Homing the wrong way | 3D Printing | Page 1

errant cradleBOT Sep 16, 2024, 3:01 AM

#

Could you include more info?

To help you get the best help try to include as much information as you can such as:
• Printer make and model,
• Any Mods,
• Firmware,
• Filament material and temps,
• Slicer,
• Any recent changes,
• What have you tried so far.

Images can really help with debugging a printer! Consider adding some to your post of the print and the printer.

#

AI Help

It sounds like a stepper motor direction issue. Check your stepper motor wiring and make sure they are connected correctly. You may need to adjust the direction of the X-axis motor in your printer's firmware configuration. Make sure the motor direction is set to move in the correct direction for homing. If you need further assistance, feel free to share your config settings for more specific troubleshooting.

foggy needle Sep 16, 2024, 3:23 AM

#

!close

#

it opened a ticket like 3 hours after i tried to make it lol

#

how to close :[

rough anvil Sep 16, 2024, 3:37 AM

#

!solved

foggy needle Sep 16, 2024, 4:12 AM

#

!solved

#

!close

errant cradleBOT Sep 16, 2024, 4:13 AM

#

Is your problem solved? / No longer need this channel?
You can close a help channel with ?solved when it is no longer needed.

foggy needle Sep 16, 2024, 4:13 AM

#

?solved

#Homing the wrong way