It sounds like you are experiencing some common issues with printing PLA+ filament. Here are some tips to help troubleshoot the stringing and globbing:
Stringing: Stringing can occur when the temperature is too high or the retraction settings are not optimal. Try lowering the printing temperature slightly and adjusting the retraction settings in your slicing software.
Globbing: Globbing can be a result of over-extrusion or the nozzle being too close to the bed. Make sure your printer is properly calibrated and the nozzle is at the correct height from the bed. You can also try reducing the flow rate or adjusting the extrusion multiplier in your slicer.
Check your filament diameter settings in the slicing software to ensure it matches the actual diameter of the filament you are using. This can affect the amount of material extruded.
By making these adjustments and fine-tuning your printer settings, you should be able to improve the print quality when using PLA+ filament.
lament inlet