#someone PLS help me

1 messages · Page 1 of 1 (latest)

odd trailBOT
#
Could you include more info?

To help you get the best help try to include as much information as you can such as:
• Printer make and model,
• Any Mods,
• Firmware,
• Filament material and temps,
• Slicer,
• Any recent changes,
• What have you tried so far.

Images can really help with debugging a printer! Consider adding some to your post of the print and the printer.

#
AI Help

It sounds like you have tried many different methods to improve bed adhesion, which is great. Here are a few additional suggestions you could try:

  1. Clean your print bed thoroughly with isopropyl alcohol to remove any residue.
  2. Increase the bed temperature slightly to ensure better adhesion.
  3. Check that your nozzle is at the correct distance from the bed. You may need to re-level the bed.
  4. Try using a different brand or type of filament. Some filaments adhere better to certain bed surfaces.

If these suggestions do not improve bed adhesion, feel free to reach out for more assistance.

WARNING: This response is AI generated and may contain errors.
flint ferry
#

bet

#

ok

glacial forum
#

I mean it helps if you don't delete the question