

Just fix the syntax error in then file and it will work fine.

[crystal latch]

I dont know what the syntax error is?

[toxic wagon]

Copy and paste the file where - *.* is located into hastebin.com and send the link and i'll show you where the error is

[crystal latch]

name: owner

Thats all thats in that file

[hasty tree]

it should just be *

[crystal latch]

What should be *

[toxic wagon]

That permission

[hasty tree]

you can't have *.*

[crystal latch]

Its not in there anymore. The file literally just has

name: owner

The group was created in-game with the command

[toxic wagon]

Is there somewhere else it's been added, if it's not in the file try a restart and see if it still gives you the error

[crystal latch]

ill check

[toxic wagon]

It doesn't matter how it was created, just matters that it's * instead of *.*

[crystal latch]

Can I send you another hastebin?

[toxic wagon]

Yeah

[crystal latch]

https://hastebin.com/esataquraw.md

The mod spongeforge was designed for forge 14.23.5.2768 but version 14.23.4.2705 is in use. It may not work properly

Is this the problem?

[toxic wagon]

From that hastebin it looks like luckperms is working fine now, no errors for luckperms.

[crystal latch]

So is it on Nucleus's end because im still getting the same message when i try to join the server?

[toxic wagon]

What does the console message say then?

[crystal latch]

User Authenticator #2/ERROR [luckperms]: Player connection was re-allowed for 13470271-c43e-4277-beab-510fbbc577ec

https://hastebin.com/unuyovujew.bash

[toxic wagon]

Exactly the same issue, you haven't fixed it. You need to change *.* to *

[foggy quartz]

How to i remove everyone from a group?

[crystal latch]

I completely deteled .

I completely deleted the entire folder it was in

I was just a group folder

[toxic wagon]

lp bulkupdate users delete "permission == group.<groupname" @foggy quartz

@crystal latch Instead of deleting everything why not actually try to fix the issue. It's obviously still getting it from somewhere unless you haven't restarted.

[crystal latch]

I only deleted the Owner.yml file

[foggy quartz]

@toxic wagon soo /lp bulkupdate group Eredon

[wanton stratus]

Hey |ҡε૨รƭѵαҡαɳƭเε|🎄! Please don't tag staff members.

[toxic wagon]

@foggy quartz Use the command exactly as i said it

[crystal latch]

IIll look for .

[toxic wagon]

An it needs to be done from console @foggy quartz

[foggy quartz]

Yea i know

[crystal latch]

Ok, finally found it. was hiding very well in the user file. Everything works now. Thank you so much for you time and your patience. You are very good at what you do!

[toxic wagon]

Just give the player the permission for the command and set it to false after the permission node.

[foggy quartz]

200 iq

[toxic wagon]

/lp user/group <name> permission set <permission node> false

All luckperms permissions will just give you acess to all luckperms commands.

You can use luckperms autoop feature though if you're wanting luckperms to handle op

https://github.com/lucko/LuckPerms/wiki/Configuration#auto-op

[foggy quartz]

Anyone able to help with my issue. I keep getting the following error when trying to connect to my server.
[LP] A database error occurred whilst loading permissions data. Please try again later.

[toxic wagon]

@foggy quartz What errors are you getting in console?

[foggy quartz]

Heres the console from a fresh restart to attempting to join.

https://pastebin.com/ADYJGYCy

[toxic wagon]

Caused by: me.lucko.luckperms.lib.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: Unknown character set: 'utf8mb4' You need to update your mysql database. You might be using an outdated version @foggy quartz

[foggy quartz]

Hmm okay. I'll have to take a look.

I dont know how tup see if im using outdate mysql =3=
I've tried using my MySQL provided by my server host and my MySQL database hosted by GoDaddy neither are liking it.

[toxic wagon]

The same error for both databases?

@foggy quartz

[foggy quartz]

Thats correct yes

[toxic wagon]

Do you know where to run sql commands for the database?

[foggy quartz]

I'm assuming thats where it says "Run SQL query"?

[toxic wagon]

Yeah

[foggy quartz]

Yeah I'm there now

[toxic wagon]

Run the query SELECT VERSION()

That will show you the version.

[foggy quartz]

VERSION
5.1.73

[toxic wagon]

You might need to check how to update it. As that error usually means it's outdated.

[foggy quartz]

No worries I'll look into it.

Thanks for helping me so far though

I might have to stick to H2 for now.

Is there any dev of LP here:)?

[toxic wagon]

@foggy quartz Why, what do you need?

[foggy quartz]

is it possible that i can set everyone to default ?

[toxic wagon]

Use the bulkupdate command and remove membership from all groups. Then everyone will be set to default.

[foggy quartz]

Im asking stupid questions am i

I cant find anything regarding updating MySQL =3=

[lapis ibex]

@foggy quartz are you talking about literally updating your MySQL server or switching to MySQL?

[foggy quartz]

literally updating it? Thats the impression I got from Imortalshard? 😮

If you're able to take a look at my issue I'm facing I'd greatly appreciate it.

[toxic wagon]

@lapis ibex He's got the utf8mb4 issue which was caused by an outdated MySQL database if I remember correctly from last time I saw it here.

[lapis ibex]

I thought so. Just making sure

[foggy quartz]

The thing Is I cant find anything regarding updating to a more/most recent version on phpmyadmin.

[lapis ibex]

What OS is the MySQL server running on?

You don’t update (through) phpmyadmin

[foggy quartz]

Oh my phpmyadmin is provided through ggservers.com. I have MySQL databases provided on godaddy if thats any use?

[lapis ibex]

I see. That might be difficult then

Try reaching out to their support

And ask if they can move you to a more up to date MySQL server

It’s ridiculous that they’re using a version several years (!!!) old

[foggy quartz]

I'll contact them now. I'll also contact godaddy see if they can too! Thanks guys!

[lapis ibex]

Contact godaddy

phpmyadmin is literally just an interface

It has nothing to do with the server

[idle leaf]

its not workin

[toxic wagon]

@idle leaf Then read the console and see what the startup errors are.

[foggy quartz]

godaddy cant update it.

What are my other options? should I just stick to H2? I'm only running 1 server I just wanted the MySQL so I could user the web editor.

[toxic wagon]

You don't need MySQL for the web editor

H2 works perfectly fine for a single server.

[idle leaf]

wot

[toxic wagon]

Otherwise ask your host to update their MySQL database @foggy quartz

@idle leaf Check your console for errors when you start the server.

[idle leaf]

that gonna take ages

[foggy quartz]

Oh okay. I'll see if I get any errors with H2. thanks!

[toxic wagon]

@idle leaf why. Server startups don't take long usually.

And its pretty easy to find errors.

[idle leaf]

no i mean go finding it

in term

[toxic wagon]

Start your server then upload your latest.log to hastebin.com then send the link here.

[idle leaf]

i downloaded latest

[toxic wagon]

What version of spigot are you running

[idle leaf]

like mc vers?

1.8

[toxic wagon]

Use 1.8.8

[foggy quartz]

Thanks guys!

[idle leaf]

.

y

[toxic wagon]

1.8 has security issues that were fixed in 1.8.8

[idle leaf]

..

fuck it

[toxic wagon]

So update to 1.8.8 to use luckperms.

[idle leaf]

im just gonna use essentials

smhh

[toxic wagon]

.... it won't change anything server side. Just the version. It's not hard. Just use 1.8.8 @idle leaf

[idle leaf]

tbh idrc

im just testing

idek how how to port forward me rooter

cuz its gay

[queen latch]

no u

[idle leaf]

no u

[toxic wagon]

It you aren't going to put in the effort to make things work @idle leaf good luck with a server.

[idle leaf]

when i make a real server, trust me i will

im running this one off my pc

unless u guys can help me port forward that would be g8

thats me rooter

i tried

[toxic wagon]

Your routers documentation/website will have guides on how to port forward. Just Google your router and portforwarding.

[idle leaf]

i did

[toxic wagon]

It's not usually hard. Just have to find the section in the routers configuration and set it up.

[idle leaf]

@toxic wagon that right

[wanton stratus]

Hey oXo! Please don't tag staff members.

[idle leaf]

Hey @wanton stratus! Stfu.

[toxic wagon]

@idle leaf Seems fine.

[idle leaf]

ok ill try

nope

didnt work

@toxic wagon ^

[wanton stratus]

Hey oXo! Please don't tag staff members.

[idle leaf]

should i just do TCP

[lapis ibex]

MC is TCP

[idle leaf]

k

its still not working @lapis ibex

[wanton stratus]

Hey oXo! Please don't tag staff members.

[lapis ibex]

Anyways I think it’s #general at this point

[foggy quartz]

Why does it show it twice?

[lapis ibex]

Becuase displayname contains the prefix

You can turn that off

Or use a different placeholder

[foggy quartz]

How do I turn that off or change the placeholder, please?

[lapis ibex]

Check the config

[foggy quartz]

I cant find what I think I'm looking for.

[manic pier]

First time using LuckPerms , where is the exactly the problem? ( It is BUNGEECORD )

Did i missing something?

[lapis ibex]

Any chance you're using stuff like AutheMe?

[manic pier]

EhLogin

[lapis ibex]

There you go

Try running a non cracked server or not using plugins that mess with UUIDs

[manic pier]

Well i found a way around using LuckPerms on backend servers and BungeePerms on Bungeecord, still thanks for help

[fiery granite]

I have Argument based command permissions working for one set of permissions for staff, they can add parent for a specific group, but they are refused to addtemp parent, this was working at one point, I cant see whats wrong here, I even tried verbose and it suggested luckperms.user.parent.addtemp in general, but I added this and it didnt work.

- luckperms.user.parent.addtemp.privateer:
    world: PirateCraft_1
    value: true
- luckperms.user.parent.removetemp.privateer:
    world: PirateCraft_1
    value: true
- luckperms.user.parent.remove.privateer:
    world: PirateCraft_1
    value: true
- luckperms.user.parent.add.privateer:
    world: PirateCraft_1
    value: true

The parent add works but the addtemp does not how comes?

[fiery granite]

Verbose: https://luckperms.github.io/verbose/#KHn5HuiV6i

I tried that luckperms.user.parent.addtemp.modify.others too, but nothing.

[scarlet vale]

Any current known connection issues to bytebin? Have someone who's trying to use spark and it's erroring on the get request to it saying it's failing to connect.

[echo nymph]

Its me actually. I've also problems with luckperms. I have a few servers and luckperms on each. I can use lp editor for 2-3 times and then it has problems with connection. Then i can restart server to repair it or just switch to another one connected to our network and then i can also use it for a few times until break. On spark and Luckperms it says same - that cant connect to bytebin

[subtle spade]

What's the difference between has-false and lacks in the default-assignments rules?

ah, has-false means it has it but it's false, lacks means it doesn't have it 😛

[tired turtle]

exactly

[fiery granite]

Ok I fixed my issue, the verbose does not show that you need other permissionz

An issue there

[foggy quartz]

What economy plugin would yous suggest for sponge?

[tough stone]

how to set a prefix using luckperms

[tired turtle]

/lp group <group> meta addprefix <weight> <prefix> @tough stone

[tough stone]

Thank you

[tired turtle]

@foggy quartz People recommend Nucleus for Sponge. It's their Essentials

[foggy quartz]

ah so nucleus can do economy as well?

So i dont need something like ecolite?

[agile sun]

Hey lads, are the permissions stored in a database or is there a file I can edit like with PEX?

nevermind x

[foggy quartz]

https://hastebin.com/tecibajodu.md

always an error if I update it to the newest version

like wth

can some1 help me?

it is working if I do lp editor in the console

but not in server

with all commands in game

[atomic knoll]

Is there any PHP library for luckperms? (mysql), before i start writing my own mysql direct queries :p

[agile sun]

I know it's a bit small, but can I manually re-arrange the ranks in the web editor?

[atomic knoll]

eh not gonna bother, ill just use rcon

[agile sun]

It feels a bit annoying seeing as we'll be having 20 or so ranks

[foggy quartz]

Some1 can help me? Each update I getting an error!

https://hastebin.com/tecibajodu.md

[magic root]

I don't see anything in that hatebin

[green acorn]

hatebin

[magic root]

A typo to be sure, but not one I regret.

[bold galleon]

Can someone help me with this error in luckperms bungee?

https://pastebin.com/s44XbmhZ

[foggy quartz]

How do i add a player to a group? 😃 Also what is the command for a group to inherit perms

[bold galleon]

/lp user (user) group add (group)

/lp group (group) parent add (parentgroup)

to set a group and remove all inherited groups for the player:
/lp user (user) group set (group)

[foggy quartz]

So if i were doing donor ranks i'd want to do set group instead of add?

[green acorn]

add means they keep all their current groups and are now part of the extra group

set means they are only part of that group and they lose all the other ones

It's down to choice really, but I'd personally add donor ranks instead of setting them

[foggy quartz]

Will do, i don't suppose you happen to know how to give player names colours after the prefix?

Like with essentials you'd do &d[Prefix]&2 or something

[green acorn]

That should just work when you set the prefix, but it depends on your chat formatting plugin

[foggy quartz]

I think im using simple chat, would you recommend using a different one?

[sacred panther]

How Do I Setup LuckyPerms For BungeeCord Is There A Video ?????

[toxic wagon]

!bungee

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Network-Installation

[toxic wagon]

!sync

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Syncing-data-between-servers

[toxic wagon]

@sacred panther Read those.

[sacred panther]

But I want a video 😦

[toxic wagon]

Just read them. It's not too hard.

[sacred panther]

What Does LuckPerms must be connected to the same SQL / MongoDB server, and access the same database or collection. mean?

[toxic wagon]

If you want you're permissions and groups to sync across other servers then it's best to hook it into a Database.

[sacred panther]

How Do i do that?

[toxic wagon]

Get a Database then enter the details in the luckperms config.

[sacred panther]

so copy and paste?

[toxic wagon]

Type the database details in. So you can make sure they are correct.

[sacred panther]

i dont understand sorry

[hasty tree]

is english not your first language?

[sacred panther]

it is

but i dont understand Type the database details in. So you can make sure they are correct.

[toxic wagon]

@sacred panther To use a database you need to enter the details for it into the luckperms config.yml

[foggy quartz]

how do i make a rank that i made a default rank that people get when they join?

[toxic wagon]

!default

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Default-Groups

[toxic wagon]

Read that

[foggy quartz]

thx

thcx

thx

[queen latch]

@sacred panther Pebble provides you with a database by the way and there's a guide on the knowledgebase showing how to put the details into the LuckPerms config, search LuckPerms on https://help.pebblehost.com

[hasty tree]

good bot

[vast orbit]

Hello, may someone help me with something simple/

[toxic wagon]

Explain when you need help with and someone will

[vast orbit]

Am I able to add a temperary rank?

Like, for trial supporter, add the rank or the perms for lets say 30minutes?

[hasty tree]

https://github.com/lucko/LuckPerms/wiki/Command-Usage:-Parent#lp-usergroup-usergroup-parent-addtemp

[vast orbit]

That looks like only indivudal permissions

Am I missing something?

[hasty tree]

i sent the wrong page

click it again

[vast orbit]

oh wonderful

thank you!

erm

Okay, so I got that

Is there a way that is can actually change the users rank? Instead of invisably giving them perms?

My goal is to make a Temp Supporter rank. They buy the rank for free- it gives them supporter for 10 minutes, and then reverts back to Member

Its adding the permssions, but not changing the rank display

[hasty tree]

then you need to set weights

so the supporter is higher than member

[vast orbit]

oh okay

wonderful!

[foggy quartz]

hi

im looking for a dev who can set up network global perms with luckperms

im willing to pay to get it done

[toxic wagon]

Why not just do it yourself and learn to use the plugin

[foggy quartz]

i suppose i could try

[toxic wagon]

!bungee

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Network-Installation

[toxic wagon]

!sync

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Syncing-data-between-servers

[hasty tree]

permissions are a very important part of running a server, it is a good idea to know how it works

[toxic wagon]

Those two pages will tell you how to setup a network with global perms

[foggy quartz]

ok ty

[foggy quartz]

Hi, just a question - does the APPLYEDITS code expire?

[tired turtle]

It can

[river heart]

Is this lp verbose being on!

?*

[foggy quartz]

Andre, on average, after how long?

[tired turtle]

IIrc does it work for 24 hours until it expires, due to the bytepin site deleting the content

[river heart]

Im on my phone so i type kind of weird

[foggy quartz]

Ok

[river heart]

I did lp verbose off in the console but it keeps spamming

[toxic wagon]

You need to apply filters with the verbose commands

[hasty tree]

i'm not even sure if that's LP's verbose

usually it's prefixed by [LP] isn't it?

[toxic wagon]

Yeah it is, that's not the verbose

[hasty tree]

yeah looks like this

[river heart]

Yeah im trying to check what it is. Its really weird

Its spamming my console

Its also charging users $0 for chatting

I dont get why but ok XD

[hasty tree]

restart?

[river heart]

Ill try that

[jaunty mortar]

How do I make default group be unable to break or build

I have the default group with no permissions set but can still break blocks a few blocks away from spawn

Plugins I have are luckperms, health bar, essentials, essentialschat

[hasty tree]

you need a plugin to handle build restriction

[jaunty mortar]

What plugin do u recommend

[foggy quartz]

worldguard

[hasty tree]

well you use essentials so you could try essentials anti build

or worldguard is a good one

which requires worldedit

[jaunty mortar]

Ok Im using essentials anti build now

I forgot I needed it

Haven't had a server in a whike

While

Thanks

[twilit delta]

Yo does anyone wanna help me out setting up some server perms, l haven’t had the time

[toxic wagon]

You should set up your own permissions @twilit delta

[sacred panther]

@queen latch how did you know I use pebblehost

[wanton stratus]

Hey Minecrafterboy13! Please don't tag staff members.

[sacred panther]

Hey Clippy! Please don't tag staff members. LOL

Oa your staff for both PebbleHost And LuckyPerms

[hasty tree]

LuckPerms *

[sacred panther]

LOL

[foggy quartz]

When you want to have a successful server

But learning how to config sucks

Boring*

[hasty tree]

gotta put in the work to get the rewards mate

welcome to the real world ™

[foggy quartz]

i just updated the latest version of bungeecord and luckperms, and i got a distinct error

bungeecord version is B1392

LP version is LuckPerms-Bungee-4.3.81

error was:

22:46:56 [WARNING] Exception encountered when loading plugin: LuckPerms
java.lang.IllegalAccessError: tried to access method com.google.common.collect.ImmutableList$Builder.<init>(I)V from class com.google.common.collect.Streams
at com.google.common.collect.Streams.concat(Streams.java:148)
at me.lucko.luckperms.lib.text.serializer.LegacyComponentSerializerImpl.<clinit>(LegacyComponentSerializerImpl.java:47)
at me.lucko.luckperms.lib.text.serializer.ComponentSerializers.<clinit>(ComponentSerializers.java:47)
at me.lucko.luckperms.common.util.TextUtils.fromLegacy(TextUtils.java:52)
at me.lucko.luckperms.bungee.BungeeSenderFactory.sendMessage(BungeeSenderFactory.java:65)
at me.lucko.luckperms.bungee.BungeeSenderFactory.sendMessage(BungeeSenderFactory.java:42)
at me.lucko.luckperms.common.sender.AbstractSender.sendMessage(AbstractSender.java:89)
at me.lucko.luckperms.common.plugin.AbstractLuckPermsPlugin.displayBanner(AbstractLuckPermsPlugin.java:328)
at me.lucko.luckperms.common.plugin.AbstractLuckPermsPlugin.enable(AbstractLuckPermsPlugin.java:98)
at me.lucko.luckperms.bungee.LPBungeeBootstrap.onEnable(LPBungeeBootstrap.java:124)
at net.md_5.bungee.api.plugin.PluginManager.enablePlugins(PluginManager.java:247)
at net.md_5.bungee.BungeeCord.start(BungeeCord.java:280)
at net.md_5.bungee.BungeeCordLauncher.main(BungeeCordLauncher.java:56)
at net.md_5.bungee.Bootstrap.main(Bootstrap.java:15)

sorry for the long message. I am too lazy and tired to create a github account to post this in

[tacit ore]

how to set subgroups @ luckperms like GroupManager ?

[hasty tree]

they are called "parents"
https://github.com/lucko/LuckPerms/wiki/Command-Usage:-Parent

there is also a migration feature will import all your groupmanager data

[foggy quartz]

Turbo?

Will I have to create a github issue for this issue I'm having? Or will Luck or a dev look at my comment?

[hasty tree]

probably, i don't know what is wrong

have you set a messaging service?

[hollow snow]

I need help :c

[delicate stream]

Outdated bungeecord version?

[hollow snow]

maybe

i trust CloudNet... xD

But i´ll Check it now

okay... it is the lates version

[hasty tree]

are you using the latest version of luckperms bungee?

[hollow snow]

yes

[hasty tree]

4.3.81?

[hollow snow]

yes

[hasty tree]

can you try the previous version?
https://ci.lucko.me/job/LuckPerms/856/

[hollow snow]

it works xD

thx ❤

[hasty tree]

thought so

[hollow snow]

so the 4.3.81 is buged...

xD

gj

[hasty tree]

luck updated the dependencies which appear to have broken things a bit

[hollow snow]

🤦

[hasty tree]

he'll get on to fixing it asap :)

[hollow snow]

^^

[frail mason]

anyone online to help?

im having this issue

https://pastebin.com/MR4brRAd

[hasty tree]

Well first you need to update luckperms. Your version is very old.

[foggy quartz]

LOL

[fathom smelt]

hi guys i'm doing a network (obviously) with bungee, so my project is have lobby, skyblock and the bungee, i decide luck perms to manage my perms, and i have some problems to install my database.
anyway i come here to try get some tutorials (liks or maybe youtube tutorials)

[toxic wagon]

!bungee

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Network-Installation

[toxic wagon]

!sync

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Syncing-data-between-servers

[toxic wagon]

@fathom smelt Read those, they will help to install it all correctly.

[fathom smelt]

thx a lot dude i really appreciated.

[queen latch]

@sacred panther I knew because I work for Pebble, I'm Jay

[echo pivot]

Howdy

[toxic wagon]

o/

[echo pivot]

What are people using to have the ranks displayed besides a player name/above their heads

Above there head more so than besides the name

[toxic wagon]

NameTagEdit is good, AnimatedNames is another good one

[echo pivot]

Ah yeah perfecto

Thanks a lot

[foggy quartz]

i use the TAB plugin

[subtle spade]

is weight only used for meta? or is it also used to calculate the primary groups?
I have some rankup ranks ranging from 100-5,000 in weight. I put donor ranks at 10,000-10,005 and staff ranks at 100,000-100,005
and then I reset all primary groups but now staff are getting their primary group set to a donor rank instead of their staff rank which weight should be higher
And under meta it shows the admin rank with the correct weight making me think weight is only used for meta

I did change the config setting to set primary based on parent weight

https://cdn.discordapp.com/attachments/362511548419145729/539433316885987358/Screen_Shot_2019-01-29_at_12.15.09_am.png
https://cdn.discordapp.com/attachments/362511548419145729/539433397815214091/Screen_Shot_2019-01-29_at_12.15.35_am.png
https://cdn.discordapp.com/attachments/362511548419145729/539433737277014016/Screen_Shot_2019-01-29_at_12.16.43_am.png
https://cdn.discordapp.com/attachments/362511548419145729/539433771787878415/Screen_Shot_2019-01-29_at_12.16.58_am.png

wow

[mint creek]

Weight is also used to calc the primary groups as far as I know

[subtle spade]

I'm dumb

in this pic : https://cdn.discordapp.com/attachments/362511548419145729/539433737277014016/Screen_Shot_2019-01-29_at_12.16.43_am.png
I set the name instead of weight 🤦

[mint creek]

lol

Have you managed to setup your rankups to have a lower weight than your staff rank and have them still operate as intended?

[subtle spade]

I just use the weight for prefixes

we use tracks for rankup promotion

[mint creek]

Damn never thought of using tracks, that might solve the issue that I am currently experiencing

[subtle spade]

what issue are you having?

we just appended all rankup ranks and use "/lp user <user> promote rankup"
to promote them

[foggy quartz]

i dont know what it is but its a huge error :3

[mint creek]

@subtle spade We are using EzRankspro, and I currently have my ranks setup where my rankups have the highest weight in luckperms and the staff ranks the lowest, but when I try to set my staff ranks to have a higher weight then everything breaks and I am unable to use the rankup system

@foggy quartz from the looks of it, you ran out of space on your sql database, try creating a new one and just adding luckperms to it to see if it fixes your issue.
you can do /lp export <file> to backup everything and then /lp import <file> to restore everything on new database

[foggy quartz]

so i have to many databases?

[subtle spade]

I think in EzRanksPro you can chose what commands to run on rankup?
Can't you set it to
/lp user <user> parent remove <oldrank>
/lp user <user> parent add <newrank>

or /lp user <user> promote rankup

we have a rankup plugin which I made so we set it to that

[mint creek]

In my personal experience some hosts limit the amount of entries per database, we had that issue with our previous host, so we split our setups so that luckperms has its own database and then another for all the rest.

Ok thanks @subtle spade, I'll try that and see if it works

[subtle spade]

gl 😃

[foggy quartz]

i'm hosting my own database but i think i focked some things up in my VPS

[bitter coral]

Ü0a

[random spire]

hello 😃

[bitter coral]

Can /lp or /lpb be run in command blocks and can I disable this in the config or do I need a extra plugin for this

[random spire]

i'm here to ask anyhelp if someone is free.
I can ot show Role in game

i tryied with groupmanager but nothing too

may be a problem with essential chat but i can't fixe that prob

[bitter coral]

Do you use EssentialsX (it's newer) and do you have Vault installed?

[random spire]

yeah let me show you a picture

using essentialsx 2.16.32

EssentialsX-2.16.0.32.jar

[bitter coral]

Vault too? (Can't see it on the pitcure good)

[random spire]

yeah but i don't know the version

i can't say if it's the good one or not

i didn't found on google

i don't know if it can help you

it my config groupmanager/essentials

[sour root]

on my server how do i make it so i can do anything

[bitter coral]

Do you have Groupmanager and LuckPerms installed at the same time?

[random spire]

nop i did the transfer like explain

it works, all has the command and other things

but can't see role in game

just the role "default"

[bitter coral]

@sour root normally you give yourself * perms or something like essentials.*, because * can cause errors

[sour root]

how do i do that

[bitter coral]

To just use LuckPerms you need luckperms.*
Read the usage page

!usage

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Usage

[bitter coral]

Try looking into Essentials config for the chat format

Maybe there is something not correct

[random spire]

like you can say in chat i should have "Master" in yellow, and my bro should have "Aventurier" in green

[sour root]

so that command will work in my console

[bitter coral]

It should be explained there, but yes

[sour root]

where can i get the perms for nucleus etc

[bitter coral]

@random spire did it worked with groupmanager?

[random spire]

no

[bitter coral]

Nucleus should have it documentated somewhere, you can usr verbose too

[random spire]

i can't fixe that problem since 3 days

[bitter coral]

!verbose

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Verbose

[random spire]

i tryied to merge to luckyperms it works but same problem

default for everyone

but perms are ok

[sour root]

so i typed that command and it didnt work

wait one sec

[bitter coral]

How I said, maybe something with the EssentialsChat format, can you do /lp user <user> info?

[random spire]

yep

i can do that

i can do all command configured in groupmanager

and merged to luckyperms

but i still can't fixe the problem with essentials

[bitter coral]

I mean does it show the prefiy there

[sour root]

what are the perms for toggledownfall etc

[bitter coral]

If the prefix is not shown at /lp user <user> info it isn't even set

For minecraft commands the perm is minecraft.command. <commandname>

[sour root]

ty

[bitter coral]

It stands somewhere on the bukkit wiki

[random spire]

the prefix is marked yeah

but i'm in default in chat

[bitter coral]

Moment...it shows the default prefix?

[random spire]

yeah

for everyone

[bitter coral]

Then you may set the weight of the prefix to low

lp group <group> meta setprefix <number> "<prefix>" so you can set a prefix in LuckPerms, as higher the number as higher is the priority for the prefix

[random spire]

let's try

still no change

[bitter coral]

Hmmm... Try /lp group master setweight 1000

[random spire]

i'm trying since 3 days, i think there is a bug with essentials

[bitter coral]

You can also try out VaultChatFormatter to handle the chat, that should work

[random spire]

stil nothing 😦

where can i found vaultchat formatter ?

[bitter coral]

https://www.spigotmc.org/resources/vaultchatformatter.49016/

[random spire]

it's just a different version of vault ?

[bitter coral]

Be sure to delete EssentialsXChat

[random spire]

ok

do i have to delete vault.jar ?

[bitter coral]

No, it needs Vault and just formats the chat

[random spire]

ok

i'm reloading the server

thanks a lot for trying to help me

that's kind of you, 3 days bored about that

ok really good

[wispy heart]

can someone help me im getting this error https://pastebin.com/0Hwax7fr

[random spire]

vaultchat fixed everything 😃

thanks a lot 😄

[foggy quartz]

@elfin egret Added this line so 1000 per second bots wouldn't crash server, but sometimes server crash with this error randomly not from bots, how to fix it? https://hastebin.com/fakelewohi.sql

[wanton stratus]

Hey Lukass! Please don't tag staff members.

[elfin egret]

@foggy quartz Would you mind creating an issue on GitHub

[foggy quartz]

Done!

[elfin egret]

Thanks

I'll look into it later

[slim ice]

getting error on bungee at startup, using LuckPerms-Bungee-4.3.81-#857

https://paste.helpch.at/itewoquyit.makefile
I fixed by upgrading to LuckPerms-Bungee-4.3.81-#859

[round plume]

https://hastebin.com/pogokaweme.apache

Its the latest build

[foggy quartz]

I'm having an issue where all my ranks are displaying in lowercase, I want the first letter capitalised however luckperms doesn't allow me to create groups with capital letters? =3=

[green acorn]

Use a prefix

[slim ice]

@foggy quartz you will have to rename the group or use a prefix or suffix as the group name

[foggy quartz]

how would I go about renaming the group and forcing it to have a capital letter?

[slim ice]

there is a command for renaming groups, not real sure on the command used once when i set up my LP about a year ago

I found it easier to use prefix
/lp group default meta addprefix 300 &7Lobby

300 is a weight

[foggy quartz]

I tried prefixes but they where part of the displayname and I couldnt see how to stop it being in the display name =3=

Will try that now.

Now this is my issue. I want the prefix to be where owner is, within the [].

[brazen fox]

How do I migrate a old user file (I'm using yml storage) to a new setup? I've been replacing the one that was generated but it keeps wiping it. I'm using the same ranks etc

[green acorn]

export and import?

[brazen fox]

Its a luckyperms save. it wasn't loading so I replaced it with a older save I had but I cant seem to get the new user data into it

is there another place user data is stored?

[lapis ibex]

All data is stored in LPs config folder @brazen fox

[brazen fox]

right but what is keeping me from loading new user data? it seems to wipe it every time I do and there's no errors in console

[deft mango]

is there a list of luckperms' permissions somewhere?

[lapis ibex]

@deft mango check the wiki page "Command Usage"

@brazen fox first of all, what's your storage type?

[brazen fox]

yml

[lapis ibex]

And what do you mean by "loading new user data"?

[deft mango]

oh they're listed separately

i was wondering if there was like a page where they were all together

[lapis ibex]

No

[deft mango]

oof

[brazen fox]

I had a issue with luckperms not loading this morning so I saved a copy of the user data file and deleted the rest. I then added my ranks and user files to the newly generated yml storage but user data isn't loading.

[lapis ibex]

Can you try to describe what you mean exactly by user data not loading?

Like for no one? Only for a few? Players don't have groups anymore?

[brazen fox]

players are all default

I uploaded the file that had everyone's uuid and ranks but that file gets wiped every time I restart.

could it have something to do with the UUID cache?

[lapis ibex]

Are you using yml combined?

[brazen fox]

yaml storage?

[lapis ibex]

In the storage method

[brazen fox]

yes

[lapis ibex]

Then I'm guessing you have a syntax error in the file

Run it through a YML linter

[brazen fox]

tried that said it was valid

[foggy quartz]

Is it possible to set a users rank?

for example my current rank on my server, is it possible to set myself to member?

[reef phoenix]

Hello,
@elfin egret , please, fix the bug in LuckPerms: https://github.com/lucko/LuckPerms/issues/1407

[wanton stratus]

Hey BestMark! Please don't tag staff members.

[reef phoenix]

Ok

[lapis ibex]

@foggy quartz check this page:

!usage

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Usage

[lapis ibex]

@brazen fox really not sure what to suggest

Did you manually edit the file?

[brazen fox]

I haven't edited it but I did manually edited the groups file which started all this but I undid that.

[devout crown]

Heya, I was wondering if this is possible with luckperms: promote a user to the next rank in the ladder upon playing x amount of minutes, hours, days, etc.

I know this can be done with external plugins but was wondering if Luckperms alone can do this by itself or if it isn't a feature.

[lapis ibex]

No this isn't a feature

[devout crown]

Alright, thank you ^^

[lapis ibex]

And it isn't one because LP is a permissions plugin and not a playtime promotion plugin

[devout crown]

I understand, but since it has ladders and timed permissions I was wondering if this also was an option.

[lapis ibex]

No

[devout crown]

Alright, thank you in any case BrainStone. Have a nice day

[bitter coral]

Can /lp and /lpb be used in commandblocks, and can it be disabled? Or do I need a extra plugin for that?

[lapis ibex]

@bitter coral /lpb can't like with all bungee commands

[bitter coral]

And /lp?

[lapis ibex]

You need OP to use command blocks anyways

[bitter coral]

Yeah, but I would like to have people on my build server be able to use command blocks, but not to give themself perms troughout the whole network

[lapis ibex]

I'm pretty sure there is an option to net let OPs use LP commands

and command blocks are OPs for that matter

[bitter coral]

Will check that lut tommorow

[silent vault]

bro

andre

@tired turtle help

[wanton stratus]

Hey Darkness! Please don't tag staff members.

[bitter coral]

Just ask

[silent vault]

oh ok

need help

[bitter coral]

Just ask your question

[silent vault]

ok i put luck perms on my server and im op but when i try the command /lp user xboxmadkian10 edtor

it dosnt work

[bitter coral]

Is it showing a error message?

[silent vault]

ye

[bitter coral]

That you doesn't have perms?
If then run lp user xboxmadikan10 permission set luckperms.* true

[lapis ibex]

editor

[silent vault]

it keeps saying this

what do i do

[delicate stream]

check your server logs

[silent vault]

what in console

[delicate stream]

More than likely there is some information on what the issue is in there

Also, make sure that you're using a recent build of LP

[silent vault]

its saying this is console

[lapis ibex]

Oh boy. Are you happening to use something like 4.1.x?

[silent vault]

im using the one what is the one in 1.8.8

[delicate stream]

You should be using the latest version

[lapis ibex]

All recent versions support 1.8.8

[silent vault]

oh

should i get latest one

[lapis ibex]

You should be using the latest version

[silent vault]

ill do that now

[bitter coral]

Isn't the latest broken, because Luck upgraded some libs and that is causing errors, I read something above

[elfin egret]

already fixed :p

[silent vault]

thanks

i fixed it

[bitter coral]

Ah, good, need to update my LuckPerms jars then.

[foggy quartz]

Is there a way to set the name a colour with the rank?

[delicate stream]

easiest option is to abuse the prefix and let it fall through, e.g. set the name color at the end of the prefix

[foggy quartz]

What is the placeholder for rank in featherboard?

[round plume]

Whats the latest ver of luvkperms

[elfin egret]

https://luckperms.github.io/

always there

[round plume]

28.01 16:11:12 [Server] ERROR Error occurred while disabling LuckPerms v4.3.83 (Is it up to date?)

[foggy quartz]

What is the placeholder for rank in featherboard?
I have LuckpermsMVDWhook in the server 😉

@delicate stream How would i do that with abusing the prefix?

[delicate stream]

set the name color at the end of the prefix

"[Owner]&7" for ex

[foggy quartz]

So /lp group owner meta addprefix &c[Owner]&c for example?

[round plume]

anyone help?

[tired turtle]

We can't help without any info

[tawdry tapir]

Hello 😄

if i use luckperms for bunge then i dont need the nurmal luckperms in the subserver ? or i need booth ?

[round plume]

https://hastebin.com/oqavifudas.apache

[foggy quartz]

What is the placeholder for rank in featherboard?
I have LuckpermsMVDWhook in the server 😉

[tired turtle]

@tawdry tapir LuckPerms Bungee won't manage permissions on your spigot servers

@foggy quartz https://github.com/lucko/LuckPerms/wiki/Placeholders

[tawdry tapir]

then i can remove luckperms from my spigot subs ?

[tired turtle]

Just replace %% with {}

@tawdry tapir

[tawdry tapir]

ah won't

sorry my english is realy bad

[tired turtle]

@round plume What server type and version are you running?

[foggy quartz]

If you have a group inheriting off another, how do you override the prefix?

[round plume]

Paper 1.8.8

[tawdry tapir]

with the weight

[tired turtle]

@round plume Nope....

[round plume]

..

[tired turtle]

It would show 28.01 16:11:11 [Server] INFO |___ | Running on Bukkit - Paper

And not 28.01 16:11:11 [Server] INFO |___ | Running on Bukkit - CraftBukkit

[tawdry tapir]

ist it posible to remove some permissons just for one subserver ?

[tired turtle]

@foggy quartz You simply set a prefix for the group that inherits the perms and it should override the other one

[round plume]

https://gyazo.com/2da61428d54c2ec674695d5a44dd40f3

[foggy quartz]

kk, so ive also setup the prefix like this but i cant seem to get the name coloured >.>

[tired turtle]

@tawdry tapir Yes. Just use the context server=<server> in the command. For example /lp user Andre_601 permission set essentials.fly false server=survival

[tawdry tapir]

ah nice ty @tired turtle

[wanton stratus]

Hey Ascanda! Please don't tag staff members.

[tired turtle]

Don't forget to set a name in the config.yml of LP

Never trust dashboards @round plume
They can say anything, but it doesn't need to be true

[round plume]

https://gyazo.com/8e1d74425146c31c7da8920ad4b1af89

[tawdry tapir]

you meen # If LuckPerms should use the "server-name" property from the "server.properties" file as the

"server" option within LuckPerms.

use-server-properties-name: false

[foggy quartz]

Can i pm u a sec andre?

[tired turtle]

Again Addman: A dashboard (Especially a bad one like Multicraft) can tell you everything.

@tawdry tapir No

Literally the first option in the config

[round plume]

Would you like to see a screen shot of the files in the server?

[tawdry tapir]

ah i find it

[round plume]

You can ask @queen latch

[wanton stratus]

Hey Addman! Please don't tag staff members.

[tawdry tapir]

works this command for goup also ?

[delicate stream]

If the prefix color isn't bleeding through, you're either overriding it in your chat format, or your chat plugin is working in a way that that doesn't work

[tired turtle]

@tawdry tapir Yes. But only for group add and not group set.

[tawdry tapir]

/lp group default permission set essentials.fly false server=survival <- this dont work ?

[round plume]

remove server=

[queen latch]

@round plume One idea I had, try deleting the plugins/LuckPerms/libraries folder

[round plume]

/lp group default permission set essentials.fly false survival

[foggy quartz]

kk, so ive also setup the prefix like this but i cant seem to get the name coloured >.> @tired turtle

[wanton stratus]

Hey Anima! Please don't tag staff members.

[queen latch]

Or it might be called libs

[foggy quartz]

oops sorry

[tired turtle]

Sounds more like an issue with your chat plugin rather than LP

LP only provides the prefix. Nothing more

[ripe kernel]

I need help with my database. My servers all connect to the MySQL database and sync, but the bungee does not

[foggy quartz]

okie

[round plume]

No

[foggy quartz]

What chat plugin would you recommend?

[ripe kernel]

DELUXE CHAT

[round plume]

^

[foggy quartz]

For sponge*

[tired turtle]

nucleus has a chat feature and is more or less the essentials for sponge

[tawdry tapir]

hast spigot a permission to disbale chat ?

[hasty tree]

Depends on your chat plugin

[tawdry tapir]

use essentials

essentials has just formating perms

[ripe kernel]

any idea on why my bungee will not connect ith mysql but all the servers will?

[frosty nova]

Hello. Have a question about MySQL SSL connection

is it possible to set
useSSL: true
verifyServerCertificate: true
and provide my own certificate?

@ripe kernel what errors are you getting? Check this page: https://github.com/lucko/LuckPerms/wiki/Storage-system-errors

[queen latch]

@frosty nova It would be possible to useSSL true but verifyServerCertificate false if you were using self signed

I believe java has a keyring you could add a self signed ca to, which would add your CA as trusted and allow you to turn verification of certs on

[frosty nova]

oh no, is a Cloud SQL certificate (Google signed certificate)

I just need to know the location path I need to put it in order to verifyServerCertificate to work

I saw in the chat history that someone already did it, but I couldn't find how.

[delicate stream]

iirc you need to add the cert to the truststore using whatever tool java used for that

[frosty nova]

Oh ok, so the connection checks the host's truststore certificates

[delicate stream]

https://dev.mysql.com/doc/connector-j/5.1/en/connector-j-reference-using-ssl.html

[frosty nova]

Roger, thank you.

[delicate stream]

yup

[frosty nova]

Thank you very much.

[ripe kernel]

@frosty nova none of those seem to apply. Do I have to use redis? I have one bungee server and I have 9 World servers the 9 World servers are fine

[toxic wagon]

@ripe kernel How is anyone meant to read that screenshot. It's way too blurry. If it's errors then copy and paste them to hastebin.com then just send the link.

[hasty tree]

yikes

you know you can take screenshots with the computer right

[ripe kernel]

I know. I'm on a VPN that Discord does not allow me to login from I'll send the in a minute

https://pastebin.com/CRjJAq42

[toxic wagon]

@ripe kernel We need to see the full error.

[ripe kernel]

OK

https://pastebin.com/DPGbcQBt

[toxic wagon]

@ripe kernel Are you using sql for the messaging-service

[ripe kernel]

yes

[hasty tree]

try using 4.3.83

[ripe kernel]

https://pastebin.com/z2HzKjyW Now I get errors during config load with 4.3.83

[toxic wagon]

@ripe kernel Can you upload your config to hastebin.com just remove any usersnames, passwords or Ip's

[ripe kernel]

YES

https://pastebin.com/Q2yXZkvL Here is the config minue database name, password and user

[toxic wagon]

The config doesn't look bad, but the server name should be bungee instead of bungeecord there's no need to change it.

[ripe kernel]

With .83 I get an error with the config when it loads. With .80 I only get error when I run a command on bungee. Maybe I need to let it generate a new config file.

[toxic wagon]

Yeah, it can't hurt to let Luckperms-bungee regen a new config. (You are using Luckperms-Bungee on the bungeecord server right?)

[ripe kernel]

Yes, luckperms bungee now 4.83. no errors with new config until I run lpb info command then I get this: https://pastebin.com/Mx4bEnv0

HERE IS THE NEW CONFIG. https://pastebin.com/Wr2V4AMf

[frank owl]

Evening, i was just wondering without using a console how can i add parents to my groups? What is the permission to add to each group? I can't seem to find it.

[toxic wagon]

https://github.com/lucko/LuckPerms/wiki/Usage#making-a-group-inherit-another-group

You can use the commands in-game or via console.

If you're wanting to do it through the editor, just add the permission group.<groupname>

[frank owl]

Thanks a bunch!

[twin juniper]

If I give admin minecraft.* and minecraft.command.____ false, will the .* overwrite the false?

[toxic wagon]

No, the false permission will override.

[twin juniper]

Awesome.

What if it's inherited from default?

[ripe kernel]

any idea on my issue?

[toxic wagon]

Permissions granted directly to the user/group will always override inherited permissions @twin juniper

[twin juniper]

Perfect, ty for the info!

[hearty mulch]

I'm needing some help getting the plugin installed and setup after

[hasty tree]

https://github.com/lucko/LuckPerms/wiki/Installation

and please don't cross-post to other channels

[spark breach]

Can anyone help me out with LuckPerms? Because basically, I have no idea what I'm doing.

[hasty tree]

!usage

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Usage

[ripe kernel]

I still having issues with bungee cord and luckperms for bungee

[hasty tree]

should probably open a github issue otherwise it's just going to get lost in here

[slim hound]

What of luckperms is for 1.8.8?

[hasty tree]

latest

[slim hound]

k

[hasty tree]

@storm talon please don't ask people to vote for your server here, thanks.

@storm talon seriously?

stop spamming, last warning

[wanton stratus]

Hey diamond132! Please don't tag staff members.

[oblique pebble]

🔨 here you go turbo

[hasty tree]

fucking moron

lol thanks @oblique pebble

[foggy copper]

might be a dumb question cause im new to permissions but where could I find a list of permission nodes for every plugin

[toxic wagon]

Check the plugins documentation, they usually have a list of the permissions for that plugin

[foggy copper]

ok great thanks

also i have the vault chat formatter installed but prefixes and chat colors dont work

[hasty tree]

is there a prefix when you do /lp user <user> info?

[foggy copper]

yes

[hasty tree]

do you have vault installed?

[foggy copper]

vault itself no

[hasty tree]

you need vault

[foggy copper]

where can i find that

[hasty tree]

google 'vault plugin' :P

[foggy copper]

lol thanks

[foggy copper]

How would i change it so Luckperms doesnt disable oP

[hasty tree]

it doesn't? unless you're on sponge, which i know you're not.

[foggy copper]

oh buddy

im definitely on sponge

servers running pixelmon with SpongeForge

[hasty tree]

... then why are you using vault / vaultchatformatter o_O

in that case, you can't disable that. Sponge disables OP when a permission plugin is installed.

[foggy copper]

i dont tknow the prefixes werent working withoutit

[hasty tree]

vault is a bukkit thing, not for sponge

if you want to give yourself OP powers (which you really shouldn't because it breaks plugins) then just give yourself the * permission

[foggy copper]

so theoretically unless i add every single permission to a group i wouldnt be able to be "OP"

oh ok thats cool too

well is there a way to copy and paste permissions into groups

[hasty tree]

not really

unless you change your storage to yaml or something

if you have nucleus there is permission setup command

but that only applies to nucleus perms

[foggy copper]

ok well now i cant even run any lp commands it just keeps saying what version its running

[hasty tree]

because you haven't given yourself permission to use luckperms from the console like it says to do in the usage guide

!usage

[wanton stratus]

:paperclip: https://github.com/lucko/LuckPerms/wiki/Usage

[foggy quartz]

@elfin egret forgot to give link, sorry https://github.com/lucko/LuckPerms/issues/1405

[wanton stratus]

Hey Lukass! Please don't tag staff members.

[minor stream]

@foggy quartz Wouldn't that be e.Result.ALLOWED? I'm not super familiar with that event, but it wouldn't make sense for the type to have a Result property.

Also, your hastebin link is empty.

[foggy quartz]

Result might be, but wouldn't change outcome. Fixed hastebin (refresh):)

[minor stream]

Oh, scratch that. I was reading Result as if it were an instance, not an enum.

That said, I don't know if fighting bots with a plugin is the right way to go. This sounds like the job for an application firewall. Talk with your hosting provider and inform them that you're getting a lot of bot traffic and they should be able to help you with that. Sorry if that's not the answer you're looking for, though I can't say I see anything immediately wrong with your code.

[foggy quartz]

Works with that line, but server crashes from that line if user disconnects sometimes, not always.

[minor stream]

I don't think it's that line then. It wouldn't make sense to fire a PreLoginEvent before, during, or after disconnecting.

Unfortunately your stack trace doesn't provide anything helpful either. You have a NoSuchElementException thrown by a Map, but it's not going to tell us where that map is.

Sorry I can't be more help. I'm off to bed for now though. I can look into this further when I get on tomorrow.

[foggy quartz]

At least try catching would be good so server wouldn't crash. How would try catch look like there?

[minor stream]

I would wrap removeIf with the try/catch.

try {
    removeIf(() -> myNode);
} catch (SomeException ex) {
    // ...
}```

I forget how to write predicates in Java so have some hybrid C#/Java code

[wheat jay]

LuckPerms is the best but a lot of people still using PermissionEX and GroupManager.
How can we get more people 🤔

[toxic wagon]

It's upto them what they want to use. We aren't going to bully people into using something they don't want to. If they want to switch to Luckperms they will.

[ripe kernel]

I'd love to use LuckPerms... if I could get it to work on my bungeecord server!

[toxic wagon]

@ripe kernel Did you actually do what Turbo said and submitted a Github issue?

[ripe kernel]

@toxic wagon I have no idea how to do that

[wanton stratus]

Hey draexo! Please don't tag staff members.

[ripe kernel]

I have no idea how to do that

[toxic wagon]

https://github.com/lucko/LuckPerms/issues Go there are create a new issue.

[robust atlas]

Is there a luckperms compatible xenforo bridge? I'd like to authenticate forum users as being minecraft players. (So, they can't use the forums unless they are indeed minecraft players on our servers who follow simple steps to authenitcate to the forums) (please @ me so I get notified of replies! Thanks!)

[ripe kernel]

ok, issue open on github.

[foggy quartz]

Is there a command to set a Prefix?

[tired turtle]

/lp user/group <user/group> meta addprefix <weight> <prefix>

[ripe kernel]

now I got this error after updating to the latest bungeecord: WARNING [LuckPerms] Messaging service 'sql' not recognised.

[foggy quartz]

Hello,how to make space between your prefix and your name?

[tired turtle]

When you set it in the command, put it in "" (/lp group <group> meta addprefix <weight> "Prefix ")

[foggy quartz]

Still same.

[tired turtle]

What does LP respond, when you run the command?

[robust atlas]

@ripe kernel first,
are you using the bungeecord version of luckperms on bungeecord?
There is a difference between the bungeecord and bukkit/spigot/paper version of LuckPerms. The b/s/p version cannot run on bungee.

Second, are you using an SQL server? Is it local or remote to that installation?

@tired turtle in the LP config, there's a section for adding section dividers - a white space charecter can be added between double quotes there.

[wanton stratus]

Hey AeSix! Please don't tag staff members.

[robust atlas]

Derp. That was for @foggy quartz >_> Sorry Andre :,(

[glacial night]

sooooo luckperms wont connect to my database and idk why

https://pastebin.com/BeemfCLu

[glacial night]

any help?

[lethal spire]

Could be added a placeholder to get temporary permission from groups?

[obsidian copper]

@elfin egret Did you make or contribute to Bungeegaurd

[wanton stratus]

Hey PixelNotFound! Please don't tag staff members.

[elfin egret]

make

[queen latch]

https://github.com/lucko/Luckperms/wiki/Context

[obsidian copper]

@elfin egret Why did you choose to only support paper?

[wanton stratus]

Hey PixelNotFound! Please don't tag staff members.

[obsidian copper]

and will that work if each server is in its own docker container

So i cant use localhost

but node0.leapmc.net

[queen latch]

@scenic spear yep

[obsidian copper]

Well it supports json

[visual yew]

Any one here knows hot to fix this? If I try to build with off hand item goes back to inventory

[mighty flame]

no way to migrate uperms -> lp

?

[tired turtle]

@scenic spear Small hint: You don't have to hide the Editor-ID/code since nobody could actually do damage with it on your server.
They would need to join your server and actually have permission to run the applyedits command... There's no other way. (tl;dr the editor isn't directly connected to your server, so there's no chance from them to change permissions without being able to use LP commands on the server itself)

[tired turtle]

@foggy quartz no advertising. One and only warning