Help with a weirder big print | 3D Printing | Page 1

gaunt glacierBOT Jan 23, 2026, 8:53 AM

#

AI Help

It sounds like you are experiencing stringing issues with your print. For larger-scale prints that require supports, you can enable support structures in Cura to help prevent the strings. In Cura, you can select either tree supports or normal supports, depending on the complexity of your model and the desired finish. Additionally, adjusting retraction settings and print temperature can also help reduce stringing. You can experiment with these settings to find the best combination for your specific print.

wicked cape Jan 23, 2026, 9:07 AM

#

Oh yeah just checked in on my phone real quick, see those parts on the lower right? They're floating midair, so they can't be printed without supports after all

hallow heath Jan 23, 2026, 9:25 AM

#

Thank you!

#

I will try a test print with normal supports touching building plate and see if that works 👍

gaunt glacierBOT Jan 23, 2026, 11:31 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

hallow heath Jan 23, 2026, 8:02 PM

#

It kinda looks the same on the small scale

#

#

This was with

#

This was without

#

Maybe a different support? Or with it everywhere instead of just touching build plate?

gaunt glacierBOT Jan 23, 2026, 10:06 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

#Help with a weirder big print