AI Help
It sounds like you may be experiencing issues with your print bed leveling or Z-axis height. Since you mentioned that you have already manually leveled the bed, it's possible that the Z-axis endstop or offset settings need adjustment. Check the slicer software settings to ensure the correct Z-axis height is set. Additionally, make sure the first layer is not too close to the bed, which can cause "squashing" of subsequent layers. Double-check your slicing settings and consider recalibrating your Z-offset. If the issue persists, it could also be related to a partial clog in the nozzle affecting the extrusion flow. Cleaning or replacing the nozzle might help resolve the problem.
hearty dome
dire bobcat