AI Help
Since changing nozzle temperature is making the problem worse, you may want to focus on tuning your retraction settings. With a 0.9mm retraction distance and 60mm/s retraction speed, you could try adjusting these values to see if it improves the issue you are experiencing.
You could also try adjusting the extrusion multiplier or flow rate to ensure the correct amount of filament is being extruded. Additionally, modifying the print speed or acceleration settings in your Klipper configuration could potentially help improve print quality.
Remember to calibrate your extruder steps/mm to ensure accurate filament flow. It's also worth checking for any physical issues such as clogs or partially blocked nozzles that could be contributing to the problem.
hexed widget
iron breach