#Ender 3 Max Neo Part Chaos + bonus question.

1 messages · Page 1 of 1 (latest)

modest canopyBOT
#
AI Help

It's great that you've acquired an Ender 3 Max Neo and are looking to fix it up. Here are some answers and suggestions:

  1. Cleaning and Reusing Old Nozzles/Blocks: It can be worth trying to clean clogged nozzles and heat blocks, especially if they are not heavily damaged. You can try soaking them in a solvent like acetone or using a small torch to burn off any debris. However, it's also good to have spare parts on hand, so if you have new ones available, it might be simpler to use those instead.

  2. Direct Drive Conversion: When setting up a direct drive system on your Ender 3 Max Neo, you will indeed remove the Bowden tube. You can pull filament through the filament detector without the tube, but make sure to properly secure the tubing so that it doesn't interfere with the filament's movement or get caught on anything as the extruder moves.

Feel free to upload pictures of the parts you're unsure about, and I can help identify them and provide more specific guidance. If yo...

WARNING: This response is AI generated and may contain errors.
modest canopyBOT
# 
BenchyBot

BetaCommands:
  add_printer  Adds a printer to your name.
  belt_freq    Calculates target belt frequency (Hz) for correct tension base...
  belt_tension Calculates the tension (N) in a GT belt based on the measured...
  pi           
  random_thing Find a random thing from thingiverse.
  time         Used to get the current time in a timezone.
  topic        
GCode:
  mg           Used to search Marlin Gcode Commands.
HelpForum:
  solved       
​No Category:
  help         Shows this message

Type ?help command for more info on a command.
You can also type ?help category for more info on a category.
modest canopyBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

modest canopyBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.