#Flashforge making weird noises

1 messages · Page 1 of 1 (latest)

sand pivotBOT
#
AI Help

It sounds like your printer is experiencing some issues with filament extrusion. The loud noise and filament oozing in a circle could indicate a clog in the nozzle or a problem with the extrusion mechanism. Here are a few steps you can take to troubleshoot this issue:

  1. Check the filament: Make sure the filament is loaded correctly and that there are no tangles or knots in the spool. Ensure the filament is feeding smoothly into the extruder.

  2. Check the nozzle: It's possible that the nozzle is clogged. Try removing the filament and running a cold pull (also known as atomic pull) to clear out any blockages. You can find tutorials online on how to perform a cold pull for your specific printer.

  3. Adjust the bed leveling: Improper bed leveling can also cause issues with filament adherence. Make sure the bed is properly leveled before starting your print.

  4. Check the slicer settings: Make sure the settings in your slicing software (e.g., layer height, print speed, temperature) ar...

WARNING: This response is AI generated and may contain errors.