ivory edge
My airbrush trigger is no longer working (as far as I can tell). I always clean the nozzle thoroughly, and after having this problem, I soaked the body in thinner- to no avail. I'm totally stumped.
In case it matters, this is a neo iwata with the tiny, probably not great iwata air compresser.
prime hare
Heya ! One of the things that has helped me with my airbrush was to take apart the front pieces, let it soak in ISO for about 30 mins and then reassemble it. so far it has helped a lot when things get clogged.
tidal patio
1 - When you press the trigger does air come out of the nozzle?
2 - When you pull back, does the needle move, releasing the nozzle exit?
3.- In general, the paint only flows from the cup forwards, as a rule there is no reason for there to be blockages or for it to be necessary to clean the cup backwards. The trigger presses a small valve that does not usually malfunction, however this could be the case.