#HV/EV main power with automatic shutoff.
23 messages · Page 1 of 1 (latest)
What are you using for the turbine fan material?
I would also like to know this.
looks like vibrant alloy
sorry I was using manasteel, later Desh, there was a small vibrant alloy one in shot but its not really used.
now using large turbines.
How did you made the autoturn on/off?
one mo
Mo?
Got it, is it ok if i will use it in my base?
rs latch, there are energy detector covers on a battery buffer. one is non inverted and the other is inverted. il find the values but it depends on the battery
thats the low level threshold on the left side. inverted
Smart
here is the high level non inverted cover. on the right side.
the potentiometer is set to 13 i belive
also overview of the layout compared to batt buffer.
sure its not my design, i copied it u dont need permission freind.
Thx
then you put machine control covers on the machine controller, and route your control cable to the lower block and it will transmit through it and activate the turbine when battery gets low. yw
i use the same signal for the hydro dam turbine also so you can trigger multiple generators with power from multiple sources.